AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

419-0071 CYLINDER GP-STICK S/N GKF1-UP; KLH1-UP 190-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE PART OF 274-2452 CYLINDER & SEAL GP-STICK AN ATTACHMENT 349D


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 349D EXCAVATOR GKF
 349D & 349D L Excavators GKF00001-UP (MACHINE) POWERED BY C13 Engine SEBP6206 349D GKF   (2012)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-STICK
370-6692 CYLINDER GP-STICK
CYLINDER GP-STICK
370-6692 CYLINDER GP-STICK
CYLINDER GP-STICK
419-0071 CYLINDER GP-STICK
CYLINDER GP-STICK
513-3691 CYLINDER GP-STICK
GUARD GP-CYLINDER
295-9600 GUARD GP-CYLINDER
 

#SEBP62060500
 

419-0071: CYLINDER GP-STICK

419-0071 CYLINDER GP-STICK
S/N GKF1-UP; KLH1-UP
190-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 274-2452 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i05798313 SEBP6206
4190071 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 358-8462 [1] CYLINDER AS  
1A. 462-2010 [1] BUSHING  
2. 358-8472 [1] ROD AS  
2A. 228-5618 [1] BUSHING  
3. 370-6693 [1] HEAD  
4. 420-1752 J [1] SEAL-O-RING  
5. 370-6665 J [2] RING-BACKUP  
6. 165-9293 J [1] SEAL-LIP TYPE  
7. 087-5397 J [1] RING-BACKUP  
8. 259-0736 J [1] SEAL-U-CUP  
9. 266-7958 J [1] SEAL-BUFFER  
10. 114-0763 [1] BUSHING  
11. 087-5393 [1] RING-RETAINING  
12. 200-3620 J [1] RING-SEAL  
13. 359-7190 [1] STOP  
14. 358-8478 [1] PISTON  
15. 204-2845 J [2] RING  
16. 495-8218 J [1] SEAL AS  
17. 204-2846 J [1] RING  
18. 126-1971 M [1] LOCKNUT-SPECIAL  
19. 225-4641 [1] RING-RETAINING  
20. 225-4642 [1] RING  
21. 095-0930 [2] RING-RETAINING (EXTERNAL)  
22. 359-7189 [1] STOP  
23. 173-9684 M [10] BOLT (M24X3X100-MM)  
   
    AVAILABLE REPAIR KIT(S):
  519-7969 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP62060501
 

513-3691: CYLINDER GP-STICK

513-3691 CYLINDER GP-STICK
S/N GKF1-UP; KLH1-UP
90-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 358-8460, 518-0753 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT FOR @@@@@225-4526@@@@@
AN ATTACHMENT
i07080765 SEBP6206
5133691 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 513-3690 [1] CYLINDER AS-STICK  
1A. 462-2010 [1] BUSHING  
2. 513-3687 [1] ROD AS  
2A. 228-5618 [1] BUSHING  
3. 370-6693 [1] HEAD  
4. 370-6664 J [1] SEAL-O-RING  
5. 370-6665 J [2] RING-BACKUP  
6. 165-9293 J [1] SEAL-LIP TYPE  
7. 087-5397 J [1] RING-BACKUP  
8. 333-8673 J [1] SEAL-U-CUP  
9. 333-8672 J [1] SEAL-BUFFER  
10. 114-0763 [1] BUSHING  
11. 524-7886 [1] STOP  
12. 200-3620 J [1] RING-SEAL  
13. 359-7190 [1] STOP  
14. 358-8478 [1] PISTON  
15. 204-2845 J [2] RING  
16. 495-8218 J [1] SEAL AS  
17. 204-2846 J [1] RING  
18. 126-1971 M [1] LOCKNUT-SPECIAL  
19. 143-1452 [2] RING-RETAINING  
20. 087-5393 [1] RING-RETAINING  
21. 147-5764 [1] RING-RETAINING  
22. 147-5765 [1] RING  
23. 173-9684 M [10] BOLT (M24X3X100-MM)  
24. 6V-8237 [10] WASHER (26X44X4-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  518-5140 J KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP62060502
 

225-4515: DRIVE GP-AUXILIARY PUMP

225-4515 DRIVE GP-AUXILIARY PUMP
S/N GKF1-UP; KLH1-UP
PART OF 285-1783 CONTROL AR-AUXILIARY
AN ATTACHMENT
i05776815 SEBP6206
2254515 DRIVE GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 234-4620 Y [1] DRIVE GP-AUXILIARY PUMP (ACCESSORY DRIVE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP62060503
 

