AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

342-8961 SUPPORT GP-CONTROL S/N R9H1-UP PART OF 233-3107 CAB AR, 385-5956 CAB GP ALSO AN ATTACHMENT 16M


OPERATOR STATION
SUPPORT GP
SEAT GP
WASHER GP-WINDOW
CAB GP

MOTOR GRADER 16M MOTOR GRADER R9H
 16M Motor Grader R9H00001-UP (MACHINE) POWERED BY C13 Engine SEBP6123 16M R9H   (2010)

OPERATOR STATION

SUPPORT GP
SUPPORT GP-CONTROL
233-3224 SUPPORT GP-CONTROL
SUPPORT GP-CONTROL
233-3225 SUPPORT GP-CONTROL
SUPPORT GP-CONTROL
342-8961 SUPPORT GP-CONTROL
SUPPORT GP-CONTROL
345-1271 SUPPORT GP-CONTROL
SUPPORT GP-CONTROL
345-1272 SUPPORT GP-CONTROL
 

#SEBP61231110
 

342-8961: SUPPORT GP-CONTROL

342-8961 SUPPORT GP-CONTROL
S/N R9H1-UP
PART OF 233-3107 CAB AR, 385-5956 CAB GP
ALSO AN ATTACHMENT
i03655405 SEBP6123
3428961 SUPPORT GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
2. 233-3224 Y [1] SUPPORT GP-CONTROL (JOYSTICK, LH)  
3. 233-3225 Y [1] SUPPORT GP-CONTROL (JOYSTICK, RH)  
4. 251-2247 [2] GROMMET  
5. 251-2272 [1] COVER  
6. 251-2273 [1] COVER  
7. 251-2274 [1] COVER  
8. 251-2275 [1] COVER  
9. 280-7477 [1] FILM-INSTRUCTION (OPERATOR CONSOLE, LH)  
10. 280-7478 [1] FILM-INSTRUCTION (OPERATOR CONSOLE, RH)  
11. 292-0609 Y [1] ARMREST GP (RH)  
12. 292-0617 Y [1] ARMREST GP (LH)  
13. 297-4147 [1] COVER (LH)  
14. 297-4148 [1] COVER (RH)  
15. 312-1714 [1] FILM-INSTRUCTION (ADJUSTMENT CONTROL)  
16. 114-6658 [20] WASHER (6.5X17X1-MM THK)  
17. 6V-5839 [8] WASHER (11X21X2.5-MM THK)  
18. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
19. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
20. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
21. 9X-2044 M [20] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
23. 116-8376 E SEAL (6-CM EACH)  
23A. 116-8376 E SEAL (17-CM EACH)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP61231111
 

345-1271: SUPPORT GP-CONTROL

345-1271 SUPPORT GP-CONTROL -JOYSTICK, RH
S/N R9H1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
AN ATTACHMENT
i04040268 SEBP6123
3451271 SUPPORT GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [10] NUT-CLIP (M6X1-THD)  
2. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
3. 233-3248 [2] BUSHING  
4. 233-3252 [1] SHAFT AS  
5. 233-3270 [1] SUPPORT AS (RH)  
6. 233-3275 [1] BRACKET AS (RH)  
7. 251-2247 [2] GROMMET  
8. 252-1805 Y [1] CUSHION GP-ARM  
9. 252-1808 [1] SUPPORT AS (RH)  
  3G-0622 [2] RING-RETAINING  
  7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  294-1001 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
10. 253-3482 [1] KNOB AS (ARMREST ADJUSTMENT)  
11. 253-3483 [1] PLATE AS  
12. 253-3484 [2] WASHER (13X46X3.5-MM THK)  
13. 292-0609 Y [1] ARMREST GP (RH)  
14. 456-1559 [1] ADJUSTER AS  
15. 345-1273 [1] COVER  
16. 345-1274 [1] COVER  
17. 346-0626 [1] BRACKET  
18. 346-9581 [1] FILM-IDENTIFICATION (OPERATOR CONTROLS, RH)  
19. 114-6658 [10] WASHER (6.5X17X1-MM THK)  
20. 5C-9553 M [2] BOLT (M6X1X16-MM)  
21. 7J-5925 [1] PIN-COTTER  
22. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
23. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
24. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4908 M [7] BOLT (M8X1.25X25-MM)  
26. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
27. 9X-2045 M [10] SCREW-TRUSS HEAD (M6X1X20-MM)  
28. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
29. 8T-6936 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP61231112
 

