BASIC ENGINE
FLYWHEEL GPGEAR GP
FLYWHEEL GP
HOUSING GP-FLYWHEEL
GEAR GP
CYLINDER BLOCK GP
ENGINE ARRANGEMENT
CONVERSION GP-ENGINEBASIC ENGINE
FLYWHEEL GP
#SEBP61140040
7N-4851: FLYWHEEL GP
7N-4851 FLYWHEEL GP
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS#SEBP61140041
8N-7174: GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
S/N 50Y1305-UP
S/N 50Y1305-UP
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-2895 | [1] | GEAR-CRANKSHAFT (92-TEETH) | |
| 2. | 5R-7136 | [1] | WASHER-SEALING | |
| 3. | 5R-7137 | [2] | WASHER-SEALING | |
| 4. | 7C-3258 | [1] | WASHER AS-THRUST | |
| 4A. | 7N-2047 | [1] | DOWEL | |
| 5. | 7C-3260 | [1] | SHAFT | |
| 6. | 7E-0275 | [1] | GEAR-WATER PUMP DRIVE (69-TEETH) | |
| 7. | 7N-5239 | [1] | SHAFT AS-PUMP DRIVE | |
| 7A. | 8T-2153 | [1] | SETSCREW-SOCKET (1/4-28X0.31-IN) | |
| 8. | 7N-5245 | [1] | ADAPTER AS-PUMP (WATER) | |
| 8A. | 127-5400 | [1] | BUSHING | |
| 9. | 7N-5246 | [2] | WASHER-THRUST | |
| 10. | 144-8263 C | [1] | GEAR AS-IDLER (53-TEETH) | |
| 10A. | 140-9597 | [1] | BUSHING | |
| 11. | 235-3546 | [1] | SEAL-O-RING | |
| 12. | 259-4598 | [2] | SEAL-O-RING | |
| 13. | 278-4287 | [1] | ADAPTER AS-PUMP (OIL) | |
| 13A. | 127-5400 | [1] | BUSHING | |
| 14. | 0S-1590 | [5] | BOLT (3/8-16X2-IN) | |
| 15. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 16. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 17. | 3S-1307 | [12] | BOLT-12 POINT HEAD (3/8-16X2-IN) | |
| 18. | 4B-3388 | [4] | BOLT (5/16-18X1.125-IN) | |
| 19. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 6V-3348 | [1] | SEAL-O-RING | |
| 22. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 23. | 9X-8879 | [2] | BOLT (1/2-13X5.5-IN) | |
| 24. | 6K-3771 BC | [12] | BOLT-12 POINT HEAD (7/16-14X1.5-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP61140042
122-9281: GEAR GP-FRONT
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-2895 | [1] | GEAR-CRANKSHAFT (92-TEETH) | |
| 2. | 2W-7320 | [1] | GEAR-ACCESSORY DRIVE (46-TEETH) | |
| 3. | 5R-7136 | [2] | WASHER-SEALING | |
| 4. | 5R-7137 | [2] | WASHER-SEALING | |
| 5. | 7C-3258 | [1] | WASHER AS-THRUST | |
| 5A. | 7N-2047 | [1] | DOWEL | |
| 6. | 7C-3259 | [1] | SHAFT | |
| 7. | 7N-5239 | [1] | SHAFT AS-PUMP DRIVE | |
| 7A. | 8T-2153 | [1] | SETSCREW-SOCKET (1/4-28X0.31-IN) | |
| 8. | 7N-5245 | [1] | ADAPTER AS-PUMP | |
| 8A. | 127-5400 | [1] | BUSHING | |
| 9. | 7N-5246 | [2] | WASHER-THRUST | |
| 10. | 116-3242 | [1] | GEAR AS-IDLER (66-TEETH) | |
| 10A. | 116-1365 | [1] | BUSHING | |
| 11. | 235-3546 | [1] | SEAL-O-RING | |
| 12. | 259-4598 | [1] | SEAL-O-RING | |
| 13. | 278-4287 | [1] | ADAPTER AS-PUMP | |
| 13A. | 127-5400 | [1] | BUSHING | |
| 14. | 0S-1590 | [5] | BOLT (3/8-16X2-IN) | |
| 15. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 16. | 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | |
| 17. | 3S-1307 | [12] | BOLT-12 POINT HEAD (3/8-16X2-IN) | |
| 18. | 4B-3388 | [4] | BOLT (5/16-18X1.125-IN) | |
| 19. | 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 6K-3771 | [12] | BOLT-12 POINT HEAD (7/16-14X1.5-IN) | |
| 22. | 6V-3348 | [1] | SEAL-O-RING | |
| 23. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 9X-8879 | [2] | BOLT (1/2-13X5.5-IN) | |
| 25. | 259-4598 | [1] | SEAL-O-RING |
#SEBP61140043
124-8395: GEAR GP-REAR
124-8395 GEAR GP-REAR -CAMSHAFT DRIVE
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-1307 | [12] | BOLT-12 POINT HEAD (3/8-16X2-IN) | |
| 2. | 114-3372 | [1] | GEAR AS-CLUSTER (92/35-TEETH) | |
| 2A. | 101-1372 | [1] | BEARING-SLEEVE | |
| 3. | 101-1366 | [1] | SHAFT-GEAR (CLUSTER) | |
| 4. | 8M-2530 | [4] | BOLT-12 POINT HEAD (1/2-13X1.25-IN) | |
| 5. | 101-1365 | [1] | PLATE-THRUST | |
| 6. | 0L-1351 | [4] | BOLT (3/8-16X0.875-IN) | |
| 7. | 101-1364 | [2] | GEAR AS-IDLER (69-TEETH) | |
| (EACH INCLUDES) | ||||
| 7A. | 125-9751 | [1] | BEARING-SLEEVE | |
| 8. | 101-1367 | [2] | SHAFT-IDLER | |
| 9. | 5P-8248 | [2] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 10. | 9X-8887 | [2] | BOLT (3/4-10X3-IN) | |
| 11. | 1B-4367 | [4] | BOLT (5/8-11X3-IN) | |
| 12. | 101-1368 | [2] | WASHER-THRUST (19.5X106X1.9-MM THK) | |
| 13. | 101-1369 | [2] | GEAR-CAMSHAFT DRIVE (70-TEETH) | |
| 14. | 4W-4586 | [1] | PLATE | |
| 15. | 101-1370 | [1] | GEAR-CRANKSHAFT (92-TEETH) | |
| 16. | 8S-2331 | [2] | BOLT-12 POINT HEAD (5/8-11X2-IN) | |
| 17. | 7E-5324 | [1] | RING | |
#SEBP61140044
101-1269: HOUSING GP-FLYWHEEL
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 222-9921 | [1] | HOUSING-FLYWHEEL | |
| 2. | 1D-4590 | [16] | BOLT (5/8-11X4.75-IN) | |
| 3. | 5P-8245 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 4. | 5P-8247 | [16] | WASHER-HARD (17X32X3.5-MM THK) | |
| 5. | 8S-9089 | [4] | BOLT (1/2-13X4.5-IN) | |
| 6. | 9S-1374 | [2] | BOLT (1/2-13X8-IN) | |
| 7. | 2B-0947 | [6] | BOLT (1/2-13X2.25-IN) | |
| 8. | 9X-8875 | [4] | BOLT (1/2-13X3.5-IN) | |
| 9. | 5P-8245 B | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 6M-9613 B | [2] | BOLT (1/2-13X9-IN) | |
| B | USE AS REQUIRED | |||
#SEBP61140045
101-1269: HOUSING GP-FLYWHEEL
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 309-4550 C | [1] | GASKET | |
| 2. | 340-5015 C | [1] | HOUSING-FLYWHEEL | |
| 3. | 1D-4590 | [16] | BOLT (5/8-11X4.75-IN) | |
| 4. | 3K-0360 | [1] | SEAL-O-RING | |
| 5. | 5P-8245 B | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 5P-8247 | [16] | WASHER-HARD (17X32X3.5-MM THK) | |
| 7. | 8S-9089 | [4] | BOLT (1/2-13X4.5-IN) | |
| 8. | 9S-1374 | [2] | BOLT (1/2-13X8-IN) | |
| 9. | 9S-4185 | [1] | PLUG | |
| 10. | 9X-8873 | [6] | BOLT (1/2-13X2.25-IN) | |
| 11. | 9X-8875 | [4] | BOLT (1/2-13X3.5-IN) | |
| 12. | 5P-8245 B | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 6M-9613 B | [2] | BOLT (1/2-13X9-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP61140046
