ELECTRICAL AND STARTING SYSTEM
WIRING GPLIGHTING GP
WIRING GP
SENSOR GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP61230550
260-1870: WIRING GP-REAR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [28] | STRAP-CABLE | |
| 2. | 9X-9365 | [1] | BRACKET (LAMP) | |
| 3. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(COMPRESSOR, HIGH SIDE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1386 E | SLEEVE (25-CM) | |||
| 4. | 134-3355 | [1] | STRAP AS | |
| 5. | 353-4515 | [1] | SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 112-4550 E | SLEEVE (19-CM) | |||
| 271-2178 | [1] | SWITCH AS-TOGGLE (GROUND LEVEL SHUTDOWN) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6. | 149-6371 | [1] | SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(COMPRESSOR, LOW SIDE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 189-3158 | [2] | SUPPRESSOR-ARC | |
| 8. | 193-3973 | [2] | STRAP-CABLE | |
| 9. | 274-6717 C | [1] | SENSOR-PRESSURE (TURBOCHARGER INLET) | |
| 10. | 204-8000 | [24] | MOUNTING-CABLE TIE | |
| 11. | 240-7193 | [1] | RESISTOR AS (500-OHM, 2-WATT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 256-8730 | [1] | PLATE AS | |
| 13. | 358-3851 C | [1] | HARNESS AS-SWITCH | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9X-4998 | [1] | SOCKET (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 14. | 263-6888 | [1] | HARNESS AS-WIRING | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 15. | 263-6889 | [1] | HARNESS AS-SWITCH (FUEL LEVEL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 16. | 272-9709 | [1] | BRACKET AS | |
| 17. | 287-6156 Y | [1] | SENSOR & MTG GP-POSITION (ARTICULATION) | |
| 18. | 379-1617 | [1] | HARNESS AS-REAR | |
| 7G-7917 | [2] | PLUG-SEAL | ||
| 7G-7919 | [6] | PLUG-SEAL | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 8N-1518 | [2] | PLUG AS-CONNECTOR (25-PIN) | ||
| 8N-1521 | [2] | BELL AS-END | ||
| 9X-6857 | [30] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8N-1541 | [8] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1549 | [4] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8730 | [130] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 9W-0844 | [24] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-4391 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-5615 | [2] | SEAL (INTERFACE, 70-PIN) | ||
| 7K-1181 | [2] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 140-1809 E | TUBE-HEAT SHRINK (76.2-MM DIA)(20-CM) | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 1P-0810 E | TAPE-ELECTRICAL (70-CM) | |||
| 233-9494 E | CONDUIT (47-MM OD)(67-CM) | |||
| 19. | 379-1618 C | [1] | HARNESS AS-REAR | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7G-7917 | [6] | PLUG-SEAL | ||
| 7G-7919 | [5] | PLUG-SEAL | ||
| 8N-1517 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 8N-1522 | [1] | NUT (2-1/4-16-THD) | ||
| 8N-1518 | [1] | PLUG AS-CONNECTOR (25-PIN) | ||
| 8N-1521 | [2] | BELL AS-END | ||
| 8N-1523 | [1] | LOCKWASHER | ||
| 9X-6856 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-6857 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8N-1540 | [4] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1541 | [4] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1545 | [1] | SOCKET-CONNECTOR (8-GA) | ||
| 8N-1548 | [2] | PIN-CONNECTOR (4-GA) | ||
| 8N-1549 | [2] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8729 | [68] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [53] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [105] | PLUG-SEAL | ||
| 9W-0844 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [14] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [132] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7K-1181 | [8] | STRAP-CABLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(52-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(55-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(55-CM) | |||