345-1272: SUPPORT GP-CONTROL

345-1272 SUPPORT GP-CONTROL -JOYSTICK, LH
S/N R9H1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
AN ATTACHMENT
i04040269 SEBP6123
3451272 SUPPORT GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [10] NUT-CLIP (M6X1-THD)  
2. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
3. 233-3227 [1] SUPPORT AS (LH)  
4. 233-3248 [2] BUSHING  
5. 233-3252 [1] SHAFT AS  
6. 251-2247 [1] GROMMET  
7. 252-1805 Y [1] CUSHION GP-ARM  
8. 252-1807 [1] SUPPORT AS (LH)  
  3G-0622 [2] RING-RETAINING  
  7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  294-1001 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
9. 253-3482 [1] KNOB AS (ARMREST ADJUSTMENT)  
10. 253-3483 [1] PLATE AS  
11. 253-3484 [2] WASHER (13X46X3.5-MM THK)  
12. 272-8329 [1] BRACKET AS (LH)  
13. 292-0617 Y [1] ARMREST GP (LH)  
14. 456-1559 [1] ADJUSTER AS  
15. 345-1275 [1] COVER  
16. 345-1276 [1] COVER  
17. 346-0627 [1] BRACKET  
18. 346-9580 [1] FILM-IDENTIFICATION (OPERATOR CONTROLS, LH)  
19. 114-6658 [10] WASHER (6.5X17X1-MM THK)  
20. 5C-9553 M [2] BOLT (M6X1X16-MM)  
21. 7J-5925 [1] PIN-COTTER  
22. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
23. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
24. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4908 M [7] BOLT (M8X1.25X25-MM)  
26. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
27. 9X-2044 M [10] SCREW-TRUSS HEAD (M6X1X16-MM)  
28. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
29. 8T-6936 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP61231113
 

256-8768: SUSPENSION GP-SEAT

256-8768 SUSPENSION GP-SEAT -AIR
S/N R9H1-UP
24-VOLT
PART OF 238-6683 SEAT GP-SUSPENSION
ALSO AN ATTACHMENT
i02164896 SEBP6123
2568768 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
4. 8L-8413 [1] STRAP-CABLE (WHITE)  
5. 101-0003 [26] FASTENER  
6. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
7. 164-1234 [1] PLATE  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
9. 186-5107 [2] SCREW-DRIVE (NO 8-16X1.25-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 192-7760 [1] SHAFT  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
  2K-4973 [1] LOCKNUT (3/8-16-THD)  
17. 192-7795 [1] BOOT  
18. 192-7805 [1] HARNESS AS-VALVE (SEAT AIR COMPRESSOR)  
19. 192-7810 [1] SPRING AS-AIR  
  163-1135 [1] SPRING  
  5P-4423 [1] ELBOW  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 192-7822 [1] SHAFT  
23. 237-3943 [1] BRACKET  
24. 237-3970 Y [1] AIR COMPRESSOR GP-SEAT  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 5P-6010 D TUBE (0.26-M)  
29A. 5P-6010 D TUBE (0.36-M)  
30. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
31. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
31A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SEAT)  
    (INCLUDES KNOB ASSEMBLY)
  212-7779 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER,
    BRACKETS, KIT, CABLE AS & KNOB)
  213-5170 [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  211-9294 [1] KIT-TETHER (SEAT)  
    (INCLUDES TETHER)
  212-7783 H [1] KIT-PULLEY  
    (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING)
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  H   KIT MARKED H SERVICES 212-7779 KIT-SHOCK ABSORBER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP61231114
 

