AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

387-9676 THUMB GP -PIN ON, 4-TOOTH S/N THC1-UP FULL ROTATION FOR USE WITH 1067-MM (42-IN) BUCKET HYDRAULIC


WORK TOOLS
THUMB GP

THUMB HYDRAULIC THUMB THC
 Hydraulic Thumbs THC00001-UP (MACHINE) SEBP6230 HYDRAULIC THC   (2012)

WORK TOOLS

THUMB GP
THUMB GP
387-9672 THUMB GP
THUMB GP
387-9674 THUMB GP
THUMB GP
387-9676 THUMB GP
THUMB GP
387-9678 THUMB GP
THUMB GP
387-9682 THUMB GP
THUMB GP
387-9684 THUMB GP
 

#SEBP62300020
 

387-9676: THUMB GP

387-9676 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i04818197 SEBP6230
3879676 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9R-5438 [2] WASHER (51X82X2-MM THK)  
4. 157-7257 [1] RETAINER  
5. 160-7887 [1] LINK AS  
6. 161-2939 [1] SPACER  
7. 185-8079 [1] PIN  
8. 387-9677 [1] THUMB AS  
8A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
8B. 117-9432 [2] BUSHING  
8C. 391-3847 [2] CAP-RETAINER  
9. 390-9422 Y [1] CYLINDER GP-THUMB  
10. 391-3821 [1] LINK AS-IDLER (RH)  
10A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
10B. 157-4552 [1] BEARING  
11. 391-3822 [1] LINK AS-IDLER (LH)  
11A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
11B. 157-4552 [1] BEARING  
12. 391-3823 [1] LINK AS  
12A. 4V-4445 [4] BUSHING  
13. 391-3824 [1] PIN AS  
14. 391-3825 [2] PIN AS  
16. 391-3834 [2] PLATE-CAP  
17. 391-3835 [1] PIN  
18. 391-3836 B [5] PLATE-SHIM  
19. 391-3850 [1] PIN  
20. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
21. 332-4695 M [4] NUT (M8X1.25-THD)  
22. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
23. 6Y-2266 [2] PIN  
24. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
25. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
26. 7X-2559 M [1] BOLT (M16X2X160-MM)  
27. 8T-4174 M [1] BOLT (M16X2X120-MM)  
28. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
29. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
30. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
31. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
32. 159-8036 [1] FILM-WARNING (READ OMM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300021
 

387-9678: THUMB GP

387-9678 THUMB GP -PIN ON, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i04818202 SEBP6230
3879678 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9R-5438 [2] WASHER (51X82X2-MM THK)  
4. 157-7257 [1] RETAINER  
5. 160-7887 [1] LINK AS  
6. 161-2939 [1] SPACER  
7. 185-8079 [1] PIN  
8. 387-9679 [1] THUMB AS  
8A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
8B. 117-9432 [2] BUSHING  
8C. 391-3847 [2] CAP-RETAINER  
9. 390-9422 Y [1] CYLINDER GP-THUMB  
10. 391-3821 [1] LINK AS-IDLER (RH)  
10A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
10B. 157-4552 [1] BEARING  
11. 391-3822 [1] LINK AS-IDLER (LH)  
11A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
11B. 157-4552 [1] BEARING  
12. 391-3823 [1] LINK AS  
12A. 4V-4445 [4] BUSHING  
13. 391-3824 [1] PIN AS  
14. 391-3825 [2] PIN AS  
16. 391-3834 [2] PLATE-CAP  
17. 391-3835 [1] PIN  
18. 391-3836 B [5] PLATE-SHIM  
19. 391-3850 [1] PIN  
20. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
21. 332-4695 M [4] NUT (M8X1.25-THD)  
22. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
23. 6Y-2266 [2] PIN  
24. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
25. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
26. 7X-2559 M [1] BOLT (M16X2X160-MM)  
27. 8T-4174 M [1] BOLT (M16X2X120-MM)  
28. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
29. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
30. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
31. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
32. 159-8036 [1] FILM-WARNING (READ OMM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300022
 

387-9682: THUMB GP

387-9682 THUMB GP -PIN GRABBER, 3-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 762-MM (30-IN) BUCKET
i04818233 SEBP6230
3879682 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9R-5438 [2] WASHER (51X82X2-MM THK)  
4. 157-7257 [1] RETAINER  
5. 160-7887 [1] LINK AS  
6. 185-8079 [1] PIN  
7. 263-1449 [1] PIN  
8. 387-9683 [1] THUMB AS  
8A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
8B. 117-9432 [2] BUSHING  
8C. 391-3847 [2] CAP-RETAINER  
9. 390-9422 Y [1] CYLINDER GP-THUMB  
10. 391-3821 [1] LINK AS-IDLER (RH)  
10A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
10B. 157-4552 [1] BEARING  
11. 391-3822 [1] LINK AS-IDLER (LH)  
11A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
11B. 157-4552 [1] BEARING  
12. 391-3823 [1] LINK AS  
12A. 4V-4445 [4] BUSHING  
13. 391-3824 [1] PIN AS  
14. 391-3825 [2] PIN AS  
16. 391-3834 [2] PLATE-CAP  
17. 391-3835 [1] PIN  
18. 391-3836 B [4] PLATE-SHIM  
19. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
20. 332-4695 M [4] NUT (M8X1.25-THD)  
21. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
22. 6Y-2266 [2] PIN  
23. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
24. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
25. 8T-4174 M [1] BOLT (M16X2X120-MM)  
26. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
27. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
28. 8T-6385 M [1] BOLT (M16X2X180-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
31. 159-8036 [1] FILM-WARNING (READ OMM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300023
 