| 126-1768 | [20] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [3] | COVER-CONNECTOR | ||
| 2L-8049 | [1] | TERMINAL-RING (6-GA, NO. 10 SCREW) | ||
| -OR- | ||||
| 2L-8057 | [1] | TERMINAL-RING (8-GA, NO. 10 SCREW) | ||
| 2L-8052 | [2] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [2] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [3] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 7N-9017 | [1] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 155-2255 | [4] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [12] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT CONTAINS PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 214-4208 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 20. | 288-5535 | [1] | BRACKET AS | |
| 21. | 301-5180 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 6F-0612 | [1] | NUT-JAM (1/4-28-THD) | ||
| 8S-7048 | [1] | ROD END | ||
| 9L-3334 | [1] | NUT-PLATED (1/4-28-THD, LH) | ||
| 036-7232 | [1] | ROD END | ||
| 22. | 130-5300 | [15] | CLIP | |
| 23. | 132-5789 | [6] | CLIP (LADDER) | |
| 24. | 133-6934 | [2] | SPACER (11X20X25-MM THK) | |
| 25. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 26. | 143-0273 | [2] | CLAMP | |
| 27. | 3E-5169 | [1] | GUARD-SWITCH | |
| 28. | 3J-1907 | [1] | SEAL-O-RING | |
| 29. | 4D-7388 | [1] | CLIP (LOOP) | |
| 30. | 4P-7581 | [4] | CLIP (LADDER) | |
| 33. | 5K-3294 | [1] | CLIP (SLOT) | |
| 34. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 36. | 5P-7470 | [2] | CLIP (SLOT) | |
| 37. | 5P-7471 | [2] | CLIP (TAB) | |
| 38. | 5P-7703 | [2] | GROMMET (52-MM ID) | |
| 39. | 5P-9085 | [1] | CLIP (LOOP) | |
| 40. | 5P-9297 | [3] | CLIP (LOOP) | |
| 41. | 6D-4244 | [1] | CLIP (LOOP) | |
| 43. | 7G-7053 | [1] | GROMMET | |
| 44. | 7K-1181 | [20] | STRAP-CABLE | |
| 45. | 8M-2770 | [1] | CLIP (LOOP) | |
| 46. | 8T-4121 | [49] | WASHER-HARD (11X21X2.5-MM THK) | |
| 47. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 48. | 8T-4136 M | [11] | BOLT (M10X1.5X25-MM) | |
| 49. | 8T-4137 M | [25] | BOLT (M10X1.5X20-MM) | |
| 50. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 51. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 52. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 53. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 54. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 55. | 8T-4191 M | [6] | BOLT (M10X1.5X16-MM) | |
| 56. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 57. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 58. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 59. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 60. | 8T-6912 BM | [1] | BOLT (M8X1.25X50-MM) | |
| 61. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 62. | 9X-7378 | [2] | SEAL-O-RING | |
| 64. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 65. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 66. | 204-2281 | [22] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230551
260-1870: WIRING GP-REAR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [27] | STRAP-CABLE | |
| 3. | 6V-0894 | [1] | SEAL-O-RING | |
| 4. | 7K-1181 | [22] | STRAP-CABLE | |
| 5. | 9X-9365 | [1] | BRACKET (LAMP) | |
| 6. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(COMPRESSOR, HIGH SIDE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 134-3355 | [1] | STRAP AS | |
| 8. | 149-6371 | [1] | SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(COMPRESSOR, LOW SIDE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 166-0690 | [1] | BLOCK AS-MOUNTING | |
| 10. | 189-3158 | [2] | SUPPRESSOR-ARC | |
| 12. | 204-2281 | [24] | STRAP-CABLE | |
| 13. | 204-8000 | [24] | MOUNTING-CABLE TIE | |