256-8768: SUSPENSION GP-SEAT

256-8768 SUSPENSION GP-SEAT -AIR
S/N R9H1-UP
24-VOLT
PART OF 238-6683, 421-1234 SEAT GP-SUSPENSION
AN ATTACHMENT
i05353971 SEBP6123
2568768 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
5. 101-0003 [26] FASTENER  
6. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
7. 164-1234 [1] PLATE  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 C [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 433-5754 [1] HARNESS AS-WIRING (SEAT AIR COMPRESSOR)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  097-7234 [2] TERMINAL-BLADE (18-GA TO 22-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  1P-0810 B TAPE-ELECTRICAL  
  329-3734 B TAPE-ELECTRICAL  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 C [1] SHAFT (OUTER)  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 5P-6010 D TUBE (0.257-M)  
29A. 5P-6010 D TUBE (0.356-M)  
30. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
31. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
31A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
34. 442-8151 [1] CLIP-CABLE  
35. 3S-2093 [4] STRAP-CABLE  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SEAT)  
    (INCLUDES KNOB ASSEMBLY)
  212-7779 H [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER,
    BRACKETS, KIT, CABLE ASSEMBLY & KNOB)
  211-9294 [1] KIT-TETHER (SEAT)  
    (INCLUDES TETHER)
  213-5170 [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7783 H [1] KIT-PULLEY  
    (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING)
  397-6405 [1] KIT-SEAT AIR COMPRESSOR  
    (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET-MOUNT & HARNESS ASSEMBLIES)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  H   KITS MARKED H SERVICE PART(S) MARKED H
  M   METRIC PART
 

#SEBP61231115
 

248-3164: TANK GP-WINDOW WASHER

248-3164 TANK GP-WINDOW WASHER
S/N R9H1-UP
3 PUMPS
PART OF 233-3138 WIPER & WASHER GP-WINDOW
ALSO AN ATTACHMENT
i02756993 SEBP6123
2483164 TANK GP-WINDOW WASHER Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-5698 [1] GROMMET  
2. 7T-8890 [3] PUMP AS-WASHER (24-VOLT)  
3. 254-0079 [1] TANK-WASHER  
4. 261-3345 [1] CONNECTOR  
5. 267-8715 [7] GROMMET  
6. 321-5236 [4] PLUG  
7. 144-0195 E HOSE (10-CM EACH)  
  E   ORDER BY THE CENTIMETER
 

#SEBP61231116
 

325-9410: TANK GP-WINDOW WASHER

325-9410 TANK GP-WINDOW WASHER
S/N R9H1-UP
PART OF 310-2029 WIPER & WASHER GP-WINDOW
AN ATTACHMENT
i03955215 SEBP6123
3259410 TANK GP-WINDOW WASHER Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-5698 [1] GROMMET  
2. 416-0021 [3] PUMP AS-WASHER (24-VOLT)  
3. 261-3345 [1] CONNECTOR  
4. 267-8715 [3] GROMMET  
5. 321-5236 [3] PLUG  
6. 355-9823 [1] TANK AS-WINDOW WASHER  
 

#SEBP61231117
 

381-2494: TRIM GP-CAB

381-2494 TRIM GP-CAB -HVAC
S/N R9H1-UP
PART OF 379-3679, 386-2107 CAB AR
Type 1
AN ATTACHMENT
i04994949 SEBP6123
3812494 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-2376 [1] WASHER (7X16X0.8-MM THK)  
2. 2V-2015 [1] NUT-SPEED  
3. 172-8591 M [7] NUT-CLIP (M6X1-THD)  
4. 6V-8928 [1] HOOK-COAT  
5. 8Y-6379 [1] KIT-HAMMER (CAB WINDOW)  
    (INCLUDES BRACKET & HAMMER)
6. 8Y-6388 [4] LOUVER AS-VENT  
7. 9U-8263 B [1] COVER  
8. 114-6658 [21] WASHER (6.5X17X1-MM THK)  
9. 144-4107 B [2] FASTENER  
10. 164-8474 [2] LOUVER AS-VENT  
11. 171-4047 [4] LOUVER AS-VENT  
13. 330-3865 [1] PLATE AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
14. 263-2576 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  9R-2672 M [1] BOSS-THREADED (M10X1.5X120-MM)  
  5G-7065 [1] BOSS (M10X1.5-THD)  
15. 274-2392 [1] SCREW-THUMB  
16. 294-1002 [1] PLENUM (LOWER, RH)  
17. 294-1004 [1] PLENUM (LOWER, LH)  
18. 419-7776 [1] COVER AS  
19. 357-2270 [1] COVER AS  
20. 398-8490 [1] COVER AS-PANEL  
  297-4162 [1] FILM-IDENTIFICATION (SWITCH PANEL, UPPER)  
  398-9593 [1] FILM-IDENTIFICATION (SWITCH PANEL, LOWER)  
21. 297-4170 [1] INSULATION  
22. 303-9456 [1] CUP HOLDER  
23. 325-1258 [1] PLENUM (UPPER, RH)  
24. 325-1260 [1] PLENUM (UPPER, LH)  
25. 325-9407 [1] FILM-IDENTIFICATION (WRITE DATA)  
26. 343-6499 [1] COVER AS (RH)  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
27. 343-6500 [1] COVER AS (LH)  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
28. 361-3114 [1] PLATE AS  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
29. 357-2261 [1] SUPPORT AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
30. 361-0428 [1] PANEL (RH)  
31. 361-0429 [1] PANEL (LH)  
34. 104-2091 [16] SCREW-FLAT HEAD (6-20X0.5-IN)  
35. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
37. 195-0936 M [6] INSERT-THREADED (M6X1-THD)  
38. 3E-8020 M [8] SCREW-TRUSS HEAD (M6X1X25-MM)  
39. 9X-2038 [9] WASHER (7X19X2-MM THK)  
40. 6K-3273 [1] RIVET-POP  
41. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
42. 6V-8212 M [4] BOLT (M10X1.5X16-MM)  
43. 7G-4824 [1] STRAP  
44. 8C-9660 [6] WASHER (4.6X7.9X0.8-MM THK)  
45. 8E-7791 [1] STRAP  
46. 8R-3695 [1] GROMMET  
47. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
49. 9N-1995 [3] RIVET-POP  
50. 9X-2043 M [7] SCREW-TRUSS HEAD (M6X1X14-MM)  
51. 9X-2044 M [14] SCREW-TRUSS HEAD (M6X1X16-MM)  
52. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
53. 5P-5927 D SEAL (0.9-M)  
54. 8T-6936 D SEAL (4.5-M EACH)  
55. 373-4446 [1] PLUG  
56. 2V-3726 [1] BUMPER  
57. 1R-0622 B [6] PLUG-BUTTON  
58. 193-5916 [4] PLUG  
59. 162-2165 M [1] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
60. 096-6166 [1] WASHER-HARD (4.5X9X1-MM THK)  
61. 8D-6542 [1] GROMMET  
62. 7X-0579 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP61231118
 