4P-5426: HOUSING GP-FRONT
4P-5426 HOUSING GP-FRONT -ACCESSORY DRIVE
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1587 | [4] | BOLT (1/2-13X1.75-IN) | |
| 2. | 1D-4593 | [10] | BOLT (5/8-11X5.5-IN) | |
| 3. | 102-8634 | [1] | HOUSING-ACCESSORY DRIVE | |
| 4. | 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | |
| 5. | 2A-5220 | [6] | PLUG | |
| 6. | 8T-6765 B | [7] | PLUG-PIPE (1/4-18-THD) | |
| 7. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 8. | 8T-6758 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 9. | 9H-8260 | [4] | BOLT (1/2-13X6.25-IN) | |
| 10. | 7N-3049 | [1] | GASKET | |
| B | USE AS REQUIRED | |||
#SEBP61140047
204-5447: JET AS-PISTON COOLING
204-5447 JET AS-PISTON COOLING
PART OF 20R-1078, 350-2154, 350-2157 KIT-ENGINE CONVERSION
FOR USE WITH ONE PIECE PISTONS ONLY
PART OF 20R-1078, 350-2154, 350-2157 KIT-ENGINE CONVERSION
FOR USE WITH ONE PIECE PISTONS ONLY
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| NO SERVICED PARTS | ||||
#SEBP61140048
20R-1075: KIT-ENGINE CONVERSION
20R-1075 KIT-ENGINE CONVERSION
S/N 66Z579-UP
3512B MUI TO TIER I EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO UPGRADE THE 1W-4219 MUI ENGINE ARRANGEMENT TO 232-2513 TIER I ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 357-1756 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3512B, 1200 RPM, 66Z00579-UP
FIELD INSTALLATION
S/N 66Z579-UP
3512B MUI TO TIER I EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO UPGRADE THE 1W-4219 MUI ENGINE ARRANGEMENT TO 232-2513 TIER I ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 357-1756 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3512B, 1200 RPM, 66Z00579-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 231-9999 Y | [1] | BOX GP-JUNCTION | ||
| (ABOVE PART SHIPPED LOOSE) | ||||
| 7E-2580 | [12] | CLAMP-INJECTOR | ||
| 7F-8698 | [12] | BOLT (7/16-14X3.5-IN) | ||
| 20R-1264 | [12] | INJECTOR GP-FUEL | ||
| (EACH INCLUDES) | ||||
| 245-4907 | [1] | SEAL-O-RING | ||
| 245-4908 | [1] | SEAL-O-RING | ||
| (ABOVE PARTS ARE PART OF GROUP 144-0726) | ||||
| 0R-7037 | [2] | TURBOCHARGER GP | ||
| (EACH INCLUDES) | ||||
| 113-5180 Y | [1] | TURBOCHARGER GP | ||
| 2N-2765 | [8] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | ||
| 6V-6753 | [16] | BOLT-HIGH TEMPERATURE (3/8-16X1.375-IN) | ||
| 188-0472 | [4] | FLANGE-HALF | ||
| 188-0473 | [4] | FLANGE-HALF | ||
| (ABOVE PARTS ARE PART OF GROUP 107-9524) | ||||
| 0S-1594 | [7] | BOLT (3/8-16X1-IN) | ||
| 1T-0765 | [1] | BOLT (3/8-16X1-IN) | ||
| 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5N-1939 | [1] | COVER | ||
| 5N-1940 | [1] | GASKET | ||
| 6V-3348 | [1] | SEAL-O-RING | ||
| 235-3546 | [1] | SEAL-O-RING | ||
| 10R-1072 Y | [1] | PUMP GP-WATER | ||
| (ABOVE PARTS ARE PART OF GROUP 9Y-8175) | ||||
| 0L-1143 | [4] | BOLT (3/8-16X2.5-IN) | ||
| 1B-9575 | [4] | BOLT (5/16-18X1.56-IN) | ||
| 1L-4031 | [1] | TEE-SERVICE | ||
| 2V-4387 | [4] | SPACER (10.312X25.4X23.11-MM THK) | ||
| 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 9X-6458 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 10R-8105 | [1] | CONTROL GP-ENGINE ELECTRONIC | ||
| 118-1656 | [1] | BUSHING-REDUCER | ||
| 155-0576 | [8] | MOUNT-ISOLATION | ||
| 231-7070 | [1] | BRACKET | ||
| (ABOVE PARTS ARE PART OF GROUP 231-7069) | ||||
| 0L-2070 | [24] | BOLT (3/8-16X2.25-IN) | ||
| 0R-1620 | [12] | ROCKER ARM AS | ||
| (EACH INCLUDES) | ||||
| 8N-7197 | [1] | SOCKET-ARM | ||
| 230-2620 | [1] | BUSHING | ||
| 0R-1621 | [24] | ROCKER ARM AS | ||
| (EACH INCLUDES) | ||||
| 8N-7197 | [1] | SOCKET-ARM | ||
| 230-2620 | [1] | BUSHING | ||
| 0S-1615 | [12] | BOLT (1/4-20X0.75-IN) | ||
| 5P-0537 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 5P-7530 | [12] | SEAL-O-RING | ||
| 6J-2245 | [12] | SEAL-O-RING | ||
| 7E-6508 | [12] | CAP AS | ||
| 8D-7942 | [24] | BOLT-12 POINT HEAD (5/8-11X6.5-IN) | ||
| 9X-0352 | [12] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 10R-3139 | [12] | LIFTER AS | ||
| 282-7944 | [1] | LIFTER AS-INJECTOR | ||
| 20R-1626 | [24] | LIFTER AS-VALVE | ||
| (EACH INCLUDES) | ||||
| 416-8319 | [1] | LIFTER AS-VALVE | ||
| 100-3877 | [12] | RETAINER-SPRING | ||
| 100-3878 | [12] | SPRING-INJECTOR | ||
| 100-3879 | [12] | PUSHROD-INJECTOR | ||
| 100-3880 | [24] | PUSHROD-VALVE | ||
| 132-6469 Y | [12] | HARNESS AS-WIRING | ||
| 154-6389 | [36] | BUTTON | ||
| 230-2633 | [12] | SHAFT AS (ROCKER ARM) | ||
| (EACH INCLUDES) | ||||
| 155-4094 | [1] | PIN-SPRING | ||
| 240-7032 | [12] | SEAL | ||
| 247-8341 Y | [12] | BASE GP-VALVE COVER | ||
| 317-1121 | [12] | NUT-JAM (5/8-18-THD) | ||
| 380-4843 | [12] | SCREW-ADJUSTING (5/8-18X2.375-IN) | ||
| (ABOVE PARTS ARE PART OF GROUP 224-9869) | ||||
| 1A-2029 | [7] | BOLT (3/8-16X1.125-IN) | ||
| 1D-4540 | [4] | BOLT (5/16-18X2.75-IN) | ||
| 2V-4387 | [4] | SPACER (10.312X25.4X23.11-MM THK) | ||
| 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 8N-9885 | [1] | GASKET-COVER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 10R-8105 | [1] | CONTROL GP-ENGINE ELECTRONIC | ||
| 111-0349 | [1] | BRACKET-MODULE | ||
| 155-0576 | [8] | MOUNT-ISOLATION | ||
| (ABOVE PARTS ARE PART OF GROUP 220-2677) | ||||
| 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | ||
| 3E-6919 | [72] | BOLT (1/2-13X2.25-IN) | ||
| 4P-7680 | [16] | SPACER (10.5X22.5X15-MM THK) | ||
| 5P-1076 | [5] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 6H-1717 | [3] | BOLT (1/2-13X1.125-IN) | ||
| 7B-3235 | [1] | BOLT (1/2-13X1.375-IN) | ||
| 7L-6443 | [72] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 9L-7373 | [52] | BOLT-HIGH TEMPERATURE (3/8-16X2-IN) | ||
| 9L-9132 | [2] | WASHER (10.2X25.5X2.5-MM THK) | ||
| 100-3145 | [1] | MANIFOLD-EXHAUST (FRONT, RH) | ||
