355-1118 LINES GP-EXHAUST S/N BDN1-UP PROVIDES 90 DEGREE TURBOCHARGER EXHAUST DIFFUSER WITH 5-INCH BALL JOINT CONNECTION AN ATTACHMENT C18

355-1118 LINES GP-EXHAUST
S/N BDN1-UP
PROVIDES 90 DEGREE TURBOCHARGER EXHAUST DIFFUSER WITH 5-INCH BALL JOINT CONNECTION
AN ATTACHMENT

i04183484 SEBP6158

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name	Comments
1.	284-0671	[1]	CLAMP-BAND
2.	379-2096	[1]	DIFFUSER

#SEBP61580551

360-0767: LINES GP-EXHAUST

360-0767 LINES GP-EXHAUST
S/N BDN1-UP
PROVIDES A FIVE INCH FLEXPIPE KIT FOR TIER 4 C18 750 HP OR GREATER ENGINE
FOR USE WITH 336-5082 EXHAUST MODULE ARRANGEMENT
CANNOT BE USED WITH LESS THAN 750 HP ENGINE
AN ATTACHMENT

i04140510 SEBP6158

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	346-0335	[3]	CLAMP-BAND
2.	354-6789	[3]	BELLOWS AS
			(EACH INCLUDES)
2A.	343-0596	[1]	CLAMP-BAND
	034-1432	[2]	STRAP-CABLE

#SEBP61580552

434-3309: LINES GP-EXHAUST

434-3309 LINES GP-EXHAUST
S/N BDN1-UP
AN ATTACHMENT

i05442081 SEBP6158

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	346-0335	[4]	CLAMP-BAND
2.	351-0802	[1]	ADAPTER
3.	354-6789	[2]	BELLOWS AS
			(EACH INCLUDES)
	034-1432	[2]	STRAP-CABLE
	343-0596	[1]	CLAMP-BAND
4.	384-5176	[2]	ADAPTER
5.	420-9315	[1]	TUBE-EXHAUST

#SEBP61580553

454-8507: LINES GP-EXHAUST

454-8507 LINES GP-EXHAUST
S/N BDN1-UP
AN ATTACHMENT

i05967055 SEBP6158

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

LINES GP-EXHAUST COMBUSTION

Pos.	Part No	Qty	Parts name	Comments
1.	454-8506	[1]	DIFFUSER
2.	1W-2431	[1]	CLAMP-BAND

#SEBP61580554

346-3336: LINES GP-EXHAUST COMBUSTION

346-3336 LINES GP-EXHAUST COMBUSTION
S/N PDC1-UP; BDN1-UP
PART OF 346-0139, 346-0141, 346-0142, 346-0144, 346-0151, 362-8743, 362-8744, 362-8766, 362-8769, 362-8771, 362-8774, 362-8775, 362-8776, 362-8778 MODULE AR-CLEAN EMISSIONS
AN ATTACHMENT

i04036969 SEBP6158

3463336 LINES GP-EXHAUST COMBUSTION Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	288-8580	[16]	CLAMP-FUEL LINE
2.	333-7564	[1]	BRACKET
3.	343-0882	[1]	HOSE AS
4.	353-7061	[1]	HOSE AS
5.	355-2472	[1]	HOSE AS
6.	353-7062	[1]	HOSE AS
7.	343-4267	[1]	BRACKET AS
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
8.	344-1198	[2]	BOLT (M6X1X45-MM)
9.	311-8366	[3]	WASHER-HARD (8.8X16X2-MM THK)
10.	344-1200	[12]	WASHER-HARD (6.6X12X2-MM THK)
11.	344-2463	[1]	BRACKET AS
12.	344-5673 M	[2]	NUT (M6X1-THD)
13.	186-0815 M	[3]	BOLT (M6X1X20-MM)
14.	344-1192 M	[2]	BOLT (M8X1.25X20-MM)
15.	344-1207	[6]	BOLT (M6X1X30-MM)
16.	344-5674 M	[2]	NUT (M8X1.25-THD)
17.	3J-7352	[2]	CONNECTOR
18.	6V-9027	[6]	SEAL-O-RING
19.	5M-5926	[4]	CLAMP
20.	9S-8002	[4]	PLUG (7/16-20-THD)
21.	214-1048	[2]	SPACER (8.8X16X4-MM THK)
	M		METRIC PART

