259-4965 WIRING GP-FINE SWING S/N GPK1-UP PART OF 343-1128, 447-3394 CHASSIS AR 324D L EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 259-4965 WIRING GP-
1. 336-6225 WIRING GP-
2. 259-4949 WIRING GP-
3. 336-5982 WIRING GP-
4. 350-8236 WIRING GP-
5. 336-6141 WIRING GP-
6. 238-1570 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

7. 333-2906 DRIVE GP-F
8. 333-2907 DRIVE GP-F
9. 353-0494 DRIVE GP-F
0. INFORMATION

EXCAVATOR 324D L EXCAVATOR GPK
324D L Excavator GPK00001-UP (MACHINE) POWERED BY C7 Engine SEBP6208 324D L GPK (2012)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

251-0448 WIRING GP-FAN

291-7460 WIRING GP-FAN

259-4965 WIRING GP-FINE SWING

336-6225 WIRING GP-HAMMER

259-4949 WIRING GP-MEDIUM PRESSURE

336-5982 WIRING GP-PLATFORM

#SEBP62080370

259-4965: WIRING GP-FINE SWING

WIRING GP-FINE SWING

259-4965 WIRING GP-FINE SWING
S/N GPK1-UP
PART OF 343-1128, 447-3394 CHASSIS AR

i02348121 SEBP6208

2594965 WIRING GP-FINE SWING Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-8109	[1]	BRACKET AS
2.	111-4836	[6]	CLIP
3.	111-4837	[2]	CLIP
4.	291-7551	[1]	HARNESS AS-MOTOR
5.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
7.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
	M		METRIC PART

#SEBP62080371

336-6225: WIRING GP-HAMMER

WIRING GP-HAMMER

336-6225 WIRING GP-HAMMER -RETURN FILTER
S/N GPK1-UP
PART OF 346-4458, 415-9038 FILTER AR-HYDRAULIC
AN ATTACHMENT

i04590358 SEBP6208

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[8]	STRAP-CABLE
2.	7K-1181	[8]	STRAP-CABLE
3.	377-8226 C	[1]	HARNESS AS-PUMP
	8T-8737	[1]	PLUG-SEAL
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP62080372

259-4949: WIRING GP-MEDIUM PRESSURE

WIRING GP-MEDIUM PRESSURE

259-4949 WIRING GP-MEDIUM PRESSURE
S/N GPK1-UP
PART OF 255-5833 CONTROL AR-AUXILIARY
AN ATTACHMENT

i02433640 SEBP6208

2594949 WIRING GP-MEDIUM PRESSURE Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181	[5]	STRAP-CABLE
3.	102-7886	[1]	SPACER (11X20X80-MM THK)
4.	267-8019	[1]	HARNESS AS-VALVE
	3S-2093	[1]	STRAP-CABLE
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
5.	132-5789	[1]	CLIP (LADDER)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4198 M	[1]	BOLT (M10X1.5X100-MM)
	M		METRIC PART

#SEBP62080373

336-5982: WIRING GP-PLATFORM

WIRING GP-PLATFORM

336-5982 WIRING GP-PLATFORM
S/N GPK313-UP
PART OF 340-6485, 436-9802 OPERATOR AR

i03663940 SEBP6208

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1S-2342	[1]	STRAP AS-GROUND
2.	3E-5169	[1]	GUARD-SWITCH
3.	3S-2093	[7]	STRAP-CABLE
4.	7K-1181	[17]	STRAP-CABLE
5.	111-4836	[5]	CLIP
6.	111-4838	[2]	CLIP
7.	111-4839	[2]	STRAP
8.	116-0118	[14]	CLIP
9.	234-1122	[1]	COVER
10.	251-0299	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	2L-8074	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
11.	336-5966	[1]	HARNESS AS-PLATFORM
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[26]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	8T-8737	[54]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[13]	TERMINAL (FEMALE)
	9W-0852	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[38]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[33]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(35-CM)
	9X-3402	[66]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8052	[2]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[2]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[26]	PIN-CONNECTOR (16-GA TO 18-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2270	[9]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[2]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[4]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
			(EACH INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	238-2363	[10]	TERMINAL (FEMALE)
	238-2366	[6]	TERMINAL (MALE)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[4]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
14.	7X-2621 M	[7]	BOLT (M10X1.5X12-MM)
15.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
16.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP62080374

350-8236: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

350-8236 WIRING GP-QUICK COUPLER
S/N GPK1-UP
PART OF 344-4454 CONTROL AR-COUPLER
AN ATTACHMENT

i03886130 SEBP6208

3508236 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	7K-1181	[10]	STRAP-CABLE
3.	350-8237	[1]	HARNESS AS-SOLENOID (QUICK COUPLER)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)

#SEBP62080375

336-6141: WIRING GP-RADIO

WIRING GP-RADIO

336-6141 WIRING GP-RADIO
S/N GPK1-UP
12-VOLT
PART OF 359-2277, 421-3497 OPTION AR-CAB
AN ATTACHMENT

i03645896 SEBP6208

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[10]	STRAP-CABLE
4.	116-0118	[1]	CLIP
5.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS RH POSITIVE)
5A.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS RH NEGATIVE)
5B.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS LH POSITIVE)
5C.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS LH NEGATIVE)
6.	170-2512 Y	[1]	SWITCH GP-TOGGLE (SPEAKER)
7.	267-7676	[1]	BRACKET AS
8.	267-7695	[1]	BRACKET AS
9.	283-2984	[1]	COVER
10.	342-2962	[1]	HARNESS AS-RADIO
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[21]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[26]	STRAP-CABLE
	8T-8737	[9]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	149-5051	[4]	CONNECTOR-RECEPTACLE
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[12]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
11.	324-5770	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
12.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
14.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP62080376