| 100-3146 | [4] | MANIFOLD-EXHAUST (REAR, RH) | ||
| 100-3147 | [1] | MANIFOLD-EXHAUST (FRONT, LH) | ||
| 100-3148 | [4] | MANIFOLD-EXHAUST (INTERMEDIATE, LH) | ||
| 110-8314 | [144] | WASHER (10.3X18.3X2.66-MM THK) | ||
| 116-9863 | [1] | BRACKET | ||
| 125-9754 | [1] | MANIFOLD-EXHAUST (REAR, LH) | ||
| 125-9754 | [1] | MANIFOLD-EXHAUST (REAR, LH) | ||
| 128-9508 | [1] | MANIFOLD-EXHAUST (REAR, RH) | ||
| 207-1364 | [10] | BELLOWS AS | ||
| 229-5332 | [12] | SEAL | ||
| 229-5333 | [20] | SEAL | ||
| 254-3261 | [1] | BRACKET AS (RH) | ||
| 254-3269 | [1] | BRACKET (LH) | ||
| (ABOVE PARTS ARE PART OF GROUP 129-5488) | ||||
| 1A-9579 | [4] | BOLT (5/16-18X1.5-IN) | ||
| 2B-2695 | [1] | BOLT (5/16-18X0.875-IN) | ||
| 4P-9226 | [1] | BRACKET | ||
| 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 031-4155 | [1] | LOCKNUT (5/16-18-THD) | ||
| 101-4199 | [1] | COVER AS | ||
| 262-6104 | [1] | CAP AS-ENGINE OIL FILLER | ||
| 272-0760 | [1] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF GROUP 112-6033) | ||||
| 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | ||
| 0S-1590 | [7] | BOLT (3/8-16X2-IN) | ||
| 0S-1594 | [2] | BOLT (3/8-16X1-IN) | ||
| 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | ||
| 1A-2029 | BOLT (3/8-16X1.125-IN) | |||
| 4P-0870 | [4] | MOUNT-FLEXIBLE | ||
| 5M-2894 | [23] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-8210 | [1] | SEAL-O-RING | ||
| 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 7N-4940 | [2] | BRACKET | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 8T-9368 | [2] | BOLT (1/4-20X2.25-IN) | ||
| 8T-9377 | [1] | BOLT (3/8-16X2.25-IN) | ||
| 9S-8752 | [10] | NUT-FULL (3/8-16-THD) | ||
| 133-6484 | [1] | COVER-BOX | ||
| 134-6275 | [2] | BRACKET | ||
| 253-6217 | [1] | BRACKET AS | ||
| 254-3402 | [1] | BRACKET | ||
| (ABOVE PARTS ARE PART OF GROUP 253-6218) | ||||
| 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | ||
| 0S-0509 | [6] | BOLT (3/8-16X0.75-IN) | ||
| 0S-1588 | [12] | BOLT (3/8-16X1.25-IN) | ||
| 0S-1590 | [4] | BOLT (3/8-16X2-IN) | ||
| 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [6] | BOLT (3/8-16X1-IN) | ||
| 3A-3692 | [2] | CLIP | ||
| 4P-7581 | [24] | CLIP | ||
| 5M-2894 | [23] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 5P-3426 | [1] | ELBOW | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 6V-1581 | [1] | CLIP (SLOT) | ||
| 6V-1582 | [1] | CLIP (TAB) | ||
| 6V-9330 | [2] | ELBOW | ||
| 7G-5984 | [4] | CLIP (TAB) | ||
| 7G-5985 | CLIP (SLOT) | |||
| 7H-1911 | [2] | BOLT (1/2-13X9.375-IN) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 8T-2353 | [1] | ADAPTER | ||
| 9G-5127 | [1] | BREATHER AS (AIR) | ||
| 9G-8140 | [4] | SPACER (10.5X25X15-MM THK) | ||
| 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | ||
| 9X-0262 | [1] | ADAPTER | ||
| 9X-6458 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 9X-6772 | [33] | STRAP-CABLE | ||
| 001-9440 | [1] | CONNECTOR | ||
| 111-3684 | [1] | HOSE AS | ||
| 135-9941 | [1] | ADAPTER | ||
| 212-3423 Y | [2] | SENSOR GP-TEMPERATURE | ||
| 212-3425 Y | [2] | SENSOR GP-EXHAUST TEMPERATURE | ||
| 212-3426 Y | [2] | SENSOR GP-SPEED | ||
| 214-7568 | [4] | SEAL-O-RING | ||
| 245-0522 | [1] | BRACKET | ||
| 245-0523 | BRACKET | |||
| 275-6469 | [4] | LINK-SERVO | ||
| 279-2064 Y | [1] | HARNESS AS-ENGINE (LH) | ||
| 295-4636 Y | [2] | SENSOR GP-SPEED | ||
| 304-5666 Y | [4] | SENSOR GP-PRESSURE | ||
| 304-5667 Y | [1] | SENSOR GP-PRESSURE | ||
| 348-9012 Y | [1] | HARNESS AS-ENGINE (RH) | ||
| (ABOVE PARTS ARE PART OF GROUP 232-0012) | ||||
| 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | ||
| 2W-0752 | [1] | GASKET | ||
| 117-0066 | [1] | BRACKET-MOUNTING | ||
| (ABOVE PARTS ARE PART OF GROUP 271-7761) | ||||
| 1N-3482 | [1] | ADAPTER | ||
| 146-3740 Y | [1] | DAMPER GP | ||
| (ABOVE PARTS ARE PART OF GROUP 8N-0339) | ||||
| 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | ||
| (ABOVE PARTS ARE PART OF GROUP 112-4921) | ||||
| 10R-4343 | [12] | PISTON & ROD GP | ||
| (EACH INCLUDES) | ||||
| 0R-9200 | [1] | ROD AS-CONNECTING | ||
| 7N-2043 | [1] | DOWEL | ||
| 7N-2405 | [4] | BOLT-CONNECTING ROD | ||
| 118-1655 | [1] | BUSHING (CONNECTING ROD) | ||
| 144-5695 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 211-7826 | [1] | LINER-CYLINDER BLOCK | ||
| 214-6066 | [1] | RING-PISTON (TOP) | ||
| 223-6361 | [1] | RING-PISTON (OIL) | ||
| 253-1238 | [2] | RETAINER-PIN | ||
| 353-5995 | [1] | KIT-SEAL (CYLINDER) | ||
| 7N-2046 | [3] | SEAL-O-RING | ||
| 8N-4707 | [1] | BAND-FILLER | ||
| 352-6061 | [1] | SEAL-LINER | ||
| (ABOVE PARTS ARE PART OF GROUP 281-6139) | ||||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 107-3759 | [2] | SEAL | ||
| 282-8217 | [1] | CORE AS-AFTERCOOLER | ||
| (ABOVE PARTS ARE PART OF GROUP 107-7196) | ||||
| 101-1198 | [14] | BEARING-CAMSHAFT | ||
| (ABOVE PARTS ARE PART OF GROUP 240-6651) | ||||
| 1A-9579 | [4] | BOLT (5/16-18X1.5-IN) | ||
| 4W-3027 | [1] | BREATHER AS (CRANKCASE) | ||
| 4W-3034 | [1] | CLAMP-HOSE | ||
| 5P-0597 | [1] | CLAMP-HOSE | ||
| 7N-7820 | [1] | BOOT | ||
| 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 033-6031 | [1] | SEAL-O-RING | ||
| 101-4199 | [3] | COVER AS | ||
| 141-7143 | [1] | HOSE-ELBOW | ||
| 180-3007 | [1] | CLAMP-HOSE | ||
| 272-0760 | [3] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF GROUP 247-4695) | ||||
| 144-0712 | [1] | CAMSHAFT AS | ||
| 4N-1650 | [1] | DOWEL | ||
| 144-0713 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| 144-0714 | [1] | CAMSHAFT AS | ||
| 4N-1650 | [1] | DOWEL | ||
| 144-0715 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| (ABOVE PARTS ARE PART OF GROUP 143-8727) | ||||
| 101-4197 | [8] | COVER | ||
