AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

387-9770 THUMB GP -PIN GRABBER, 4-TOOTH S/N THD1-UP PARTIAL ROTATION FOR USE WITH 914-MM (36-IN) BUCKET HYDRAULIC


WORK TOOLS
THUMB GP

THUMB HYDRAULIC THUMB THC
 Hydraulic Thumbs THC00001-UP (MACHINE) SEBP6230 HYDRAULIC THC   (2012)

WORK TOOLS

THUMB GP
THUMB GP
387-9766 THUMB GP
THUMB GP
387-9768 THUMB GP
THUMB GP
387-9770 THUMB GP
THUMB GP
387-9772 THUMB GP
THUMB GP
418-0278 THUMB GP
THUMB GP
418-0280 THUMB GP
 

#SEBP62300060
 

387-9770: THUMB GP

387-9770 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i04818901 SEBP6230
3879770 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 096-4876 M [2] NUT (M14X2-THD)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 185-8079 [1] PIN  
5. 248-5474 M [1] BOLT (M14X2X160-MM)  
6. 378-5575 Y [1] CYLINDER GP-THUMB  
7. 379-7002 [1] PIN  
8. 387-9739 [1] THUMB AS  
8A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
8B. 099-0721 [2] BUSHING  
8C. 391-3847 [2] CAP-RETAINER  
9. 391-3834 [2] PLATE-CAP  
10. 392-3640 B [4] PLATE-SHIM  
11. 392-3641 [1] PIN (STICK)  
12. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
13. 332-4695 M [4] NUT (M8X1.25-THD)  
14. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
15. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
16. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
17. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
18. 268-4530 [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (LOCATED INSIDE CAB OF MACHINE)
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300061
 

387-9772: THUMB GP

387-9772 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i04818905 SEBP6230
3879772 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 185-8079 [1] PIN  
4. 378-5575 Y [1] CYLINDER GP-THUMB  
5. 379-7002 [1] PIN  
6. 387-9741 [1] THUMB AS  
6A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
6B. 099-0721 [2] BUSHING  
6C. 391-3847 [2] CAP-RETAINER  
7. 391-3834 [2] PLATE-CAP  
8. 392-3640 B [4] PLATE-SHIM  
9. 392-3641 [1] PIN (STICK)  
10. 096-4876 M [2] NUT (M14X2-THD)  
11. 248-5474 M [1] BOLT (M14X2X160-MM)  
12. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
13. 332-4695 M [4] NUT (M8X1.25-THD)  
14. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
15. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
16. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
17. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
18. 268-4530 [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (LOCATED INSIDE CAB OF MACHINE)
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300062
 

418-0278: THUMB GP

418-0278 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i05080969 SEBP6230
4180278 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 137-8479 [4] SHIM (2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
6. 299-6748 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 386-4110 [1] PIN  
12. 386-9500 [1] PIN AS  
13. 387-0277 [1] LINK AS-IDLER (RH)  
13A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
13B. 157-4552 [1] BEARING  
14. 387-0278 [1] LINK AS-IDLER (LH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 387-0279 [1] LINK AS (CENTER)  
15A. 7Y-5131 [2] BUSHING  
15B. 117-9432 [2] BUSHING  
16. 387-0280 [2] PIN AS  
17. 394-1764 [1] PIN  
18. 417-0223 Y [1] CYLINDER GP-THUMB  
19. 418-0279 [1] THUMB AS  
19A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
19B. 240-2912 [2] BUSHING  
19C. 384-3956 [2] CAP-RETAINER  
20. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
21. 332-4695 M [4] NUT (M8X1.25-THD)  
22. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT INSIDE CAB OF THE MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300063
 

