AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

113-5180 TURBOCHARGER GP S/N 66Z579-UP PART OF 20R-1075, 20R-1076, 350-2154, 350-2155 KIT-ENGINE CONVERSION, 107-9524 TURBOCHARGER GP 3512


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUEL
LINES GP-FUEL INJECTION

MARINE ENGINE 3512 MARINE ENGINE 50Y
 3512 Engine Emissions Upgrade Group Retrofit to Tier I Equivalent Level 50Y01305-UP SEBP6114 3512 50Y   (1980)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER AIR
173-2947 LINES GP-TURBOCHARGER AIR
TURBOCHARGER GP
107-9524 TURBOCHARGER GP
TURBOCHARGER GP
113-5180 TURBOCHARGER GP
TURBOCHARGER GP
173-7676 TURBOCHARGER GP
TURBOCHARGER GP
173-7677 TURBOCHARGER GP
TURBOCHARGER GP
173-7677 TURBOCHARGER GP
 

#SEBP61140110
 

113-5180: TURBOCHARGER GP

113-5180 TURBOCHARGER GP
S/N 66Z579-UP
PART OF 20R-1075, 20R-1076, 350-2154, 350-2155 KIT-ENGINE CONVERSION, 107-9524 TURBOCHARGER GP
i00476189 SEBP6114
1135180 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-5826 [1] COVER-COMPRESSOR  
2. 7W-2297 [1] CLAMP AS (COMPRESSOR)  
3. 7N-7672 [2] PLATE  
  7N-7673 [2] PLATE  
4. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
  5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 9N-2038 [1] CLAMP AS-TURBINE  
6. 128-7820 [1] HOUSING-TURBINE  
7. 192-3726 [1] CARTRIDGE GP-TURBOCHARGER  
  4P-3818 M [3] BOLT (M4X0.7X10-MM)  
  206-8868 [1] SEAL-RING  
  211-2259 [2] RING-PISTON  
  211-2260 [1] COLLAR-THRUST  
  211-2261 [1] BEARING-THRUST  
  211-2264 [1] RING-PISTON  
  156-6964 [4] BOLT  
  239-5894 [2] BEARING-JOURNAL  
  461-3728 [3] RING-RETAINING  
  461-3792 [3] WASHER  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP61140111
 

173-7676: TURBOCHARGER GP

173-7676 TURBOCHARGER GP
S/N 50Y1305-UP
i02854141 SEBP6114
1737676 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-2765 [8] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
2. 121-5736 [2] GASKET (TURBOCHARGER)  
3. 188-0471 [4] FLANGE-HALF  
4. 329-3716 [4] FLANGE-HALF  
5. 289-0379 CY [2] TURBOCHARGER GP  
6. 453-7800 [4] GASKET-EXHAUST  
7. 207-1390 [2] BELLOWS AS  
8. 2N-2766 [8] LOCKNUT (3/8-16-THD)(HIGH TEMPERATURE)  
9. 5M-2894 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6V-1943 [12] BOLT-HIGH TEMPERATURE (3/8-16X1.125-IN)  
11. 6V-6753 [8] BOLT-HIGH TEMPERATURE (3/8-16X1.375-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61140112
 

173-7677: TURBOCHARGER GP

173-7677 TURBOCHARGER GP
S/N 50Y1305-UP
Type 1
i02712390 SEBP6114
1737677 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-5736 [2] GASKET (TURBOCHARGER)  
2. 188-0471 [4] FLANGE-HALF  
3. 329-3716 [4] FLANGE-HALF  
4. 207-1382 [4] GASKET-EXHAUST  
5. 207-1390 [2] BELLOWS AS  
6. 299-4611 CY [2] TURBOCHARGER GP  
7. 2N-2765 [8] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
8. 2N-2766 [8] LOCKNUT (3/8-16-THD)(HIGH TEMPERATURE)  
9. 5M-2894 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6V-1943 [12] BOLT-HIGH TEMPERATURE (3/8-16X1.125-IN)  
11. 6V-6753 [8] BOLT-HIGH TEMPERATURE (3/8X16X1.375-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61140113
 