| 272-0760 | [8] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF GROUP 101-0831) | ||||
| 101-1364 | [2] | GEAR AS-IDLER (69-TEETH) | ||
| (EACH INCLUDES) | ||||
| 125-9751 | [1] | BUSHING | ||
| 101-1366 | [1] | SHAFT-GEAR (CLUSTER) | ||
| 101-1367 | [2] | SHAFT-IDLER | ||
| 101-1369 | [2] | GEAR-CAMSHAFT DRIVE (70-TEETH) | ||
| 101-1370 | [1] | GEAR-CRANKSHAFT (92-TEETH) | ||
| 114-3372 | [1] | GEAR AS-CLUSTER (92/35-TEETH) | ||
| 101-1372 | [1] | BUSHING | ||
| (ABOVE PARTS ARE PART OF GROUP 124-8395) | ||||
| 20R-0695 Y | [12] | CYLINDER HEAD GP | ||
| (ABOVE PARTS ARE PART OF GROUP 299-3521) | ||||
| 222-9921 | [1] | HOUSING-FLYWHEEL | ||
| (ABOVE PARTS ARE PART OF GROUP 101-1269) | ||||
| 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | ||
| 2A-5220 | [6] | PLUG | ||
| (ABOVE PARTS ARE PART OF GROUP 4P-5426) | ||||
| 0S-0509 | [4] | BOLT (3/8-16X0.75-IN) | ||
| 4P-4642 | [1] | RETAINER-EYE | ||
| 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 193-3286 | [1] | RETAINER-EYE | ||
| (ABOVE PARTS ARE PART OF GROUP 7E-6872) | ||||
| 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | ||
| 0S-0509 | [30] | BOLT (3/8-16X0.75-IN) | ||
| 0S-1590 | [6] | BOLT (3/8-16X2-IN) | ||
| 0S-1594 | [16] | BOLT (3/8-16X1-IN) | ||
| 1T-0720 | [48] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | ||
| 2A-4639 | [24] | BOLT (3/8-16X1.625-IN) | ||
| 4S-5898 | [12] | SEAL-O-RING | ||
| 5L-3773 | [1] | GASKET-EXHAUST ELBOW | ||
| 6V-5103 | [4] | SEAL-O-RING | ||
| 7C-7909 | [10] | ELBOW (AIR INLET) | ||
| 7C-7910 | [2] | ELBOW (AIR INLET) | ||
| 7C-8199 | [12] | FLANGE | ||
| 7W-3145 | [4] | PLATE | ||
| 8M-9024 | [8] | WASHER-HARD (10.2X22.5X5-MM THK) | ||
| 8T-6762 | [8] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | ||
| 9F-2773 | [10] | BOLT (3/8-16X8.5-IN) | ||
| 9X-8874 | [2] | BOLT (1/2-13X3-IN) | ||
| 109-7411 | [2] | SEAL-O-RING | ||
| 111-2077 | [1] | COVER | ||
| 112-1567 | [2] | STRAP | ||
| 122-3374 | [2] | ELBOW (AIR INLET) | ||
| 122-3377 | [1] | PIPE-AIR | ||
| 122-3378 | [1] | PIPE-AIR | ||
| 124-0215 | [1] | ELBOW-TURBOCHARGER EXHAUST | ||
| 129-9528 | [1] | PLATE | ||
| 140-6458 | [1] | BRACKET | ||
| 283-9599 | [1] | MANIFOLD (AIR INLET) | ||
| (ABOVE PARTS ARE PART OF GROUP 144-2884) | ||||
| 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | ||
| 4S-5719 | [1] | SPACER (10.31X25X12.7-MM THK) | ||
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-4589 | [2] | SEAL-O-RING | ||
| 6V-5048 | [1] | SEAL-O-RING | ||
| 7E-6369 | [1] | BRACKET | ||
| 8C-3445 | [1] | CAP-DUST | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 9S-4190 | [2] | PLUG-O-RING | ||
| 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | ||
| 365-4215 | [1] | ADAPTER | ||
| (ABOVE PARTS ARE PART OF GROUP 242-6277) | ||||
| 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | ||
| 2M-9780 | [6] | SEAL-O-RING | ||
| 3J-1907 | [25] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 030-7972 | [1] | ELBOW | ||
| 111-3388 | [1] | TUBE AS | ||
| 111-3389 | [1] | TUBE AS | ||
| 210-2535 | [1] | TUBE AS | ||
| (ABOVE PARTS ARE PART OF GROUP 234-8723) | ||||
| 0L-1143 | [2] | BOLT (3/8-16X2.5-IN) | ||
| 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | ||
| 1A-5964 | [4] | BOLT (3/8-16X4.5-IN) | ||
| 2P-7636 | [2] | CONNECTOR (3/4-16 STR-THD) | ||
| 4P-0692 | [4] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 7C-2199 | [1] | CLAMP | ||
| 108-1434 | [1] | GROMMET | ||
| 4P-4460 | [2] | GASKET | ||
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-9890 | [2] | SEAL-O-RING | ||
| 6I-0804 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6I-0805 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 7N-7559 | [2] | GASKET | ||
| 7W-6333 | [4] | SPACER (10.5X20X10.7-MM THK) | ||
| 8L-2786 | [2] | SEAL-O-RING | ||
| 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 113-4642 | [1] | TUBE AS | ||
| 113-4646 | [2] | TUBE AS | ||
| 113-4648 | [2] | ELBOW | ||
| 130-2602 | [1] | TUBE AS | ||
| (ABOVE PARTS ARE PART OF GROUP 112-5010) | ||||
| 0S-1619 | [2] | BOLT (3/8-16X3-IN) | ||
| 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | ||
| 1N-4087 | [1] | ELBOW | ||
| 2A-4639 | [2] | BOLT (3/8-16X1.625-IN) | ||
| 4N-1320 | [1] | GASKET | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-1454 | [2] | SEAL-O-RING | ||
| 6V-5066 | [1] | SEAL-O-RING | ||
| 8N-1989 | [1] | TUBE | ||
| 8N-0386 | [1] | FLANGE | ||
| 141-9285 | [1] | ELBOW | ||
| 230-1072 | [1] | GASKET | ||
| (ABOVE PARTS ARE PART OF GROUP 114-3376) | ||||
| 0L-1351 | [8] | BOLT (3/8-16X0.875-IN) | ||
| 0L-2070 | [6] | BOLT (3/8-16X2.25-IN) | ||
| 0S-1588 | [3] | BOLT (3/8-16X1.25-IN) | ||
| 0S-1590 | [1] | BOLT (3/8-16X2-IN) | ||
| 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [13] | BOLT (3/8-16X1-IN) | ||
| 0T-0065 | [2] | BOLT (3/8-16X3.5-IN) | ||
| 1A-5822 | [2] | BOLT (1/2-13X2.75-IN) | ||
| 1C-2251 | [2] | BOLT (3/8-16X1.87-IN) | ||
| 1F-7958 | [8] | NUT-FULL (1/2-13-THD) | ||
| 1N-3872 | [1] | SUPPORT | ||
| 2M-0849 | [1] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 2V-4387 | [1] | SPACER (10.312X25.4X23.11-MM THK) | ||
| 2W-5225 | [2] | FLANGE | ||
| 3B-1915 | [6] | BOLT (3/8-16X1.375-IN) | ||
| 3J-7354 | [2] | SEAL-O-RING | ||
| 3P-6061 | [1] | GASKET | ||
| 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 4F-7387 | [1] | SEAL-O-RING | ||
| 4W-0530 | [6] | RING-RETAINING | ||
| 4W-0531 | [12] | RETAINER | ||
| 5B-0841 | [4] | BOLT (5/8-18X1.75-IN) | ||
| 5B-2638 | [2] | BOLT (3/8-16X5.25-IN) | ||
| 5B-4399 | [1] | SEAL-O-RING | ||
| 5P-2645 | [1] | ELBOW | ||
| 6H-1717 | [1] | BOLT (1/2-13X1.125-IN) | ||
| 6H-6698 | [1] | COVER | ||
| 6J-2680 | [6] | SEAL-O-RING | ||
| 7C-9597 | [4] | FLANGE | ||
| 7E-0015 | [2] | COVER | ||
| 7W-6492 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-1919 | [9] | SEAL-O-RING | ||
