AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

159-8829 TURBOCHARGER GP S/N 29Z1466-UP 3516 MARINE ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUEL
LINES GP-FUEL INJECTION
LINES GP-FUEL
PUMP GP-FUEL INJECTION

MARINE ENGINE 3516 MARINE ENGINE 29Z
 3516 Engine Emissions Upgrade Group Retrofit To Tier I Equivalent Level 29Z01095-UP SEBP6115 3516 29Z   (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
153-4060 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
153-4060 LINES GP-TURBOCHARGER OIL
165-4194 CARTRIDGE GP-TURBOCHARGER
LINES GP-TURBOCHARGER AIR
174-7083 LINES GP-TURBOCHARGER AIR
TURBOCHARGER GP
159-8829 TURBOCHARGER GP
TURBOCHARGER GP
159-8829 TURBOCHARGER GP
196-9548 TURBOCHARGER GP
TURBOCHARGER GP
354-5841 TURBOCHARGER GP
 

#SEBP61150080
 

159-8829: TURBOCHARGER GP

159-8829 TURBOCHARGER GP
S/N 29Z1466-UP
i04841738 SEBP6115
1598829 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 152-4993 [2] ADAPTER  
2. 354-5841 Y [2] TURBOCHARGER GP  
3. 3E-6794 [2] SEAL-O-RING  
4. 5P-7970 M [24] NUT (M8X1.25-THD)  
5. 9M-1974 [24] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61150081
 

196-9548: TURBOCHARGER GP

196-9548 TURBOCHARGER GP
PART OF 159-8829 TURBOCHARGER GP
i01430153 SEBP6115
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  165-4194 Y [1] CARTRIDGE GP-TURBOCHARGER  
  165-4201 [1] CLAMP AS (V-BAND)(TURBINE)  
  165-6673 [2] CLAMP AS (V-BAND)(COMPRESSOR)  
  165-4195 [1] DIFFUSER  
  165-4197 [1] FLANGE-EXHAUST  
  201-4248 [1] HOUSING AS-TURBINE  
  165-6672 [1] HOUSING-COMPRESSOR  
  165-4198 [1] INSERT (COMPRESSOR HOUSING)  
  5Y-1013 M [12] NUT (M8X1.25-THD)  
  371-6396 [1] RING-NOZZLE  
  165-6670 [1] SHIELD AS  
  189-5115 [12] STUD (HIGH TEMPERATURE)(M8X1.5X50)  
   
    AVAILABLE REPAIR KIT(S):
  165-6674 KIT-TURBOCHARGER SEAL  
    (INCLUDES SEAL-O-RINGS, GASKET & BOLT)
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61150082
 

354-5841: TURBOCHARGER GP

354-5841 TURBOCHARGER GP
PART OF 20R-1081, 350-2162 KIT-ENGINE CONVERSION, 159-8829 TURBOCHARGER GP
i04785591 SEBP6115
3545841 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Y-1013 M [24] NUT (M8X1.25-THD)  
2. 354-5849 [1] HOUSING AS-COMPRESSOR  
  252-5059 [2] PLUG  
  252-5062 [2] SEAL  
3. 354-5851 [1] HOUSING AS-TURBINE (TURBINE)  
  382-9185 [1] PLUG  
4. 165-6673 [1] CLAMP AS (V-BAND)  
5. 354-5845 J [1] CARTRIDGE GP-TURBOCHARGER  
  252-5060 [2] PLUG  
  254-6769 [2] SEAL  
6. 165-4195 [1] DIFFUSER  
7. 371-6395 [1] RING-NOZZLE  
8. 165-4197 [1] FLANGE-EXHAUST  
9. 165-6670 [1] SHIELD AS  
10. 189-5115 [12] STUD (HIGH TEMPERATURE)  
11. 165-4198 [1] INSERT  
12. 422-9016 [1] RING  
   
    AVAILABLE REPAIR KIT(S):
  292-3497 [1] KIT-TURBOCHARGER (SHIELD)  
    (INCLUDES BOLTS & WASHERS)
  355-6045 [1] KIT-SEAL  
    (INCLUDES SEALS, BOLT, GASKET, & SCREWS)
  357-6626 [3] KIT-TURBOCHARGER  
    (EACH INCLUDES BOLTS & PLATE)
  357-6627 [4] KIT-TURBOCHARGER  
    (EACHINCLUDES STUDS, WASHERS, NUTS, & PLATE)
  185-0098 J [1] KIT-BEARING SEAL  
    (INCLUDES BOLTS, SEAL RINGS, & SEAL-O-RING)
  185-0099 J [1] KIT-BEARING  
    (INCLUDES BOLTS, SEAL RINGS, & SEAL-O-RING)
  J   (KITS MARKED J SERVICE PART MARKED J)
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP61150083
 