| 14. | 240-7193 | [1] | RESISTOR AS (500-OHM, 2-WATT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 15. | 256-8730 | [1] | PLATE AS | |
| 16. | 263-6888 | [1] | HARNESS AS-WIRING | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 17. | 263-6889 | [1] | HARNESS AS-SWITCH (FUEL LEVEL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 18. | 272-9709 | [1] | BRACKET AS | |
| 19. | 274-6717 | [1] | SENSOR-PRESSURE (TURBOCHARGER INLET) | |
| 20. | 287-6155 | [1] | LEVER | |
| 21. | 288-5535 | [1] | BRACKET AS | |
| 22. | 301-5180 | [1] | LINK AS | |
| 6F-0612 | [1] | NUT-JAM (1/4-28-THD) | ||
| 8S-7048 | [1] | ROD END | ||
| 9L-3334 | [1] | NUT-PLATED (1/4-28-THD, LH) | ||
| 036-7232 | [1] | ROD END | ||
| 23. | 353-4515 | [1] | SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 112-4550 E | SLEEVE (19-CM) | |||
| 271-2178 | [1] | SWITCH AS-TOGGLE (GROUND LEVEL SHUTDOWN) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 24. | 358-3851 | [1] | HARNESS AS-SWITCH | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 25. | 373-4328 | [1] | SENSOR GP-POSITION (ROTARY) | |
| 26. | 398-2946 | [1] | HARNESS AS-REAR (MAIN) | |
| 7G-7917 | [2] | PLUG-SEAL | ||
| 7G-7919 | [6] | PLUG-SEAL | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 8N-1518 | [2] | PLUG AS-CONNECTOR (25-PIN) | ||
| 8N-1521 | [2] | BELL AS-END | ||
| 9X-6857 | [30] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8N-1541 | [8] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1549 | [4] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8730 | [132] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 9W-0844 | [24] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-4391 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-5615 | [2] | SEAL (INTERFACE, 70-PIN) | ||
| 7K-1181 | [2] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 140-1809 E | TUBE-HEAT SHRINK (76.2-MM DIA)(20-CM) | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 368-2370 BE | TAPE | |||
| 233-9494 E | CONDUIT (47-MM OD)(67-CM) | |||
| 27. | 398-4877 | [1] | BRACKET | |
| 28. | 426-1834 C | [1] | HARNESS AS-REAR (ARTICULATION) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7G-7917 | [6] | PLUG-SEAL | ||
| 7G-7919 | [5] | PLUG-SEAL | ||
| 8N-1517 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 8N-1522 | [1] | NUT (2-1/4-16-THD) | ||
| 8N-1518 | [1] | PLUG AS-CONNECTOR (25-PIN) | ||
| 8N-1521 | [2] | BELL AS-END | ||
| 8N-1523 | [1] | LOCKWASHER | ||
| 9X-6856 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-6857 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8N-1540 | [4] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1541 | [4] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1545 | [1] | SOCKET-CONNECTOR (8-GA) | ||
| 8N-1548 | [2] | PIN-CONNECTOR (4-GA) | ||
| 8N-1549 | [2] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8729 | [54] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [101] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [105] | PLUG-SEAL | ||
| 9W-0844 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [14] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [23] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [84] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7K-1181 | [8] | STRAP-CABLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(52-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(65-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(55-CM) | |||
| 126-1768 | [19] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [3] | COVER-CONNECTOR | ||
| 2L-8049 | [1] | TERMINAL-RING (6-GA, NO. 10 SCREW) | ||
| -OR- | ||||
| 2L-8057 | [1] | TERMINAL-RING (8-GA, NO. 10 SCREW) | ||
