349D & 349D L Excavators GKF00001-UP (MACHINE) POWERED BY C13 Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

EXCAVATOR 349D EXCAVATOR GKF
349D & 349D L Excavators GKF00001-UP (MACHINE) POWERED BY C13 Engine SEBP6206 349D GKF (2012)

Parts group 349D:

For full view, you need register

ELECTRICAL AND STARTING SYSTEM

ALARM GP

132-1829 ALARM GP

132-1829 ALARM GP -FAULT-FAULT
S/N GKF1-UP; KLH1-UP
24-VOLT
PART OF 291-7767 WIRING GP-CAB

ALTERNATOR GP-CHARGING

117-0177 PULLEY GP-FAN & ALT DRIVE

117-0177 PULLEY GP-FAN & ALT DRIVE
S/N TXF1-UP; MHX11913-UP
3.34:1 DRIVE RATIO. 68.5 MM (2.9 IN) DIAMETER, 8 GROOVE
PART OF 291-9259, 424-8407 ENGINE AR-COMPLETE

235-7133 ALTERNATOR GP-CHARGING

235-7133 ALTERNATOR GP-CHARGING
S/N TXF1-UP; MHX11913-UP
24-VOLT, 80-AMPERE
PART OF 252-7132 ALTERNATOR GP-CHARGING

252-7132 ALTERNATOR GP-CHARGING

252-7132 ALTERNATOR GP-CHARGING
S/N TXF1-UP; MHX11913-UP
80-AMPERE
PART OF 291-9259, 424-8407 ENGINE AR-COMPLETE

BATTERY GP

291-7766 BATTERY & WIRING GP

291-7766 BATTERY & WIRING GP
S/N GKF1-UP; KLH1-UP
PART OF 359-2574, 359-2575 CHASSIS AR
Type 1

291-7766 BATTERY & WIRING GP

291-7766 BATTERY & WIRING GP
S/N GKF1-UP; KLH1-UP
PART OF 359-2574, 359-2575 CHASSIS AR
Type 2

299-2970 BATTERY & WIRING GP

299-2970 BATTERY & WIRING GP -COLD WEATHER
S/N GKF1-UP; KLH1-UP
PART OF 359-2574, 359-2575 CHASSIS AR

CONTROL GP-ELECTRONIC

419-0559 CONTROL AR-VARIABLE-SPEED FAN

419-0559 CONTROL AR-VARIABLE-SPEED FAN -REVERSE
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

ELECTRONICS GP-ENGINE

249-5278 CONTROL & MTG GP-ENGINE ELEK

249-5278 CONTROL & MTG GP-ENGINE ELEK
S/N TXF1-UP; MHX11913-UP
PART OF 291-9259, 424-8407 ENGINE AR-COMPLETE

ELECTRONICS GP-MACHINE

221-8872 CONTROL & MTG GP-MACHINE

221-8872 CONTROL & MTG GP-MACHINE
S/N GKF1-UP; KLH1-UP
PART OF 293-1190 OPERATOR AR

309-5779 ELECTRONICS GP-MACHINE

309-5779 ELECTRONICS GP-MACHINE -ECM
S/N GKF1-UP; KLH1-UP
PART OF 359-2568, 359-2569 GENERAL AR

466-0958 KIT-SOFTWARE

466-0958 KIT-SOFTWARE
S/N GKF1-UP; KLH1-UP
REFER TO SPECIAL INSTRUCTIONS REHS8094 FOR INSTALLATION
FIELD INSTALLATION

CONTROL GP-UNPROGRAMMED

351-8490 CONTROL GP-UNPROGRAMMED

351-8490 CONTROL GP-UNPROGRAMMED -PRODUCT LINK 522
S/N GKF1-UP; KLH1-UP
PART OF 376-6478 CONTROL GP-COMMUNICATION
AN ATTACHMENT

372-4531 CONTROL GP-UNPROGRAMMED

372-4531 CONTROL GP-UNPROGRAMMED -PRODUCT LINK 522
S/N GKF1-UP; KLH1-UP
PART OF 376-4616 CONTROL GP-COMMUNICATION
AN ATTACHMENT

LIGHTING GP

489-5118 KIT-LIGHTING

489-5118 KIT-LIGHTING
S/N GKF1-UP; KLH1-UP
FIELD INSTALLATION

153-2521 LAMP GP-FLOOD

153-2521 LAMP GP-FLOOD
S/N GKF1-UP; KLH1-UP
24-VOLT
PART OF 238-2157 LIGHTING GP-FLOOD
AN ATTACHMENT

153-2523 LAMP GP-FLOOD

153-2523 LAMP GP-FLOOD
S/N GKF1-UP; KLH1-UP
24-VOLT
PART OF 4I-5409 LIGHTING GP-FLOOD

167-3441 LAMP GP-FLOOD

167-3441 LAMP GP-FLOOD
S/N GKF1-UP; KLH1-UP
24-VOLT
PART OF 163-6772, 366-9343 LIGHTING GP-FLOOD
AN ATTACHMENT

339-3505 LAMP GP-FLOOD

339-3505 LAMP GP-FLOOD
S/N GKF1-UP; KLH1-UP
24-VOLT
PART OF 461-0958, 461-0959 LIGHTING GP-FLOOD
AN ATTACHMENT

347-9427 LAMP GP-FLOOD

347-9427 LAMP GP-FLOOD -HID
S/N KLH1-UP
24-VOLT, 35-WATT
PART OF 299-3036 LIGHTING GP-FLOOD
AN ATTACHMENT

163-6772 LIGHTING GP-FLOOD

163-6772 LIGHTING GP-FLOOD -CAB
S/N KLH1-UP
PART OF 380-1657 OPTION AR-REGIONAL
AN ATTACHMENT

170-9294 LIGHTING GP-FLOOD

170-9294 LIGHTING GP-FLOOD -CAB GUARD
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

238-1628 LIGHTING GP-FLOOD

238-1628 LIGHTING GP-FLOOD -CAB GUARD
S/N GKF1-UP; KLH1-UP
PART OF 338-9900 OPTION AR-LIGHTING
AN ATTACHMENT

238-2157 LIGHTING GP-FLOOD

238-2157 LIGHTING GP-FLOOD -BOOM
S/N GKF1-UP; KLH1-UP
PART OF 439-5692, 439-5695 BOOM AR, 294-1252 BOOM AR-MASS, 294-1250 BOOM AR-REACH
AN ATTACHMENT

299-3036 LIGHTING GP-FLOOD

299-3036 LIGHTING GP-FLOOD -BOOM
S/N KLH1-UP
HIGH INTENSITY DISCHARGE
CANNOT BE USED WITH @@@@@238-2157@@@@@
AN ATTACHMENT