#SEBP61580555

352-6035: LINES GP-TURBOCHARGER

352-6035 LINES GP-TURBOCHARGER
S/N BDN1-2299
FOR USE WITH MIXER ORIENTATION WITH INLET UP, TURBO WITH EXHAUST REAR AND BALANCE VALVE ACTUATOR WITH , PORT IN THE SIDE OF THE CANISTER AND POINTING DOWNWARDS AND TOWARDS THE ENGINE
AN ATTACHMENT

i04422231 SEBP6158

3526035 LINES GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	290-1993	[3]	STRAP-CABLE
2.	317-7012	[2]	CLAMP-BAND
3.	343-8121	[1]	CONNECTOR AS
	3J-7352	[1]	CONNECTOR
	214-7566	[1]	SEAL-O-RING
4.	364-9624 C	[1]	ELBOW AS
	214-7567	[1]	SEAL-O-RING
	364-9623	[1]	ADAPTER-ELBOW
5.	364-9630 C	[1]	CONNECTOR AS
		[1]	ANGLE
	364-9629	[1]	CONNECTOR
6.	365-9642 C	[1]	TUBE AS
7.	365-9643 C	[1]	TUBE AS
8.	365-9660 C	[1]	HOSE AS
9.	0S-1618	[1]	BOLT (5/16-18X1-IN)
10.	281-5837 C	[1]	FITTING-ELBOW
11.	2H-3755	[2]	BOLT (5/16-18X0.43-IN)
12.	363-0253	[3]	CLIP (TAB)
13.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
14.	337-4178 CE		HOSE (34-CM)
15.	330-4374 CE		SLEEVE (44-CM)
16.	363-0254	[3]	CLIP (SLOT)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER

#SEBP61580556

352-6035: LINES GP-TURBOCHARGER

352-6035 LINES GP-TURBOCHARGER
S/N BDN2300-UP
FOR USE WITH MIXER ORIENTATION WITH INLET UP, TURBO WITH EXHAUST REAR AND BALANCE VALVE ACTUATOR WITH , PORT IN THE SIDE OF THE CANISTER AND POINTING DOWNWARDS AND TOWARDS THE ENGINE
AN ATTACHMENT

i06575236 SEBP6158

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	290-1993	[3]	STRAP-CABLE
2.	317-7012	[2]	CLAMP-BAND
3.	343-8121	[1]	CONNECTOR AS
	3J-7352	[1]	CONNECTOR
	214-7566	[1]	SEAL-O-RING
4.	364-9624	[1]	ELBOW AS
	214-7567	[1]	SEAL-O-RING
	364-9623	[1]	ADAPTER-ELBOW
5.	364-9630	[1]	CONNECTOR AS
	238-5080	[1]	SEAL-O-RING
	364-9629	[1]	CONNECTOR
6.	365-9642	[1]	TUBE AS
7.	365-9643	[1]	TUBE AS
8.	464-1127 C	[1]	TUBE AS
9.	0S-1618	[1]	BOLT (5/16-18X1-IN)
10.	281-5837	[1]	FITTING-ELBOW
11.	2H-3755	[2]	BOLT (5/16-18X0.43-IN)
12.	363-0253	[3]	CLIP (TAB)
13.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
14.	337-4178 E		HOSE (34-CM)
15.	330-4374 E		SLEEVE (44-CM)
16.	363-0254	[3]	CLIP (SLOT)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER

