250-5861 CYLINDER GP-BULLDOZER LIFT S/N T5X1-UP 114.3-MM (4.5-IN) STROKE X 1425-MM (56.1-IN) STROKE PART OF 384-7257, 384-7258 CYLINDER & LINES GP-LIFT D8R



HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D8R TRACK-TYPE TRACTOR T5X
 D8R TRACK-TYPE TRACTOR T5X00001-UP (MACHINE) POWERED BY 3406C Engine SEBP6188 D8R T5X   (2014)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & LINES GP-LIFT
384-7257 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
384-7258 CYLINDER & LINES GP-LIFT
CYLINDER GP-BULLDOZER LIFT
250-5861 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-DUAL TILT
347-3272 CYLINDER GP-DUAL TILT
CYLINDER GP-RIPPER
155-3653 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER PIN PULLER
6E-3113 CYLINDER GP-RIPPER PIN PULLER
 

#SEBP61880540
 

250-5861: CYLINDER GP-BULLDOZER LIFT

250-5861 CYLINDER GP-BULLDOZER LIFT
S/N T5X1-UP
114.3-MM (4.5-IN) STROKE X 1425-MM (56.1-IN) STROKE
PART OF 384-7257, 384-7258 CYLINDER & LINES GP-LIFT
i05319719 SEBP6188
2505861 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 6E-1109 [1] PISTON AS  
  9X-7269 [1] SEAL AS  
2. 6E-1111 [1] ROD AS  
3. 312-4247 [1] SEAL-WIPER  
4. 238-8637 [1] CYLINDER AS (BULLDOZER LIFT)  
4A. 6E-1108 [2] BUSHING  
5. 106-1017 [1] WASHER (36.7X77X6-MM THK)  
6. 163-6474 [1] HEAD  
7. 312-4248 [1] SEAL AS-BUFFER  
8. 173-9682 M [1] BOLT (M36X4X100-MM)  
9. 175-7902 [1] SEAL-O-RING  
10. 1K-7095 [1] RING-BACKUP  
11. 160-6310 [1] CAP-BEARING  
12. 3G-0911 B [28] SHIM (0.8-MM THK)  
13. 4J-3745 [1] RING-WEAR  
14. 7X-0851 M [4] NUT (M24X3-THD)  
15. 8C-9161 [1] RING-WEAR  
16. 8T-0672 M [4] BOLT (M24X3X160-MM)  
17. 312-4245 [1] SEAL-U-CUP  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP61880541
 

347-3272: CYLINDER GP-DUAL TILT

347-3272 CYLINDER GP-DUAL TILT -BULLDOZER-RH, LH
S/N T5X1-UP
184.15-MM (7.2-IN) BORE X 153.8-MM (6.1-IN) STROKE. BULLDOZER
PART OF 385-5577, 385-5580 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i05325173 SEBP6188
3473272 CYLINDER GP-DUAL TILT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 2J-0564 [1] LOCKNUT (2-12-THD)  
3. 241-0551 [1] CYLINDER AS  
3A. 1U-2182 [2] BUSHING  
4. 241-0552 [1] ROD AS  
4A. 7J-3297 [1] BEARING  
4B. 8T-9044 [1] RING-RETAINING  
5. 347-3271 [1] PISTON GP-HYDRAULIC CYLINDER  
5A. 1J-8569 [1] INSERT-PISTON  
5B. 2H-3932 [1] SEAL-O-RING  
5C. 3K-8692 [2] RING-BACKUP  
5D. 5J-4993 [1] SEAL AS  
  5J-4407 [1] RING-EXPANDER  
  5J-4408 [1] SEAL  
5E. 6E-1443 [1] INSERT  
5F. 347-3274 [1] PLUNGER  
6. 191-3583 [1] HEAD  
7. 311-9316 [1] SEAL AS-BUFFER  
8. 6V-3669 M [8] BOLT (M20X2.5X80-MM)  
9. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
10. 311-9317 [1] SEAL-U-CUP  
11. 1J-2674 [1] RING-WEAR  
12. 1U-1738 [1] RING-BACKUP  
13. 311-9318 [1] SEAL-WIPER  
14. 5P-7593 [1] SEAL-O-RING  
15. 8C-5245 [1] RING-WEAR  
16. 8T-8381 [1] SEAL  
17. 9T-5900 [1] WASHER (51.2X98X4.76-MM THK)  
  M   METRIC PART
 