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N GPK1-UP
PART OF 454-5556 PUMP AR-FUEL TRANSFER
AN ATTACHMENT

i03087780 SEBP6208

2381570 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	319-1335 C	[1]	HARNESS AS-WIRING
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328 C	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
16.	7K-1181 C	[11]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP62080377

333-2906: DRIVE GP-FINAL

DRIVE GP-FINAL

333-2906 DRIVE GP-FINAL -WITH MOTOR
S/N GPK1-193
PART OF 353-0494 DRIVE GP-FINAL

i04260279 SEBP6208

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	333-2907 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
2.	334-9986 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP62080378

333-2907: DRIVE GP-FINAL

DRIVE GP-FINAL

333-2907 DRIVE GP-FINAL -WITHOUT MOTOR
S/N GPK1-193
PART OF 333-2906 DRIVE GP-FINAL

i04262471 SEBP6208

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
2.	267-6863 B	[1]	SHIM (0.75-MM THK)
	7Y-0752 B	[1]	SHIM (0.8-MM THK)
	267-6864 B	[1]	SHIM (0.85-MM THK)
	267-6865 B	[1]	SHIM (0.9-MM THK)
	267-6866 B	[1]	SHIM (0.95-MM THK)
	7Y-0753 B	[1]	SHIM (1-MM THK)
	267-6867 B	[1]	SHIM (1.2-MM THK)
	267-6868 B	[1]	SHIM (1.4-MM THK)
	7Y-0754 B	[1]	SHIM (1.6-MM THK)
	267-6869 B	[1]	SHIM (1.8-MM THK)
	267-6870 B	[1]	SHIM (2-MM THK)
	267-6871 B	[1]	SHIM (2.3-MM THK)
5.	094-0578 B	[1]	PLATE (8-MM THK)
	094-0579 B	[1]	PLATE (9-MM THK)
	094-0580 B	[1]	PLATE (10-MM THK)
8.	094-1528	[12]	WASHER (53X84X1-MM THK)
9.	114-1540	[4]	PIN-DOWEL
10.	333-2914	[2]	BALL BEARING
11.	169-5589	[1]	GEAR-SUN (24-TEETH)
12.	169-5590	[1]	GEAR-SUN (24-TEETH)
13.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
14.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
15.	169-5601	[3]	SHAFT-PLANETARY
16.	169-5602	[3]	SHAFT-PLANETARY
17.	169-5594	[1]	GEAR-RING (65-TEETH)
18.	333-2916	[3]	BEARING AS
19.	333-2917	[6]	BEARING AS
20.	191-2571	[1]	CARRIER-PLANETARY
21.	191-2676	[1]	GEAR-RING (72-TEETH)
22.	191-2674	[1]	GEAR-SUN (25-TEETH)
23.	191-2675	[3]	GEAR-PLANETARY (20-TEETH)
24.	333-2915	[3]	BEARING AS
25.	191-2678	[1]	CARRIER AS
26.	171-9297	[6]	WASHER (34.3X62X1-MM THK)
28.	199-4503	[1]	COVER
29.	207-1571	[1]	SEAL GP-DUO-CONE
	214-3570	[2]	RING-TORIC
30.	267-6797	[1]	HOUSING-MOTOR
31.	267-6879	[1]	HOUSING (SPROCKET)
32.	267-6799	[1]	CARRIER-PLANETARY
33.	267-6800	[1]	GEAR-COUPLING
43.	093-1731	[2]	RING-RETAINING
44.	095-0891	[6]	PIN-SPRING
45.	096-0433	[3]	RING-RETAINING
46.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
47.	171-9298	[1]	SEAL-O-RING
48.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
49.	7M-8485	[2]	SEAL-O-RING
50.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
51.	7Y-5217 M	[16]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
52.	8T-3282	[16]	WASHER-HARD (22X35X3.5-MM THK)
53.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
54.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
55.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP62080379

353-0494: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0494 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N GPK1-193
PART OF 199-4593 POWER TRAIN AR

i04258494 SEBP6208

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	145-3042 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	333-2906 Y	[1]	DRIVE GP-FINAL (WITH MOTOR)
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery Disconnect Switch
324D and 326D Excavators

Battery or Battery Cable - Inspect/Replace
324D and 326D Excavators

Battery - Recycle
324D and 326D Excavators

Power Receptacle - If Equipped
324D and 326D Excavators

Fuses - Replace
324D and 326D Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Tool Operating Manual

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C7 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
324D and 326D Excavators Hydraulic System

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

A New Console Harness Assembly Is Available for Certain Excavators {1408}
2013/09/25

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

An Improved Starting Motor Is Used on Certain C7 Machine Engines {1408, 1453}
2014/06/06

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

A New Antenna Assembly is Now Available for the ROPS on Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
2014/11/19