#SEBP61580557

353-9864: LINES GP-TURBOCHARGER

353-9864 LINES GP-TURBOCHARGER
S/N BDN1-UP
PROVIDES BALANCE VALVE LINES GP TO CREATE PRESSURE REFERENCE CIRCUIT FROM MIXER THROUGH BALANCE VALVE SOLENOID
FOR USE WITH MIXER ORIENTATION WITH INLET DOWN AND TURBO REAR EXHAUST
AN ATTACHMENT

i04401587 SEBP6158

3539864 LINES GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	290-1993	[3]	STRAP-CABLE
2.	317-7012	[2]	CLAMP-BAND
3.	364-9624	[1]	ELBOW AS
	214-7567	[1]	SEAL-O-RING
	364-9623	[1]	ADAPTER-ELBOW
4.	364-9630	[1]	CONNECTOR AS
	238-5080	[1]	SEAL-O-RING
	364-9629	[1]	CONNECTOR
5.	365-0592	[1]	CONNECTOR AS
	214-7566	[1]	SEAL-O-RING
	364-9633	[1]	CONNECTOR
6.	365-9642	[1]	TUBE AS
7.	365-9643	[1]	TUBE AS
8.	365-9659	[1]	HOSE AS
9.	0S-1618	[1]	BOLT (5/16-18X1-IN)
10.	281-5837	[1]	FITTING-ELBOW
11.	2H-3755	[2]	BOLT (5/16-18X0.43-IN)
12.	345-3350	[3]	CLIP
13.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
14.	337-4178 E		HOSE (34-CM)
15.	330-4374 E		SLEEVE (44-CM)
	E		ORDER BY THE CENTIMETER

#SEBP61580558

353-9864: LINES GP-TURBOCHARGER

353-9864 LINES GP-TURBOCHARGER
S/N PDC1-UP; BDN1-UP
PROVIDES BALANCE VALVE LINES GP TO CREATE PRESSURE REFERENCE CIRCUIT FROM MIXER THROUGH BALANCE VALVE SOLENOID
PART OF 389-1451 ENGINE AR-COMPLETE
FOR USE WITH MIXER ORIENTATION WITH INLET DOWN AND TURBO REAR EXHAUST
AN ATTACHMENT

i05962876 SEBP6158

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	290-1993	[3]	STRAP-CABLE
2.	317-7012	[2]	CLAMP-BAND
3.	364-9624	[1]	ELBOW AS
	214-7567	[1]	SEAL-O-RING
	364-9623	[1]	ADAPTER-ELBOW
4.	364-9630	[1]	CONNECTOR AS
	238-5080	[1]	SEAL-O-RING
	364-9629	[1]	CONNECTOR
5.	365-0592	[1]	CONNECTOR AS
	214-7566	[1]	SEAL-O-RING
	364-9633	[1]	CONNECTOR
6.	365-9642	[1]	TUBE AS
7.	365-9643	[1]	TUBE AS
8.	463-8240 C	[1]	TUBE AS
9.	0S-1618	[1]	BOLT (5/16-18X1-IN)
10.	281-5837	[1]	FITTING-ELBOW
11.	2H-3755	[2]	BOLT (5/16-18X0.43-IN)
12.	363-0253 C	[3]	CLIP (TAB)
13.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
14.	337-4178 E		HOSE (34-CM)
15.	330-4374 E		SLEEVE (44-CM)
16.	363-0254 C	[3]	CLIP (SLOT)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER

#SEBP61580559

353-9865: LINES GP-TURBOCHARGER

353-9865 LINES GP-TURBOCHARGER
S/N BDN1-UP
PROVIDES BALANCE VALVE ROUTING FROM MIXER THROUGH BALANCE VALVE SOLENOID TO BALANCE VALVE ACTUATOR
Type 1
FOR USE WITH MIXER WITH INLET UP & TURBO WITH EXHAUST FORWARD AND THE BALANCE VALVE PORT FACING, DOWNWARDS AND TOWARDS THE ENGINE
CANNOT BE USED WITH OIL FILLER WITH CHAIN ON MIDDLE OR REAR VALVE COVER
AN ATTACHMENT

i04542337 SEBP6158

3539865 LINES GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE: