AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

257-8414 VALVE GP-SHUTTLE S/N R9J1-UP PART OF 353-2604 MANIFOLD GP-CONTROL FIELD REPLACEMENT FOR 213-4555 VALVE GP-SHUTTLE 14M


HYDRAULIC SYSTEM
VALVE GP-SHUTTLE
VALVE GP-SOLENOID
IMPLEMENTS
CIRCLE GP
DRAWBAR GP
MOLDBOARD GP

MOTOR GRADER 14M MOTOR GRADER R9J
 14M Motor Grader R9J00001-UP (MACHINE) POWERED BY C11 Engine SEBP6122 14M R9J   (2010)

HYDRAULIC SYSTEM

VALVE GP-SHUTTLE
VALVE GP-SHUTTLE
257-8414 VALVE GP-SHUTTLE
 

#SEBP61220950
 

257-8414: VALVE GP-SHUTTLE

257-8414 VALVE GP-SHUTTLE
S/N R9J1-UP
PART OF 353-2604 MANIFOLD GP-CONTROL
FIELD REPLACEMENT FOR 213-4555 VALVE GP-SHUTTLE
i02179242 SEBP6122
2578414 VALVE GP-SHUTTLE Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-0360 [1] SEAL-O-RING  
2. 161-6149 [1] SEAL-O-RING  
3. 095-1750 [1] SEAL-O-RING  
4. 161-6161 [1] RING-BACKUP  
5. 187-0541 [1] RING-BACKUP  
 

#SEBP61220951
 

152-8346: VALVE GP-SOLENOID

152-8346 VALVE GP-SOLENOID
S/N R9J1-UP
24-VOLT
PART OF 298-2600 LOCK GP-CENTERSHIFT
i00943054 SEBP6122
1528346 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 218-9894 [1] COIL AS (24-VOLT)  
1A. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
1B. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
1C. 1S-9593 [2] STRAP-CABLE  
2. 170-7485 [1] SPOOL AS-VALVE  
2A. 111-0343 [1] LOCKNUT (5/16-18-THD)  
2B. 8C-9987 [1] WASHER (8.3X28X2.5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  109-3036 [1] KIT-SEAL  
    (INCLUDES SEALS & RINGS)
 

#SEBP61220952
 

189-8627: VALVE GP-SOLENOID

189-8627 VALVE GP-SOLENOID
S/N R9J1-UP
24-VOLT
PART OF 353-2604 MANIFOLD GP-CONTROL
i01614982 SEBP6122
1898627 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 312-8629 [1] COIL AS (24-VOLT)  
2. 191-9247 [1] WASHER (19.15X31.65X2.36-MM THK)  
3. 198-2914 [1] NUT (3/4-32-THD)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

#SEBP61220953
 

278-1799: VALVE GP-SOLENOID

278-1799 VALVE GP-SOLENOID
S/N R9J1-UP
PART OF 487-3034 VALVE GP-BANK 4, 487-3021 VALVE GP-BANK 6, 259-6896, 259-6903, 259-6906, 259-6907, 259-6908, 259-6909, 259-6910, 259-6912, 259-6913, 259-6914, 259-6915, 261-3268, 290-0594, 382-3296, 382-3297, 382-3298, 382-3299, 382-3301, 382-3302, 382-3304, 382-3305, 382-3308, 382-3312, 382-3323, 488-7010 VALVE GP-CONTROL
AN ATTACHMENT
i02558898 SEBP6122
2781799 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-6711 [1] NUT-RETAINER (1/2-20-THD)  
2. 226-9622 [1] COIL AS-SOLENOID (24-VOLT)  
3. 4K-2039 [1] SEAL-O-RING  
4. 5L-4758 [1] SEAL-O-RING  
5. 6F-4855 [1] SEAL-O-RING  
 