#SEBP61880542
 

155-3653: CYLINDER GP-RIPPER

155-3653 CYLINDER GP-RIPPER -LIFT
S/N ESA40000-UP; ESM40000-UP; ESN40000-UP; ESS40000-UP
184.2-MM (7.3-IN) BORE X 281.4-MM (11-IN) STROKE
PART OF 385-2711, 385-2712, 385-2715, 385-2716 RIPPER AR, 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i05333161 SEBP6188
1553653 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 2J-7686 [1] LOCKNUT (2.5X12-THD)  
2. 1J-2674 J [1] RING-WEAR  
3. 5J-4993 J [1] SEAL AS  
  5J-4407 [1] RING-EXPANDER  
  5J-4408 [1] SEAL  
4. 1U-2716 [1] PISTON  
5. 6J-9121 [1] WASHER (63.73X107.95X8.74-MM THK)  
6. 155-3850 [1] CYLINDER AS  
6A. 3G-5999 [1] BUSHING  
7. 5P-7593 J [1] SEAL-O-RING  
8. 158-3027 [1] RING-BACKUP  
9. 8T-8381 J [1] SEAL  
10. 155-3849 [1] HEAD  
11. 6V-5845 M [8] BOLT (M20X2.5X70-MM)  
12. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
13. 9T-0584 [1] ROD AS  
13A. 3G-5999 [1] BUSHING  
14. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
15. 8C-3206 [4] FLANGE-HALF  
16. 312-4247 J [1] SEAL-WIPER  
17. 312-4248 J [1] SEAL AS-BUFFER  
18. 312-4245 [1] SEAL-U-CUP  
19. 8T-1714 J [1] RING-WEAR  
20. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
   
    AVAILABLE REPAIR KIT(S):
  244-2067 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP61880543
 

6E-3113: CYLINDER GP-RIPPER PIN PULLER

6E-3113 CYLINDER GP-RIPPER PIN PULLER
S/N T5X1-UP
101.6-MM (4-IN) BORE X 138.5-MM (5.5-IN) STROKE
PART OF 160-3616 PULLER AR-PIN
AN ATTACHMENT
i05333275 SEBP6188
6E3113 CYLINDER GP-RIPPER PIN PULLER Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 173-9779 M [1] BOLT (M24X3X80-MM)  
2. 6J-2797 J [1] RING-WEAR  
3. 5J-5402 J [1] SEAL AS  
4. 9T-3493 [1] PISTON  
5. 6V-8237 [1] WASHER (26X44X4-MM THK)  
6. 4T-6907 J [1] RING-WEAR  
7. 6E-3980 [1] ROD AS  
8. 308-1880 [1] SEAL-WIPER  
9. 167-2300 J [1] SEAL-U-CUP  
10. 167-2190 J [1] SEAL AS-BUFFER  
11. 2K-6830 J [1] RING-BACKUP  
12. 175-7900 J [1] SEAL-O-RING  
13. 6E-4976 [1] HEAD  
14. 6E-3976 [1] CYLINDER AS  
   
    AVAILABLE REPAIR KIT(S):
  240-4819 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP61880544
 

155-3652: CYLINDER GP-RIPPER TIP

155-3652 CYLINDER GP-RIPPER TIP -TILT, LH
S/N ESA40000-UP; ESM40000-UP; ESN40000-UP; ESS40000-UP
165.1-MM (6.5-IN) BORE X 437.6-MM (17.3-IN) STROKE
PART OF 385-2711, 385-2712, 385-2715, 385-2716 RIPPER AR, 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i05333162 SEBP6188
1553652 CYLINDER GP-RIPPER TIP Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 155-3857 [1] CYLINDER AS  
2A. 3G-5999 [1] BUSHING  
3. 1P-4576 [2] FLANGE-HALF  
4. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
6. 1P-4577 [2] FLANGE-HALF  
7. 8T-0666 M [2] BOLT (M24X3X90-MM)  
8. 6V-8133 M [4] BOLT (M24X3X80-MM)  
9. 155-3856 [1] HEAD  
10. 8T-8379 J [1] SEAL-HEAD  
11. 158-3026 [1] RING-BACKUP  
12. 7J-8956 J [1] SEAL-O-RING  
13. 9T-0098 [1] ROD AS  
13A. 3G-5999 [1] BUSHING  
14. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
15. 5J-4991 J [1] SEAL AS  
  5J-4592 [1] SEAL  
  5J-4593 [1] RING-EXPANDER  
16. 3J-9703 [1] RING-WEAR  
17. 6J-9748 [1] PISTON  
18. 2J-0564 [1] LOCKNUT (2-12-THD)  
19. 8T-1714 J [1] RING-WEAR  
20. 312-4248 [1] SEAL AS-BUFFER  
21. 167-2319 [1] SEAL-U-CUP  
22. 312-4247 [1] SEAL-WIPER  
   
    AVAILABLE REPAIR KIT(S):
  244-2050 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP61880545
 

