AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

395-3227 BASE GP-VALVE COVER & INJ HARN S/N MJE1-UP FOR USE WITH COMPRESSION BRAKES C27 GENERATOR SET


BASIC ENGINE
VALVE MECHANISM GP
CAMSHAFT GP
CYLINDER BLOCK GP
HOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

GENERATOR SET C27 GENERATOR SET RJA
 C27 Generator Set RJA00001-UP SEBP6166 C27 RJA   (2013)

BASIC ENGINE

VALVE MECHANISM GP
BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
BASE GP-VALVE COVER & INJ HARN
395-3227 BASE GP-VALVE COVER & INJ HARN
COVER GP-VALVE MECHANISM
373-6589 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
464-0324 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
464-0324 COVER GP-VALVE MECHANISM
 

#SEBP61660010
 

395-3227: BASE GP-VALVE COVER & INJ HARN

395-3227 BASE GP-VALVE COVER & INJ HARN
S/N MJE1-UP
FOR USE WITH COMPRESSION BRAKES
i04999634 SEBP6166
3953227 BASE GP-VALVE COVER & INJ HARN Parts scheme
  For full view, you need register

Parts for your C27 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-6508 [12] CAP AS  
2. 226-4927 Y [2] BASE GP-VALVE COVER & INJ HARN  
3. 1A-9579 [24] BOLT (5/16-18X1.5-IN)  
4. 237-3759 [8] STUD (5/16-18X2.36-IN)  
5. 9M-1974 [32] WASHER-HARD (8.8X16X2-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP61660011
 

260-9307: CAMSHAFT GP

260-9307 CAMSHAFT GP
S/N MJE1-UP
i05338510 SEBP6166
2609307 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your C27 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 421-0049 [1] CAMSHAFT (RIGHT BANK)  
2. 421-0071 J [1] CAMSHAFT (LEFT BANK)  
  J   END MARKED "F" ON FRONT END OF ENGINE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP61660012
 

393-1537: COVER GP-CYLINDER BLOCK

393-1537 COVER GP-CYLINDER BLOCK
S/N MJE1-UP
PART OF 349-5619 ENGINE AR-COMPLETE
i04938896 SEBP6166
3931537 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your C27 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2772 [1] COVER  
2. 4N-1683 [1] COVER  
3. 239-5571 [1] SEAL-INTEGRAL  
4. 343-8888 [1] GASKET  
5. 391-5624 [1] COVER  
6. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
7. 0S-1591 [6] BOLT (3/8-16X1.5-IN)  
8. 0S-1594 [5] BOLT (3/8-16X1-IN)  
9. 234-8937 [1] SEAL-INTEGRAL  
10. 239-5572 [1] SEAL-INTEGRAL  
11. 4N-0794 [1] COVER  
12. 5M-2894 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 7M-8485 [1] SEAL-O-RING  
14. 9S-4181 [1] PLUG (1-5/16-12-THD)  
 

#SEBP61660013
 

238-9863: COVER GP-FRONT HOUSING

238-9863 COVER GP-FRONT HOUSING
S/N MJE1-UP
PART OF 349-5619 ENGINE AR-COMPLETE
FOR USE WITH DRY NARROW ENGINE
i04938914 SEBP6166
2389863 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your C27 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7820 [1] COVER-ACCESSORY DRIVE  
2. 234-3441 [2] SUPPORT-HOUSING (LH)  
3. 239-1139 [2] SEAL  
4. 274-4051 [2] COVER-CAMSHAFT  
5. 125-9794 [1] SEAL-O-RING  
6. 0S-1590 [4] BOLT (3/8-16X2-IN)  
7. 0S-1594 [3] BOLT (3/8-16X1-IN)  
8. 0T-0573 [4] BOLT (3/8-16X2.75-IN)  
9. 2M-1538 [1] STUD-TAPERLOCK (3/8-16X1.6-IN)  
10. 2P-1974 [3] STUD-TAPERLOCK (3/8-16X4.2-IN)  
11. 3K-3256 [1] STUD-TAPERLOCK (3/8-16X1.7-IN)  
12. 5F-4899 [2] BOLT (3/8-16X5.5-IN)  
13. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 9S-8752 [6] NUT-FULL (3/8-16-THD)  
15. 9X-6458 [14] WASHER-HARD (10.2X22.5X3-MM THK)  
 

#SEBP61660014
 

373-6589: COVER GP-VALVE MECHANISM

373-6589 COVER GP-VALVE MECHANISM
S/N MJE1-UP
PART OF 349-5619 ENGINE AR-COMPLETE
i05195756 SEBP6166
3736589 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your C27 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-3027 [2] BREATHER AS (CRANKCASE)  
2. 4W-3034 [2] CLAMP-HOSE  
3. 126-0559 [4] BOLT (5/16-18X1.25-IN)  
4. 224-7506 [6] SEAL-VALVE COVER (CRANKCASE)  
5. 345-2009 [4] COVER  
6. 345-2010 [2] COVER  
7. 345-2011 [2] ELBOW  
8. 033-6031 [2] SEAL-O-RING  
9. 212-7728 [36] ISOLATOR AS  
10. 5P-8211 [2] SEAL-O-RING  
11. 7X-0440 [34] BOLT (5/16-18X1.75-IN)  
12. 8T-4224 [36] WASHER-HARD (8.8X16X2-MM THK)  
13. 394-1321 [2] STUD (5/16-18-THD)  
 