| 2L-8052 | [2] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [2] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [3] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 7N-9017 | [1] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 155-2255 | [4] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [12] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT CONTAINS PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 214-4208 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 29. | 130-5300 | [15] | CLIP | |
| 30. | 132-5789 | [6] | CLIP (LADDER) | |
| 31. | 133-6934 | [2] | SPACER (11X20X25-MM THK) | |
| 32. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 33. | 143-0273 | [1] | CLAMP | |
| 34. | 2F-7888 | [2] | SCREW-MACHINE (10-32X1.25-IN) | |
| 35. | 3B-4619 | [1] | PIN-COTTER | |
| 36. | 3J-1907 | [1] | SEAL-O-RING | |
| 37. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 38. | 4D-7388 | [1] | CLIP (LOOP) | |
| 39. | 4M-5281 | [2] | BOLT (1/4-20X0.75-IN) | |
| 40. | 4P-7581 | [6] | CLIP (LADDER) | |
| 41. | 5K-3294 | [1] | CLIP (SLOT) | |
| 42. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 43. | 5P-7470 | [2] | CLIP (SLOT) | |
| 44. | 5P-7471 | [2] | CLIP (TAB) | |
| 45. | 5P-7703 | [2] | GROMMET (52-MM ID) | |
| 46. | 5P-9085 | [1] | CLIP (LOOP) | |
| 47. | 5P-9297 | [3] | CLIP (LOOP) | |
| 48. | 6D-4244 | [1] | CLIP (LOOP) | |
| 49. | 7G-7053 | [1] | GROMMET | |
| 50. | 8M-2770 | [1] | CLIP (LOOP) | |
| 51. | 8T-4121 | [50] | WASHER-HARD (11X21X2.5-MM THK) | |
| 52. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 53. | 8T-4136 M | [21] | BOLT (M10X1.5X25-MM) | |
| 54. | 8T-4137 M | [16] | BOLT (M10X1.5X20-MM) | |
| 55. | 8T-4138 M | [5] | BOLT (M6X1X20-MM) | |
| 56. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 57. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 58. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 59. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 60. | 8T-4191 M | [6] | BOLT (M10X1.5X16-MM) | |
| 61. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 62. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 63. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 64. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 65. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 66. | 8T-6912 BM | [1] | BOLT (M8X1.25X50-MM) | |
| 67. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 68. | 9X-7378 | [2] | SEAL-O-RING | |
| 69. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 70. | 311-8740 | [1] | ADAPTER-CONNECTOR | |
| 71. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP61230552
305-0037: WIRING GP-REAR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 300-4957 | [1] | CABLE AS (STARTER MOTOR) | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 9X-9120 | [1] | BOOT (RED) | ||
| 9X-9825 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8049 E | CABLE (00-GA, RED)(160-CM) | |||
| 3. | 300-5583 | [1] | BRACKET AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 6D-4636 | [2] | CLIP (LOOP) | |
| 5. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 8. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 10. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 4S-1962 | [4] | CLIP (LOOP) | |
| 13. | 7V-6571 | [6] | GROMMET | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP61230553
250-0902: WIRING GP-REAR LIGHTING
250-0902 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N R9H1-UP
FOLD DOWN ARMS
PART OF 298-0602, 298-0603, 425-3410, 425-3411 LIGHTING GP-ROADING
CANNOT BE USED WITH @@@@@257-8028@@@@@
AN ATTACHMENT
S/N R9H1-UP
FOLD DOWN ARMS
PART OF 298-0602, 298-0603, 425-3410, 425-3411 LIGHTING GP-ROADING
CANNOT BE USED WITH @@@@@257-8028@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [21] | STRAP-CABLE | |
| 2. | 7X-2393 | [4] | BUMPER-CONICAL | |
| 3. | 9S-1316 | [2] | SPRING | |
| 4. | 334-8049 CY | [2] | LAMP GP-SIGNAL (24-VOLT, STOP, TAIL) | |
| 5. | 201-5464 Y | [2] | LAMP GP-SIGNAL (12-VOLT, 24-VOLT, TURN) | |
