AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

421-7348 THUMB GP -PIN ON, 4-TOOTH S/N THD1-UP PARTILA ROTATION FOR USE WITH 1219-MM (48-IN) BUCKET HYDRAULIC


WORK TOOLS
THUMB GP

THUMB HYDRAULIC THUMB THC
 Hydraulic Thumbs THC00001-UP (MACHINE) SEBP6230 HYDRAULIC THC   (2012)

WORK TOOLS

THUMB GP
THUMB GP
421-7344 THUMB GP
THUMB GP
421-7346 THUMB GP
THUMB GP
421-7348 THUMB GP
THUMB GP
421-7350 THUMB GP
THUMB GP
422-2638 THUMB GP
THUMB GP
422-2640 THUMB GP
 

#SEBP62300160
 

421-7348: THUMB GP

421-7348 THUMB GP -PIN ON, 4-TOOTH
S/N THD1-UP
PARTILA ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i05115791 SEBP6230
4217348 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 263-9600 [6] SPACER  
4. 384-3910 [2] PLATE AS-STOP  
5. 384-3913 [2] PLATE-CAP  
6. 384-3914 [1] PIN  
7. 394-1764 [1] PIN  
8. 394-1765 [1] PIN AS  
9. 417-0225 Y [1] CYLINDER GP-THUMB  
10. 421-7345 [1] THUMB AS  
10A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
10B. 147-5838 [2] BUSHING  
10C. 384-3956 [2] CAP-RETAINER  
11. 093-0349 [1] WASHER (22X60X6-MM THK)  
12. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
13. 332-4695 M [4] NUT (M8X1.25-THD)  
14. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
15. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
16. 6V-7676 M [2] NUT (M24X3-THD)  
17. 8T-4173 M [1] BOLT (M16X2X110-MM)  
18. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
19. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
20. 8T-5878 M [2] BOLT (M24X3X80-MM)  
21. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300161
 

421-7350: THUMB GP

421-7350 THUMB GP -PIN GRABBER, 2-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i05115795 SEBP6230
4217350 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 263-9600 [6] SPACER  
4. 384-3910 [2] PLATE AS-STOP  
5. 384-3913 [2] PLATE-CAP  
6. 384-3914 [1] PIN  
7. 394-1764 [1] PIN  
8. 394-1765 [1] PIN AS  
9. 417-0225 Y [1] CYLINDER GP-THUMB  
10. 421-7347 [1] THUMB AS  
10A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
10B. 147-5838 [2] BUSHING  
10C. 384-3956 [2] CAP-RETAINER  
11. 093-0349 [1] WASHER (22X60X6-MM THK)  
12. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
13. 332-4695 M [4] NUT (M8X1.25-THD)  
14. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
15. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
16. 6V-7676 M [2] NUT (M24X3-THD)  
17. 8T-4173 M [1] BOLT (M16X2X110-MM)  
18. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
19. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
20. 8T-5878 M [2] BOLT (M24X3X80-MM)  
21. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300162
 

422-2638: THUMB GP

422-2638 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i05131233 SEBP6230
4222638 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 137-8479 [4] SHIM (2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 299-6748 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 484-2149 [1] PIN  
12. 386-9500 [1] PIN AS  
13. 387-0277 [1] LINK AS-IDLER (RH)  
13A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
13B. 157-4552 [1] BEARING  
14. 387-0278 [1] LINK AS-IDLER (LH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 387-0279 [1] LINK AS (CENTER)  
15A. 7Y-5131 [2] BUSHING  
15B. 117-9432 [2] BUSHING  
16. 387-0280 [2] PIN AS  
17. 394-1764 [1] PIN  
18. 417-0223 Y [1] CYLINDER GP-THUMB  
19. 422-2639 [1] THUMB AS  
19A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
19B. 240-2912 [2] BUSHING  
19C. 384-3956 [2] CAP-RETAINER  
20. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
21. 332-4695 M [4] NUT (M8X1.25-THD)  
22. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF THE MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300163
 

422-2640: THUMB GP

422-2640 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i05088572 SEBP6230
4222640 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
2. 137-8479 [4] SHIM (2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
5. 384-3910 [2] PLATE AS-STOP  
6. 384-3913 [2] PLATE-CAP  
7. 384-3914 [1] PIN  
8. 484-2149 [1] PIN  
9. 394-1764 [1] PIN  
10. 417-0224 Y [1] CYLINDER GP-THUMB  
11. 422-2639 [1] THUMB AS  
11A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
11B. 240-2912 [2] BUSHING  
11C. 384-3956 [2] CAP-RETAINER  
12. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
13. 332-4695 M [4] NUT (M8X1.25-THD)  
14. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
15. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
16. 6V-7676 M [2] NUT (M24X3-THD)  
17. 8T-4173 M [1] BOLT (M16X2X110-MM)  
18. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
19. 8T-5878 M [2] BOLT (M24X3X80-MM)  
20. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PROPER PLACEMENT OF FILM INSIDE CAB OF MACHINE)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300164
 