165-0102: CYLINDER GP-RIPPER TIP

165-0102 CYLINDER GP-RIPPER TIP -TILT, RH
S/N ESA40000-UP; ESM40000-UP; ESN40000-UP; ESS40000-UP
165.1-MM (6.5-IN) BORE X 437-MM (17.2-IN) STROKE
PART OF 385-2711, 385-2712, 385-2715, 385-2716 RIPPER AR, 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i05333157 SEBP6188
1650102 CYLINDER GP-RIPPER TIP Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 2J-0564 [1] LOCKNUT (2-12-THD)  
2. 165-0101 [1] CYLINDER AS  
  3G-5999 [1] BUSHING  
3. 1P-4576 [2] FLANGE-HALF  
4. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
6. 1P-4577 [2] FLANGE-HALF  
7. 8T-0666 M [2] BOLT (M24X3X90-MM)  
8. 173-9779 M [4] BOLT (M24X3X80-MM)  
9. 155-3856 [1] HEAD  
10. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
11. 8T-1714 J [1] RING-WEAR  
12. 9T-0096 J [1] RING-WEAR  
13. 9T-0098 [1] ROD AS  
  3G-5999 [1] BUSHING  
14. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
15. 158-3026 [1] RING-BACKUP  
16. 312-4247 J [1] SEAL-WIPER  
17. 6J-9748 [1] PISTON  
18. 312-4248 J [1] SEAL AS-BUFFER  
19. 167-2319 [1] SEAL-U-CUP  
20. 5J-4991 J [1] SEAL AS  
21. 7J-8956 J [1] SEAL-O-RING  
22. 8T-8379 J [1] SEAL-HEAD  
   
    AVAILABLE REPAIR KIT(S):
  244-2050 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP61880546
 

240-7347: CYLINDER GP-TILT

240-7347 CYLINDER GP-TILT -BULLDOZER
S/N T5X1-UP
184.15-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576, 385-5578, 385-5579 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT ORDER @@@@@492-0310@@@@@
AN ATTACHMENT
i05325003 SEBP6188
2407347 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 240-7348 [1] CYLINDER AS  
1A. 1U-2182 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 6E-1183 [1] PISTON  
4. 5P-7593 J [1] SEAL-O-RING  
5. 158-3027 J [1] RING-BACKUP  
6. 191-3583 [1] HEAD  
7. 240-7349 [1] ROD AS  
7A. 7J-3297 [1] BEARING  
7B. 8T-9044 [1] RING-RETAINING  
8. 6V-3669 M [8] BOLT (M20X2.5X80-MM)  
9. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
10. 8T-1790 J [1] SEAL AS  
11. 1J-2674 J [1] RING-WEAR  
12. 225-3286 [1] SEAL-WIPER  
13. 167-2324 [1] SEAL-U-CUP  
14. 167-2211 [1] SEAL AS-BUFFER  
15. 8C-5245 J [1] RING-WEAR  
16. 8T-8381 J [1] SEAL  
17. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  245-6839 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP61880547
 

491-0252: CYLINDER GP-TILT

491-0252 CYLINDER GP-TILT -BULLDOZER
S/N T5X1-UP
184.2-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06790266 SEBP6188
4910252 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1J-2674 [1] RING-WEAR  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
4. 6V-3669 M [8] BOLT (M20X2.5X80-MM)  
5. 8C-5245 [1] RING-WEAR  
6. 8T-1790 [1] SEAL AS  
7. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
8. 8T-8381 [1] SEAL  
9. 158-3027 [1] RING-BACKUP  
10. 191-3583 [1] HEAD  
11. 311-9316 [1] SEAL AS-BUFFER  
12. 311-9317 [1] SEAL-U-CUP  
13. 5P-7593 [1] SEAL-O-RING  
14. 491-0256 [1] ROD AS  
14A. 7J-3297 [1] BEARING  
  8T-9044 [1] RING-RETAINING  
15. 491-0258 [1] PISTON  
16. 492-0309 [1] CYLINDER AS  
16A. 1U-2182 [2] BUSHING  
17. 311-9318 [1] SEAL-WIPER  
  M   METRIC PART
 