366-9343 LIGHTING GP-FLOOD

366-9343 LIGHTING GP-FLOOD -CAB
S/N GKF1-UP; KLH1-UP
PART OF 379-3515 OPTION AR-REGIONAL
AN ATTACHMENT

461-0958 LIGHTING GP-FLOOD

461-0958 LIGHTING GP-FLOOD -CAB
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

461-0959 LIGHTING GP-FLOOD

461-0959 LIGHTING GP-FLOOD -CAB
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

4I-5409 LIGHTING GP-FLOOD

4I-5409 LIGHTING GP-FLOOD -CHASSIS
S/N GKF1-UP; KLH1-UP
PART OF 359-2574, 359-2575 CHASSIS AR

PANEL GP-CIRCUIT BREAKER

299-2965 PANEL & MTG GP-CIRCUIT BREAKER

299-2965 PANEL & MTG GP-CIRCUIT BREAKER
S/N GKF1-UP; KLH1-UP
PART OF 293-1190 OPERATOR AR

299-2966 PANEL GP-CIRCUIT BREAKER

299-2966 PANEL GP-CIRCUIT BREAKER
S/N GKF1-UP; KLH1-UP
PART OF 299-2965 PANEL & MTG GP-CIRCUIT BREAKER

RECEPTACLE GP-AUXILIARY START

299-2969 WIRING GP-AUX START RECEPTACLE

299-2969 WIRING GP-AUX START RECEPTACLE -JUMP START
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

SENSOR GP

297-4510 MOUNTING GP-SENSOR

297-4510 MOUNTING GP-SENSOR
S/N GKF1-UP; KLH1-UP
PART OF 419-0557 SPECIAL AR
AN ATTACHMENT

297-4513 SENSOR & MTG GP-POSITION

297-4513 SENSOR & MTG GP-POSITION -BOOM
S/N GKF1-UP; KLH1-UP
PART OF 419-0557 SPECIAL AR
AN ATTACHMENT

354-0042 SENSOR GP-ENGINE

354-0042 SENSOR GP-ENGINE
S/N TXF1-UP; MHX11913-UP
PART OF 356-2433 ENGINE AR-CORE
Type 1
FOR USE WITH @@@@@354-0048@@@@@

354-0042 SENSOR GP-ENGINE

354-0042 SENSOR GP-ENGINE
S/N TXF1-UP; MHX11913-UP
PART OF 356-2433 ENGINE AR-CORE
Type 2
FOR USE WITH @@@@@354-0048@@@@@

178-2345 SENSOR GP-LIQUID LEVEL

178-2345 SENSOR GP-LIQUID LEVEL -WATER SEPARATOR-WATER IN FUEL
S/N GKF1-UP; KLH1-UP
PART OF 222-8367 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT

222-8367 SENSOR GP-LIQUID LEVEL

222-8367 SENSOR GP-LIQUID LEVEL -WATER SEPARATOR
S/N GKF1-UP; KLH1-UP
PART OF 379-3515, 380-1657 OPTION AR-REGIONAL
AN ATTACHMENT

222-8367 SENSOR GP-LIQUID LEVEL

222-8367 SENSOR GP-LIQUID LEVEL -WATER SEPARATOR
S/N GKF1-UP; KLH1-UP
PART OF 347-9850, 379-3515, 380-1657 OPTION AR-REGIONAL
AN ATTACHMENT

382-2001 SENSOR GP-LIQUID LEVEL

382-2001 SENSOR GP-LIQUID LEVEL -WATER IN FUEL
S/N GKF1-UP; KLH1-UP
PART OF 222-8367 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT

266-2337 SENSOR GP-POSITION

266-2337 SENSOR GP-POSITION
S/N GKF1-UP; KLH1-UP
FIELD REPLACEMENT FOR @@@@@361-4360@@@@@

361-4360 SENSOR GP-POSITION

361-4360 SENSOR GP-POSITION -ROTARY
S/N GKF1-UP; KLH1-UP
PART OF 297-4513 SENSOR & MTG GP-POSITION
FIELD REPLACEMENT ORDER @@@@@266-2337@@@@@
AN ATTACHMENT

194-6725 SENSOR GP-PRESSURE

194-6725 SENSOR GP-PRESSURE
S/N GKF1-UP; KLH1-UP
PART OF 380-3958 LINES GP-FUEL

249-0096 SENSOR GP-PRESSURE

249-0096 SENSOR GP-PRESSURE
S/N TXF1-UP; MHX11913-UP
PART OF 354-0042 SENSOR GP-ENGINE

276-8548 SENSOR GP-PRESSURE

276-8548 SENSOR GP-PRESSURE
S/N TXF1-UP; MHX11913-UP
AMPSEAL CONNECTOR
PART OF 354-0042 SENSOR GP-ENGINE

276-9067 SENSOR GP-PRESSURE

276-9067 SENSOR GP-PRESSURE
S/N TXF1-UP; MHX11913-UP
PART OF 354-0042 SENSOR GP-ENGINE

366-9311 SENSOR GP-PRESSURE

366-9311 SENSOR GP-PRESSURE
S/N GKF1-315; KLH1-214
PART OF 292-7160 LINES GP-BOOM CYLINDER

434-8214 SENSOR GP-PRESSURE

434-8214 SENSOR GP-PRESSURE
S/N GKF316-UP; KLH215-UP
PART OF 292-7160 LINES GP-BOOM CYLINDER
FIELD REPLACEMENT FOR @@@@@366-9311@@@@@

300-9805 SENSOR GP-SPEED

300-9805 SENSOR GP-SPEED
S/N TXF1-UP; MHX11913-UP
PART OF 384-1836 SENSOR GP-SPEED

300-9806 SENSOR GP-SPEED

300-9806 SENSOR GP-SPEED
S/N TXF1-UP; MHX11913-UP
PART OF 354-0042 SENSOR GP-ENGINE

384-1836 SENSOR GP-SPEED

384-1836 SENSOR GP-SPEED
S/N TXF1-UP; MHX11913-UP
PART OF 354-0042 SENSOR GP-ENGINE

4P-5820 SENSOR GP-SPEED

4P-5820 SENSOR GP-SPEED
S/N TXF1-UP; MHX11913-UP
PART OF 313-2148 HOUSING GP-FLYWHEEL

234-5012 SENSOR GP-TEMPERATURE

234-5012 SENSOR GP-TEMPERATURE
S/N TXF1-UP; MHX11913-UP
PART OF 354-0042 SENSOR GP-ENGINE

234-5013 SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE
PART OF 380-3958 LINES GP-FUEL, 354-0042 SENSOR GP-ENGINE

STARTING AID GP

379-3517 KIT-STARTING AID

379-3517 KIT-STARTING AID -COLD WEATHER
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