387-9684: THUMB GP

387-9684 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i04818268 SEBP6230
3879684 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9R-5438 [2] WASHER (51X82X2-MM THK)  
4. 157-7257 [1] RETAINER  
5. 160-7887 [1] LINK AS  
6. 185-8079 [1] PIN  
7. 263-1449 [1] PIN  
8. 387-9685 [1] THUMB AS  
8A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
8B. 117-9432 [2] BUSHING  
8C. 391-3847 [2] CAP-RETAINER  
9. 390-9422 Y [1] CYLINDER GP-THUMB  
10. 391-3821 [1] LINK AS-IDLER (RH)  
10A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
10B. 157-4552 [1] BEARING  
11. 391-3822 [1] LINK AS-IDLER (LH)  
11A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
11B. 157-4552 [1] BEARING  
12. 391-3823 [1] LINK AS  
12A. 4V-4445 [4] BUSHING  
13. 391-3824 [1] PIN AS  
14. 391-3825 [2] PIN AS  
16. 391-3834 [2] PLATE-CAP  
17. 391-3835 [1] PIN  
18. 391-3836 B [4] PLATE-SHIM  
19. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
20. 332-4695 M [4] NUT (M8X1.25-THD)  
21. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
22. 6Y-2266 [2] PIN  
23. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
24. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
25. 8T-4174 M [1] BOLT (M16X2X120-MM)  
26. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
27. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
28. 8T-6385 M [1] BOLT (M16X2X180-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
31. 159-8036 [1] FILM-WARNING (READ OMM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300024
 

387-9686: THUMB GP

387-9686 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i04818480 SEBP6230
3879686 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9R-5438 [2] WASHER (51X82X2-MM THK)  
4. 157-7257 [1] RETAINER  
5. 160-7887 [1] LINK AS  
6. 185-8079 [1] PIN  
7. 263-1449 [1] PIN  
8. 387-9687 [1] THUMB AS  
8A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
8B. 117-9432 [2] BUSHING  
8C. 391-3847 [2] CAP-RETAINER  
9. 390-9422 Y [1] CYLINDER GP-THUMB  
10. 391-3821 [1] LINK AS-IDLER (RH)  
10A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
10B. 157-4552 [1] BEARING  
11. 391-3822 [1] LINK AS-IDLER (LH)  
11A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
11B. 157-4552 [1] BEARING  
12. 391-3823 [1] LINK AS  
12A. 4V-4445 [4] BUSHING  
13. 391-3824 [1] PIN AS  
14. 391-3825 [2] PIN AS  
16. 391-3834 [2] PLATE-CAP  
17. 391-3835 [1] PIN  
18. 391-3836 B [4] PLATE-SHIM  
19. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
20. 332-4695 M [4] NUT (M8X1.25-THD)  
21. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
22. 6Y-2266 [2] PIN  
23. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
24. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
25. 8T-4174 M [1] BOLT (M16X2X120-MM)  
26. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
27. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
28. 8T-6385 M [1] BOLT (M16X2X180-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
31. 159-8036 [1] FILM-WARNING (READ OMM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300025
 

387-9688: THUMB GP

387-9688 THUMB GP -PIN-GRABBER, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i04818519 SEBP6230
3879688 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9R-5438 [2] WASHER (51X82X2-MM THK)  
4. 157-7257 [1] RETAINER  
5. 160-7887 [1] LINK AS  
6. 185-8079 [1] PIN  
7. 263-1449 [1] PIN  
8. 387-9689 [1] THUMB AS  
8A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
8B. 117-9432 [2] BUSHING  
8C. 391-3847 [2] CAP-RETAINER  
9. 390-9422 Y [1] CYLINDER GP-THUMB  
10. 391-3821 [1] LINK AS-IDLER (RH)  
10A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
10B. 157-4552 [1] BEARING  
11. 391-3822 [1] LINK AS-IDLER (LH)  
11A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
11B. 157-4552 [1] BEARING  
12. 391-3823 [1] LINK AS  
12A. 4V-4445 [4] BUSHING  
13. 391-3824 [1] PIN AS  
14. 391-3825 [2] PIN AS  
16. 391-3834 [2] PLATE-CAP  
17. 391-3835 [1] PIN  
18. 391-3836 B [4] PLATE-SHIM  
19. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
20. 332-4695 M [4] NUT (M8X1.25-THD)  
21. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
22. 6Y-2266 [2] PIN  
23. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
24. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
25. 8T-4174 M [1] BOLT (M16X2X120-MM)  
26. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
27. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
28. 8T-6385 M [1] BOLT (M16X2X180-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
31. 159-8036 [1] FILM-WARNING (READ OMM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300026
 

