FUEL SYSTEM
PUMP GP-FUEL INJECTIONGOVERNOR GP
TORQUE CONTROL GP
BASIC ENGINE
PARTS GP-MISCELLANEOUSSERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITSFUEL SYSTEM
PUMP GP-FUEL INJECTION
#SEBP61100010
4P-9827: PUMP GP-FUEL INJECTION
4P-9827 PUMP GP-FUEL INJECTION
PART OF 111-3769 PUMP GP-FUEL INJECTION
PART OF 111-3769 PUMP GP-FUEL INJECTION
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-1927 | [1] | RING-RETAINING | |
| 2. | 8N-1415 | [1] | SPRING-CHECK | |
| 3. | 6I-1327 | [1] | BONNET-VALVE | |
| 4. | 1W-6987 | [1] | VALVE AS-CHECK (FUEL) | |
| 5. | 4P-9830 | [1] | PLUNGER AS | |
| 6. | 7C-5278 | [1] | BOLT-PLUNGER GEAR (FUEL PUMP) | |
| 7. | 7N-1066 | [1] | WASHER-RETAINING | |
| 8. | 7C-9966 | [1] | INSERT | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP61100011
7C-8992: SEAL GP-PUMP
7C-8992 SEAL GP-PUMP
PART OF 274-5178, 274-5190 CONVERSION AR-ENGINE
PART OF 274-5178, 274-5190 CONVERSION AR-ENGINE
For full view, you need register
#SEBP61100012
1W-3597: TORQUE CONTROL GP
1W-3597 TORQUE CONTROL GP
PART OF 274-5178, 274-5190 CONVERSION AR-ENGINE
PART OF 274-5178, 274-5190 CONVERSION AR-ENGINE
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-1796 C | [1] | SPACER (1.549-MM THK) | |
| 2. | 8N-7523 | [1] | SPRING-TORQUE | |
| 3. | 2W-7234 C | [1] | BAR-LOAD STOP (4-MM) | |
| 4. | 6L-5897 C | [2] | BOLT (1/4-20X0.875-IN) | |
| 5. | 8M-9062 | [1] | RETAINER-SPRING (3.05-MM THK) | |
| 6. | 2P-2685 | [1] | SPACER (0.635-MM THK) | |
| 7. | 1P-6452 | [1] | INSULATOR | |
| 8. | 7W-5700 C | [1] | CONTACT | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP61100013
274-5181: KIT-ENGINE PARTS
274-5181 KIT-ENGINE PARTS
PART OF 274-5178 CONVERSION AR-ENGINE
FOR USE WITH REHS2609, 3306 EMISSIONS UPGRADE GROUP RETROFIT TO TIER I EQUIVALENT LEVEL, FOR 140G MOTOR GRADER, (72V)RM333- 08Z1-UP, 2W-0820 & 2W-4487 ENGINE ARRANGEMENTS
PART OF 274-5178 CONVERSION AR-ENGINE
FOR USE WITH REHS2609, 3306 EMISSIONS UPGRADE GROUP RETROFIT TO TIER I EQUIVALENT LEVEL, FOR 140G MOTOR GRADER, (72V)RM333- 08Z1-UP, 2W-0820 & 2W-4487 ENGINE ARRANGEMENTS
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 284-7808 Y | [1] | KIT-HARDWARE (EMISSION RETROFIT) | ||
| 9N-5328 | [1] | ADAPTER | ||
| 6N-6033 | [2] | CLIP | ||
| 100-5727 | [1] | COUPLING-EXHAUST | ||
| 118-4728 | [1] | ELBOW | ||
| 1H-7666 | [1] | GASKET | ||
| 155-4653 | [1] | SOLENOID AS | ||
| 4B-4274 | [1] | WASHER (5.5X13X1.2-MM THK) | ||
| 6V-8377 | [2] | NUT (8-32-THD) | ||
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 7E-9302 | [1] | TUBE AS-OIL | ||
| 7E-9303 | [1] | TUBE AS-OIL DRAIN | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61100014
274-5182: KIT-ENGINE PARTS
274-5182 KIT-ENGINE PARTS
PART OF 274-5190 CONVERSION AR-ENGINE
FOR USE WITH REHS2610, 3306 EMISSIONS UPGRADE GROUP RETROFIT TO TIER I EQUIVALENT LEVEL, FOR 140G-VHP MOTOR GRADER, (72V)RM333- 08Z1-UP, 7W-1766 ENGINE ARRANGEMENT
PART OF 274-5190 CONVERSION AR-ENGINE
FOR USE WITH REHS2610, 3306 EMISSIONS UPGRADE GROUP RETROFIT TO TIER I EQUIVALENT LEVEL, FOR 140G-VHP MOTOR GRADER, (72V)RM333- 08Z1-UP, 7W-1766 ENGINE ARRANGEMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 284-7808 Y | [1] | KIT-HARDWARE (EMISSION RETROFIT) | ||
| 9N-5328 | [1] | ADAPTER | ||
| 4P-8586 | [1] | ADAPTER-SOLENOID | ||
| 4N-8445 | [2] | BOLT (1/4-20X1.25-IN) | ||
| 128-7794 | [1] | BOLT-TAMPERPROOF (1/4-20X1.125-IN) | ||
| 128-7796 | [1] | BOLT-TAMPERPROOF (1/4-20X3.75-IN) | ||
| 6I-3791 | [1] | BRACKET | ||