222-8365 STARTING AID GP-ETHER

222-8365 STARTING AID GP-ETHER
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

239-1134 VALVE GP-ETHER STARTING

239-1134 VALVE GP-ETHER STARTING
S/N GKF1-UP; KLH1-UP
PART OF 222-8365 STARTING AID GP-ETHER
AN ATTACHMENT

STARTING MOTOR GP

3T-9525 PLATE AS-BRUSH

3T-9525 PLATE AS-BRUSH
S/N TXF1-UP; MHX11913-UP
PART OF 269-2757, 348-7651 STARTING MOTOR GP-ELECTRIC

269-2757 STARTING MOTOR GP-ELECTRIC

269-2757 STARTING MOTOR GP-ELECTRIC
S/N TXF1-UP; MHX11913-UP
24-VOLT
PART OF 307-4584 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@348-7651@@@@@

269-2757 STARTING MOTOR GP-ELECTRIC

269-2757 STARTING MOTOR GP-ELECTRIC
S/N TXF1-6813; MHX11913-UP
24-VOLT
PART OF 307-4584 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@348-7651@@@@@

307-4584 STARTING MOTOR GP-ELECTRIC

307-4584 STARTING MOTOR GP-ELECTRIC
S/N TXF1-6813; MHX11913-UP
24-VOLT
PART OF 291-9259 ENGINE AR-COMPLETE

307-4584 STARTING MOTOR GP-ELECTRIC

307-4584 STARTING MOTOR GP-ELECTRIC
S/N TXF6814-UP
24-VOLT
PART OF 291-9259 ENGINE AR-COMPLETE

348-7651 STARTING MOTOR GP-ELECTRIC

348-7651 STARTING MOTOR GP-ELECTRIC
S/N TXF1-UP; MHX11913-UP
24-VOLT
PART OF 307-4584, 369-0809 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@269-2757@@@@@

369-0809 STARTING MOTOR GP-ELECTRIC

369-0809 STARTING MOTOR GP-ELECTRIC
S/N TXF1-UP
24-VOLT, 50-MT
PART OF 424-8407 ENGINE AR-COMPLETE
FOR USE WITH LEFT HAND STARTER APPLICATIONS

SWITCH GP

7N-0719 SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N GKF1-UP; KLH1-UP
PART OF 299-2966 PANEL GP-CIRCUIT BREAKER

125-1302 SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC -START RELAY
S/N GKF1-UP; KLH1-UP
24-VOLT
PART OF 299-2966 PANEL GP-CIRCUIT BREAKER

275-1253 SWITCH GP-PRESSURE

275-1253 SWITCH GP-PRESSURE -FUEL
S/N GKF1-UP; KLH1-UP
PART OF 380-3958 LINES GP-FUEL

319-4420 SWITCH GP-ROTARY

319-4420 SWITCH GP-ROTARY -ENGINE SPEED-THROTTLE POSITION
S/N GKF1-UP; KLH1-UP
PART OF 251-0542, 393-1986 PANEL GP-SWITCH
AN ATTACHMENT

255-2751 SWITCH GP-START

255-2751 SWITCH GP-START -ENGINE, KEY
S/N GKF1-UP; KLH1-UP
PART OF 251-0542, 393-1986 PANEL GP-SWITCH
AN ATTACHMENT

165-5970 SWITCH GP-TOGGLE

165-5970 SWITCH GP-TOGGLE -FUEL PRIMING PUMP
S/N GKF1-UP; KLH1-UP
PART OF 291-7766 BATTERY & WIRING GP

238-2208 SWITCH GP-WIPER

238-2208 SWITCH GP-WIPER -LOWER
S/N KLH1-UP
PART OF 229-9086 WIPER AR-WINDOW
AN ATTACHMENT

WIRING GP

291-7766 BATTERY & WIRING GP

291-7766 BATTERY & WIRING GP
S/N GKF1-UP; KLH1-UP
PART OF 359-2574, 359-2575 CHASSIS AR
Type 1

291-7766 BATTERY & WIRING GP

291-7766 BATTERY & WIRING GP
S/N GKF1-UP; KLH1-UP
PART OF 359-2574, 359-2575 CHASSIS AR
Type 2

299-2970 BATTERY & WIRING GP

299-2970 BATTERY & WIRING GP -COLD WEATHER
S/N GKF1-UP; KLH1-UP
PART OF 359-2574, 359-2575 CHASSIS AR

241-7601 CONNECTION GP-ELECTRICAL

241-7601 CONNECTION GP-ELECTRICAL
S/N TXF1-UP; MHX11913-UP
PROVIDES ADDITIONAL 8-MM GROUND STUD BELOW ECM
PART OF 291-9259, 424-8407 ENGINE AR-COMPLETE

299-2598 FASTENER GP-WIRING HARNESS

299-2598 FASTENER GP-WIRING HARNESS -SYSTEM 1, 1-WAY, 1-PUMP
S/N GKF1-UP; KLH1-UP
PART OF 285-1780, 459-8880 CONTROL AR-AUXILIARY
AN ATTACHMENT

350-8454 FASTENER GP-WIRING HARNESS

350-8454 FASTENER GP-WIRING HARNESS
S/N GKF1-UP; KLH1-UP
PART OF 285-1783 CONTROL AR-AUXILIARY
AN ATTACHMENT

235-8200 PLUG GP-CONNECTOR

235-8200 PLUG GP-CONNECTOR
S/N TXF1-UP; MHX11913-UP
PART OF 291-9259, 424-8407 ENGINE AR-COMPLETE

299-2969 WIRING GP-AUX START RECEPTACLE

299-2969 WIRING GP-AUX START RECEPTACLE -JUMP START
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

267-7642 WIRING GP-CAB

267-7642 WIRING GP-CAB -COUPLER
S/N KLH1-UP
PART OF 302-9403 CONTROL AR-COUPLER
AN ATTACHMENT

291-7767 WIRING GP-CAB

291-7767 WIRING GP-CAB
S/N GKF1-UP; KLH1-UP
PART OF 293-1190 OPERATOR AR
Type 1

291-7767 WIRING GP-CAB

291-7767 WIRING GP-CAB
S/N GKF1-UP; KLH1-UP
PART OF 293-1190 OPERATOR AR
Type 2

291-7767 WIRING GP-CAB

291-7767 WIRING GP-CAB
S/N GKF1-UP; KLH1-UP
PART OF 293-1190 OPERATOR AR
Type 3

291-7767 WIRING GP-CAB

291-7767 WIRING GP-CAB
S/N GKF1-UP; KLH1-UP
PART OF 293-1190 OPERATOR AR
Type 4

291-7767 WIRING GP-CAB

291-7767 WIRING GP-CAB
S/N GKF1-UP; KLH1-UP
PART OF 293-1190 OPERATOR AR
Type 5

336-6334 WIRING GP-CAB

336-6334 WIRING GP-CAB -GRADE CONTROL
S/N GKF1-UP; KLH1-UP
PART OF 419-0557 SPECIAL AR
AN ATTACHMENT

306-8587 WIRING GP-CAMERA

306-8587 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N GKF1-UP; KLH1-UP
PART OF 319-9155 CAMERA AR
AN ATTACHMENT

