AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

418-0372 THUMB GP -PIN ON, 5-TOOTH S/N THC1-UP FULL ROTATION FOR USE WITH 1219-MM (48-IN) BUCKET HYDRAULIC


WORK TOOLS
THUMB GP

THUMB HYDRAULIC THUMB THC
 Hydraulic Thumbs THC00001-UP (MACHINE) SEBP6230 HYDRAULIC THC   (2012)

WORK TOOLS

THUMB GP
THUMB GP
418-0368 THUMB GP
THUMB GP
418-0370 THUMB GP
THUMB GP
418-0372 THUMB GP
THUMB GP
418-0374 THUMB GP
THUMB GP
418-0376 THUMB GP
THUMB GP
418-0378 THUMB GP
 

#SEBP62300080
 

418-0372: THUMB GP

418-0372 THUMB GP -PIN ON, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i05107471 SEBP6230
4180372 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 418-0373 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 384-3956 [2] CAP-RETAINER  
15. 420-0497 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0498 [1] LINK AS-IDLER (LH)  
16A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
16B. 157-4552 [1] BEARING  
17. 420-0499 [1] LINK AS (CENTER)  
17A. 7Y-5131 [2] BUSHING  
17B. 117-9432 [2] BUSHING  
18. 420-0500 [1] PIN AS  
19. 420-0501 [2] PIN AS  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300081
 

418-0374: THUMB GP

418-0374 THUMB GP -PIN ON, 6-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i05107472 SEBP6230
4180374 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 418-0375 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 384-3956 [2] CAP-RETAINER  
15. 420-0497 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0498 [1] LINK AS-IDLER (LH)  
16A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
16B. 157-4552 [1] BEARING  
17. 420-0499 [1] LINK AS (CENTER)  
17A. 7Y-5131 [2] BUSHING  
17B. 117-9432 [2] BUSHING  
18. 420-0500 [1] PIN AS  
19. 420-0501 [2] PIN AS  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300082
 

418-0376: THUMB GP

418-0376 THUMB GP -PIN ON, 3-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i05107473 SEBP6230
4180376 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 418-0377 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 384-3956 [2] CAP-RETAINER  
15. 420-0497 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0498 [1] LINK AS-IDLER (LH)  
16A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
16B. 157-4552 [1] BEARING  
17. 420-0499 [1] LINK AS (CENTER)  
17A. 7Y-5131 [2] BUSHING  
17B. 117-9432 [2] BUSHING  
18. 420-0500 [1] PIN AS  
19. 420-0501 [2] PIN AS  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300083
 

418-0378: THUMB GP

418-0378 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i05125269 SEBP6230
4180378 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 418-0379 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 384-3956 [2] CAP-RETAINER  
15. 420-0497 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0498 [1] LINK AS-IDLER (LH)  
16A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
16B. 157-4552 [1] BEARING  
17. 420-0499 [1] LINK AS (CENTER)  
17A. 7Y-5131 [2] BUSHING  
17B. 117-9432 [2] BUSHING  
18. 420-0500 [1] PIN AS  
19. 420-0501 [2] PIN AS  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300084
 

418-0380: THUMB GP

418-0380 THUMB GP -PIN ON, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i05125332 SEBP6230
4180380 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 418-0381 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 384-3956 [2] CAP-RETAINER  
15. 420-0497 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0498 [1] LINK AS-IDLER (LH)  
16A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
16B. 157-4552 [1] BEARING  
17. 420-0499 [1] LINK AS (CENTER)  
17A. 7Y-5131 [2] BUSHING  
17B. 117-9432 [2] BUSHING  
18. 420-0500 [1] PIN AS  
19. 420-0501 [2] PIN AS  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300085
 

