WORK TOOLS
BUCKET GPWORK TOOLS
BUCKET GP
#SEBP62170950
439-7332: BUCKET GP-DITCH CLEANING
439-7332 BUCKET GP-DITCH CLEANING
S/N DKD1-UP
1800-MM (72-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY
AN ATTACHMENT
S/N DKD1-UP
1800-MM (72-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY
AN ATTACHMENT
For full view, you need register
Parts for your 314E LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 2. | 439-7364 | [1] | BUCKET AS-DITCH CLEANING | |
| 3. | 441-6631 | [1] | EDGE AS-CUTTING | |
| 3A. | 8J-8141 | [1] | EDGE-CUTTING | |
| 4. | 442-1818 | [1] | EDGE | |
| 5. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 6. | 442-1793 | [2] | PLATE-SIDE BAR | |
| 7. | 442-1795 | [2] | PLATE (CORNER) | |
| 8. | 442-1825 | [1] | PLATE-WEAR | |
| 9. | 442-1826 | [2] | PLATE-WEAR | |
| 10. | 442-1831 | [1] | PLATE AS-HINGE |
#SEBP62170951
439-7333: BUCKET GP-DITCH CLEANING
439-7333 BUCKET GP-DITCH CLEANING
S/N DKD1-UP
2000-MM (78-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY
PART OF 439-7311 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
S/N DKD1-UP
2000-MM (78-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY
PART OF 439-7311 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
For full view, you need register
Parts for your 314E LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 2. | 439-7365 | [1] | BUCKET AS-DITCH CLEANING | |
| 2A. | 442-1819 | [1] | EDGE | |
| 2B. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 2C. | 442-1793 | [2] | PLATE-SIDE BAR | |
| 2D. | 442-1795 | [2] | PLATE (CORNER) | |
| 2E. | 442-1827 | [1] | PLATE-WEAR | |
| 2F. | 442-1828 | [2] | PLATE-WEAR | |
| 2G. | 442-1832 | [1] | PLATE AS-HINGE |
#SEBP62170952
439-7340: BUCKET GP-DITCH CLEANING
439-7340 BUCKET GP-DITCH CLEANING
S/N DKD1-UP
1800-MM (72-IN) WIDE X 0.68-CU M (0.89-CU YD) CAPACITY
PART OF 439-7312 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
S/N DKD1-UP
1800-MM (72-IN) WIDE X 0.68-CU M (0.89-CU YD) CAPACITY
PART OF 439-7312 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
For full view, you need register
Parts for your 314E LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 2. | 439-7369 | [1] | BUCKET AS-DITCH CLEANING | |
| 2A. | 442-1826 | [2] | PLATE-WEAR | |
| 2B. | 442-1847 | [1] | EDGE | |
| 2C. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 2D. | 442-1795 | [2] | PLATE (CORNER) | |
| 2E. | 442-1855 | [2] | PLATE-SIDE BAR | |
| 2F. | 442-1858 | [1] | PLATE-WEAR | |
| 2G. | 442-1860 | [1] | PLATE AS-HINGE |
#SEBP62170953
439-7355: BUCKET GP-DITCH CLEANING
439-7355 BUCKET GP-DITCH CLEANING
S/N DKD1-UP
1800-MM (72-IN) WIDE X 0.68-CU M (0.89-CU YD) CAPACITY
PART OF 442-1786 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
S/N DKD1-UP
1800-MM (72-IN) WIDE X 0.68-CU M (0.89-CU YD) CAPACITY
PART OF 442-1786 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
For full view, you need register
Parts for your 314E LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 2. | 439-7398 | [1] | BUCKET AS-DITCH CLEANING | |
| 3. | 442-1826 | [2] | PLATE-WEAR | |
| 4. | 442-1847 | [1] | EDGE | |
| 5. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 6. | 442-1795 | [2] | PLATE (CORNER) | |
| 7. | 442-1855 | [2] | PLATE-SIDE BAR | |
| 8. | 442-1858 | [1] | PLATE-WEAR | |
| 9. | 442-1862 | [1] | PLATE AS-HINGE |
#SEBP62170954
484-0198: BUCKET GP-DITCH CLEANING
484-0198 BUCKET GP-DITCH CLEANING
S/N DKD1-UP
1800-MM (72-IN) WIDE X 0.6-CU M (0.78-CU YD) CAPACITY
Type 1
AN ATTACHMENT
S/N DKD1-UP
1800-MM (72-IN) WIDE X 0.6-CU M (0.78-CU YD) CAPACITY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 314E LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| 2. | 485-4862 | [1] | PIVOT AS | |
| 2A. | 9R-2821 M | [5] | BOSS (M10X1.5X15-MM) | |
| 2B. | 484-5091 | [2] | BUSHING | |
| 3. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 159-8035 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK) | |