299-2996 WIRING GP-CHASSIS

299-2996 WIRING GP-CHASSIS -GRADE CONTROL
S/N GKF1-UP; KLH1-UP
PART OF 419-0557 SPECIAL AR
AN ATTACHMENT

299-2599 WIRING GP-COMBINED FLOW

299-2599 WIRING GP-COMBINED FLOW
S/N GKF1-UP; KLH1-UP
PART OF 285-1783 CONTROL AR-AUXILIARY
AN ATTACHMENT

319-1287 WIRING GP-COMMUNICATION

319-1287 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N GKF1-UP; KLH1-UP
PART OF 303-2781 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT

319-1287 WIRING GP-COMMUNICATION

319-1287 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N GKF1-UP; KLH1-UP
PART OF 303-2781 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT

366-9348 WIRING GP-COMMUNICATION

366-9348 WIRING GP-COMMUNICATION -PRODUCT LINK 522
S/N GKF1-UP; KLH1-UP
PART OF 367-8784, 379-7073 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

231-1836 WIRING GP-CONSOLE

231-1836 WIRING GP-CONSOLE -LH
S/N GKF1-UP; KLH1-UP
PART OF 251-0433 WIRING GP-CONSOLE

251-0433 WIRING GP-CONSOLE

251-0433 WIRING GP-CONSOLE
S/N GKF1-UP; KLH1-UP
PART OF 293-1190 OPERATOR AR

251-0435 WIRING GP-CONSOLE

251-0435 WIRING GP-CONSOLE -RH
S/N GKF1-UP; KLH1-UP
PART OF 251-0433 WIRING GP-CONSOLE
Type 1

251-0435 WIRING GP-CONSOLE

251-0435 WIRING GP-CONSOLE -RH
S/N GKF1-UP; KLH1-UP
PART OF 251-0433 WIRING GP-CONSOLE
Type 2

350-8247 WIRING GP-CONVERTER

350-8247 WIRING GP-CONVERTER
S/N GKF1-UP; KLH1-UP
12-VOLT, 10- AMPERE POWER SUPPLY
PART OF 367-8674, 442-8356 OPTION AR-CAB
AN ATTACHMENT

354-0045 WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF1-4789; MHX11913-12108
PART OF 291-9259 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

354-0045 WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF8665-UP
PART OF 291-9259, 424-8407 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

354-0045 WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF1-8664
PART OF 291-9259, 424-8407 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

299-2606 WIRING GP-FAN

299-2606 WIRING GP-FAN -REVERSING
S/N GKF1-UP; KLH1-UP
PART OF 419-0559 CONTROL AR-VARIABLE-SPEED FAN
AN ATTACHMENT

299-2856 WIRING GP-FINE SWING

299-2856 WIRING GP-FINE SWING
S/N GKF1-UP; KLH1-UP
PART OF 359-2574, 359-2575 CHASSIS AR

299-3000 WIRING GP-GRADE CONTROL

299-3000 WIRING GP-GRADE CONTROL -BOOM
S/N GKF1-UP; KLH1-UP
PART OF 419-0557 SPECIAL AR
AN ATTACHMENT

299-3003 WIRING GP-GRADE CONTROL

299-3003 WIRING GP-GRADE CONTROL -STICK
S/N GKF1-UP; KLH1-UP
PART OF 419-0557 SPECIAL AR
AN ATTACHMENT

299-2607 WIRING GP-HAMMER

299-2607 WIRING GP-HAMMER -RETURN FILTER
S/N GKF1-UP; KLH1-UP
PART OF 303-2667 FILTER AR-HYDRAULIC, 294-1276 HAMMER AR-HYDRAULIC
AN ATTACHMENT

306-8544 WIRING GP-MONITOR

306-8544 WIRING GP-MONITOR -WORK AREA VISUAL SYSTEM
S/N KLH1-UP
PART OF 303-2711 CAMERA AR
AN ATTACHMENT

306-8589 WIRING GP-MONITOR

306-8589 WIRING GP-MONITOR -REAR VISION CAMERA
S/N GKF1-UP; KLH1-UP
PART OF 319-9155 CAMERA AR
AN ATTACHMENT

291-7768 WIRING GP-PLATFORM

291-7768 WIRING GP-PLATFORM
S/N GKF1-UP; KLH1-UP
PART OF 293-1190 OPERATOR AR

299-2604 WIRING GP-QUICK COUPLER

299-2604 WIRING GP-QUICK COUPLER
S/N KLH1-UP
PART OF 302-9403 CONTROL AR-COUPLER
AN ATTACHMENT

230-0961 WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N TXF1-UP; MHX11913-UP
PART OF 356-2433 ENGINE AR-CORE

ELECTRONICS GP-MONITOR

221-8861 ELECTRONICS GP-MONITOR

221-8861 ELECTRONICS GP-MONITOR
S/N GKF1-UP; KLH1-UP
PART OF 359-2568, 359-2569 GENERAL AR

HEATER GP

380-0265 HEATER GP-JACKET WATER

380-0265 HEATER GP-JACKET WATER
S/N GKF1-UP; KLH1-UP
240-VOLT
PART OF 379-3517 KIT-STARTING AID
AN ATTACHMENT

ELECTRONICS GP-COMMUNICATION

309-5842 CONTROL & MTG GP-COMMUNICATION

309-5842 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 321SR
S/N GKF1-UP; KLH1-UP
PART OF 303-2781 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

319-4319 CONTROL & MTG GP-COMMUNICATION

319-4319 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 121SR
S/N GKF1-UP; KLH1-UP
PART OF 303-2781 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

366-9353 CONTROL & MTG GP-COMMUNICATION

366-9353 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK CELLULAR
S/N GKF1-UP; KLH1-UP
PART OF 367-8784 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

381-7372 CONTROL & MTG GP-COMMUNICATION

381-7372 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK CELLULAR
S/N GKF1-UP; KLH1-UP
PART OF 379-7073 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

376-4616 CONTROL GP-COMMUNICATION

376-4616 CONTROL GP-COMMUNICATION -PRODUCT LINK CELLULAR, CHINA
S/N GKF1-UP; KLH1-UP
PART OF 366-9353 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT

376-6478 CONTROL GP-COMMUNICATION

376-6478 CONTROL GP-COMMUNICATION -PRODUCT LINK CELLULAR
S/N GKF1-UP; KLH1-UP
PART OF 381-7372 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT

262-1421 ELECTRONICS GP-COMMUNICATION

262-1421 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 300
S/N GKF1-UP; KLH1-UP
PART OF 309-5842 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT

303-2781 INSTALLATION AR-COMMUNICATION

303-2781 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 321SR
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

367-8784 INSTALLATION AR-COMMUNICATION

367-8784 INSTALLATION AR-COMMUNICATION
S/N GKF1-UP; KLH1-UP
PART OF 379-3515 OPTION AR-REGIONAL
AN ATTACHMENT

379-7073 INSTALLATION AR-COMMUNICATION

379-7073 INSTALLATION AR-COMMUNICATION -PRODUCT LINK CELLULAR
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

319-1287 WIRING GP-COMMUNICATION

319-1287 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N GKF1-UP; KLH1-UP
PART OF 303-2781 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT

319-1287 WIRING GP-COMMUNICATION

319-1287 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N GKF1-UP; KLH1-UP
PART OF 303-2781 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT

366-9348 WIRING GP-COMMUNICATION

366-9348 WIRING GP-COMMUNICATION -PRODUCT LINK 522
S/N GKF1-UP; KLH1-UP
PART OF 367-8784, 379-7073 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

270-5603 MOUNTING GP-ANTENNA

270-5603 MOUNTING GP-ANTENNA -GRADE CONTROL
S/N GKF1-UP; KLH1-UP
PART OF 419-0557 SPECIAL AR
AN ATTACHMENT

309-5771 MOUNTING GP-ANTENNA

309-5771 MOUNTING GP-ANTENNA -PRODUCT LINK
S/N GKF1-UP; KLH1-UP
PART OF 303-2781 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

366-9356 MOUNTING GP-ANTENNA

366-9356 MOUNTING GP-ANTENNA -PRODUCT LINK CELLULAR
S/N GKF1-UP; KLH1-UP
PART OF 367-8784 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT

366-9356 MOUNTING GP-ANTENNA

366-9356 MOUNTING GP-ANTENNA -PRODUCT LINK CELLULAR
S/N GKF1-UP; KLH1-UP
PART OF 367-8784, 379-7073 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT

BLOCK GP-JUNCTION

9W-0742 BLOCK GP-JUNCTION

9W-0742 BLOCK GP-JUNCTION
S/N GKF1-UP; KLH1-UP
PART OF 299-2969 WIRING GP-AUX START RECEPTACLE
AN ATTACHMENT

CAMERA GP

313-7833 CAMERA & MOUNTING GP

313-7833 CAMERA & MOUNTING GP -WORK AREA VISUAL SYSTEM, REAR
S/N GKF1-UP; KLH1-UP
PART OF 307-7757 MOUNTING GP-CAMERA
AN ATTACHMENT

303-2711 CAMERA AR

303-2711 CAMERA AR -WORK AREA VISUAL SYSTEM, BOOM
S/N KLH1-UP
AN ATTACHMENT

319-9155 CAMERA AR

319-9155 CAMERA AR -WORK AREA VISUAL SYSTEM, REAR
S/N GKF1-UP; KLH1-UP
AN ATTACHMENT

336-6684 CAMERA GP

336-6684 CAMERA GP -WORK AREA VISUAL SYSTEM, REAR
S/N GKF1-UP; KLH1-UP
12-VOLT, 24-VOLT
PART OF 313-7833 CAMERA & MOUNTING GP
AN ATTACHMENT

306-8692 MOUNTING GP-CAMERA

306-8692 MOUNTING GP-CAMERA -WORK AREA VISUAL SYSTEM, BOOM
S/N KLH1-UP
PART OF 303-2711 CAMERA AR
AN ATTACHMENT

307-7757 MOUNTING GP-CAMERA

307-7757 MOUNTING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N GKF1-UP; KLH1-UP
PART OF 319-9155 CAMERA AR
AN ATTACHMENT

313-7971 MOUNTING GP-CAMERA

313-7971 MOUNTING GP-CAMERA -WORK AREA VISUAL SYSTEM
S/N KLH1-UP
PART OF 303-2711 CAMERA AR
AN ATTACHMENT

306-8587 WIRING GP-CAMERA

306-8587 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N GKF1-UP; KLH1-UP
PART OF 319-9155 CAMERA AR
AN ATTACHMENT

RADIO GP

336-3545 RADIO GP-COMMUNICATION

336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N GKF1-UP; KLH1-UP
PART OF 319-4319 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT

HARNESS GP

464-0608 HARNESS AS-CAB

464-0608 HARNESS AS-CAB
S/N GKF1-UP; KLH1-UP
PART OF 291-7767 WIRING GP-CAB

354-0048 HARNESS AS-ENGINE

354-0048 HARNESS AS-ENGINE
S/N TXF1-4789; MHX11913-12108
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL

385-2664 HARNESS AS-ENGINE

385-2664 HARNESS AS-ENGINE
S/N TXF4790-8664
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL
FOR USE WITH INDUSTRIAL AND COMMERCIAL APPLICATIONS WITH OCV SYSTEM
CANNOT BE USED WITH MACHINE APPLICATIONS INDUSTRIAL AND COMMERCIAL APPLICATIONS WITH NO OVC SYSTEM

495-9718 HARNESS AS-PANEL

495-9718 HARNESS AS-PANEL
S/N GKF1-UP; KLH1-UP
PART OF 251-0542 PANEL GP-SWITCH
AN ATTACHMENT

516-4037 HARNESS AS-SENSOR

516-4037 HARNESS AS-SENSOR
S/N TXF8665-UP
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL

319-0956 HARNESS AS-SOLENOID

319-0956 HARNESS AS-SOLENOID
S/N GKF1-UP; KLH1-UP
PART OF 291-7766 BATTERY & WIRING GP

418-7614 HARNESS AS-WIRING

418-7614 HARNESS AS-WIRING
S/N TXF1-UP; MHX11913-UP
PART OF 230-0961 WIRING GP-UNIT INJECTOR

Information:

(For parts list, see above)

ELECTRICAL AND STARTING SYSTEM

ALARM GP

Operation and Maintenance Manual

Travel Alarm - Test - If Equipped
345D, 349D and 349D2 Excavators

Troubleshooting

MID 039 - CID 0271 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

ALTERNATOR GP-CHARGING

Engine News

Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}

Operation and Maintenance Manual

Belt - Inspect/Adjust/Replace
345D, 349D and 349D2 Excavators

Special Instruction

Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}

Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}

Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}

Specifications

Alternator and Regulator
C11 and C13 Engines

Alternator Mounting
C11 and C13 Engines

Alternator and Regulator
C11 and C13 Engines

Alternator Mounting
C11 and C13 Engines

Alternator and Regulator
C11 and C13 Engines

Alternator Mounting
C11 and C13 Engines

Alternator and Regulator
C11 and C13 Engines

Testing and Adjusting

Charging System - Test
C11 and C13 Engines for Caterpillar Built Machines

Charging System - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

Alternator - Noisy Operation
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0167 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0168 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Disassembly and Assembly