418-0280: THUMB GP

418-0280 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1077-MM (42-IN) BUCKET
i05081331 SEBP6230
4180280 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 137-8479 [4] SHIM (2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
6. 299-6748 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 386-4110 [1] PIN  
12. 386-9500 [1] PIN AS  
13. 387-0277 [1] LINK AS-IDLER (RH)  
13A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
13B. 157-4552 [1] BEARING  
14. 387-0278 [1] LINK AS-IDLER (LH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 387-0279 [1] LINK AS (CENTER)  
15A. 7Y-5131 [2] BUSHING  
15B. 117-9432 [2] BUSHING  
16. 387-0280 [2] PIN AS  
17. 394-1764 [1] PIN  
18. 417-0223 Y [1] CYLINDER GP-THUMB  
19. 418-0281 [1] THUMB AS  
19A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
19B. 240-2912 [2] BUSHING  
19C. 384-3956 [2] CAP-RETAINER  
20. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
21. 332-4695 M [4] NUT (M8X1.25-THD)  
22. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT INSIDE CAB OF THE MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300064
 

418-0282: THUMB GP

418-0282 THUMB GP -PIN-ON, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i05081349 SEBP6230
4180282 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 222-7101 [2] WASHER (71X130X3-MM THK)  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 299-6748 [1] LINK AS  
8. 384-3910 [2] PLATE AS-STOP  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 386-4110 [1] PIN  
13. 386-9500 [1] PIN AS  
14. 387-0277 [1] LINK AS-IDLER (RH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 387-0278 [1] LINK AS-IDLER (LH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 387-0279 [1] LINK AS (CENTER)  
16A. 7Y-5131 [2] BUSHING  
16B. 117-9432 [2] BUSHING  
17. 387-0280 [2] PIN AS  
18. 394-1764 [1] PIN  
19. 417-0223 Y [1] CYLINDER GP-THUMB  
20. 418-0283 [1] THUMB AS  
20A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
20B. 240-2912 [2] BUSHING  
20C. 384-3956 [2] CAP-RETAINER  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT INSIDE CAB OF THE MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300065
 

418-0284: THUMB GP

418-0284 THUMB GP -PIN ON, 6-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1321-MM (52-IN) BUCKET
i05081929 SEBP6230
4180284 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 222-7101 [2] WASHER (71X130X3-MM THK)  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 299-6748 [1] LINK AS  
8. 384-3910 [2] PLATE AS-STOP  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 386-4110 [1] PIN  
13. 386-9500 [1] PIN AS  
14. 387-0277 [1] LINK AS-IDLER (RH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 387-0278 [1] LINK AS-IDLER (LH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 387-0279 [1] LINK AS (CENTER)  
16A. 7Y-5131 [2] BUSHING  
16B. 117-9432 [2] BUSHING  
17. 387-0280 [2] PIN AS  
18. 394-1764 [1] PIN  
19. 417-0223 Y [1] CYLINDER GP-THUMB  
20. 418-0285 [1] THUMB AS  
20A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
20B. 240-2912 [2] BUSHING  
20C. 384-3956 [2] CAP-RETAINER  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT INSIDE CAB OF THE MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300066
 

418-0286: THUMB GP

418-0286 THUMB GP -PIN GRABBER, 2-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i05082869 SEBP6230
4180286 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 137-8479 [4] SHIM (2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
6. 299-6748 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 484-2149 [1] PIN  
12. 386-9500 [1] PIN AS  
13. 387-0277 [1] LINK AS-IDLER (RH)  
13A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
13B. 157-4552 [1] BEARING  
14. 387-0278 [1] LINK AS-IDLER (LH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 387-0279 [1] LINK AS (CENTER)  
15A. 7Y-5131 [2] BUSHING  
15B. 117-9432 [2] BUSHING  
16. 387-0280 [2] PIN AS  
17. 394-1764 [1] PIN  
18. 417-0223 Y [1] CYLINDER GP-THUMB  
19. 418-0287 [1] THUMB AS  
19A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
19B. 240-2912 [2] BUSHING  
19C. 384-3956 [2] CAP-RETAINER  
20. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
21. 332-4695 M [4] NUT (M8X1.25-THD)  
22. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT INSIDE CAB OF THE MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300067
 