| 5. | 159-8036 | [1] | FILM-WARNING (READ OMM) | |
| 7. | 484-1381 | [1] | PIN AS | |
| 8. | 484-1382 | [2] | PIN AS | |
| 9. | 484-1383 Y | [1] | PIN GP-BUCKET | |
| 10. | 484-2102 Y | [1] | CYLINDER GP-BUCKET (LH) | |
| 11. | 484-2103 Y | [1] | CYLINDER GP-BUCKET (RH) | |
| 12. | 484-8127 | [1] | SPACER (35X90X3-MM THK) | |
| 14. | Y | [1] | LINES GP-BUCKET TILT CYLINDER | |
| 15. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 16. | 8T-4222 | [2] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 17. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 18. | 476-2386 | [1] | BUCKET AS-DITCH CLEANING | |
| 19. | 442-1818 | [1] | EDGE | |
| 20. | 482-7577 | [1] | GUSSET (LH) | |
| 21. | 482-7578 | [1] | GUSSET (RH) | |
| 22. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 23. | 442-1795 | [2] | PLATE (CORNER) | |
| 24. | 485-5432 | [1] | PLATE AS-HINGE | |
| 25. | 485-7993 | [1] | EDGE | |
| 26. | 9R-2821 M | [4] | BOSS (M10X1.5X15-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP62170955
484-0198: BUCKET GP-DITCH CLEANING
484-0198 BUCKET GP-DITCH CLEANING
S/N DKD1-UP
1800-MM (72-IN) WIDE X 0.6-CU M (0.78-CU YD) CAPACITY
Type 2
AN ATTACHMENT
S/N DKD1-UP
1800-MM (72-IN) WIDE X 0.6-CU M (0.78-CU YD) CAPACITY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 314E LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| 2. | 485-4862 | [1] | PIVOT AS | |
| 2A. | 9R-2821 M | [5] | BOSS (M10X1.5X15-MM) | |
| 2B. | 484-5091 | [2] | BUSHING | |
| 3. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 159-8035 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK) | |
| 5. | 159-8036 | [1] | FILM-WARNING (READ OMM) | |
| 7. | 498-8995 C | [1] | PIN AS | |
| 8. | 498-8996 C | [2] | PIN AS | |
| 9. | 498-8997 CY | [1] | PIN GP-BUCKET | |
| 10. | 484-2102 Y | [1] | CYLINDER GP-BUCKET (LH) | |
| 11. | 484-2103 Y | [1] | CYLINDER GP-BUCKET (RH) | |
| 12. | 484-8127 | [1] | SPACER (35X90X3-MM THK) | |
| 14. | CY | [1] | LINES GP-BUCKET TILT CYLINDER | |
| 15. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 16. | 8T-4222 | [2] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 17. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 18. | 476-2386 | [1] | BUCKET AS-DITCH CLEANING | |
| 19. | 442-1818 | [1] | EDGE | |
| 20. | 482-7577 | [1] | GUSSET (LH) | |
| 21. | 482-7578 | [1] | GUSSET (RH) | |
| 22. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 23. | 442-1795 | [2] | PLATE (CORNER) | |
| 24. | 485-5432 | [1] | PLATE AS-HINGE | |
| 25. | 485-7993 | [1] | EDGE | |
| 26. | 9R-2821 M | [4] | BOSS (M10X1.5X15-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP62170956
484-0199: BUCKET GP-DITCH CLEANING
484-0199 BUCKET GP-DITCH CLEANING
S/N DKD1-UP
2000-MM (79-IN) WIDE X 0.67-CU M (0.88-CU YD) CAPACITY
Type 1
AN ATTACHMENT
S/N DKD1-UP
2000-MM (79-IN) WIDE X 0.67-CU M (0.88-CU YD) CAPACITY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 314E LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| 2. | 485-4862 | [1] | PIVOT AS | |
| 2A. | 484-5091 | [2] | BUSHING | |
| 3. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 159-8035 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK) | |
| 5. | 159-8036 | [1] | FILM-WARNING (READ OMM) | |
| 7. | 484-1381 | [1] | PIN AS | |
| 8. | 484-1382 | [2] | PIN AS | |
| 9. | 484-1383 Y | [1] | PIN GP-BUCKET | |
| 10. | 484-2102 Y | [1] | CYLINDER GP-BUCKET (LH) | |
| 11. | 484-2103 Y | [1] | CYLINDER GP-BUCKET (RH) | |
| 12. | 484-8127 | [1] | SPACER (35X90X3-MM THK) | |
| 14. | Y | [1] | LINES GP-BUCKET TILT CYLINDER | |
| 15. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 16. | 8T-4222 | [2] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 17. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 18. | 476-2387 | [1] | BUCKET AS-DITCH CLEANING | |