| 9L-9132 | [2] | WASHER (10.2X25.5X2.5-MM THK) | ||
| 9S-8752 | [11] | NUT-FULL (3/8-16-THD) | ||
| 9X-6458 | [14] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 9X-8873 | [8] | BOLT (1/2-13X2.25-IN) | ||
| 9Y-6893 | [2] | GASKET | ||
| 030-3978 | [1] | CONNECTOR | ||
| 110-6995 | [1] | PLATE | ||
| 110-9538 | [1] | TUBE | ||
| 111-5052 | [1] | BRACKET | ||
| 111-5056 | [1] | CONNECTOR | ||
| 114-2040 | [1] | ELBOW | ||
| 120-4344 | [1] | ADAPTER | ||
| 120-7425 | [1] | FLANGE | ||
| 121-2023 | [1] | TUBE | ||
| 122-1680 | [1] | BRACKET | ||
| 122-1681 | [1] | SUPPORT AS | ||
| 129-3083 | [1] | ELBOW | ||
| 143-0507 | [1] | TUBE | ||
| 187-4606 | [1] | HOSE AS | ||
| 196-5052 | [4] | CLIP (SLOT) | ||
| 196-5053 | [4] | CLIP (TAB) | ||
| 214-0731 | [1] | BRACKET | ||
| 216-6217 Y | [1] | HOUSING & REGULATOR GP (AFTERCOOLER) | ||
| (ABOVE PARTS ARE PART OF GROUP 141-9284) | ||||
| 0S-1591 | [9] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [1] | BOLT (3/8-16X1-IN) | ||
| 1L-5081 | [8] | SPACER (0.41X0.75X0.56-IN THK) | ||
| 3B-1915 | [8] | BOLT (3/8-16X1.375-IN) | ||
| 4S-4869 | [1] | TEE | ||
| 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 6V-5064 | [1] | SEAL-O-RING | ||
| 6V-6609 | [7] | SEAL-O-RING | ||
| 6V-8782 | [1] | TEE | ||
| 6V-8801 | NUT (3/8-16-THD) | |||
| 6V-9002 | [1] | ELBOW | ||
| 6V-9830 | [1] | CAP AS | ||
| 7N-7878 | [4] | PLATE-COVER | ||
| 8M-0505 | [1] | ADAPTER | ||
| 9G-8140 | [1] | SPACER (10.5X25X15-MM THK) | ||
| 9X-6458 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 9X-8606 | [2] | CLIP | ||
| 030-7943 | [1] | ELBOW | ||
| 107-0744 | [4] | BLOCK | ||
| 113-4647 | [1] | ADAPTER | ||
| 118-4728 | [2] | ELBOW | ||
| 252-5658 | [2] | HOSE AS | ||
| 341-9211 | [8] | GASKET | ||
| (ABOVE PARTS ARE PART OF GROUP 116-9870) | ||||
| 0S-1618 | [22] | BOLT (5/16-18X1-IN) | ||
| 1B-7182 | [24] | BOLT (5/16-18X1.25-IN) | ||
| 2W-3146 | [12] | FLANGE | ||
| 4P-3897 | [2] | MANIFOLD (INTERMEDIATE) | ||
| 6V-5064 | [2] | SEAL-O-RING | ||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 6V-5064 | [2] | SEAL-O-RING | ||
| 8N-7639 | [12] | ELBOW | ||
| 8T-6761 | [2] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | ||
| 9M-1974 | [22] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9S-4181 | [2] | PLUG (5/16-12-THD) | ||
| 9S-4181 | [2] | PLUG (5/16-12-THD) | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 111-8276 | [1] | MANIFOLD (REAR, LH) | ||
| 111-8277 | [1] | MANIFOLD (REAR, RH) | ||
| 111-9374 | [1] | HOUSING-REGULATOR | ||
| 122-8856 | [2] | GASKET | ||
| 133-8382 | [12] | BRACKET | ||
| 154-1616 | [1] | MANIFOLD (FRONT, LH) | ||
| 154-1617 | [1] | MANIFOLD (FRONT, RH) | ||
| 241-5928 | [12] | GASKET | ||
| 243-2288 | [4] | GASKET | ||
| (ABOVE PARTS ARE PART OF GROUP 140-2666) | ||||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61140049
20R-1076: KIT-ENGINE CONVERSION
20R-1076 KIT-ENGINE CONVERSION
S/N 66Z579-UP
3512B MUI TO TIER I EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO UPGRADE THE 2W-8868 MUI ENGINE ARRANGEMENT TO 232-2513 TIER I ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 357-1757 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3512B, 1200 RPM, 66Z00579-UP
FIELD INSTALLATION
S/N 66Z579-UP
3512B MUI TO TIER I EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO UPGRADE THE 2W-8868 MUI ENGINE ARRANGEMENT TO 232-2513 TIER I ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 357-1757 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3512B, 1200 RPM, 66Z00579-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 231-9999 Y | [1] | BOX GP-JUNCTION | ||
| (ABOVE PART SHIPPED LOOSE) | ||||
| 7E-2580 | [12] | CLAMP-INJECTOR | ||
| 7F-8698 | [12] | BOLT (7/16-14X3.5-IN) | ||
| 20R-1264 | [12] | INJECTOR GP-FUEL | ||
| (EACH INCLUDES) | ||||
| 245-4907 | [1] | SEAL-O-RING | ||
| 245-4908 | [1] | SEAL-O-RING | ||
| (ABOVE PARTS ARE PART OF GROUP 144-0726) | ||||
| 0R-7037 | [2] | TURBOCHARGER GP | ||
| (EACH INCLUDES) | ||||
| 113-5180 Y | [1] | TURBOCHARGER GP | ||
| 2N-2765 | [8] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | ||
| 6V-6753 | [16] | BOLT-HIGH TEMPERATURE (3/8-16X1.375-IN) | ||
| 188-0473 | [4] | FLANGE-HALF | ||
| 188-0472 | [4] | FLANGE-HALF | ||
| 207-1388 | [2] | BELLOWS AS | ||
| (ABOVE PARTS ARE PART OF GROUP 107-9524) | ||||
| 0S-1594 | [7] | BOLT (3/8-16X1-IN) | ||
| 1T-0765 | [1] | BOLT (3/8-16X1-IN) | ||
| 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5N-1939 | [1] | COVER | ||
| 5N-1940 | [1] | GASKET | ||
| 6V-3348 | [1] | SEAL-O-RING | ||
| 10R-1072 Y | [1] | PUMP GP-WATER | ||
| 235-3546 | [1] | SEAL-O-RING | ||
| (ABOVE PARTS ARE PART OF GROUP 9Y-8175) | ||||
| 0L-1143 | [4] | BOLT (3/8-16X2.5-IN) | ||
| 1B-9575 | [4] | BOLT (5/16-18X1.56-IN) | ||
| 1L-4031 | [1] | TEE-SERVICE | ||
| 2V-4387 | [4] | SPACER (10.312X25.4X23.11-MM THK) | ||
| 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 9X-6458 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 10R-8105 | [1] | CONTROL GP-ENGINE ELECTRONIC | ||
| 118-1656 | [1] | BUSHING-REDUCER | ||
| 155-0576 | [8] | MOUNT-ISOLATION | ||
| (ABOVE PARTS ARE PART OF GROUP 231-7068) | ||||
| 0L-2070 | [24] | BOLT (3/8-16X2.25-IN) | ||
| 0R-1620 | [12] | ROCKER ARM AS | ||
| (EACH INCLUDES) | ||||
| 8N-7197 | [1] | SOCKET-ARM | ||
| 230-2620 | [1] | BUSHING | ||
| 0R-1621 | [24] | ROCKER ARM AS | ||
| (EACH INCLUDES) | ||||
| 8N-7197 | [1] | SOCKET-ARM | ||
| 230-2620 | [1] | BUSHING | ||
| 0S-1615 | [12] | BOLT (1/4-20X0.75-IN) | ||
| 5P-0537 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 5P-7530 | [12] | SEAL-O-RING | ||
| 6J-2245 | [12] | SEAL-O-RING | ||
| 7E-6508 | [12] | CAP AS | ||
| 8D-7942 | [24] | BOLT-12 POINT HEAD (5/8-11X6.5-IN) | ||