418-0382: THUMB GP

418-0382 THUMB GP -PIN ON, 6-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1524-MM (60-IN) BUCKET
i05125450 SEBP6230
4180382 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 418-0383 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 384-3956 [2] CAP-RETAINER  
15. 420-0497 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0498 [1] LINK AS-IDLER (LH)  
16A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
16B. 157-4552 [1] BEARING  
17. 420-0499 [1] LINK AS (CENTER)  
17A. 7Y-5131 [2] BUSHING  
17B. 117-9432 [2] BUSHING  
18. 420-0500 [1] PIN AS  
19. 420-0501 [2] PIN AS  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300086
 

418-0384: THUMB GP

418-0384 THUMB GP -PIN ON, 6-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1676-MM (66-IN) BUCKET
i05125451 SEBP6230
4180384 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 418-0385 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 384-3956 [2] CAP-RETAINER  
15. 420-0497 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0498 [1] LINK AS-IDLER (LH)  
16A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
16B. 157-4552 [1] BEARING  
17. 420-0499 [1] LINK AS (CENTER)  
17A. 7Y-5131 [2] BUSHING  
17B. 117-9432 [2] BUSHING  
18. 420-0500 [1] PIN AS  
19. 420-0501 [2] PIN AS  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300087
 

418-0386: THUMB GP

418-0386 THUMB GP -PIN GRABBER, 2-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i05125453 SEBP6230
4180386 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 418-0387 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 384-3956 [2] CAP-RETAINER  
15. 420-0497 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0498 [1] LINK AS-IDLER (LH)  
16A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
16B. 157-4552 [1] BEARING  
17. 420-0499 [1] LINK AS (CENTER)  
17A. 7Y-5131 [2] BUSHING  
17B. 117-9432 [2] BUSHING  
18. 420-0500 [1] PIN AS  
19. 420-0501 [2] PIN AS  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300088
 

418-0388: THUMB GP

418-0388 THUMB GP -PIN GRABBER, 2-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i05125509 SEBP6230
4180388 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 418-0389 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 384-3956 [2] CAP-RETAINER  
15. 420-0497 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0498 [1] LINK AS-IDLER (LH)  
16A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
16B. 157-4552 [1] BEARING  
17. 420-0499 [1] LINK AS (CENTER)  
17A. 7Y-5131 [2] BUSHING  
17B. 117-9432 [2] BUSHING  
18. 420-0500 [1] PIN AS  
19. 420-0501 [2] PIN AS  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300089
 

418-0390: THUMB GP

418-0390 THUMB GP -PIN GRABBER, 2-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i05125514 SEBP6230
4180390 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 418-0391 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 384-3956 [2] CAP-RETAINER  
15. 420-0497 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0498 [1] LINK AS-IDLER (LH)  
16A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
16B. 157-4552 [1] BEARING  
17. 420-0499 [1] LINK AS (CENTER)  
17A. 7Y-5131 [2] BUSHING  
17B. 117-9432 [2] BUSHING  
18. 420-0500 [1] PIN AS  
19. 420-0501 [2] PIN AS  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Thumb - Lubricate
Hydraulic Thumbs
Stop - Inspect/Replace
Hydraulic Thumbs
Special Instruction
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the <NOBR>418-0310</NOBR> Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0310 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}

Caterpillar Parts SIS Catalog HYDRAULIC :

THUMB GP
418-0370 THUMB GP
THUMB GP
418-0368 THUMB GP
THUMB GP
418-0308 THUMB GP
THUMB GP
418-0306 THUMB GP
THUMB GP
418-0304 THUMB GP
THUMB GP
418-0302 THUMB GP
THUMB GP
418-0300 THUMB GP
THUMB GP
418-0298 THUMB GP
THUMB GP
418-0374 THUMB GP
THUMB GP
418-0376 THUMB GP
THUMB GP
418-0378 THUMB GP
THUMB GP
418-0380 THUMB GP
THUMB GP
418-0382 THUMB GP
THUMB GP
418-0384 THUMB GP
THUMB GP
418-0386 THUMB GP
THUMB GP
418-0388 THUMB GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.