7W-9741: FILTER GP-FUEL

7W-9741 FILTER GP-FUEL -RH
i01662792 SEBP6115
7W9741 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6766 [1] PLUG-PIPE  
2. 267-9689 [1] COVER-FILTER HOUSING  
3. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
6. 7F-0192 C [2] BOLT (3/8-16X2-IN)  
7. 9S-4182 [5] PLUG (7/16-20-THD)  
8. 6V-5048 [5] SEAL-O-RING  
9. 5D-5957 [2] SEAL-O-RING  
10. 278-1776 [1] HOUSING AS-FUEL FILTER  
11. 1B-7182 C [1] BOLT (5/16-18X1.25-IN)  
12. 9S-4185 [1] PLUG (3/4-16-THD)  
13. 1R-0756 [5] FILTER ELEMENT-FUEL (ADVANCED EFFICIENCY)  
14. 2W-9300 [1] COVER-FILTER HOUSING  
15. 1N-2895 [1] SPRING  
16. 6I-3754 [1] RETAINER-FILTER  
17. 6V-4589 [1] SEAL-O-RING  
18. 2S-5100 [1] VALVE-MANUAL  
19. 6N-4414 [1] COVER-FILTER BASE  
20. 9Y-8389 [1] GASKET (PRIMING PUMP/COVER)  
21. 6V-5049 [1] SEAL-O-RING  
22. 9S-4191 [1] PLUG (9/16-18-THD)  
23. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
24. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 8L-2786 [1] SEAL-O-RING  
26. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
27. 3B-1915 C [8] BOLT (3/8-16X1.375-IN)  
28. 8M-9024 [8] WASHER-HARD (10.2X22.5X5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP61150084
 

392-0214: INJECTOR GP-FUEL

392-0214 INJECTOR GP-FUEL
PART OF 350-2162 KIT-ENGINE CONVERSION, 100-8774 PUMP GP-FUEL INJECTION
i05809004 SEBP6115
3920214 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 245-4908 [1] SEAL-O-RING  
2. 245-4907 [1] SEAL-O-RING  
 

#SEBP61150085
 

234-8724: LINES GP-FUEL INJECTION

234-8724 LINES GP-FUEL INJECTION
Type 1
i01933265 SEBP6115
2348724 LINES GP-FUEL INJECTION Parts scheme 2348724 LINES GP-FUEL INJECTION Parts scheme 2348724 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0692 [16] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
2. 4P-0693 [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
3. 6B-6205 [2] SPACER (0.438X0.875X1.281-IN THK)  
4. 6V-4363 [1] ELBOW (90-DEG)  
5. 7C-7677 [16] TUBE AS  
6. 7C-7678 [16] TUBE AS  
7. 7C-7682 [1] ADAPTER-FUEL MANIFOLD (RH)  
8. 7C-7683 [1] ADAPTER-FUEL MANIFOLD (LH)  
9. 7E-3921 [1] VALVE-CHECK  
10. 7W-2122 [32] CONNECTOR-PORT  
11. 8N-6210 [1] BRACKET-LINE SUPPORT  
12. 8N-6211 [1] PLATE-LINE SUPPORT  
13. 8N-6326 [1] TUBE AS  
14. 8N-6327 [1] TUBE AS  
15. 9N-4053 [1] SPRING  
16. 030-7977 [1] ELBOW  
17. 111-3388 [1] TUBE AS  
18. 111-3389 [1] TUBE AS  
19. 114-5477 [1] PLUNGER-VALVE  
20. 156-9755 Y [1] MANIFOLD GP-FUEL (RH)  
21. 156-9756 Y [1] MANIFOLD GP-FUEL (LH)  
22. 205-8421 [1] TUBE AS  
23. 250-1498 [3] ELBOW AS  
    (EACH INCLUDES)
  6V-4589 [1] SEAL-O-RING  
  030-7949 [1] ELBOW (90-DEG)  
24. 030-7972 [1] ELBOW  
25. 0L-2070 [5] BOLT (3/8-16X2.25-IN)  
26. 0S-1590 [1] BOLT (3/8-16X2-IN)  
27. 0S-1594 [1] BOLT (3/8-16X1-IN)  
28. 0T-0065 [3] BOLT (3/8-16X3.5-IN)  
29. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
30. 1F-4111 [1] BOLT (5/16-18X3.5-IN)  
31. 2M-9780 [6] SEAL-O-RING  
32. 2P-1296 [1] TEE  
33. 2P-7636 [1] CONNECTOR (3/4-16 STR-THD)  
34. 3J-1907 [32] SEAL-O-RING  
35. 3J-7354 [1] SEAL-O-RING  
36. 3K-0360 [1] SEAL-O-RING  
37. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
38. 5P-4900 [1] ELBOW-FLARED  
39. 5S-0003 [1] NUT (5/16-18-THD)  
40. 6V-5049 [1] SEAL-O-RING  
41. 7K-3377 [2] PIPE  
42. 7N-6806 [4] SEAL-RECTANGULAR  
43. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 9M-4584 [2] CONNECTOR  
45. 9S-4182 [1] PLUG (7/16-20-THD)  
46. 9S-4191 [1] PLUG (9/16-18-THD)  
49. 0L-1590 B [2] BOLT (1/4-28X1.125-IN)  
50. 0T-0065 B [1] BOLT (3/8-16X3.5-IN)  
51. 5M-2894 B [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP61150086
 