#SEBP61220954
 

281-4298: CIRCLE & BEAM AS

281-4298 CIRCLE & BEAM AS
S/N R9J1-UP
PART OF 253-4650 CIRCLE GP
i02712501 SEBP6122
2814298 CIRCLE & BEAM AS Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-4911 [2] BOSS  
2. 8X-5312 [1] BEAM-BLADE  
3. 8X-5313 [1] BEAM-BLADE  
4. 8X-5428 [2] BLOCK  
5. 256-7143 [1] BRACKET AS  
  159-9539 M [2] NUT-WELD (M6X1-THD)  
6. 281-4295 [1] BRACKET AS  
7. 281-9451 [2] PLATE  
8. 9R-2672 M [1] BOSS-THREADED (M10X1.5X120-MM)  
9. 9R-4595 M [1] BOSS (M12X1.75X30-MM)  
10. 9R-9866 M [1] BOSS-THREADED (M10X1.5-THD)  
  M   METRIC PART
 

#SEBP61220955
 

420-4792: CIRCLE & BEAM AS

420-4792 CIRCLE & BEAM AS
S/N R9J1-UP
PART OF 253-4650 CIRCLE GP
i06636298 SEBP6122
4204792 CIRCLE & BEAM AS Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5312 [1] BEAM-BLADE  
2. 8X-5313 [1] BEAM-BLADE  
3. 9R-2613 M [1] BOSS-WELD (M10X1.5X25-MM)  
4. 9R-4595 M [1] BOSS (M12X1.75X30-MM)  
5. 9R-9866 M [1] BOSS-THREADED (M10X1.5-THD)  
6. 6G-4911 [2] BOSS  
7. 8X-5428 [2] BLOCK  
8. 256-7143 [1] BRACKET AS  
9. 281-4295 [1] BRACKET AS  
10. 281-9451 [2] PLATE  
  M   METRIC PART
 

#SEBP61220956
 

253-4650: CIRCLE GP

253-4650 CIRCLE GP
S/N R9J1-UP
PART OF 349-2555 COMMON AR
Type 1
i02179477 SEBP6122
2534650 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-4831 [2] SHAFT  
2. 243-6700 [1] BRACKET AS  
3. 253-4627 [2] STRIP-WEAR  
4. 253-4628 [2] STRIP-WEAR  
5. 253-4629 [4] RETAINER  
6. 253-4635 [2] PLATE AS  
7. 253-4643 B [6] SHIM (2-MM THK)  
8. 269-8248 [4] RETAINER  
9. 281-4298 Y [1] CIRCLE & BEAM AS  
10. 285-6124 [16] WASHER-HARD (16X35X5-MM THK)  
11. 446-1523 [2] STRIP-WEAR  
12. 129-2220 M [4] SETSCREW-SOCKET (M20X2.5X80-MM)  
13. 283-1578 [4] WASHER-HARD (22X45X10-MM THK)  
14. 4J-1888 [4] PIN-COTTER  
15. 5F-3715 [4] NUT-SLOTTED HEX (2-12-THD)  
16. 6V-7688 M [6] LOCKNUT (M20X2.5-THD)  
17. 7Y-0725 [8] WASHER-HARD (52X92X8-MM THK)  
18. 8C-6854 M [16] BOLT (M14X2X50-MM)  
19. 8T-8555 M [2] SETSCREW-SOCKET (M20X2.5-THD)  
20. 8W-4167 [8] BUSHING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP61220957
 

253-4650: CIRCLE GP

253-4650 CIRCLE GP
S/N R9J1-UP
PART OF 349-2555 COMMON AR
Type 2
i06999865 SEBP6122
2534650 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-4831 [2] SHAFT  
2. 420-4792 Y [1] CIRCLE & BEAM AS  
3. 4J-1888 [4] PIN-COTTER  
4. 5F-3715 [4] NUT-SLOTTED HEX (2-12-THD)  
5. 7Y-0725 [8] WASHER-HARD (52X92X8-MM THK)  
6. 8W-4167 C [4] BUSHING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61220958
 