| 9X-0352 | [12] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 10R-3139 | [12] | LIFTER AS | ||
| (EACH INCLUDES) | ||||
| 282-7944 | [1] | LIFTER AS-INJECTOR | ||
| 20R-1626 | [24] | LIFTER AS-VALVE | ||
| (EACH INCLUDES) | ||||
| 416-8319 | [1] | LIFTER AS-VALVE | ||
| 100-3877 | [12] | RETAINER-SPRING | ||
| 100-3878 | [12] | SPRING-INJECTOR | ||
| 100-3879 | [12] | PUSHROD-INJECTOR | ||
| 100-3880 | [24] | PUSHROD-VALVE | ||
| 132-6469 Y | [12] | HARNESS AS-WIRING | ||
| 154-6389 | [36] | BUTTON | ||
| 380-4843 | [12] | SCREW-ADJUSTING (5/8-18X2.375-IN) | ||
| 230-2633 | [12] | SHAFT AS (ROCKER ARM) | ||
| (EACH INCLUDES) | ||||
| 155-4094 | [1] | PIN-SPRING | ||
| 240-7032 | [12] | SEAL | ||
| 247-8341 Y | [12] | BASE GP-VALVE COVER | ||
| 317-1121 | [12] | NUT-JAM (5/8-18-THD) | ||
| (ABOVE PARTS ARE PART OF GROUP 224-9869) | ||||
| 1A-2029 | [7] | BOLT (3/8-16X1.125-IN) | ||
| 1D-4540 | [4] | BOLT (5/16-18X2.75-IN) | ||
| 2V-4387 | [4] | SPACER (10.312X25.4X23.11-MM THK) | ||
| 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 8N-9885 | [1] | GASKET-COVER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 10R-8105 | [1] | CONTROL GP-ENGINE ELECTRONIC | ||
| 111-0349 | [1] | BRACKET-MODULE | ||
| 155-0576 | [8] | MOUNT-ISOLATION | ||
| (ABOVE PARTS ARE PART OF GROUP 220-2677) | ||||
| 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | ||
| 3E-6916 | [72] | NUT-FULL (3/8-16-THD) | ||
| 4P-7680 | [16] | SPACER (10.5X22.5X15-MM THK) | ||
| 5P-1076 | [5] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 6H-1717 | [3] | BOLT (1/2-13X1.125-IN) | ||
| 7B-3235 | [1] | BOLT (1/2-13X1.375-IN) | ||
| 7L-6443 | [72] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 9L-7373 | [52] | BOLT-HIGH TEMPERATURE (3/8-16X2-IN) | ||
| 9L-9132 | [2] | WASHER (10.2X25.5X2.5-MM THK) | ||
| 100-3145 | [1] | MANIFOLD-EXHAUST (FRONT, RH) | ||
| 100-3146 | [4] | MANIFOLD-EXHAUST (REAR, RH) | ||
| 100-3147 | [1] | MANIFOLD-EXHAUST (FRONT, LH) | ||
| 100-3148 | [4] | MANIFOLD-EXHAUST (INTERMEDIATE, LH) | ||
| 110-8314 | [144] | WASHER (10.3X18.3X2.66-MM THK) | ||
| 116-9863 | [1] | BRACKET | ||
| 125-9754 | [1] | MANIFOLD-EXHAUST (REAR, LH) | ||
| 128-9508 | [1] | MANIFOLD-EXHAUST (REAR, RH) | ||
| 207-1364 | [10] | BELLOWS AS | ||
| 229-5332 | [12] | SEAL | ||
| 229-5333 | [20] | SEAL | ||
| 254-3261 | [1] | BRACKET AS (RH) | ||
| 254-3269 | [1] | BRACKET (LH) | ||
| (ABOVE PARTS ARE PART OF GROUP 129-5488) | ||||
| 1A-9579 | [4] | BOLT (5/16-18X1.5-IN) | ||
| 2B-2695 | [1] | BOLT (5/16-18X0.875-IN) | ||
| 4P-9226 | [1] | BRACKET | ||
| 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 031-4155 | [1] | LOCKNUT (5/16-18-THD) | ||
| 101-4199 | [1] | COVER AS | ||
| 262-6104 | [1] | CAP AS-ENGINE OIL FILLER | ||
| 272-0760 | [1] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF GROUP 112-6033) | ||||
| 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | ||
| 0S-1590 | [7] | BOLT (3/8-16X2-IN) | ||
| 0S-1594 | [2] | BOLT (3/8-16X1-IN) | ||
| 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | ||
| 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | ||
| 4P-0870 | [4] | MOUNT-FLEXIBLE | ||
| 5M-2894 | [23] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-8210 | [1] | SEAL-O-RING | ||
| 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 7N-4940 | [2] | BRACKET | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 8T-9368 | [2] | BOLT (1/4-20X2.25-IN) | ||
| 8T-9377 | [1] | BOLT (3/8-16X2.25-IN) | ||
| 9S-8752 | [10] | NUT-FULL (3/8-16-THD) | ||
| 133-6484 | [1] | COVER-BOX | ||
| 134-6275 | [2] | BRACKET | ||
| 253-6217 | [1] | BRACKET AS | ||
| 254-3402 | [1] | BRACKET | ||
| (ABOVE PARTS ARE PART OF GROUP 231-7874) | ||||
| 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | ||
| 0S-0509 | [6] | BOLT (3/8-16X0.75-IN) | ||
| 0S-1588 | [12] | BOLT (3/8-16X1.25-IN) | ||
| 0S-1590 | [4] | BOLT (3/8-16X2-IN) | ||
| 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [6] | BOLT (3/8-16X1-IN) | ||
| 3A-3692 | [2] | CLIP | ||
| 4P-7581 | [2] | CLIP | ||
| 4P-8134 | [24] | CLIP | ||
| 5M-2894 | [23] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-3426 | [1] | ELBOW | ||
| 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 6V-1581 | [1] | CLIP (SLOT) | ||
| 6V-1582 | [1] | CLIP (TAB) | ||
| 6V-5048 | [5] | SEAL-O-RING | ||
| 6V-9330 | [2] | ELBOW | ||
| 7G-5984 | [4] | CLIP (TAB) | ||
| 7G-5985 | [4] | CLIP (SLOT) | ||
| 7H-1911 | [2] | BOLT (1/2-13X9.375-IN) | ||
| 7K-1181 | [2] | STRAP-CABLE | ||
| 8T-2353 | [1] | ADAPTER | ||
| 9G-5127 | [1] | BREATHER AS (AIR) | ||
| 9G-8140 | [4] | SPACER (10.5X25X15-MM THK) | ||
| 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | ||
| 9X-0262 | [1] | ADAPTER | ||
| 9X-6458 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 9X-6772 | [33] | STRAP-CABLE | ||
| 001-9440 | [1] | CONNECTOR | ||
| 111-3684 | [1] | HOSE AS | ||
| 135-9941 | [1] | ADAPTER | ||
| 212-3423 Y | [2] | SENSOR GP-TEMPERATURE | ||
| 212-3425 Y | [2] | SENSOR GP-EXHAUST TEMPERATURE | ||
| 212-3426 Y | [2] | SENSOR GP-SPEED | ||
| 214-7568 | [4] | SEAL-O-RING | ||
| 245-0522 | [1] | BRACKET | ||
| 245-0523 | [2] | BRACKET | ||
| 278-6469 | [4] | GROMMET | ||
| 279-2064 Y | [1] | HARNESS AS-ENGINE (LH) | ||
| 295-4636 Y | [2] | SENSOR GP-SPEED | ||
| 304-5666 Y | [4] | SENSOR GP-PRESSURE | ||
| 348-9012 Y | [1] | HARNESS AS-ENGINE (RH) | ||
| (ABOVE PARTS ARE PART OF GROUP 232-0012) | ||||
| 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | ||
| (ABOVE PARTS ARE PART OF GROUP 112-4921) | ||||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 107-3759 | [2] | SEAL | ||
| 282-8217 | [1] | CORE AS-AFTERCOOLER | ||
| (ABOVE PARTS ARE PART OF GROUP 107-7196) | ||||
| 7X-7731 | [1] | PLUG-PIPE (3/4-14-THD) | ||