418-0288: THUMB GP

418-0288 THUMB GP -PIN GRABBER, 2-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i05082889 SEBP6230
4180288 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 137-8479 [4] SHIM (2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
6. 299-6748 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 484-2149 [1] PIN  
12. 386-9500 [1] PIN AS  
13. 387-0277 [1] LINK AS-IDLER (RH)  
13A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
13B. 157-4552 [1] BEARING  
14. 387-0278 [1] LINK AS-IDLER (LH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 387-0279 [1] LINK AS (CENTER)  
15A. 7Y-5131 [2] BUSHING  
15B. 117-9432 [2] BUSHING  
16. 387-0280 [2] PIN AS  
17. 394-1764 [1] PIN  
18. 417-0223 Y [1] CYLINDER GP-THUMB  
19. 418-0289 [1] THUMB AS  
19A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
19B. 240-2912 [2] BUSHING  
19C. 384-3956 [2] CAP-RETAINER  
20. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
21. 332-4695 M [4] NUT (M8X1.25-THD)  
22. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT INSIDE CAB OF THE MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300068
 

418-0290: THUMB GP

418-0290 THUMB GP -PIN GRABBER, 2-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i05082899 SEBP6230
4180290 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 137-8479 [4] SHIM (2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
6. 299-6748 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 484-2149 [1] PIN  
12. 386-9500 [1] PIN AS  
13. 387-0277 [1] LINK AS-IDLER (RH)  
13A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
13B. 157-4552 [1] BEARING  
14. 387-0278 [1] LINK AS-IDLER (LH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 387-0279 [1] LINK AS (CENTER)  
15A. 7Y-5131 [2] BUSHING  
15B. 117-9432 [2] BUSHING  
16. 387-0280 [2] PIN AS  
17. 394-1764 [1] PIN  
18. 417-0223 Y [1] CYLINDER GP-THUMB  
19. 418-0291 [1] THUMB AS  
19A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
19B. 240-2912 [2] BUSHING  
19C. 384-3956 [2] CAP-RETAINER  
20. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
21. 332-4695 M [4] NUT (M8X1.25-THD)  
22. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT INSIDE CAB OF THE MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300069
 

418-0292: THUMB GP

418-0292 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i05083047 SEBP6230
4180292 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 222-7101 [2] WASHER (71X130X3-MM THK)  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 299-6748 [1] LINK AS  
8. 384-3910 [2] PLATE AS-STOP  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 484-2149 [1] PIN  
13. 386-9500 [1] PIN AS  
14. 387-0277 [1] LINK AS-IDLER (RH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 387-0278 [1] LINK AS-IDLER (LH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 387-0279 [1] LINK AS (CENTER)  
16A. 7Y-5131 [2] BUSHING  
16B. 117-9432 [2] BUSHING  
17. 387-0280 [2] PIN AS  
18. 394-1764 [1] PIN  
19. 417-0223 Y [1] CYLINDER GP-THUMB  
20. 418-0293 [1] THUMB AS  
20A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
20B. 240-2912 [2] BUSHING  
20C. 384-3956 [2] CAP-RETAINER  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT INSIDE CAB OF THE MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Thumb - Lubricate
Hydraulic Thumbs
Stop - Inspect/Replace
Hydraulic Thumbs
Special Instruction
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the <NOBR>418-0310</NOBR> Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0310 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}

Caterpillar Parts SIS Catalog HYDRAULIC :

THUMB GP
387-9768 THUMB GP
THUMB GP
387-9766 THUMB GP
THUMB GP
387-9764 THUMB GP
THUMB GP
387-9762 THUMB GP
THUMB GP
387-9760 THUMB GP
THUMB GP
387-9756 THUMB GP
THUMB GP
387-9754 THUMB GP
THUMB GP
387-9752 THUMB GP
THUMB GP
387-9772 THUMB GP
THUMB GP
418-0278 THUMB GP
THUMB GP
418-0280 THUMB GP
THUMB GP
418-0282 THUMB GP
THUMB GP
418-0284 THUMB GP
THUMB GP
418-0286 THUMB GP
THUMB GP
418-0288 THUMB GP
THUMB GP
418-0290 THUMB GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.