#SEBP61880548
 

492-0310: CYLINDER GP-TILT

492-0310 CYLINDER GP-TILT -BULLDOZER
S/N T5X1-UP
184.2-MM (7.2-IN) BORE X 208.4-MM (8.2-IN) STROKE
PART OF 385-5575, 385-5576 INSTALLATION AR-BULLDOZER
FIELD REPLACEMENT ORDER @@@@@491-0252@@@@@
FIELD REPLACEMENT FOR @@@@@240-7347@@@@@
AN ATTACHMENT
i06790224 SEBP6188
4920310 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1J-2674 [1] RING-WEAR  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
4. 5P-7593 [1] SEAL-O-RING  
5. 6E-1183 [1] PISTON  
6. 6V-3669 M [8] BOLT (M20X2.5X80-MM)  
7. 8C-5245 [1] RING-WEAR  
8. 8T-1790 [1] SEAL AS  
9. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
10. 8T-8381 [1] SEAL  
11. 158-3027 [1] RING-BACKUP  
12. 191-3583 [1] HEAD  
  311-9318 [1] SEAL-WIPER  
13. 240-7349 [1] ROD AS  
14. 311-9316 [1] SEAL AS-BUFFER  
15. 311-9317 [1] SEAL-U-CUP  
16. 311-9318 [1] SEAL-WIPER  
17. 492-0309 [1] CYLINDER AS  
17A. 1U-2182 [2] BUSHING  
  M   METRIC PART
 

#SEBP61880549
 

6E-0397: CYLINDER GP-TILT

6E-0397 CYLINDER GP-TILT -ANGLING BULLDOZER
S/N T5X1-UP
184.15-MM (7.2-IN) BORE X 175-MM (6.9-IN) STROKE
PART OF 385-5581 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i05326121 SEBP6188
6E0397 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 6E-0398 [1] CYLINDER AS  
1A. 1U-2182 [2] BUSHING  
2. 2J-0564 [1] LOCKNUT (2-12-THD)  
3. 9T-5900 [1] WASHER (51.2X98X4.76-MM THK)  
4. 274-5527 [1] PISTON AS-CYLINDER  
4A. 5J-4993 [1] SEAL AS  
4B. 8H-3532 [1] SPRING-VALVE  
4C. 9T-4977 [1] PLUNGER  
4D. 132-5182 [1] INSERT  
4E. 132-5183 [1] PLUNGER  
5. 493-5233 [1] SEAL-O-RING  
6. 2K-2940 [1] RING-BACKUP  
7. 6E-0402 [1] HEAD  
8. 8C-3222 M [4] BOLT (M30X3.5X80-MM)  
9. 3S-7023 [4] WASHER (34X57X6-MM THK)  
10. 366-5815 [1] ROD AS  
11. 8T-0672 M [4] BOLT (M24X3X160-MM)  
12. 160-6309 [1] CAP-BEARING  
13. 8J-9180 B [28] SHIM (0.51-MM THK)  
14. 7X-0851 M [4] NUT (M24X3-THD)  
15. 1J-2674 [1] RING-WEAR  
16. 312-4247 [1] SEAL-WIPER  
17. 421-4025 [1] SEAL-U-CUP  
18. 312-4248 [1] SEAL AS-BUFFER  
19. 9T-0094 [1] RING-WEAR  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Caterpillar Parts SIS Catalog D8R :

CYLINDER & LINES GP-LIFT
384-7258 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
384-7257 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
383-8272 CYLINDER & LINES GP-LIFT
COVER GP-MOTOR
512-5159 COVER GP-MOTOR
COOLER GP-HYDRAULIC OIL
377-1614 COOLER GP-HYDRAULIC OIL
CONTROL AR-HYDRAULIC
383-8258 CONTROL AR-HYDRAULIC
383-8148 CONTROL AR-HYDRAULIC
ADAPTER GP-MOTOR
6Y-3526 ADAPTER GP-MOTOR
CYLINDER GP-DUAL TILT
347-3272 CYLINDER GP-DUAL TILT
CYLINDER GP-RIPPER
155-3653 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER PIN PULLER
6E-3113 CYLINDER GP-RIPPER PIN PULLER
CYLINDER GP-RIPPER TIP
155-3652 CYLINDER GP-RIPPER TIP
CYLINDER GP-RIPPER TIP
165-0102 CYLINDER GP-RIPPER TIP
CYLINDER GP-TILT
240-7347 CYLINDER GP-TILT
CYLINDER GP-TILT
491-0252 CYLINDER GP-TILT
CYLINDER GP-TILT
492-0310 CYLINDER GP-TILT

Truck sale:

 
 
Caterpillar D8R
- Crawler dozers
MOHAMED ABDULRAHMAN AL-BAHAR
Caterpillar D8R, Crawler dozers, Construction
428,253 
Caterpillar D8R, Crawler dozers, Construction
- Crawler dozers
WESTRAC
Caterpillar SU BLD D8R, blades, Construction
 
Caterpillar SU BLD D8R, blades, Construction
- blades
HOLT CAT
Caterpillar D8R, Crawler dozers, Construction
 
Caterpillar D8R, Crawler dozers, Construction
- Crawler dozers
M. EZZAT JALLAD & FILS
 
384,598 
Caterpillar D8R, Crawler dozers, Construction
- Crawler dozers
FINANZAUTO S.A.