430-5834: THUMB GP

430-5834 THUMB GP
S/N THC1-UP
i05429342 SEBP6230
4305834 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 387-9685 [1] THUMB AS  
1A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
1B. 117-9432 [2] BUSHING  
1C. 391-3847 [2] CAP-RETAINER  
2. 391-3823 [1] LINK AS  
2A. 4V-4445 [4] BUSHING  
 

#SEBP62300165
 

430-5835: THUMB GP

430-5835 THUMB GP
S/N THC1-UP
i05429343 SEBP6230
4305835 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 387-9675 [1] THUMB AS  
1A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
1B. 117-9432 [2] BUSHING  
1C. 391-3847 [2] CAP-RETAINER  
2. 391-3823 [1] LINK AS  
2A. 4V-4445 [4] BUSHING  
 

#SEBP62300166
 

433-2090: THUMB GP

433-2090 THUMB GP -PIN ON, 5-TOOTH
S/N THC1-UP
FULL ROTATION
Type 1
FOR USE WITH 1524-MM (60-IN) BUCKET
i05486815 SEBP6230
4332090 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
4. 157-7257 [1] RETAINER  
5. 159-8036 [1] FILM-WARNING (READ OMM)  
6. 264-6924 [1] PIN AS  
8. 285-2043 [5] SHIM (1.6-MM THK)  
9. 287-7583 [1] LINK AS  
10. 318-1139 [1] WASHER (26X80X3-MM THK)  
11. 433-2091 [1] THUMB AS  
11A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
11B. 7Y-2397 [2] BUSHING  
12. 433-2092 [2] PLATE AS-STOP  
13. 433-2093 [1] PLATE-SPACER  
14. 433-2094 [1] LINK AS-IDLER  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 160-7864 [1] BEARING  
15. 433-2095 [1] LINK AS-IDLER  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 160-7864 [1] BEARING  
16. 433-2096 [1] LINK AS (POWER)  
16A. 3G-8779 [4] BUSHING  
17. 433-2097 [2] PIN AS  
18. 433-2098 [1] PIN  
19. 433-2099 [2] PLATE-CAP  
20. 433-2100 [1] PIN  
21. 434-6255 [1] PIN AS  
22. 438-9382 Y [1] CYLINDER GP-THUMB  
23. 094-3709 [2] PIN  
24. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
25. 332-4695 M [4] NUT (M8X1.25-THD)  
26. 6V-9199 M [1] BOLT (M24X3X50-MM)  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8C-3411 M [2] BOLT (M30X3.5X90-MM)  
29. 8T-0359 M [1] BOLT (M16X2X130-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
34. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
35. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
36. 9X-8399 [2] WASHER (33X56X6-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PLACEMENT INSIDE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300167
 

433-2090: THUMB GP

433-2090 THUMB GP -PIN ON, 5-TOOTH
S/N THC1-UP
FULL ROTATION
Type 2
FOR USE WITH 1524-MM (60-IN) BUCKET
i05575509 SEBP6230
4332090 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
4. 157-7257 [1] RETAINER  
5. 159-8036 [1] FILM-WARNING (READ OMM)  
6. 264-6924 [1] PIN AS  
8. 285-2043 [5] SHIM (1.6-MM THK)  
9. 287-7583 [1] LINK AS  
10. 318-1139 [1] WASHER (26X80X3-MM THK)  
11. 433-2091 [1] THUMB AS  
11A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
11B. 7Y-2397 [2] BUSHING  
12. 433-2092 [2] PLATE AS-STOP  
13. 433-2093 [1] PLATE-SPACER  
14. 442-2399 C [1] LINK AS-IDLER (RH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 442-2400 C [1] LINK AS-IDLER (LH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 433-2096 [1] LINK AS (POWER)  
16A. 3G-8779 [4] BUSHING  
17. 433-2097 [2] PIN AS  
18. 433-2098 [1] PIN  
19. 433-2099 [2] PLATE-CAP  
20. 433-2100 [1] PIN  
21. 434-6255 [1] PIN AS  
22. 438-9382 Y [1] CYLINDER GP-THUMB  
23. 094-3709 [2] PIN  
24. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
25. 332-4695 M [4] NUT (M8X1.25-THD)  
26. 6V-9199 M [1] BOLT (M24X3X50-MM)  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8C-3411 M [2] BOLT (M30X3.5X90-MM)  
29. 8T-0359 M [1] BOLT (M16X2X130-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
34. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
35. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
36. 9X-8399 [2] WASHER (33X56X6-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PLACEMENT INSIDE CAB)
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300168
 