173-7677: TURBOCHARGER GP

173-7677 TURBOCHARGER GP
S/N 50Y1305-UP
Type 2
i05743112 SEBP6114
1737677 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-5736 [2] GASKET (TURBOCHARGER)  
2. 188-0471 [4] FLANGE-HALF  
3. 329-3716 [4] FLANGE-HALF  
4. 453-7800 [4] GASKET-EXHAUST  
5. 207-1390 [2] BELLOWS AS  
6. 394-0378 CY [2] TURBOCHARGER GP  
7. 2N-2765 [8] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
8. 2N-2766 [8] LOCKNUT (3/8-16-THD)(HIGH TEMPERATURE)  
9. 5M-2894 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6V-1943 [12] BOLT-HIGH TEMPERATURE (3/8-16X1.125-IN)  
11. 6V-6753 [8] BOLT-HIGH TEMPERATURE (3/8-16X1.375-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61140114
 

289-0379: TURBOCHARGER GP

289-0379 TURBOCHARGER GP
S/N 50Y1305-UP
PART OF 20R-1077 KIT-ENGINE CONVERSION, 173-7676 TURBOCHARGER GP
i02781813 SEBP6114
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  185-5863 [1] CARTRIDGE GP-TURBOCHARGER  
   
  125-5375 [8] BOLT (3/8-16X1.75-IN)  
  188-8617 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.75-IN)  
  188-8618 [2] CLAMP (TURBINE)  
  180-5438 [1] COVER-COMPRESSOR  
  289-4079 [1] GASKET (TURBINE)  
  294-7492 [1] HOUSING (TURBINE)  
  125-5376 [4] PLATE-CLAMP (COMPRESSOR)  
  287-7207 [1] SEAL-O-RING  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP61140115
 

299-4611: TURBOCHARGER GP

299-4611 TURBOCHARGER GP
S/N 50Y1305-UP
PART OF 20R-1078, 20R-1079, 20R-1080 KIT-ENGINE CONVERSION, 173-7677 TURBOCHARGER GP
i02712395 SEBP6114
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  125-5375 [8] BOLT (3/8-16X1.75-IN)  
  188-8617 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.75-IN)  
  180-5445 [1] CARTRIDGE GP-TURBOCHARGER  
  188-8618 [2] CLAMP (TURBINE)  
  183-2821 [1] COVER-COMPRESSOR  
  289-4079 [1] GASKET (TURBINE)  
  294-7492 [1] HOUSING (TURBINE)  
  125-5376 [4] PLATE-CLAMP (COMPRESSOR)  
  287-7207 [1] SEAL-O-RING  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP61140116
 

394-0378: TURBOCHARGER GP

394-0378 TURBOCHARGER GP
S/N 50Y1305-UP
PART OF 350-2157 KIT-ENGINE CONVERSION, 350-2158, 350-2159 KIT-ENGINE PARTS, 173-7677 TURBOCHARGER GP
i05433728 SEBP6114
3940378 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 369-3458 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.87-IN)  
2. 125-5376 [4] PLATE-CLAMP (COMPRESSOR)  
3. 125-5375 [8] BOLT (3/8-16X1.75-IN)  
4. 180-5445 [1] CARTRIDGE GP-TURBOCHARGER  
5. 183-2821 [1] COVER-COMPRESSOR  
6. 287-7207 [1] SEAL-O-RING  
7. 289-4079 [1] GASKET (TURBINE)  
8. 369-3229 [2] CLAMP (TURBINE)  
9. 394-0383 [1] HOUSING (TURBINE)  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP61140117
 

394-0381: TURBOCHARGER GP

394-0381 TURBOCHARGER GP
S/N 50Y1305-UP
PART OF 350-2156 KIT-ENGINE PARTS
i05056791 SEBP6114
3940381 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 369-3458 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.87-IN)  
2. 125-5376 [4] PLATE-CLAMP (COMPRESSOR)  
3. 125-5375 [8] BOLT (3/8-16X1.75-IN)  
4. 180-5438 [1] COVER-COMPRESSOR  
5. 185-5863 [1] CARTRIDGE GP-TURBOCHARGER  
6. 287-7207 [1] SEAL-O-RING  
7. 289-4079 [1] GASKET (TURBINE)  
8. 369-3229 [2] CLAMP (TURBINE)  
9. 394-0383 [1] HOUSING  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP61140118
 