| 19. | 482-7577 | [1] | GUSSET (LH) | |
| 20. | 482-7578 | [1] | GUSSET (RH) | |
| 21. | 485-9710 | [1] | EDGE | |
| 22. | 490-2816 | [1] | EDGE-BASE | |
| 23. | 490-4934 | [1] | PLATE AS-HINGE | |
| 24. | 9R-2821 M | [4] | BOSS (M10X1.5X15-MM) | |
| 25. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 26. | 442-1795 | [2] | PLATE (CORNER) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP62170957
484-0199: BUCKET GP-DITCH CLEANING
484-0199 BUCKET GP-DITCH CLEANING
S/N DKD1-UP
2000-MM (79-IN) WIDE X 0.67-CU M (0.88-CU YD) CAPACITY
Type 2
AN ATTACHMENT
S/N DKD1-UP
2000-MM (79-IN) WIDE X 0.67-CU M (0.88-CU YD) CAPACITY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 314E LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| 2. | 485-4862 | [1] | PIVOT AS | |
| 2A. | 484-5091 | [2] | BUSHING | |
| 2B. | 9R-2821 M | [5] | BOSS (M10X1.5X15-MM) | |
| 3. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 159-8035 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK) | |
| 5. | 159-8036 | [1] | FILM-WARNING (READ OMM) | |
| 7. | 498-8995 C | [1] | PIN AS | |
| 8. | 498-8996 C | [2] | PIN AS | |
| 9. | 498-8997 CY | [1] | PIN GP-BUCKET | |
| 10. | 484-2102 Y | [1] | CYLINDER GP-BUCKET (LH) | |
| 11. | 484-2103 Y | [1] | CYLINDER GP-BUCKET (RH) | |
| 12. | 484-8127 | [1] | SPACER (35X90X3-MM THK) | |
| 14. | CY | [1] | LINES GP-BUCKET TILT CYLINDER | |
| 15. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 16. | 8T-4222 | [2] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 17. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 18. | 476-2387 | [1] | BUCKET AS-DITCH CLEANING | |
| 19. | 482-7577 | [1] | GUSSET (LH) | |
| 20. | 482-7578 | [1] | GUSSET (RH) | |
| 21. | 485-9710 | [1] | EDGE | |
| 22. | 490-2816 | [1] | EDGE-BASE | |
| 23. | 490-4934 | [1] | PLATE AS-HINGE | |
| 24. | 9R-2821 M | [4] | BOSS (M10X1.5X15-MM) | |
| 25. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 26. | 442-1795 | [2] | PLATE (CORNER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP62170958
358-8652: BUCKET GP-GENERAL PURPOSE
358-8652 BUCKET GP-GENERAL PURPOSE -QUICK COUPLER
S/N DKD1-UP
1100-MM (43-IN) WIDE X 0.7-CU-M (0.9-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 6
AN ATTACHMENT
S/N DKD1-UP
1100-MM (43-IN) WIDE X 0.7-CU-M (0.9-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 6
AN ATTACHMENT
For full view, you need register
Parts for your 314E LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 2. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 3. | 358-8656 | [1] | BUCKET AS-GENERAL PURPOSE | |
| 4. | 354-5807 | [1] | PLATE (LH) | |
| 5. | 354-5813 | [2] | PLATE-WEAR | |
| 6. | 354-5811 | [1] | PLATE (RH) | |
| 7. | 359-5026 | [1] | EDGE AS | |
| 7A. | 8P-9770 | [1] | PLATE | |
| 7B. | 119-3253 | [6] | ADAPTER-TIP (J-250, 2-STRAP) | |
| 8. | 359-5028 | [1] | PLATE-WEAR | |
| 9. | 359-5029 | [3] | PLATE-WEAR | |
| 10. | 375-7758 | [1] | PLATE AS-HINGE |
#SEBP62170959
358-8660: BUCKET GP-GENERAL PURPOSE
358-8660 BUCKET GP-GENERAL PURPOSE
S/N DKD1-UP
450-MM (18-IN) WIDE X 0.20-CU M (0.27-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 3
AN ATTACHMENT
S/N DKD1-UP
450-MM (18-IN) WIDE X 0.20-CU M (0.27-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 3
AN ATTACHMENT
For full view, you need register
Parts for your 314E LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 2. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 3. | 358-8668 | [1] | BUCKET AS-GENERAL PURPOSE | |
| 4. | 375-7277 | [1] | PLATE (RH) | |
| 5. | 370-4415 | [3] | PLATE-WEAR | |
| 6. | 370-4396 | [1] | EDGE AS | |
| 6A. | 119-3253 | [3] | ADAPTER-TIP (J-250, 2-STRAP) | |
| 6B. | 8P-9770 | [1] | PLATE | |
| 7. | 370-4410 | [1] | PLATE-WEAR | |
| 8. | 354-5813 | [2] | PLATE-WEAR | |
| 9. | 375-7276 | [1] | PLATE (LH) |
Information:
Caterpillar Parts SIS Catalog 314E LCR :
Truck sale:
72,250
76,096