Alternator - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Alternator - Remove and Install
345D and 349D Excavators C13 Engine Supplement

Service Magazine

Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

BATTERY GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
345D, 349D and 349D2 Excavators

Battery - Clean
345D, 349D and 349D2 Excavators

Battery Hold-Down - Tighten
345D, 349D and 349D2 Excavators

Battery - Recycle
345D, 349D and 349D2 Excavators

Fuses - Replace
345D, 349D and 349D2 Excavators

Special Instruction

Rework Procedure for the Battery Cover for Certain Excavators and Mobile Hydraulic Power Units{1401, 1402, 1408}
Rework Procedure for the Battery Cover for Certain Excavators and Mobile Hydraulic Power Units{1401, 1402, 1408}

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE BATTERY AND REWORKING THE BATTERY HOLD-DOWN ON CERTAIN 312D, 313D, 318D, 320D, 323D, 324D, 326D, 329D, 336D, 340D, AND 349D EXCAVATORS AND MOBILE HYDRAULIC POWER UNITS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BATTERY AND REWORKING THE BATTERY HOLD-DOWN ON CERTAIN 312D, 313D, 318D, 320D, 323D, 324D, 326D, 329D, 336D, 340D, AND 349D EXCAVATORS AND MOBILE HYDRAULIC POWER UNITS

Service Letter-CFEL

Tool Operating Manual

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Service Letter-China

Service Letter-Asia

Service Letter-APD

Testing and Adjusting

Battery - Test
C11 and C13 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 01 System Voltage Low
C11 and C13 Engines for Caterpillar Built Machines

CID 0168 FMI 02 System Voltage intermittent/erratic
C11 and C13 Engines for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
C11 and C13 Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0167 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0168 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Disassembly and Assembly

Battery - Remove and Install
345D and 349D Excavators C13 Engine Supplement

Service Magazine

Improved Battery Processing and Handling Process Reduces the Amount of Discharged Batteries in Certain Excavators and Mobile Hydraulic Power Units {1401, 1402, 1408}
2015/02/12

An Improved Battery and Hold Down Cover is Now Used on Certain Excavators {1401, 1402, 1408}
An Improved Battery and Hold Down Cover is Now Used on Certain Excavators {1401, 1402, 1408}

CONTROL GP-ELECTRONIC

Tool Operating Manual

Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}

Systems Operation

Electronic Control System
345D, 349D and 349D2 Excavators Hydraulic System

Service Magazine

New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat ® Products {7610, 7620}
2014/02/06

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

ELECTRONICS GP-ENGINE

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Special Instruction

Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}

Installation and Configuration Procedure for a New Software Upgrade Kit to Reduce Operational Cost on Certain 345D and 349D Excavators {1920, 7620}
Installation and Configuration Procedure for a New Software Upgrade Kit to Reduce Operational Cost on Certain 345D and 349D Excavators {1920, 7620}

Troubleshooting

ECM Will Not Communicate with Other Systems or Display Modules
C11 and C13 Engines for Caterpillar Built Machines

Self-Diagnostics
C11 and C13 Engines for Caterpillar Built Machines

Flash Programming
C11 and C13 Engines for Caterpillar Built Machines

System Overview
C11 and C13 Engines for Caterpillar Built Machines

Electronic Service Tool Will Not Communicate with ECM
C11 and C13 Engines for Caterpillar Built Machines

Programming Parameters
C11 and C13 Engines for Caterpillar Built Machines

Event Codes
C11 and C13 Engines for Caterpillar Built Machines

CID 0268 FMI 02 Check Programmable Parameters
C11 and C13 Engines for Caterpillar Built Machines

CID 0248 FMI 12 Cat Data Link failed
C11 and C13 Engines for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
C11 and C13 Engines for Caterpillar Built Machines

System Configuration Parameters
C11 and C13 Engines for Caterpillar Built Machines

Cat Data Link Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

User Defined Shutdown Input Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Diagnostic Codes
C11 and C13 Engines for Caterpillar Built Machines

Replacing the ECM
C11 and C13 Engines for Caterpillar Built Machines

ECM Will Not Accept Factory Passwords
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0590 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Disassembly and Assembly

Engine Control Module - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Engine Electronic Control - Remove and Install
345D and 349D Excavators C13 Engine Supplement

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

New Software Is Used on Certain Tier 3 Machine Engines {1901, 1920, 7620}
2014/10/22

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Machine Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
2013/10/25

An Installation and Configuration Procedure for a New Software Upgrade Kit to Reduce Operational Cost on Certain 345D and 349D Excavators is Available {1920, 7620}
An Installation and Configuration Procedure for a New Software Upgrade Kit to Reduce Operational Cost on Certain 345D and 349D Excavators is Available {1920, 7620}

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

ELECTRONICS GP-POWER TRAIN

Special Instruction

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

ELECTRONICS GP-IMPLEMENT

Special Instruction

Troubleshooting

Sensor Supply - Test
C11 and C13 Engines for Caterpillar Built Machines

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

ELECTRONICS GP-MACHINE

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Machine Security System - If Equipped
345D, 349D and 349D2 Excavators

Special Instruction

Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}

Technical Information Bulletin

Machine ECM Trouble Shooting Guideline on Certain Excavators and Mobile Hydraulic Power Units{7569, 7600}
Machine ECM Trouble Shooting Guideline on Certain Excavators and Mobile Hydraulic Power Units{7569, 7600}

Systems Operation

General Information
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Operation
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Diagnostic Operation
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (Machine)
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Related Components
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Testing and Adjusting

Electronic Control Module (ECM) - Flash Program
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (ECM) - Replace
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Calibration
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Glossary of Electrical Terms
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (ECM) - Configure
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

General Information
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0041 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Diagnostic Code List
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Event Code List
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0248 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0262 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0254 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0246 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0247 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

E-Ceiling and Cab Avoidance - Troubleshoot
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Machine ECM Software has been Improved for Certain 300D Series Excavators {7610, 7620}
2013/09/20

CONTROL GP-UNPROGRAMMED

Systems Operation

Electronic Control Module (Machine)
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Testing and Adjusting

Electronic Control Module (ECM) - Flash Program
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (ECM) - Replace
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (ECM) - Configure
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

ELECTRONICS GP

Special Instruction

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat^® Products {1408}

Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}

Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat^® Products {1400}

LIGHTING GP

Operation and Maintenance Manual

High Intensity Discharge Lamp (HID) - Replace - If Equipped
345D, 349D and 349D2 Excavators