#SEBP61660015
 

464-0324: COVER GP-VALVE MECHANISM

464-0324 COVER GP-VALVE MECHANISM
S/N MJE1-UP
PART OF 349-5619 ENGINE AR-COMPLETE
Type 1
i06258699 SEBP6166
4640324 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your C27 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-3027 [2] BREATHER AS (CRANKCASE)  
2. 4W-3034 [2] CLAMP-HOSE  
3. 126-0559 [4] BOLT (5/16-18X1.25-IN)  
4. 345-2011 [2] ELBOW  
5. 448-3693 [4] COVER-VALVE MECHANISM  
6. 448-3694 [2] COVER AS-VALVE MECHANISM  
7. 449-9059 [6] SEAL  
8. 033-6031 [2] SEAL-O-RING  
9. 394-1321 [2] STUD (5/16-18-THD)  
10. 4P-8525 [36] SPACER (9X16X30-MM THK)  
11. 5P-8211 [2] SEAL-O-RING  
12. 7X-0440 [34] BOLT (5/16-18X1.75-IN)  
 

#SEBP61660016
 

464-0324: COVER GP-VALVE MECHANISM

464-0324 COVER GP-VALVE MECHANISM
S/N MJE1-UP
PART OF 349-5619 ENGINE AR-COMPLETE
Type 2
i06818550 SEBP6166
4640324 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your C27 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-3027 [2] BREATHER AS (CRANKCASE)  
2. 4W-3034 [2] CLAMP-HOSE  
3. 126-0559 C [8] BOLT (5/16-18X1.25-IN)  
4. 481-3211 C [2] ELBOW  
5. 491-4030 [4] COVER  
6. 492-1760 C [2] COVER AS  
7. 449-9059 [6] SEAL  
8. 033-6031 [2] SEAL-O-RING  
9. 394-1321 [2] STUD (5/16-18-THD)  
10. 4P-8525 [36] SPACER (9X16X30-MM THK)  
11. 061-9457 C [2] SEAL-O-RING  
12. 7X-0440 [34] BOLT (5/16-18X1.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP61660017
 

225-6052: CRANKSHAFT GP

225-6052 CRANKSHAFT GP
S/N MJE1-UP
i03879448 SEBP6166
2256052 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your C27 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 253-1752 J [2] PLATE-THRUST  
2. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)(FRONT)  
3. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
4. 384-9907 [1] CRANKSHAFT AS  
4A. 4N-0684 [1] DOWEL  
4B. 7S-5005 [1] DOWEL  
4C. 223-9135 [1] GEAR-CRANKSHAFT (99-TEETH)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (KIT INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP61660018
 

348-9904: CYLINDER BLOCK AS

348-9904 CYLINDER BLOCK AS
S/N MJE1-UP
PART OF 348-9905 CYLINDER BLOCK AS
i03801470 SEBP6166
3489904 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your C27 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
2. 225-5966 [1] SLEEVE  
3. 232-7607 [7] CAP-CRANKSHAFT  
4. 365-4307 [14] BOLT-12 POINT HEAD (M11X1.25X50-MM)  
5. 341-0087 [2] PLUG AS  
    (EACH INCLUDES)
  6V-6609 [1] SEAL-O-RING  
  9S-4185 [1] PLUG (3/4-16-THD)  
6. 4N-0685 [1] BUSHING (1-IN WIDE)  
7. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
9. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
 

#SEBP61660019
 

348-9905: CYLINDER BLOCK AS

348-9905 CYLINDER BLOCK AS
S/N MJE1-UP
PART OF 349-2528 CYLINDER BLOCK GP
i03889632 SEBP6166
3489905 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your C27 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5854 [12] BAND-FILLER (130.2-MM ID)  
2. 110-2220 [12] SEAL-LINER  
3. 142-6217 [12] SEAL-O-RING  
4. 142-7072 [12] SEAL-LINER  
5. 197-9322 [12] LINER-CYLINDER BLOCK  
6. 348-9904 Y [1] CYLINDER BLOCK AS  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New Bolt Is Now Used to Secure the Rocker Arm Shaft on Certain C27 and C32 Engines {1102, 1123, 1292, 7553}
2010/12/13
New Rocker Arms Are Used on C27 and C32 Commercial Engines {1123}
2014/05/07
Correct Valve Rocker Arm Usage on C27 and C32 Engines {1123}
2015/09/04
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Special Instruction
Improved Camshafts, Rocker Arm Assemblies, and High-Pressure Oil Pumps Are Now Used on C27 and C32 Machine Engines {1123, 1210, 1304, 1315}
Improved Camshafts, Rocker Arm Assemblies, and High-Pressure Oil Pumps Are Now Used on C27 and C32 Machine Engines {1123, 1210, 1304, 1315}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Service Magazine
An Improved Rocker Arm Assembly Is Used on C27 and C32 Machine Engines {1102, 1123}
2014/05/30
Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2014/05/30
New Rocker Arms Are Used for Certain C27 and C32 Machine Engines {1102, 1123}
2014/05/30
New Guidelines for Valve Cover Base Threaded Insert on C27 and C32 Engines {1107, 1120}
2014/10/27
Correct Valve Rocker Arm Usage on C27 and C32 Machine Engines {1123}
2015/09/03
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}

Caterpillar Parts SIS Catalog C27 :

BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
BASE GP-VALVE COVER & INJ HARN
223-6408 BASE GP-VALVE COVER & INJ HARN
350-3111 GENERAL AR
350-3110 GENERAL AR
385-9397 ENGINE AR-CORE
385-9396 ENGINE AR-CORE
349-5622 ENGINE AR-COMPLETE
CAMSHAFT GP
260-9307 CAMSHAFT GP
COVER GP-CYLINDER BLOCK
393-1537 COVER GP-CYLINDER BLOCK
COVER GP-FRONT HOUSING
238-9863 COVER GP-FRONT HOUSING
COVER GP-VALVE MECHANISM
373-6589 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
464-0324 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
464-0324 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
225-6052 CRANKSHAFT GP
CYLINDER BLOCK AS
348-9904 CYLINDER BLOCK AS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.