381-2494: TRIM GP-CAB

381-2494 TRIM GP-CAB -HVAC
S/N R9H1-UP
PART OF 389-5970 CAB AR
Type 2
AN ATTACHMENT
i06278376 SEBP6123
3812494 TRIM GP-CAB Parts scheme 3812494 TRIM GP-CAB Parts scheme 3812494 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0622 B [6] PLUG-BUTTON  
2. 6V-8928 [1] HOOK-COAT  
3. 8Y-6379 [1] KIT-HAMMER (CAB WINDOW)  
    (INCLUDES BRACKET & HAMMER)
4. 8Y-6388 [4] LOUVER AS-VENT  
5. 9U-8263 B [1] COVER  
6. 144-4107 B [2] FASTENER  
7. 164-8474 [2] LOUVER AS-VENT  
8. 171-4047 [4] LOUVER AS-VENT  
9. 214-9186 C [5] BUTTON  
10. 228-6089 C [1] PLUG (ROCKER SWITCH)  
11. 274-2392 [1] SCREW-THUMB  
12. 294-1002 [1] PLENUM (LOWER, RH)  
13. 294-1004 [1] PLENUM (LOWER, LH)  
14. 297-4170 [1] INSULATION  
15. 303-9456 [1] CUP HOLDER  
16. 325-1258 [1] PLENUM (UPPER, RH)  
17. 325-1260 [1] PLENUM (UPPER, LH)  
18. 325-9407 [1] FILM-IDENTIFICATION (WRITE DATA)  
19. 330-3865 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
  419-3214 [6] BOSS  
20. 334-6090 C [6] STUD  
21. 343-6499 [1] COVER AS (RH)  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
22. 343-6500 [1] COVER AS (LH)  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
23. 357-2261 [1] SUPPORT AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
24. 357-2270 [1] COVER AS  
25. 361-0429 [1] PANEL (LH)  
26. 368-8072 C [1] PANEL (RH)  
27. 373-4446 [1] PLUG  
28. 398-8490 [1] COVER AS-PANEL  
  [1] PANEL-COVER  
  297-4162 [1] FILM-IDENTIFICATION (SWITCH PANEL, UPPER)  
  398-9593 [1] FILM-IDENTIFICATION (SWITCH PANEL, LOWER)  
29. 417-6775 C [1] TRAY  
30. 419-7776 [1] COVER AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
31. 419-8564 C [2] STRAP  
32. 436-7082 C [1] TRAY  
33. 437-8991 C [1] NET AS (STORAGE)  
34. 438-8077 C [1] BIN-STORAGE  
35. 438-8078 C [1] BIN-STORAGE  
36. 439-9973 C [6] CLIP  
37. 441-7480 C [1] PLATE AS  
  9R-2672 M [1] BOSS-THREADED (M10X1.5X120-MM)  
  9R-2821 M [1] BOSS (M10X1.5X15-MM)  
38. 443-6429 C [1] FLOOR MAT AS  
39. C [2] TUBE AS  
40. 448-3613 C [1] STRAP  
41. 463-6185 C [1] LINER  
42. 463-6186 C [1] LINER  
43. 096-6166 [1] WASHER-HARD (4.5X9X1-MM THK)  
44. 104-2091 [16] SCREW-FLAT HEAD (6-20X0.5-IN)  
45. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
46. 232-1473 C [15] WASHER (6X18X1-MM THK)  
47. 162-2165 M [1] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
48. 195-0936 M [6] INSERT-THREADED (M6X1-THD)  
49. 212-6891 C [6] RETAINER  
50. 4I-3069 [1] WASHER-HARD (7X15.5X0.8-MM THK)  
51. 2V-2015 [1] NUT-SPEED  
52. 2V-3726 [1] BUMPER  
53. 3E-8020 M [8] SCREW-TRUSS HEAD (M6X1X25-MM)  
54. 172-8591 M [7] NUT-CLIP (M6X1-THD)  
55. 6K-3273 [4] RIVET-POP  
57. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
58. 7X-0579 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
59. 8C-9660 [6] WASHER (4.6X7.9X0.8-MM THK)  
60. 8R-3695 [1] GROMMET  
61. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
62. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
64. 9X-2038 C [11] WASHER (7X19X2-MM THK)  
65. 9X-2043 CM [9] SCREW-TRUSS HEAD (M6X1X14-MM)  
66. 9X-2044 CM [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
67. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
68. 5P-5927 D SEAL (0.9-M)  
69. 8T-6936 D SEAL (4.5-M EACH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP61231119
 