| 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 101-1198 | [14] | BEARING-CAMSHAFT | ||
| (ABOVE PARTS ARE PART OF GROUP 240-6651) | ||||
| 1A-9579 | [4] | BOLT (5/16-18X1.5-IN) | ||
| 4W-3027 | [1] | BREATHER AS (CRANKCASE) | ||
| 4W-3034 | [1] | CLAMP-HOSE | ||
| 5P-0597 | [1] | CLAMP-HOSE | ||
| 7N-7820 | [1] | BOOT | ||
| 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 033-6031 | [1] | SEAL-O-RING | ||
| 101-4199 | [3] | COVER AS | ||
| 141-7143 | [1] | HOSE-ELBOW | ||
| 180-3007 | [1] | CLAMP-HOSE | ||
| 272-0760 | [3] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF GROUP 247-4695) | ||||
| 144-0712 | [1] | CAMSHAFT AS | ||
| 4N-1650 | [1] | DOWEL | ||
| 144-0713 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| 144-0714 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| 144-0715 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| (ABOVE PARTS ARE PART OF GROUP 143-8727) | ||||
| 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | ||
| 2W-0752 | [1] | GASKET | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 117-0066 | [1] | BRACKET-MOUNTING | ||
| (ABOVE PARTS ARE PART OF GROUP 271-7761) | ||||
| 101-4197 | [8] | COVER | ||
| 272-0760 | [8] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF GROUP 101-0831) | ||||
| 101-1364 | [2] | GEAR AS-IDLER (69-TEETH) | ||
| (EACH INCLUDES) | ||||
| 125-9751 | [1] | BUSHING | ||
| 101-1366 | [1] | SHAFT-GEAR (CLUSTER) | ||
| 101-1367 | [2] | SHAFT-IDLER | ||
| 101-1369 | [2] | GEAR-CAMSHAFT DRIVE (70-TEETH) | ||
| 101-1370 | [1] | GEAR-CRANKSHAFT (92-TEETH) | ||
| 114-3372 | [1] | GEAR AS-CLUSTER (92/35-TEETH) | ||
| 101-1372 | [1] | BUSHING | ||
| (ABOVE PARTS ARE PART OF GROUP 124-8395) | ||||
| 20R-0695 Y | [12] | CYLINDER HEAD GP | ||
| (ABOVE PARTS ARE PART OF GROUP 299-3521) | ||||
| 222-9921 | [1] | HOUSING-FLYWHEEL | ||
| (ABOVE PARTS ARE PART OF GROUP 101-1269) | ||||
| 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | ||
| 2A-5220 | [6] | PLUG | ||
| (ABOVE PARTS ARE PART OF GROUP 4P-5426) | ||||
| 0S-0509 | [4] | BOLT (3/8-16X0.75-IN) | ||
| 4P-4642 | [1] | RETAINER-EYE | ||
| 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 193-3286 | [1] | RETAINER-EYE | ||
| (ABOVE PARTS ARE PART OF GROUP 7E-6872) | ||||
| 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | ||
| 0S-0509 | [30] | BOLT (3/8-16X0.75-IN) | ||
| 0S-1590 | [6] | BOLT (3/8-16X2-IN) | ||
| 0S-1594 | [16] | BOLT (3/8-16X1-IN) | ||
| 1T-0720 | [48] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | ||
| 2A-4639 | [24] | BOLT (3/8-16X1.625-IN) | ||
| 4S-5898 | [12] | SEAL-O-RING | ||
| 5L-3773 | [1] | GASKET-EXHAUST ELBOW | ||
| 6V-5103 | [4] | SEAL-O-RING | ||
| 7C-7909 | [10] | ELBOW (AIR INLET) | ||
| 7C-7910 | [2] | ELBOW (AIR INLET) | ||
| 7C-8199 | [12] | FLANGE | ||
| 7W-3145 | [4] | PLATE | ||
| 8M-9024 | [8] | WASHER-HARD (10.2X22.5X5-MM THK) | ||
| 8T-6762 | [8] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | ||
| 9F-2773 | [10] | BOLT (3/8-16X8.5-IN) | ||
| 9X-8874 | [2] | BOLT (1/2-13X3-IN) | ||
| 109-7411 | [2] | SEAL-O-RING | ||
| 111-2077 | [1] | COVER | ||
| 112-1567 | [2] | STRAP | ||
| 122-3374 | [2] | ELBOW (AIR INLET) | ||
| 122-3377 | [1] | PIPE-AIR | ||
| 122-3378 | [1] | PIPE-AIR | ||
| 124-0215 | [1] | ELBOW-TURBOCHARGER EXHAUST | ||
| 129-9528 | [1] | PLATE | ||
| 140-6458 | [1] | BRACKET | ||
| 283-9599 | [1] | MANIFOLD (AIR INLET) | ||
| (ABOVE PARTS ARE PART OF GROUP 144-2884) | ||||
| 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | ||
| 4S-5719 | [1] | SPACER (10.31X25X12.7-MM THK) | ||
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-4589 | [2] | SEAL-O-RING | ||
| 6V-5048 | [1] | SEAL-O-RING | ||
| 7E-6369 | [1] | BRACKET | ||
| 8C-3445 | [1] | CAP-DUST | ||
| 8C-3446 | [1] | VALVE-SAMPLING (ENGINE OIL) | ||
| 9S-4190 | [2] | PLUG-O-RING | ||
| 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | ||
| 365-4215 | [1] | ADAPTER | ||
| (ABOVE PARTS ARE PART OF GROUP 242-6277) | ||||
| 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | ||
| 2M-9780 | [6] | SEAL-O-RING | ||
| 3J-1907 | [25] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 030-7972 | [1] | ELBOW | ||
| 111-3388 | [1] | TUBE AS | ||
| 111-3389 | [1] | TUBE AS | ||
| 111-3389 | [1] | TUBE AS | ||
| 210-2535 | [1] | TUBE AS | ||
| (ABOVE PARTS ARE PART OF GROUP 234-8723) | ||||
| 0L-1143 | [2] | BOLT (3/8-16X2.5-IN) | ||
| 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | ||
| 1A-5964 | [4] | BOLT (3/8-16X4.5-IN) | ||
| 2P-7636 | [2] | CONNECTOR (3/4-16 STR-THD) | ||
| 4P-0692 | [4] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 7C-2199 | [1] | CLAMP | ||
| 108-1434 | [1] | GROMMET | ||
| 4P-4460 | [2] | GASKET | ||
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-9890 | [2] | SEAL-O-RING | ||
| 6I-0804 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6I-0805 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 7N-7559 | [2] | GASKET | ||
| 7W-6333 | [4] | SPACER (10.5X20X10.7-MM THK) | ||
| 8L-2786 | [2] | SEAL-O-RING | ||
| 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 113-4642 | [1] | TUBE AS | ||
| 113-4646 | [2] | TUBE AS | ||
| 113-4648 | [2] | ELBOW | ||
| 130-2602 | [1] | TUBE AS | ||
| (ABOVE PARTS ARE PART OF GROUP 112-5010) | ||||
| 0S-1619 | [2] | BOLT (3/8-16X3-IN) | ||
| 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | ||
| 1N-4087 | [1] | ELBOW | ||
| 2A-4639 | [2] | BOLT (3/8-16X1.625-IN) | ||
| 4N-1320 | [1] | GASKET | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-1454 | [2] | SEAL-O-RING | ||
| 6V-5066 | [1] | SEAL-O-RING | ||
| 8N-0386 | [1] | FLANGE | ||
| 8N-1989 | [1] | TUBE | ||
| 141-9285 | [1] | ELBOW | ||
| 230-1072 | [1] | GASKET | ||
| (ABOVE PARTS ARE PART OF GROUP 114-3376) | ||||
| 10R-4343 | [12] | PISTON & ROD GP | ||