387-9692: THUMB GP

387-9692 THUMB GP -PIN ON, 3-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 762-MM (30-IN) BUCKET
i04818763 SEBP6230
3879692 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 161-2939 [1] SPACER  
4. 185-8079 [1] PIN  
5. 387-9673 [1] THUMB AS  
5A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
5B. 117-9432 [2] BUSHING  
5C. 391-3847 [2] CAP-RETAINER  
6. 390-9423 Y [1] CYLINDER GP-THUMB  
7. 391-3834 [2] PLATE-CAP  
8. 391-3835 [1] PIN  
9. 391-3836 B [5] PLATE-SHIM  
10. 391-3850 [1] PIN  
11. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
12. 332-4695 M [4] NUT (M8X1.25-THD)  
13. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
14. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
15. 7X-2559 M [1] BOLT (M16X2X160-MM)  
16. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
17. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
18. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
19. 268-4530 [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (LOCATED INSIDE CAB OF MACHINE)
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300027
 

387-9694: THUMB GP

387-9694 THUMB GP -PIN ON, 4-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i04818792 SEBP6230
3879694 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 391-3835 [1] PIN  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 161-2939 [1] SPACER  
5. 185-8079 [1] PIN  
6. 391-3850 [1] PIN  
7. 391-3836 B [5] PLATE-SHIM  
8. 391-3834 [2] PLATE-CAP  
9. 387-9675 [1] THUMB AS  
9A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
9B. 117-9432 [2] BUSHING  
9C. 391-3847 [2] CAP-RETAINER  
10. 390-9423 Y [1] CYLINDER GP-THUMB  
11. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
12. 332-4695 M [4] NUT (M8X1.25-THD)  
13. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
14. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
15. 7X-2559 M [1] BOLT (M16X2X160-MM)  
16. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
17. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
18. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
19. 268-4530 [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (LOCATED INSIDE CAB OF MACHINE)
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300028
 

387-9696: THUMB GP

387-9696 THUMB GP -PIN ON, 4-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i04818797 SEBP6230
3879696 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 161-2939 [1] SPACER  
4. 185-8079 [1] PIN  
5. 387-9677 [1] THUMB AS  
5A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
5B. 117-9432 [2] BUSHING  
5C. 391-3847 [2] CAP-RETAINER  
6. 390-9423 Y [1] CYLINDER GP-THUMB  
7. 391-3834 [2] PLATE-CAP  
8. 391-3835 [1] PIN  
9. 391-3836 B [5] PLATE-SHIM  
10. 391-3850 [1] PIN  
11. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
12. 332-4695 M [4] NUT (M8X1.25-THD)  
13. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
14. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
15. 7X-2559 M [1] BOLT (M16X2X160-MM)  
16. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
17. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
18. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
19. 268-4530 [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (LOCATED INSIDE CAB OF MACHINE)
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300029
 

387-9698: THUMB GP

387-9698 THUMB GP -PIN ON, 5-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i04818803 SEBP6230
3879698 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 161-2939 [1] SPACER  
4. 185-8079 [1] PIN  
5. 387-9679 [1] THUMB AS  
5A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
5B. 117-9432 [2] BUSHING  
5C. 391-3847 [2] CAP-RETAINER  
6. 390-9423 Y [1] CYLINDER GP-THUMB  
7. 391-3834 [2] PLATE-CAP  
8. 391-3835 [1] PIN  
9. 391-3836 B [5] PLATE-SHIM  
10. 391-3850 [1] PIN  
11. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
12. 332-4695 M [4] NUT (M8X1.25-THD)  
13. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
14. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
15. 7X-2559 M [1] BOLT (M16X2X160-MM)  
16. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
17. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
18. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
19. 268-4530 [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (LOCATED INSIDE CAB OF MACHINE)
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Thumb - Lubricate
Hydraulic Thumbs
Stop - Inspect/Replace
Hydraulic Thumbs
Special Instruction
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the <NOBR>418-0310</NOBR> Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0310 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}

Caterpillar Parts SIS Catalog HYDRAULIC :

THUMB GP
387-9674 THUMB GP
THUMB GP
387-9672 THUMB GP
PLATE & BOSS GP-COUPLER
449-4688 PLATE & BOSS GP-COUPLER
PLATE & BOSS GP-COUPLER
437-7403 PLATE & BOSS GP-COUPLER
INSTALLATION GP-FIELD
456-4554 INSTALLATION GP-FIELD
INSTALLATION GP-FIELD
456-4553 INSTALLATION GP-FIELD
INSTALLATION GP-FIELD
456-4552 INSTALLATION GP-FIELD
INSTALLATION GP-FIELD
456-4551 INSTALLATION GP-FIELD
THUMB GP
387-9678 THUMB GP
THUMB GP
387-9682 THUMB GP
THUMB GP
387-9684 THUMB GP
THUMB GP
387-9686 THUMB GP
THUMB GP
387-9688 THUMB GP
THUMB GP
387-9692 THUMB GP
THUMB GP
387-9694 THUMB GP
THUMB GP
387-9696 THUMB GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.