Specifications

Boom Lighting
345D, 349D and 349D2 Excavator Machine System Specifications

Service Magazine

An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}

MOTOR GP

New Software Is Now Used on Certain Excavators with PL552 China System {5927}
New Software Is Now Used on Certain Excavators with PL552 China System {5927}

PANEL GP-CIRCUIT BREAKER

Operation and Maintenance Manual

Circuit Breakers - Reset
345D, 349D and 349D2 Excavators

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Troubleshooting

MID 039 - CID 2280 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

PANEL GP-FUSE

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

RECEPTACLE GP-AUXILIARY START

Service Magazine

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

SENSOR GP

Special Instruction

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Technical Information Bulletin

Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}

Incorrect Atmospheric Sensor and Ladder Clip Orientation May Cause Pin Breakage on Certain C11 and C13 Engines {1439}
Incorrect Atmospheric Sensor and Ladder Clip Orientation May Cause Pin Breakage on Certain C11 and C13 Engines {1439}

Specifications

Engine Oil Pressure Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Liquid Level Sensor (Water Separator)
345D, 349D and 349D2 Excavator Machine System Specifications

Liquid Level Sensor (Water Separator)
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Fuel Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Position Sensor (Stick)
345D, 349D and 349D2 Excavator Machine System Specifications

Speed/Timing Sensor
C11 and C13 Engines

Fuel Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Troubleshooting

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0261 FMI 13 Engine Timing Calibration required
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

Engine Speed/Timing Sensor Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Speed/Timing Sensor - Calibrate
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0041 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0190 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0262 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1960 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1968 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1968 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1968 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1969 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1969 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1969 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 3012 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 3012 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 3012 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensor Signal (Analog, Active) - Test
C11 and C13 Engines for Caterpillar Built Machines

Sensor Supply - Test
C11 and C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Fuel Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Boost Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Camshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Crankshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Service Magazine

Improved Fuel Level Sender As Is Now Used on Certain Cat® Products {1273, 7481}
2012/10/08

The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}
The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}

A New Pressure Sensor on the Boom Cylinder is Now Available for Certain 349D Excavators {1439}
2013/04/25

Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}

SOLENOID GP

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

STARTING AID GP

Operation and Maintenance Manual

Ether Starting Aid Cylinder - Replace - If Equipped
345D, 349D and 349D2 Excavators

Engine Starting
345D, 349D and 349D2 Excavators

Specifications

Ether Starting Aid
345D, 349D and 349D2 Excavator Machine System Specifications

Troubleshooting

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Ether Injection System - Test
C11 and C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Ether Start Valve - Remove and Install
345D and 349D Excavators C13 Engine Supplement

Service Magazine

A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/24

STARTING MOTOR GP

Special Instruction

Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Electric Starting Motor
C11 and C13 Engines

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Pinion Clearance - Adjust
C11 and C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Electric Starting Motor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Electric Starting Motor - Remove and Install
345D and 349D Excavators C13 Engine Supplement

Service Magazine

The Starter Solenoid is Improved on Certain Machines {1453}
2013/04/04

SWITCH GP

Operation and Maintenance Manual

Battery Disconnect Switch
345D, 349D and 349D2 Excavators

Special Instruction

Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}

Specifications

Engine Oil Level Switch - If Equipped
C11 and C13 Engines

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Switches
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 1960 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

A New Start Switch Group is Now Used on Certain Excavators and Mobile Hydraulic Power Units {1416}
2013/08/01

TOOLS

Tool Operating Manual

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}

146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}

Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

Electronic Service Tool Will Not Communicate with ECM
C11 and C13 Engines for Caterpillar Built Machines

Electronic Service Tools
C11 and C13 Engines for Caterpillar Built Machines

Factory Passwords
C11 and C13 Engines for Caterpillar Built Machines

Service Tools
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Using Caterpillar Electronic Technician to Determine Diagnostic Codes
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11

New Software For Cat® ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

VALVE GP

Systems Operation

Solenoid Valve (Proportional Reducing) - Power Shift System
345D, 349D and 349D2 Excavators Hydraulic System

WARNING GP

Testing and Adjusting

Overload Warning - Set - If Equipped
345D, 349D and 349D2 Excavators Hydraulic System

WIRING GP

Operation and Maintenance Manual

Battery Disconnect Switch
345D, 349D and 349D2 Excavators

Battery or Battery Cable - Inspect/Replace
345D, 349D and 349D2 Excavators

Battery - Recycle
345D, 349D and 349D2 Excavators

Power Receptacle - If Equipped
345D, 349D and 349D2 Excavators

Camera Harness - Disconnect and Connect
345D, 349D and 349D2 Excavators

Fuses - Replace
345D, 349D and 349D2 Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation of the 299-2598 Chassis Wiring Gp on Certain Hydraulic Excavators{1408, 7553}
Installation of the 299-2598 Chassis Wiring Gp on Certain Hydraulic Excavators{1408, 7553}

Master Guide for Field Installation of 459-8880 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5063, 7405, 7553, 7557}
Master Guide for Field Installation of 459-8880 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5063, 7405, 7553, 7557}

Installation Procedure for 350-8454 Wiring Harness Fastener Gp for Certain Hydraulic Excavators{1408, 7553}
Installation Procedure for 350-8454 Wiring Harness Fastener Gp for Certain Hydraulic Excavators{1408, 7553}

Installation Procedure for 299-2599 Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for 299-2599 Wiring Gp for Certain Hydraulic Excavators{1408}

Installation of the 469-5771 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 3108, 5057, 5059, 5063, 5070, 5073, 5459, 7405, 7553, 7557}
Installation of the 469-5771 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 3108, 5057, 5059, 5063, 5070, 5073, 5459, 7405, 7553, 7557}

Technical Information Bulletin

Improper Routing of Product Link Antenna Coax on Certain Excavators{1408}
Improper Routing of Product Link Antenna Coax on Certain Excavators{1408}

Specifications

Electronic Unit Injector Wiring
C11 and C13 Engines

Tool Operating Manual

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Switches
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
345D, 349D and 349D2 Excavators Hydraulic System

System Schematic
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Component and Connector Locations
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

A New Console Harness Assembly Is Available for Certain Excavators {1408}
2012/11/01

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

Improved Battery Processing and Handling Process Reduces the Amount of Discharged Batteries in Certain Excavators and Mobile Hydraulic Power Units {1401, 1402, 1408}
2015/02/12

An Improved Battery and Hold Down Cover is Now Used on Certain Excavators {1401, 1402, 1408}
An Improved Battery and Hold Down Cover is Now Used on Certain Excavators {1401, 1402, 1408}

CONNECTION GP

Tool Operating Manual

Service Magazine

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}

ELECTRONICS GP-MONITOR

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Monitoring System
345D, 349D and 349D2 Excavators