234-4620: DRIVE GP-AUXILIARY PUMP

234-4620 DRIVE GP-AUXILIARY PUMP -ACCESSORY DRIVE
S/N GKF1-UP; KLH1-UP
PART OF 225-4515 DRIVE GP-AUXILIARY PUMP
AN ATTACHMENT
i04725409 SEBP6206
2344620 DRIVE GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 295-9441 Y [1] DRIVE GP-AUXILIARY PUMP (ACCESSORY DRIVE)  
2. 108-1781 M [8] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62060504
 

295-9441: DRIVE GP-AUXILIARY PUMP

295-9441 DRIVE GP-AUXILIARY PUMP -ACCESSORY DRIVE
S/N GKF1-UP; KLH1-UP
PART OF 234-4620 DRIVE GP-AUXILIARY PUMP
AN ATTACHMENT
i04725435 SEBP6206
2959441 DRIVE GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8754 [3] SPACER-BEARING (35X45X3-MM THK)  
2. 170-9964 [1] BEARING  
3. 2W-1145 [1] RING-RETAINING (INTERNAL)  
4. 206-9298 [1] SEAL-O-RING  
5. 8T-9597 [1] RING-RETAINING  
6. 236-6919 [1] SEAL-O-RING  
7. 8H-5352 [2] BALL BEARING  
8. 8T-9080 M [2] BOLT-SOCKET HEAD (M12X1.75X20-MM)  
9. 249-6670 [1] SEAL-O-RING  
10. 225-4517 [1] PLATE  
11. 8T-4944 M [3] BOLT-SOCKET HEAD (M16X2X40-MM)  
  M   METRIC PART
 

#SEBP62060505
 

296-6249: DRIVE GP-SWING

296-6249 DRIVE GP-SWING -WITH MOTOR, RH
S/N GKF1-UP; KLH1-UP
PART OF 227-6042 POWER TRAIN AR
i04562446 SEBP6206
2966249 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4505 Y [1] MOTOR & MTG GP-SWING  
2. 296-6250 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP62060506
 

296-6250: DRIVE GP-SWING

296-6250 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N GKF1-UP; KLH1-UP
PART OF 296-6249 DRIVE GP-SWING
i04562538 SEBP6206
2966250 DRIVE GP-SWING Parts scheme 2966250 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 4I-7464 [4] GEAR-PLANETARY (25-TEETH)  
3. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
4. 4I-7467 [1] GEAR-RING (72-TEETH)  
5. 6V-7238 [1] VALVE-SHUTOFF  
6. 7I-7728 [1] CARRIER-PLANETARY  
7. 7Y-0597 [1] SPACER-SPECIAL  
8. 7Y-1238 [1] CARRIER  
9. 093-1730 [2] RING-RETAINING  
10. 094-1509 [4] SHAFT-PLANETARY  
11. 094-1528 [8] WASHER (53X84X1-MM THK)  
12. 095-1806 [1] BEARING-ROLLER  
13. 096-2653 [1] RING-RETAINING  
14. 096-4339 [1] BEARING AS-ROLLER  
15. 110-7216 [1] GEAR-SUN (24-TEETH)  
16. 114-1383 [4] SHAFT-PLANETARY  
17. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
18. 114-1399 [1] PIPE-GAUGE  
19. 114-1401 [1] COVER-HOUSING  
20. 114-1403 [1] CAGE  
21. 136-2802 [2] CONNECTOR  
22. 136-2803 [2] CLIP  
23. 169-5534 [1] HOUSING  
24. 169-5535 [1] GEAR-SUN (20-TEETH)  
25. 227-6108 [1] SHAFT-PINION  
26. 227-6215 [1] BOSS (1/4-18-THD)  
27. 296-6251 I [1] HOSE AS  
28. 093-1731 [1] RING-RETAINING  
29. 094-0584 [8] WASHER (40.3X72X1-MM THK)  
30. 199-4582 [4] BEARING AS  
31. 095-0886 [4] PIN-SPRING  
32. 509-6676 [4] PIN-SPRING  
33. 135-9044 [2] SEAL-LIP TYPE  
34. 3K-0360 [1] SEAL-O-RING  
35. 5P-2235 [1] SEAL-O-RING  
36. 191-2513 [8] BEARING AS-ROLLER  
37. 7Y-0595 [1] SPACER (58X79.6X6-MM THK)  
38. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
43. 8T-6385 M [16] BOLT (M16X2X180-MM)  
44. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
45. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP62060507
 

296-6252: DRIVE GP-SWING

296-6252 DRIVE GP-SWING -WITH MOTOR, LH
S/N GKF1-UP; KLH1-UP
PART OF 227-6042 POWER TRAIN AR
i04562584 SEBP6206
2966252 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4505 Y [1] MOTOR & MTG GP-SWING  
2. 296-6253 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, LH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP62060508
 

296-6253: DRIVE GP-SWING

296-6253 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N GKF1-UP; KLH1-UP
PART OF 296-6252 DRIVE GP-SWING
i04562903 SEBP6206
2966253 DRIVE GP-SWING Parts scheme 2966253 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 4I-7464 [4] GEAR-PLANETARY (25-TEETH)  
3. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
4. 4I-7467 [1] GEAR-RING (72-TEETH)  
5. 6V-7238 [1] VALVE-SHUTOFF  
6. 7I-7728 [1] CARRIER-PLANETARY  
7. 7Y-0597 [1] SPACER-SPECIAL  
8. 7Y-1238 [1] CARRIER  
9. 093-1730 [2] RING-RETAINING  
10. 094-1509 [4] SHAFT-PLANETARY  
11. 094-1528 [8] WASHER (53X84X1-MM THK)  
12. 095-1806 [1] BEARING-ROLLER  
13. 096-2653 [1] RING-RETAINING  
14. 096-4339 [1] BEARING AS-ROLLER  
15. 110-7216 [1] GEAR-SUN (24-TEETH)  
16. 114-1383 [4] SHAFT-PLANETARY  
17. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
18. 114-1399 [1] PIPE-GAUGE  
19. 114-1401 [1] COVER-HOUSING  
20. 114-1403 [1] CAGE  
21. 136-2802 [2] CONNECTOR  
22. 136-2803 [2] CLIP  
23. 169-5534 [1] HOUSING  
24. 169-5535 [1] GEAR-SUN (20-TEETH)  
25. 227-6108 [1] SHAFT-PINION  
26. 227-6215 [1] BOSS (1/4-18-THD)  
27. 296-6251 I [1] HOSE AS  
28. 093-1731 [1] RING-RETAINING  
29. 094-0584 [8] WASHER (40.3X72X1-MM THK)  
30. 199-4582 [4] BEARING AS  
31. 095-0886 [4] PIN-SPRING  
32. 509-6676 [4] PIN-SPRING  
33. 135-9044 [2] SEAL-LIP TYPE  
34. 3K-0360 [1] SEAL-O-RING  
35. 5P-2235 [1] SEAL-O-RING  
36. 191-2513 [8] BEARING AS-ROLLER  
37. 7Y-0595 [1] SPACER (58X79.6X6-MM THK)  
38. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
43. 8T-6385 M [16] BOLT (M16X2X180-MM)  
44. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
45. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP62060509
 

227-6050: FASTENER GP-SWING & FINAL DR

227-6050 FASTENER GP-SWING & FINAL DR
S/N GKF1-UP; KLH1-UP
PART OF 227-6042 POWER TRAIN AR
i04562438 SEBP6206
2276050 FASTENER GP-SWING & FINAL DR Parts scheme 2276050 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [4] CORK  
2. 5D-1026 [2] CLAMP-BAND  
3. 096-4755 [4] PIN  
4. 509-7906 M [20] BOLT (M24X3X70-MM)  
5. 6V-8237 [60] WASHER (26X44X4-MM THK)  
6. 509-7907 M [40] BOLT-HEAD (M24X3X80-MM)  
7. 5P-0767 E HOSE (130-CM EACH)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER PISTON SEAL FOR THE BOOM, STICK, OR BUCKET ON CERTAIN 336D, 336D2, 336E, 336F, 340D, 340D2, 349D, 349D2, 349E, 349F, AND 352F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER PISTON SEAL FOR THE BOOM, STICK, OR BUCKET ON CERTAIN 336D, 336D2, 336E, 336F, 340D, 340D2, 349D, 349D2, 349E, 349F, AND 352F EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Low Cycle Cylinder Rod Breaks on Certain Excavators and Mobile Hydraulic Power Units{7562}
Low Cycle Cylinder Rod Breaks on Certain Excavators and Mobile Hydraulic Power Units{7562}
Specifications
Boom Lines
345D, 349D and 349D2 Excavator Machine System Specifications
Boom Cylinder Lines
345D, 349D and 349D2 Excavator Machine System Specifications
Bucket Cylinder
345D, 349D and 349D2 Excavator Machine System Specifications
Boom Cylinder Lines
345D, 349D and 349D2 Excavator Machine System Specifications
Bucket Cylinder
345D, 349D and 349D2 Excavator Machine System Specifications
Bucket Cylinder
345D, 349D and 349D2 Excavator Machine System Specifications
Cylinder Guard
345D, 349D and 349D2 Excavator Machine System Specifications
Boom Cylinder
345D, 349D and 349D2 Excavator Machine System Specifications
Stick Cylinder
345D, 349D and 349D2 Excavator Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER PISTON SEAL FOR THE BOOM, STICK, OR BUCKET ON CERTAIN 336D, 336D2, 336E, 336F, 340D, 340D2, 349D, 349D2, 349E, 349F, AND 352F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER PISTON SEAL FOR THE BOOM, STICK, OR BUCKET ON CERTAIN 336D, 336D2, 336E, 336F, 340D, 340D2, 349D, 349D2, 349E, 349F, AND 352F EXCAVATORS
Service Letter-Asia
Systems Operation
Cylinders (Boom, Stick and Bucket)
345D, 349D and 349D2 Excavators Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER PISTON SEAL FOR THE BOOM, STICK, OR BUCKET ON CERTAIN 336D, 336D2, 336E, 336F, 340D, 340D2, 349D, 349D2, 349E, 349F, AND 352F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER PISTON SEAL FOR THE BOOM, STICK, OR BUCKET ON CERTAIN 336D, 336D2, 336E, 336F, 340D, 340D2, 349D, 349D2, 349E, 349F, AND 352F EXCAVATORS
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
345D, 349D and 349D2 Excavators Hydraulic System
Cylinder Speed - Check
345D, 349D and 349D2 Excavators Hydraulic System
Cylinder Drift - Check - Loaded Bucket
345D, 349D and 349D2 Excavators Hydraulic System
Relief Valve (Counterweight Cylinder) - Test and Adjust
345D, 349D and 349D2 Excavators Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Boom Cylinder - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Counterweight Cylinder - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Stick Cylinder - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
New Tightening Procedure for the Stick Cylinder Piston Locknut is Available on Certain Excavators and Mobile Hydraulic Power Unit {5458}
New Tightening Procedure for the Stick Cylinder Piston Locknut is Available on Certain Excavators and Mobile Hydraulic Power Unit {5458}
A Procedure for Initial Cycling of Hydraulic Cylinders to Remove Air and Prevent Cylinder Dieseling is Now Being Used on Certain Excavators {5457}
A Procedure for Initial Cycling of Hydraulic Cylinders to Remove Air and Prevent Cylinder Dieseling is Now Being Used on Certain Excavators {5457}
Improved Cylinder Piston Seals Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5458}
Improved Cylinder Piston Seals Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5458}
Improved Cylinder Piston Seals Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458}
Improved Cylinder Piston Seals Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458}
Stick Cylinder Head Bolted Joint Improvement is Now Used on Certain 349D, 349D2, 349E, 349F, and 352F Excavators {5458}
Stick Cylinder Head Bolted Joint Improvement is Now Used on Certain 349D, 349D2, 349E, 349F, and 352F Excavators {5458}

Caterpillar Parts SIS Catalog 349D :

CYLINDER GP-STICK
370-6692 CYLINDER GP-STICK
CYLINDER GP-STICK
370-6692 CYLINDER GP-STICK
CYLINDER GP-STICK
225-4526 CYLINDER GP-STICK
CYLINDER GP-BUCKET
417-2661 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
367-5217 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
358-8503 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
357-9784 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
274-2459 CYLINDER GP-BUCKET
CYLINDER GP-STICK
513-3691 CYLINDER GP-STICK
DRIVE GP-AUXILIARY PUMP
225-4515 DRIVE GP-AUXILIARY PUMP
DRIVE GP-AUXILIARY PUMP
234-4620 DRIVE GP-AUXILIARY PUMP
DRIVE GP-AUXILIARY PUMP
295-9441 DRIVE GP-AUXILIARY PUMP
DRIVE GP-SWING
296-6249 DRIVE GP-SWING
DRIVE GP-SWING
296-6250 DRIVE GP-SWING
DRIVE GP-SWING
296-6252 DRIVE GP-SWING
DRIVE GP-SWING
296-6253 DRIVE GP-SWING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.