| 6. | 245-2810 | [1] | BRACKET AS (RH) | |
| 7. | 245-2811 | [1] | BRACKET AS (LH) | |
| 8. | 245-2812 | [1] | ARM AS (RH) | |
| 5D-9629 | [2] | ROD | ||
| 9. | 245-2813 | [1] | ARM AS (LH) | |
| 5D-9629 | [3] | ROD | ||
| 10. | 245-2814 | [2] | ROD | |
| 11. | 261-1502 Y | [2] | LAMP GP (24-VOLT) | |
| 12. | 288-5514 | [1] | HARNESS AS-REAR LIGHTING | |
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [4] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [24] | PLUG-SEAL | ||
| 9W-0844 | [18] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM) | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 15. | 117-9409 | [2] | GROMMET | |
| 16. | 129-3180 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 17. | 3B-5301 | [2] | PIN-COTTER | |
| 18. | 5C-2890 M | [18] | NUT (M6X1-THD) | |
| 20. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 21. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4176 M | [2] | BOLT (M12X1.75X90-MM) | |
| 23. | 8T-4205 | [18] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 24. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 132-0338 | [8] | WASHER-PLASTIC (13X31.7X0.8-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230554
257-8028: WIRING GP-REAR LIGHTING
257-8028 WIRING GP-REAR LIGHTING
S/N R9H1-UP
CANNOT BE USED WITH @@@@@250-0902@@@@@
AN ATTACHMENT
S/N R9H1-UP
CANNOT BE USED WITH @@@@@250-0902@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [20] | STRAP-CABLE | |
| 2. | 334-8049 CY | [2] | LAMP GP-SIGNAL (24-VOLT, STOP, TAIL) | |
| 3. | 236-1928 | [1] | BRACKET AS | |
| 4. | 239-6379 | [1] | BRACKET AS | |
| 5. | 261-1502 Y | [2] | LAMP GP (24-VOLT) | |
| 6. | 288-5514 | [1] | HARNESS AS-REAR LIGHTING | |
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [4] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [24] | PLUG-SEAL | ||
| 9W-0844 | [18] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM) | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 7. | 4P-7581 | [1] | CLIP (LADDER) | |
| 8. | 5C-2890 M | [12] | NUT (M6X1-THD) | |
| 9. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 10. | 7K-1181 | [1] | STRAP-CABLE | |
| 11. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4172 M | [6] | BOLT (M10X1.5X80-MM) | |
| 13. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 14. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230555
260-1872: WIRING GP-SECONDARY STEERING
260-1872 WIRING GP-SECONDARY STEERING
S/N R9H1-UP
PART OF 349-2556 COMMON AR
S/N R9H1-UP
PART OF 349-2556 COMMON AR
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-8767 | [2] | WASHER (10.5X60X3-MM THK) | |
| 2. | 3S-2093 | [13] | STRAP-CABLE | |
| 3. | 6G-2256 | [1] | CLAMP | |
| 4. | 6G-2263 | [1] | SPACER (10.5X19X28.5-MM THK) | |
| 5. | 9X-9365 | [1] | BRACKET (LAMP) | |
| 6. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 7. | 268-6609 | [1] | CABLE AS | |
| 1S-7252 | [2] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 6V-2722 | [1] | TUBE-HEAT SHRINK (25.4-MM DIA) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 9G-8909 | [2] | COVER-TERMINAL (BLACK) | ||
| 8. | 283-5827 | [1] | CABLE AS | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 159-8049 E | CABLE (00-GA, RED)(343-CM) | |||
| 9. | 283-5828 | [1] | CABLE AS | |
| 1S-7252 | [2] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 8T-8827 | [2] | BOOT (RED) | ||
| 159-8049 E | CABLE (00-GA, RED)(39-CM) | |||
| 10. | 288-5512 | [1] | HARNESS AS-PUMP | |
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 7N-9017 | [2] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 11. | 179-0006 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT TO 32-VOLT)(HYD TANK FILL PUMP/MOTOR RELAY) | |
| 12. | 8S-0948 | [1] | CLIP (SLOT) | |
| 13. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 14. | 7K-1181 | [1] | STRAP-CABLE | |