Special Instruction

Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}

Installation of Cat® Terrain for Excavators{7605}
Installation of Cat^® Terrain for Excavators{7605}

Installation of G610 Hardware for Cat® Terrain for Excavators{7605}
Installation of G610 Hardware for Cat^® Terrain for Excavators{7605}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Procedure to Troubleshoot the Tamper Feature on Certain Excavators with Updated PL552 Gateway Software {7490, 7610, 7620}
Procedure to Troubleshoot the Tamper Feature on Certain Excavators with Updated PL552 Gateway Software {7490, 7610, 7620}

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

Technical Information Bulletin

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Tool Operating Manual

Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}

Systems Operation

Setting Mode
D Series Excavator Monitoring System

Maintenance Information Mode
D Series Excavator Monitoring System

Service Mode
D Series Excavator Monitoring System

Password Change Mode
D Series Excavator Monitoring System

Password Entry
D Series Excavator Monitoring System

Device Test Mode
D Series Excavator Monitoring System

Override Mode
D Series Excavator Monitoring System

Tool Program Mode
D Series Excavator Monitoring System

Output Components
D Series Excavator Monitoring System

Status Mode
D Series Excavator Monitoring System

Input Components
D Series Excavator Monitoring System

Data Link
D Series Excavator Monitoring System

Prestart Monitoring Function
D Series Excavator Monitoring System

General Information
D Series Excavator Monitoring System

Warning Operation
D Series Excavator Monitoring System

Maintenance Mode
D Series Excavator Monitoring System

ECM Information Mode
D Series Excavator Monitoring System

Diagnostic Mode
D Series Excavator Monitoring System

Menu Outline
D Series Excavator Monitoring System

Calibration Mode
D Series Excavator Monitoring System

Performance Mode
D Series Excavator Monitoring System

Configuration Mode
D Series Excavator Monitoring System

Troubleshooting

CID 0286 FMI 05 EMS Oil Lamp open/short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0286 FMI 06 EMS Oil Lamp short to +batt
C11 and C13 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

New Software Is Now Available for Cat® Product Link 522 Systems {7494, 7606, 7620}
2013/04/12

Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/16

New Phone Number for VIMS Support Is Now Available for All Cat® Products Equipped with VIMS {7601}
2015/03/02

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

HEATER GP

Operation and Maintenance Manual

Engine Starting
345D, 349D and 349D2 Excavators

ELECTRONICS GP-WORK TOOL

Special Instruction

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

ELECTRONICS GP-COMMUNICATION

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

Operation and Maintenance Manual

Product Link
345D, 349D and 349D2 Excavators

Special Instruction

Installation Guide for Product Link PL121SR and PL321{7606}
Installation Guide for Product Link PL121SR and PL321{7606}

Product Link PL121SR{7606}
Product Link PL121SR{7606}

Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}

Product LinkTM PL421 Installation Quick Reference Guide{7606}
Product Link^TM PL421 Installation Quick Reference Guide{7606}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Technical Information Bulletin

Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat^® Machines Equipped With VIMS3G{7601, 7620}

Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606}
Improper Customer Access and Asset Merging Within VisionLink^TM and PartStore^TM Through UCID Consolidation{7567, 7606}

Improper Routing of Product Link Antenna Coax on Certain Excavators{1408}
Improper Routing of Product Link Antenna Coax on Certain Excavators{1408}

Product Link Machine Information Is Not Being Reported On Cat® Products Located in India{7606}
Product Link Machine Information Is Not Being Reported On Cat^® Products Located in India{7606}

Tool Operating Manual

Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

New Software Is Now Available for Cat® Product Link 522 Systems {7494, 7606, 7620}
2013/04/12

Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2014/03/10

New Software Is Now Available For Product Link 522 Systems On All Cat® Products {7606, 7620}
2013/04/22

Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04

Improved VisionLinkTMStore is Now Available for all Caterpillar Products {7606}
2013/03/29

Device Transfers Are Now Supported In VisionLinkTM Store {7606}
2013/03/29

Improved VisionLinkTM Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606}
2013/03/29

New Product Link Software for PL121 and PL300 Is Now Available for All Cat® Products {7606, 7610, 7620}
2013/05/02

New Software Is Now Available for All Cat® Products With The Product Link 522 System {7606}
2013/09/27

New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
2013/07/08

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software For Cat® ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15

New Software Is Now Available For All Cat® Products With PL522 China System {7606, 7620}
2013/08/19

Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606}
2013/09/16

Improvements for Products and Systems Connected to Product Link {7606}
2013/10/02

New Product Link Software for PL300 Is Now Available for All Cat ®Products {7606, 7620}
2013/10/21

New Software Is Now Available for All Cat® Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2013/10/02

Improved Product Link Satellite System Special Instruction guide {7606}
2013/12/20

An Improved Routing of the Antenna Harness is Now Used on Certain Excavators {7338, 7606}
2014/01/07

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606}
2014/08/08

PL522 China Module Equipped With Improved SIM Card Is Available On Cat® Products in China {7606}
2014/03/11

Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
2014/06/06

Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
2014/08/13

Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/16

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat® Products with Cat® Product Link 121/321 {7606}
2014/12/24

Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06

Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606, 7620}
2015/06/26

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02

New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
2015/09/11

An Improved Satellite Antenna Is Now Used on Certain Excavators {7338, 7606}
An Improved Satellite Antenna Is Now Used on Certain Excavators {7338, 7606}

Troubleshooting Procedure For Cat® Product Link (PL522) is Now Available For Certain Excavators in China {7606}
Troubleshooting Procedure For Cat^® Product Link (PL522) is Now Available For Certain Excavators in China {7606}

CAMERA GP

Operation and Maintenance Manual

Camera Harness - Disconnect and Connect
345D, 349D and 349D2 Excavators

Camera
345D, 349D and 349D2 Excavators

Camera - Clean/Adjust - If Equipped
345D, 349D and 349D2 Excavators

Special Instruction

WAVS Light Duty Installation Guide for Certain Cat® Products{7347, 7348}
WAVS Light Duty Installation Guide for Certain Cat^® Products{7347, 7348}

Technical Information Bulletin

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Service Magazine

Improved Camera Is Now Available for Cat® Object Detection And Vision Applications On Certain Cat Products {7348}
Improved Camera Is Now Available for Cat^® Object Detection And Vision Applications On Certain Cat Products {7348}

ELECTRONICS GP-GENERATOR SET

Special Instruction

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

METER GP-SERVICE

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

ANTENNA GP

Specifications

Antenna
345D, 349D and 349D2 Excavator Machine System Specifications

HARNESS GP

Special Instruction

Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat^® Products Equipped with BR Series Connectors {1408}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Tool Operating Manual

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Magazine