234-8724: LINES GP-FUEL INJECTION

234-8724 LINES GP-FUEL INJECTION
Type 2
i05270300 SEBP6115
2348724 LINES GP-FUEL INJECTION Parts scheme 2348724 LINES GP-FUEL INJECTION Parts scheme 2348724 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0692 [16] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
2. 4P-0693 [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
3. 6B-6205 [2] SPACER (0.438X0.875X1.281-IN THK)  
4. 6V-4363 [1] ELBOW (90-DEG)  
5. 7C-7677 [16] TUBE AS  
6. 7C-7678 [16] TUBE AS  
7. 7C-7682 [1] ADAPTER-FUEL MANIFOLD (RH)  
8. 7C-7683 [1] ADAPTER-FUEL MANIFOLD (LH)  
9. 7E-3921 [1] VALVE-CHECK  
10. 7W-2122 [32] CONNECTOR-PORT  
11. 8N-6210 [1] BRACKET-LINE SUPPORT  
12. 8N-6211 [1] PLATE-LINE SUPPORT  
13. 8N-6326 [1] TUBE AS  
14. 8N-6327 [1] TUBE AS  
15. 9N-4053 [1] SPRING  
16. 030-7977 [1] ELBOW  
17. 111-3388 [1] TUBE AS  
18. 111-3389 [1] TUBE AS  
19. 114-5477 [1] PLUNGER-VALVE  
20. 156-9755 Y [1] MANIFOLD GP-FUEL (RH)  
21. 156-9756 Y [1] MANIFOLD GP-FUEL (LH)  
22. 205-8421 [1] TUBE AS  
23. 386-6229 C [3] ELBOW AS  
    (EACH INCLUDES)
  238-5081 [1] SEAL-O-RING  
  250-1497 [1] ELBOW (90-DEG)  
24. 030-7972 [1] ELBOW  
25. 0L-2070 [5] BOLT (3/8-16X2.25-IN)  
26. 0S-1590 [1] BOLT (3/8-16X2-IN)  
27. 0S-1594 [1] BOLT (3/8-16X1-IN)  
28. 0T-0065 [3] BOLT (3/8-16X3.5-IN)  
29. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
30. 1D-4541 C [1] BOLT (5/16-18X3-IN)  
31. 238-5081 C [6] SEAL-O-RING  
32. 2P-1296 [1] TEE  
33. 2P-7636 [1] CONNECTOR (3/4-16 STR-THD)  
34. 214-7568 C [33] SEAL-O-RING  
35. 214-7566 C [1] SEAL-O-RING  
36. 238-5080 C [1] SEAL-O-RING  
37. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
38. 5P-4900 [1] ELBOW-FLARED  
39. 5S-0003 [1] NUT (5/16-18-THD)  
40. 5M-2894 B [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 7K-3377 [2] PIPE  
42. 7N-6806 [4] SEAL-RECTANGULAR  
43. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
44. 9M-4584 [2] CONNECTOR  
45. 9S-4182 [1] PLUG (7/16-20-THD)  
46. 9S-4191 [1] PLUG (9/16-18-THD)  
49. 0L-1590 B [2] BOLT (1/4-28X1.125-IN)  
50. 0T-0065 B [1] BOLT (3/8-16X3.5-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61150087
 