7W-9741: FILTER GP-FUEL

7W-9741 FILTER GP-FUEL -RH
i01662792 SEBP6114
7W9741 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6766 [1] PLUG-PIPE  
2. 267-9689 [1] COVER-FILTER HOUSING  
3. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 9S-4190 [1] PLUG-O-RING  
6. 7F-0192 C [2] BOLT (3/8-16X2-IN)  
7. 9S-4182 [5] PLUG  
8. 6V-5048 [5] SEAL-O-RING  
9. 5D-5957 [2] SEAL-O-RING  
10. 278-1776 [1] HOUSING AS-FUEL FILTER  
11. 1B-7182 C [1] BOLT (5/16-18X1.25-IN)  
12. 9S-4185 [1] PLUG  
13. 1R-0756 [5] FILTER ELEMENT-FUEL (ADVANCED EFFICIENCY)  
14. 2W-9300 [1] COVER-FILTER HOUSING  
15. 1N-2895 [1] SPRING  
16. 6I-3754 [1] RETAINER-FILTER  
17. 6V-4589 [1] SEAL-O-RING  
18. 2S-5100 [1] VALVE-MANUAL  
19. 6N-4414 [1] COVER-FILTER BASE  
20. 9Y-8389 [1] GASKET (PRIMING PUMP/COVER)  
21. 6V-5049 [1] SEAL-O-RING  
22. 9S-4191 [1] PLUG  
23. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
24. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 8L-2786 [1] SEAL-O-RING  
26. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
27. 3B-1915 C [8] BOLT (3/8-16X1.375-IN)  
28. 8M-9024 [8] WASHER-HARD (10.2X22.5X5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP61140119
 

386-1752: INJECTOR GP-FUEL

386-1752 INJECTOR GP-FUEL
S/N 66Z579-UP
PART OF 144-0726 PUMP GP-FUEL INJECTION
i04744559 SEBP6114
3861752 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 245-4908 [1] SEAL-O-RING  
2. 245-4907 [1] SEAL-O-RING  
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage
1984/01/18
O-Ring Seal Not Needed On Turbochargers
1985/10/01
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers
1988/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups
1991/04/01
"Off-Size" Bearing Kits Available
1991/10/01
New Exhaust Bellows Used In Turbocharger Group
1992/06/01
New Bellows Assemblies Used In Turbocharger Groups
1992/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/01
Water Cooled Turbine Housings May Require Larger Core Plugs{1065,1050}
1994/11/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
Slip In Coupling Used Instead Of Bellows Assembly In Turbocharger Group To Improve Serviceability{1061,1065}
1996/02/16
New Adapters In Turbocharger Groups Provide Improved Sealing Between The Turbocharger And Exhaust Elbow{1061,1065}
1997/03/01
New Support Assembly (Turbocharger) Added {1059}
1998/01/20
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Hole in the Turbine Housing of the Turbocharger {1052}
2006/06/26
Packaging the Turbocharger {1052}
2007/02/26
A New Torque Specification Is Used for the V-Band Clamp of Turbochargers on Certain 3500 and C175-16 Engines {1052, 7553}
2012/02/01
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbocharger
3500 Marine Engines
Turbocharger
3500 Marine Engines
Systems Operation
Turbocharger
3500 Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbochargers (TW81, TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbocharger (W153)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW81)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (W153)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage{1052,1061}
1983/12/12
Water Cooled Exhaust Elbow Groups Available{1052,1061}
1985/06/03
O-Ring Seal Not Needed On Turbochargers{1052}
1985/10/07
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers{1059,1070}
1988/09/19
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups{1052,1053,1056,7553}
1991/04/08
New Exhaust Bellows Used In Turbocharger Group{1052}
1992/06/15
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3512 :

TURBOCHARGER GP
107-9524 TURBOCHARGER GP
SHIELD GP-EXHAUST
321-3848 SHIELD GP-EXHAUST
SHIELD GP-EXHAUST
317-1701 SHIELD GP-EXHAUST
SHIELD GP-EXHAUST
317-1699 SHIELD GP-EXHAUST
SHIELD GP-EXHAUST
240-8478 SHIELD GP-EXHAUST
SHIELD GP-EXHAUST
200-2000 SHIELD GP-EXHAUST
SHIELD GP-EXHAUST
200-1999 SHIELD GP-EXHAUST
MANIFOLD GP-EXHAUST
161-2502 MANIFOLD GP-EXHAUST
TURBOCHARGER GP
173-7676 TURBOCHARGER GP
TURBOCHARGER GP
173-7677 TURBOCHARGER GP
TURBOCHARGER GP
173-7677 TURBOCHARGER GP
289-0379 TURBOCHARGER GP
299-4611 TURBOCHARGER GP
TURBOCHARGER GP
394-0378 TURBOCHARGER GP
TURBOCHARGER GP
394-0381 TURBOCHARGER GP
FILTER GP-FUEL
7W-9741 FILTER GP-FUEL

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.