| 6I-4081 | [1] | BRACKET AS | ||
| 4K-9097 | [2] | NUT-WELD (5/16-18-THD) | ||
| 6I-4419 | [1] | CLIP | ||
| 6N-6033 | [2] | CLIP | ||
| 6V-1901 | [1] | CLIP | ||
| 9G-9150 | [2] | CLIP | ||
| 3J-7352 | [1] | CONNECTOR | ||
| 100-5727 | [1] | COUPLING-EXHAUST | ||
| 118-4728 | [1] | ELBOW | ||
| 2N-1287 | [1] | ELBOW-FLARED | ||
| 1H-7666 | [1] | GASKET | ||
| 9W-0274 | [1] | RING-LOCK | ||
| 033-6044 | [1] | SEAL-O-RING | ||
| 3E-6424 | [1] | SOLENOID AS | ||
| 7N-7779 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 8A-8563 | [2] | SPACER (8.6X20X10-MM THK) | ||
| 110-0018 | [1] | TUBE AS | ||
| 7E-9302 | [1] | TUBE AS-OIL | ||
| 7E-9303 | [1] | TUBE AS-OIL DRAIN | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61100015
8C-8741: KIT-GASKET
8C-8741 KIT-GASKET -REAR STRUCTURE
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Information:
FUEL SYSTEM
PUMP GP-FUEL INJECTION
Truck Engine News
Engine News
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
2008/11/17
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM TO INSPECT FUEL SETTINGS, RELABEL, AND RESET IF NECESSARY CERTAIN 3306 PCNA INDUSTRIAL ENGINES USED IN UNDERGROUND COAL MINING APPLICATIONS
PRODUCT IMPROVEMENT PROGRAM TO INSPECT FUEL SETTINGS, RELABEL, AND RESET IF NECESSARY CERTAIN 3306 PCNA INDUSTRIAL ENGINES USED IN UNDERGROUND COAL MINING APPLICATIONS
PRODUCT IMPROVEMENT PROGRAM TO INSPECT FUEL SETTINGS, RELABEL, AND RESET IF NECESSARY CERTAIN 3306 PCNA INDUSTRIAL ENGINES USED IN UNDERGROUND COAL MINING APPLICATIONS
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Air Compressor Governor<BR> (Bendix Corp. 101654)
120G, 130G & 140G MOTOR GRADERS AIR SYSTEM AND BRAKES
120G, 130G & 140G MOTOR GRADERS AIR SYSTEM AND BRAKES
Air Compressor Governor<BR> (Clayton Dewandre APSA4285E-W1)
120G, 130G & 140G MOTOR GRADERS AIR SYSTEM AND BRAKES
120G, 130G & 140G MOTOR GRADERS AIR SYSTEM AND BRAKES
Fuel Injection Nozzle <BR> 8N7005 Nozzle Assembly
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
Fuel Injection Pump Housing And Governor
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Fuel Injection Pump Housing And Governor
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Fuel Injection Pump Housing And Governor
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
1981/09/14
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
1982/02/08
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
1982/11/08
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
1983/12/05
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
1985/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
1986/06/16
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
1977/02/14
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
1978/02/06
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
1988/01/04
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
1993/06/14
Manufacturing And Design Improvements Incorporated Into Fuel Injection Nozzle Assemblies{1254}
1997/07/14
1997/07/14
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
2008/12/01
Cat<SUP>®</SUP> Reman Announces Improved HEUI Fuel Pumps for Certain Machine Engines {1251}
2014/10/20
2014/10/20
Improved Fuel Injectors Are Now Used on Certain C7 and C9 Machine Engines {1251, 1254, 1290, 1713}
Improved Fuel Injectors Are Now Used on Certain C7 and C9 Machine Engines {1251, 1254, 1290, 1713}
Improved Fuel Injectors Are Now Used on Certain C7 and C9 Machine Engines {1251, 1254, 1290, 1713}