472-3545: TRIM GP-CAB

472-3545 TRIM GP-CAB
S/N R9H1-UP
PART OF 379-3679, 386-2107 CAB AR
AN ATTACHMENT
i06554037 SEBP6123
4723545 TRIM GP-CAB Parts scheme 4723545 TRIM GP-CAB Parts scheme 4723545 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your 16M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0622 B [6] PLUG-BUTTON  
2. 6V-8928 [1] HOOK-COAT  
3. 8Y-6379 [1] KIT-HAMMER (CAB WINDOW)  
    (INCLUDES BRACKET & HAMMER)
4. 422-2152 [4] LOUVER AS-VENT  
5. 9U-8263 B [1] COVER  
6. 144-4107 B [2] FASTENER  
7. 164-8474 [2] LOUVER AS-VENT  
8. 171-4047 [4] LOUVER AS-VENT  
9. 214-9186 [5] BUTTON  
10. 228-6089 [1] PLUG (ROCKER SWITCH)  
11. 274-2392 [1] SCREW-THUMB  
12. 294-1002 [1] PLENUM (LOWER, RH)  
13. 294-1004 [1] PLENUM (LOWER, LH)  
14. 297-4170 [1] INSULATION  
15. 303-9456 [1] CUP HOLDER  
16. 325-1258 [1] PLENUM (UPPER, RH)  
17. 325-1260 [1] PLENUM (UPPER, LH)  
18. 325-9407 [1] FILM-IDENTIFICATION (WRITE DATA)  
19. 330-3865 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
  419-3214 [6] BOSS  
20. 334-6090 [6] STUD  
21. 343-6499 [1] COVER AS (RH)  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
22. 343-6500 [1] COVER AS (LH)  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
23. 357-2261 [1] SUPPORT AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
24. 357-2270 [1] COVER AS  
25. 361-0429 [1] PANEL (LH)  
26. 368-8072 [1] PANEL (RH)  
27. 373-4446 B [1] PLUG  
28. 398-8490 [1] COVER AS-PANEL  
  297-4162 [1] FILM-IDENTIFICATION (SWITCH PANEL, UPPER)(SWITCH PANEL)  
  398-9593 [1] FILM-IDENTIFICATION (SWITCH PANEL, LOWER)  
29. 417-6775 [1] TRAY  
30. 419-7776 [1] COVER AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
31. 419-8564 [2] STRAP  
32. 436-7082 [1] TRAY  
33. 437-8991 [1] NET AS (STORAGE)  
34. 438-8077 [1] BIN-STORAGE  
35. 438-8078 [1] BIN-STORAGE  
36. 439-9973 [6] CLIP  
37. 441-7480 [1] PLATE AS  
  9R-2672 M [1] BOSS-THREADED (M10X1.5X120-MM)  
  9R-2821 M [1] BOSS (M10X1.5X15-MM)  
38. 443-6428 [1] FLOOR MAT AS  
39. 445-0466 [2] INSERT  
40. 448-3613 [1] STRAP  
41. 463-6185 [1] LINER  
42. 463-6186 [1] LINER  
43. 096-6166 [1] WASHER-HARD (4.5X9X1-MM THK)  
44. 104-2091 [16] SCREW-FLAT HEAD (6-20X0.5-IN)  
45. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
46. 114-6658 [13] WASHER (6.5X17X1-MM THK)  
47. 162-2165 M [1] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
48. 195-0936 M [6] INSERT-THREADED (M6X1-THD)  
49. 212-6891 [6] RETAINER  
50. 2R-2376 [1] WASHER (7X16X0.8-MM THK)  
51. 2V-2015 [1] NUT-SPEED  
52. 2V-3726 B [1] BUMPER  
53. 3E-8020 M [8] SCREW-TRUSS HEAD (M6X1X25-MM)  
54. 172-8591 M [7] NUT-CLIP (M6X1-THD)  
55. 6K-3273 [1] RIVET-POP  
56. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
57. 6V-8212 M [4] BOLT (M10X1.5X16-MM)  
58. 7X-0579 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
59. 8C-9660 [6] WASHER (4.6X7.9X0.8-MM THK)  
60. 8R-3695 B [1] GROMMET  
61. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
62. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
63. 9N-1995 [3] RIVET-POP  
64. 9X-2038 [11] WASHER (7X19X2-MM THK)  
65. 9X-2043 M [9] SCREW-TRUSS HEAD (M6X1X14-MM)  
66. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
67. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
68. 5P-5927 D SEAL (0.9-M)  
69. 8T-6936 D SEAL (0.5-M EACH)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 16M :

SUPPORT GP-CONTROL
233-3225 SUPPORT GP-CONTROL
SUPPORT GP-CONTROL
233-3224 SUPPORT GP-CONTROL
SEAT GP-SUSPENSION
421-1234 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
238-6683 SEAT GP-SUSPENSION
SEAT GP
489-6480 SEAT GP
SEAT GP
244-5002 SEAT GP
SEAT GP
244-5001 SEAT GP
SEAT BELT GP
222-0345 SEAT BELT GP
SUPPORT GP-CONTROL
345-1271 SUPPORT GP-CONTROL
SUPPORT GP-CONTROL
345-1272 SUPPORT GP-CONTROL
SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT
TANK GP-WINDOW WASHER
248-3164 TANK GP-WINDOW WASHER
TANK GP-WINDOW WASHER
325-9410 TANK GP-WINDOW WASHER
TRIM GP-CAB
381-2494 TRIM GP-CAB
TRIM GP-CAB
381-2494 TRIM GP-CAB
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.