| (EACH INCLUDES) | ||||
| 0R-9200 | [1] | ROD AS-CONNECTING | ||
| 7N-2043 | [1] | DOWEL | ||
| 7N-2405 | [4] | BOLT-CONNECTING ROD | ||
| 118-1655 | [1] | BUSHING (CONNECTING ROD) | ||
| 144-5695 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 211-7826 | [1] | LINER-CYLINDER BLOCK | ||
| 214-6066 | [1] | RING-PISTON (TOP) | ||
| 223-6361 | [1] | RING-PISTON (OIL) | ||
| 253-1238 | [2] | RETAINER-PIN | ||
| 353-5995 | [1] | KIT-SEAL (CYLINDER) | ||
| 7N-2046 | [3] | SEAL-O-RING | ||
| 8N-4707 | [1] | BAND-FILLER | ||
| 352-6061 | [1] | SEAL-LINER | ||
| (ABOVE PARTS ARE PART OF GROUP 281-6139) | ||||
| 0L-1351 | [8] | BOLT (3/8-16X0.875-IN) | ||
| 0L-2070 | [6] | BOLT (3/8-16X2.25-IN) | ||
| 0S-1588 | [3] | BOLT (3/8-16X1.25-IN) | ||
| 0S-1594 | [13] | BOLT (3/8-16X1-IN) | ||
| 0S-1590 | [1] | BOLT (3/8-16X2-IN) | ||
| 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | ||
| 0T-0065 | [2] | BOLT (3/8-16X3.5-IN) | ||
| 1A-5822 | [2] | BOLT (1/2-13X2.75-IN) | ||
| 1C-2251 | [2] | BOLT (3/8-16X1.87-IN) | ||
| 1F-7958 | [8] | NUT-FULL (1/2-13-THD) | ||
| 1N-3872 | [1] | SUPPORT | ||
| 2M-0849 | [1] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 2V-4387 | [1] | SPACER (10.312X25.4X23.11-MM THK) | ||
| 2W-5225 | [2] | FLANGE | ||
| 3B-1915 | [6] | BOLT (3/8-16X1.375-IN) | ||
| 3J-7354 | [2] | SEAL-O-RING | ||
| 3P-6061 | [1] | GASKET | ||
| 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 4F-7387 | [1] | SEAL-O-RING | ||
| 4W-0530 | [6] | RING-RETAINING | ||
| 4W-0531 | [12] | RETAINER | ||
| 5B-0841 | [4] | BOLT (5/8-18X1.75-IN) | ||
| 5B-2638 | [2] | BOLT (3/8-16X5.25-IN) | ||
| 5B-4399 | [1] | SEAL-O-RING | ||
| 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-2645 | [1] | ELBOW | ||
| 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 6H-1717 | [1] | BOLT (1/2-13X1.125-IN) | ||
| 6H-6698 | [1] | COVER | ||
| 6J-2680 | [6] | SEAL-O-RING | ||
| 7C-9597 | [4] | FLANGE | ||
| 7E-0015 | [2] | COVER | ||
| 7W-6492 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-1919 | [6] | SEAL-O-RING | ||
| 9L-9132 | [2] | WASHER (10.2X25.5X2.5-MM THK) | ||
| 9S-8752 | [11] | NUT-FULL (3/8-16-THD) | ||
| 9X-6458 | [14] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 9X-8873 | [8] | BOLT (1/2-13X2.25-IN) | ||
| 9Y-6893 | [2] | GASKET | ||
| 030-3978 | [1] | CONNECTOR | ||
| 110-6995 | [1] | PLATE | ||
| 110-9538 | [1] | TUBE | ||
| 111-5052 | [1] | BRACKET | ||
| 111-5056 | [1] | CONNECTOR | ||
| 114-2040 | [1] | ELBOW | ||
| 120-4344 | [1] | ADAPTER | ||
| 120-7425 | [1] | FLANGE | ||
| 121-2023 | [1] | TUBE | ||
| 122-1680 | [1] | BRACKET | ||
| 122-1681 | [1] | SUPPORT AS | ||
| 129-3083 | [1] | ELBOW | ||
| 143-0507 | [1] | TUBE | ||
| 143-0508 | [1] | BRACKET | ||
| 187-4606 | [1] | HOSE AS | ||
| 196-5052 | [4] | CLIP (SLOT) | ||
| 196-5053 | [4] | CLIP (TAB) | ||
| 214-0731 | [1] | BRACKET | ||
| 216-6217 Y | [1] | HOUSING & REGULATOR GP (AFTERCOOLER) | ||
| (ABOVE PARTS ARE PART OF GROUP 141-9284) | ||||
| 0S-1591 | [9] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [1] | BOLT (3/8-16X1-IN) | ||
| 1L-5081 | [8] | SPACER (0.41X0.75X0.56-IN THK) | ||
| 3B-1915 | [8] | BOLT (3/8-16X1.375-IN) | ||
| 4S-4869 | [1] | TEE | ||
| 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 6V-5064 | [1] | SEAL-O-RING | ||
| 6V-6609 | [7] | SEAL-O-RING | ||
| 6V-8782 | [1] | TEE | ||
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 6V-9002 | [1] | ELBOW | ||
| 6V-9830 | [1] | CAP AS | ||
| 7N-7878 | [4] | PLATE-COVER | ||
| 8M-0505 | [1] | ADAPTER | ||
| 7N-7878 | [4] | PLATE-COVER | ||
| 9G-8140 | [1] | SPACER (10.5X25X15-MM THK) | ||
| 9X-6458 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 9X-8606 | [2] | CLIP | ||
| 030-7943 | [1] | ELBOW | ||
| 107-0744 | [4] | BLOCK | ||
| 113-4647 | [1] | ADAPTER | ||
| 118-4728 | [2] | ELBOW | ||
| 146-3342 | [2] | COUPLING-PERMANENT | ||
| 146-3369 | [1] | COUPLING AS-PERMANENT | ||
| 180-8424 | [3] | SEAL-O-RING | ||
| 252-5658 | [2] | HOSE AS | ||
| 341-9211 | [8] | GASKET | ||
| (ABOVE PARTS ARE PART OF GROUP 116-9870) | ||||
| 0S-1618 | [22] | BOLT (5/16-18X1-IN) | ||
| 1B-7182 | [24] | BOLT (5/16-18X1.25-IN) | ||
| 2W-3146 | [12] | FLANGE | ||
| 4P-3897 | [2] | MANIFOLD (INTERMEDIATE) | ||
| 6V-5064 | [2] | SEAL-O-RING | ||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 6V-5064 | [2] | SEAL-O-RING | ||
| 8N-7639 | [12] | ELBOW | ||
| 8T-6761 | [2] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | ||
| 9M-1974 | [22] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9S-4181 | [2] | PLUG (5/16-12-THD) | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 111-8277 | [1] | MANIFOLD (REAR, RH) | ||
| 111-8276 | [1] | MANIFOLD (REAR, LH) | ||
| 111-9374 | [1] | HOUSING-REGULATOR | ||
| 122-8856 | [2] | GASKET | ||
| 133-8382 | [12] | BRACKET | ||
| 154-1616 | [1] | MANIFOLD (FRONT, LH) | ||
| 154-1617 | [1] | MANIFOLD (FRONT, RH) | ||
| 241-5928 | [12] | GASKET | ||
| 243-2288 | [4] | GASKET | ||
| (ABOVE PARTS ARE PART OF GROUP 140-2666) | ||||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
FLYWHEEL GP
Engine News
Some 3512 Engines Used In Generator Set Applications No Longer Use Flywheel Balance Weights
1984/04/11
1984/04/11
Service Letter-NACD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Specifications
Service Letter-China
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Service Letter-APD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Testing and Adjusting
Disassembly and Assembly
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
1982/10/11
Some 3512 Engines Used In Generator Set Applications No Longer Use Flywheel Balance Weights{1156}
1984/03/12
1984/03/12
Caterpillar Parts SIS Catalog 3512 :
Truck sale:
230,416
230,416
238,453
178,974
178,974