156-9755: MANIFOLD GP-FUEL

156-9755 MANIFOLD GP-FUEL -RH
PART OF 234-8724 LINES GP-FUEL INJECTION
i01107931 SEBP6115
1569755 MANIFOLD GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0047 [8] CLAMP  
2. 147-3745 [8] WASHER-RETAINING  
3. 156-9748 [8] CLAMP  
4. 100-3237 [16] GROMMET  
5. 1D-4539 [8] BOLT (5/16-18X2.5-IN)  
6. 9N-0869 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
 

#SEBP61150088
 

156-9756: MANIFOLD GP-FUEL

156-9756 MANIFOLD GP-FUEL -LH
PART OF 234-8724 LINES GP-FUEL INJECTION
i01107958 SEBP6115
1569756 MANIFOLD GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0047 [8] CLAMP  
2. 147-3745 [8] WASHER-RETAINING  
3. 156-9748 [8] CLAMP  
4. 100-3237 [16] GROMMET  
5. 1D-4539 [8] BOLT (5/16-18X2.5-IN)  
6. 9N-0869 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
 

#SEBP61150089
 

100-8774: PUMP GP-FUEL INJECTION

100-8774 PUMP GP-FUEL INJECTION
Type 1
FOR USE WITH EUI
i01994840 SEBP6115
1008774 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 234-4182 [1] PLUG  
4. 250-1314 [1] INJECTOR GP-FUEL  
4A. 245-4907 [1] SEAL-O-RING  
4B. 245-4908 [1] SEAL-O-RING  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Improved Turbocharger Oil Drain Elbows
1984/12/12
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger
1986/01/01
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Turbine Oil Seal Improved On Turbochargers
1988/08/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing
1989/05/01
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak
1990/03/01
"Off-Size" Bearing Kits Available
1991/10/01
New Exhaust Bellows Used In Turbocharger Group
1992/06/01
New Bellows Assemblies Used In Turbocharger Groups
1992/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
New Turbocharger Supports Help Prevent Watercooled Exhaust Manifold Cracking{1059,1052}
1999/05/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
New Turbochargers Provide Increased Bearing Life {1052}
2000/03/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
A New Torque Specification Is Used for the V-Band Clamp of Turbochargers on Certain 3500 and C175-16 Engines {1052, 7553}
2012/02/01
Cat<SUP>&reg;</SUP> Reman Now Offers New Turbocharger and Cartridge Groups for Certain Commercial Engines {1052, 1053}
2014/09/12
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Accumulator
3500 Marine Engines
Turbocharger
3500 Marine Engines
Turbocharger
3500 Marine Engines
Systems Operation
Turbocharger
3500 Marine Engines
Accumulator
3500 Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Testing and Adjusting
Accumulator Pressure - Test
3500 Marine Engines
Disassembly and Assembly
Turbochargers (TW81, TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbocharger (W153)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW81)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (W153)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25
Turbine Oil Seal Improved On Turbochargers{1053,1077}
1988/08/08
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05
New Exhaust Bellows Used In Turbocharger Group{1052}
1992/06/15
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3516 :

TURBOCHARGER GP
159-8829 TURBOCHARGER GP
SHIELD GP-EXHAUST
505-1601 SHIELD GP-EXHAUST
SHIELD GP-EXHAUST
321-3857 SHIELD GP-EXHAUST
SHIELD GP-EXHAUST
317-1712 SHIELD GP-EXHAUST
SHIELD GP-EXHAUST
317-1708 SHIELD GP-EXHAUST
MANIFOLD GP-EXHAUST
161-2503 MANIFOLD GP-EXHAUST
LINES GP-TURBOCHARGER AIR
174-7083 LINES GP-TURBOCHARGER AIR
165-4194 CARTRIDGE GP-TURBOCHARGER
196-9548 TURBOCHARGER GP
TURBOCHARGER GP
354-5841 TURBOCHARGER GP
FILTER GP-FUEL
7W-9741 FILTER GP-FUEL
INJECTOR GP-FUEL
392-0214 INJECTOR GP-FUEL
LINES GP-FUEL INJECTION
234-8724 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
234-8724 LINES GP-FUEL INJECTION
MANIFOLD GP-FUEL
156-9755 MANIFOLD GP-FUEL
MANIFOLD GP-FUEL
156-9756 MANIFOLD GP-FUEL

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.