438-9388: THUMB GP

438-9388 THUMB GP -PIN GRABBER, 5-TOOTH
S/N THC1-UP
FULL ROTATION
Type 1
FOR USE WITH 1524-MM (60-IN) BUCKET
i05487733 SEBP6230
4389388 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
4. 157-7257 [1] RETAINER  
5. 159-8036 [1] FILM-WARNING (READ OMM)  
6. 264-6924 [1] PIN AS  
7. 285-2043 [6] SHIM (1.6-MM THK)  
8. 287-7583 [1] LINK AS  
9. 318-1139 [1] WASHER (26X80X3-MM THK)  
10. 433-2092 [2] PLATE AS-STOP  
11. 433-2097 [2] PIN AS  
12. 433-2098 [1] PIN  
13. 433-2099 [2] PLATE-CAP  
14. 433-2100 [1] PIN  
15. 434-6255 [1] PIN AS  
16. 438-9382 Y [1] CYLINDER GP-THUMB  
17. 438-9389 [1] THUMB AS  
17A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
17B. 7Y-2397 [2] BUSHING  
17C. 438-9399 [2] PLATE  
18. 438-9390 [1] LINK AS-IDLER  
18A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
18B. 160-7864 [1] BEARING  
19. 438-9391 [1] LINK AS-IDLER  
19A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
19B. 160-7864 [1] BEARING  
20. 438-9392 [1] LINK AS (POWER)  
20A. 3G-8779 [4] BUSHING  
21. 094-3709 [2] PIN  
22. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
23. 332-4695 M [4] NUT (M8X1.25-THD)  
24. 6V-9199 M [1] BOLT (M24X3X50-MM)  
25. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
26. 8C-3411 M [2] BOLT (M30X3.5X90-MM)  
27. 8T-0359 M [1] BOLT (M16X2X130-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
31. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
32. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
33. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
34. 9X-8399 [2] WASHER (33X56X6-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300169
 

438-9388: THUMB GP

438-9388 THUMB GP -PIN GRABBER, 5-TOOTH
S/N THC1-UP
FULL ROTATION
Type 2
FOR USE WITH 1524-MM (60-IN) BUCKET
i05575529 SEBP6230
4389388 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
4. 157-7257 [1] RETAINER  
5. 159-8036 [1] FILM-WARNING (READ OMM)  
6. 264-6924 [1] PIN AS  
7. 285-2043 [6] SHIM (1.6-MM THK)  
8. 287-7583 [1] LINK AS  
9. 318-1139 [1] WASHER (26X80X3-MM THK)  
10. 433-2092 [2] PLATE AS-STOP  
11. 433-2097 [2] PIN AS  
12. 433-2098 [1] PIN  
13. 433-2099 [2] PLATE-CAP  
14. 433-2100 [1] PIN  
15. 484-2719 [1] PIN AS  
16. 438-9382 Y [1] CYLINDER GP-THUMB  
17. 438-9389 [1] THUMB AS  
17A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
17B. 7Y-2397 [2] BUSHING  
17C. 438-9399 [2] PLATE  
18. 442-2402 C [1] LINK AS-IDLER (RH)  
18A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
18B. 157-4552 [1] BEARING  
19. 442-2403 C [1] LINK AS-IDLER (LH)  
19A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
19B. 157-4552 [1] BEARING  
20. 438-9392 [1] LINK AS (POWER)  
20A. 3G-8779 [4] BUSHING  
21. 094-3709 [2] PIN  
22. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
23. 332-4695 M [4] NUT (M8X1.25-THD)  
24. 6V-9199 M [1] BOLT (M24X3X50-MM)  
25. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
26. 8C-3411 M [2] BOLT (M30X3.5X90-MM)  
27. 8T-0359 M [1] BOLT (M16X2X130-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
31. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
32. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
33. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
34. 9X-8399 [2] WASHER (33X56X6-MM THK)  
   
  268-4530 CF [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Thumb - Lubricate
Hydraulic Thumbs
Stop - Inspect/Replace
Hydraulic Thumbs
Special Instruction
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the <NOBR>418-0310</NOBR> Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0310 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}

Caterpillar Parts SIS Catalog HYDRAULIC :

THUMB GP
421-7346 THUMB GP
THUMB GP
421-7344 THUMB GP
THUMB GP
421-7326 THUMB GP
THUMB GP
421-7324 THUMB GP
THUMB GP
421-7322 THUMB GP
THUMB GP
421-7320 THUMB GP
THUMB GP
421-7318 THUMB GP
THUMB GP
421-7316 THUMB GP
THUMB GP
421-7350 THUMB GP
THUMB GP
422-2638 THUMB GP
THUMB GP
422-2640 THUMB GP
THUMB GP
430-5834 THUMB GP
THUMB GP
430-5835 THUMB GP
THUMB GP
433-2090 THUMB GP
THUMB GP
433-2090 THUMB GP
THUMB GP
438-9388 THUMB GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.