| 15. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 17. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 20. | 4S-1962 | [8] | CLIP (LOOP) | |
| 21. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 22. | 7V-6571 | [8] | GROMMET | |
| 23. | 2V-1771 | [1] | GROMMET | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP61230556
250-0900: WIRING GP-SENSOR
250-0900 WIRING GP-SENSOR -VARIABLE BLADE FLOAT
S/N R9H1-UP
PART OF 271-3652, 366-3375, 463-2298 FLOAT AR-BLADE
AN ATTACHMENT
S/N R9H1-UP
PART OF 271-3652, 366-3375, 463-2298 FLOAT AR-BLADE
AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-6934 | [1] | SPACER (11X20X25-MM THK) | |
| 2. | 260-1884 | [1] | HARNESS AS-SOLENOID | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 3. | 4P-7581 | [1] | CLIP (LADDER) | |
| 4. | 4P-8134 | [4] | CLIP (LADDER) | |
| 5. | 7K-1181 | [13] | STRAP-CABLE | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 8. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| M | METRIC PART | |||
#SEBP61230557
363-4325: WIRING GP-SENSOR
363-4325 WIRING GP-SENSOR
S/N R9H806-992
PART OF 399-4628 GRADE CONTROL AR
ALSO AN ATTACHMENT
S/N R9H806-992
PART OF 399-4628 GRADE CONTROL AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-4363 | [1] | RING-RETAINING | |
| 2. | 276-6146 | [1] | SENSOR AS-ANGLE (AS400TC)(MAINFALL) | |
| 2A. | 276-6146 | [1] | SENSOR AS-ANGLE (AS400TC)(BLADE SLOPE) | |
| 3. | 363-0347 | [1] | SENSOR AS-ROTARY POSITION | |
| 269-3277 | [1] | RING | ||
| 4. | 365-8763 | [1] | BRACKET | |
| 5. | 365-8764 | [1] | BRACKET | |
| 6. | 3S-2093 | [3] | STRAP-CABLE | |
| 7. | 270-7137 | [1] | BOLT | |
| 8. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 10. | 9X-6155 M | [4] | BOLT-SOCKET HEAD (M6X1X16.7-MM) | |
| 11. | 8T-3844 M | [4] | BOLT (M6X1X70-MM) | |
| 12. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 329-3356 M | [1] | NUT (M12X1.75-THD) | |
| 16. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 452-0944 | [1] | COLLAR | |
| M | METRIC PART | |||
#SEBP61230558
363-4325: WIRING GP-SENSOR
363-4325 WIRING GP-SENSOR
S/N R9H993-UP
PART OF 399-4628, 399-4629 GRADE CONTROL AR
ALSO AN ATTACHMENT
S/N R9H993-UP
PART OF 399-4628, 399-4629 GRADE CONTROL AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 491-1256 C | [1] | BRACKET AS | |
| 2. | 276-6146 | [1] | SENSOR AS-ANGLE (AS400TC)(MAINFALL) | |
| 2A. | 276-6146 | [1] | SENSOR AS-ANGLE (AS400TC)(BLADE SLOPE) | |
| 3. | 363-0347 | [1] | SENSOR AS-ROTARY POSITION | |
| 269-3277 | [1] | RING | ||
| 4. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 491-1257 C | [1] | BRACKET | |
| 6. | 3S-2093 | [3] | STRAP-CABLE | |
| 7. | 498-8523 C | [2] | COLLAR | |
| 8. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 10. | 9X-2043 CM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 11. | 8T-3844 M | [4] | BOLT (M6X1X70-MM) | |
| 12. | 8T-4223 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 329-3356 CM | [2] | NUT (M12X1.75-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP61230559
230-0961: WIRING GP-UNIT INJECTOR
230-0961 WIRING GP-UNIT INJECTOR
S/N TXF1909-UP; MHX1214-UP
PART OF 267-0009, 286-5804, 301-2265, 357-6593 ENGINE AR-CORE
AN ATTACHMENT
S/N TXF1909-UP; MHX1214-UP
PART OF 267-0009, 286-5804, 301-2265, 357-6593 ENGINE AR-CORE
AN ATTACHMENT
For full view, you need register
Parts for your 16M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-6508 | [6] | CAP AS | |
| 2. | 418-7614 Y | [1] | HARNESS AS-WIRING (UNIT INJECTOR) | |
| 3. | 6V-8837 M | [5] | BOLT (M6X1X16-MM) | |
| 4. | 6V-8836 M | [2] | BOLT (M6X1X14-MM) | |
| 5. | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| 6. | 237-9960 | [5] | CLIP (LADDER) | |
| 7. | 3S-2093 | [5] | STRAP-CABLE | |
| 8. | 5P-0537 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