257-4929: DRAWBAR GP

257-4929 DRAWBAR GP
S/N R9J1-UP
PART OF 349-2555 COMMON AR
OPTIONAL FIELD REPLACEMENT ORDER 281-9445 STRIP-WEAR
i02179478 SEBP6122
2574929 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 6G-4896 [1] BALL  
3. 6K-6444 [2] SPACER  
5. 185-7115 B [42] SHIM (0.5-MM THK)  
6. 251-8250 [1] DRAWBAR AS  
6A. 178-3087 [3] STUD-BALL  
  185-7120 [1] SHAFT AS  
  9R-2613 M [6] BOSS-WELD (M10X1.5X25-MM)  
  9R-2672 M [2] BOSS-THREADED (M10X1.5X120-MM)  
  257-4933 [1] PLATE  
  302-6334 [2] GUSSET  
7. 308-6304 [6] SHOE-CIRCLE GUIDE  
8. 257-4932 B [12] SHIM (0.25-MM THK)  
9. 259-4468 [1] CAP  
10. 259-4469 [1] ADAPTER  
11. 259-4470 B [1] SHIM (0.12-MM THK)  
12. 259-4471 B [3] SHIM (0.25-MM THK)  
13. 259-4472 B [3] SHIM (0.76-MM THK)  
14. 259-4473 B [2] SHIM (1.52-MM THK)  
15. 268-5743 [2] PLATE  
16. 278-1415 [2] PLATE  
17. 283-1578 [2] WASHER-HARD (22X45X10-MM THK)  
18. 287-5701 M [22] BOLT (M20X2.5X50-MM)  
19. 288-3686 M [18] BOLT (M24X3X125-MM)  
20. 288-3717 [18] WASHER-HARD (26X52X6-MM THK)  
21. 292-5889 [12] SETSCREW (1-8X3.25-IN)  
23. 302-6332 [6] PLATE  
24. 302-6333 [6] PLATE  
25. 112-3926 M [8] BOLT (M20X2.5X110-MM)  
26. 213-5007 M [2] BOLT (M20X2.5X80-MM)  
27. 8T-4123 [12] WASHER (22X35X3.5-MM THK)  
28. 8T-4131 M [4] NUT (M20X2.5-THD)  
29. 287-5718 [20] WASHER-HARD (22X60X6-MM THK)  
30. 1D-6306 [12] NUT (1-8-THD)  
31. 101-7396 M [2] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
32. 9S-8892 [6] BOLT-12 POINT HEAD (3/4-16X3.5-IN)  
33. 257-4932 BJ [24] SHIM (0.25-MM THK)  
34. 185-7115 BJ [60] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  J   (SHIMS MARKED J ARE TO BE LOCATED IN TOOLBOX)
  M   METRIC PART
 

#SEBP61220959
 

525-5599: MOLDBOARD AS

525-5599 MOLDBOARD AS
S/N R9J1-UP
3.66-M (12-FT)
PART OF 517-7343, 517-7344, 517-7345, 517-7346 BLADE & MTG GP-SNOW
AN ATTACHMENT
i07103369 SEBP6122
5255599 MOLDBOARD AS Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-3033 [2] EDGE-CUTTING  
2. 525-5598 [1] BUMPER  
3. 5J-4773 [26] BOLT-PLOW (3/4-10X2.5-IN)  
4. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
5. 2J-3506 [26] NUT-FULL (3/4-10-THD)  
6. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
7. 5P-8248 [26] WASHER-HARD (20X36.5X3.5-MM THK)  
8. 456-6896 [4] WASHER (63.5X114.3X15.875-MM THK)  
9. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

Information:

Caterpillar Parts SIS Catalog 14M :

VALVE GP-RELIEF
251-8330 VALVE GP-RELIEF
VALVE GP-RELIEF
133-5330 VALVE GP-RELIEF
VALVE GP-PUMP CONTROL
271-6847 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
168-2210 VALVE GP-PUMP CONTROL
VALVE GP-PRESSURE REDUCING
345-6946 VALVE GP-PRESSURE REDUCING
VALVE GP-PRESSURE REDUCING
345-4472 VALVE GP-PRESSURE REDUCING
VALVE GP-PRESSURE REDUCING
252-8038 VALVE GP-PRESSURE REDUCING
VALVE GP-DIVERTER
277-2132 VALVE GP-DIVERTER
VALVE GP-SOLENOID
152-8346 VALVE GP-SOLENOID
VALVE GP-SOLENOID
189-8627 VALVE GP-SOLENOID
VALVE GP-SOLENOID
278-1799 VALVE GP-SOLENOID
CIRCLE & BEAM AS
281-4298 CIRCLE & BEAM AS
CIRCLE & BEAM AS
420-4792 CIRCLE & BEAM AS
CIRCLE GP
253-4650 CIRCLE GP
CIRCLE GP
253-4650 CIRCLE GP
DRAWBAR GP
257-4929 DRAWBAR GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.