AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

470-1028 THUMB GP -PIN GRABBER, 4-TOOTH S/N THC1-UP FULL ROTATION FOR USE WITH 1067-MM (42-IN) BUCKET HYDRAULIC


WORK TOOLS
THUMB GP

THUMB HYDRAULIC THUMB THC
 Hydraulic Thumbs THC00001-UP (MACHINE) SEBP6230 HYDRAULIC THC   (2012)

WORK TOOLS

THUMB GP
THUMB GP
468-0096 THUMB GP
THUMB GP
468-5188 THUMB GP
THUMB GP
470-1028 THUMB GP
THUMB GP
470-6800 THUMB GP
THUMB GP
472-4706 THUMB GP
THUMB GP
473-3845 THUMB GP
 

#SEBP62300250
 

470-1028: THUMB GP

470-1028 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i06064477 SEBP6230
4701028 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 263-9600 [8] SPACER  
5. 8T-7929 M [2] BOLT (M12X1.75X180-MM)  
6. 313-4425 [1] LINK AS  
7. 313-4426 [1] PIN AS  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3910 [2] PLATE AS-STOP  
10. 384-3913 [2] PLATE-CAP  
11. 384-3914 [1] PIN  
12. 384-4034 [1] TUBE-RETAINER  
13. 394-1764 [1] PIN  
14. 417-0226 Y [1] CYLINDER GP-THUMB  
15. 462-2993 [1] THUMB AS  
15A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
15B. 147-5838 [2] BUSHING  
15C. 384-3956 [2] CAP-RETAINER  
16. 462-2995 [1] PIN  
17. 470-1029 [1] LINK AS-IDLER (RH)  
17A. 157-4552 [1] BEARING  
18. 470-1030 [1] LINK AS-IDLER (LH)  
18A. 157-4552 [1] BEARING  
19. 470-1033 [2] PIN-CYLINDER  
20. 125-7877 [1] PIN  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6V-7687 M [4] LOCKNUT (M12X1.75-THD)  
26. 7X-2551 M [2] BOLT (M12X1.75X200-MM)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
30. 8T-5878 M [2] BOLT (M24X3X80-MM)  
31. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PLACEMENT INSIDE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300251
 

470-6800: THUMB GP

470-6800 THUMB GP -4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i06063979 SEBP6230
4706800 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 8T-7929 M [2] BOLT (M12X1.75X180-MM)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 263-9600 [6] SPACER  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 417-0223 Y [1] CYLINDER GP-THUMB  
13. 420-0499 [1] LINK AS (CENTER)  
13A. 7Y-5131 [2] BUSHING  
13B. 117-9432 [2] BUSHING  
14. 420-0500 [1] PIN AS  
15. 462-2995 [1] PIN  
16. 470-6793 [1] THUMB AS  
16A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
16B. 147-5838 [2] BUSHING  
16C. 384-3956 [2] CAP-RETAINER  
17. 470-6794 [1] LINK AS-IDLER (RH)  
17A. 157-4552 [1] BEARING  
18. 470-6795 [1] LINK AS-IDLER (LH)  
18A. 157-4552 [1] BEARING  
19. 470-6796 [2] PIN-CYLINDER  
20. 125-7877 [1] PIN  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6V-7687 M [4] LOCKNUT (M12X1.75-THD)  
26. 7X-7960 M [2] BOLT (M12X1.75X220-MM)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
30. 8T-5878 M [2] BOLT (M24X3X80-MM)  
31. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PLACEMENT INSIDE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300252
 

472-4706: THUMB GP

472-4706 THUMB GP -PIN ON, 5-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i06063915 SEBP6230
4724706 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
6. 384-3910 [2] PLATE AS-STOP  
7. 384-3913 [2] PLATE-CAP  
8. 384-3914 [1] PIN  
9. 394-1764 [1] PIN  
10. 417-0224 Y [1] CYLINDER GP-THUMB  
11. 468-0099 [1] PIN  
12. 472-4710 [1] THUMB AS  
12A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
12B. 240-2912 [2] BUSHING  
12C. 384-3956 [2] CAP-RETAINER  
13. 125-7877 [1] PIN  
14. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
15. 332-4695 M [4] NUT (M8X1.25-THD)  
16. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
17. 6V-7676 M [2] NUT (M24X3-THD)  
18. 8T-4173 M [1] BOLT (M16X2X110-MM)  
19. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
20. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PACEMENT INSIDE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300253
 

473-3845: THUMB GP

473-3845 THUMB GP -PIN GRABBER, 2-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 610-MM (24-IN) BUCKET
i06064405 SEBP6230
4733845 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 185-8079 [1] PIN  
5. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
6. 378-5575 Y [1] CYLINDER GP-THUMB  
7. 379-7002 [1] PIN  
8. 391-3834 [2] PLATE-CAP  
9. 392-3640 [4] PLATE-SHIM  
10. 392-3641 [1] PIN (STICK)  
11. 468-5189 [1] THUMB AS  
11A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
11B. 099-0721 [2] BUSHING  
11C. 391-3847 [2] CAP-RETAINER  
12. 096-4876 M [2] NUT (M14X2-THD)  
13. 248-5474 M [1] BOLT (M14X2X160-MM)  
14. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
15. 332-4695 M [4] NUT (M8X1.25-THD)  
16. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
17. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PLACEMENT INSIDE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300254
 

473-9846: THUMB GP

473-9846 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i06064243 SEBP6230
4739846 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 222-7101 [2] WASHER (71X130X3-MM THK)  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 299-6748 [1] LINK AS  
7A. 7Y-3529 [1] TUBE  
8. 384-3910 [2] PLATE AS-STOP  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 484-2149 [1] PIN  
13. 386-9500 [1] PIN AS  
14. 387-0277 [1] LINK AS-IDLER (RH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 387-0278 [1] LINK AS-IDLER (LH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 387-0279 [1] LINK AS (CENTER)  
16A. 7Y-5131 [2] BUSHING  
16B. 117-9432 [2] BUSHING  
17. 387-0280 [2] PIN AS  
18. 394-1764 [1] PIN  
19. 417-0223 Y [1] CYLINDER GP-THUMB  
20. 473-9847 [1] THUMB AS  
20A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
20B. 240-2912 [2] BUSHING  
20C. 384-3956 [2] CAP-RETAINER  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PLACEMENT INSIDE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300255
 

473-9848: THUMB GP

473-9848 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i06064247 SEBP6230
4739848 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 320-5201 [1] LINK AS  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 417-0223 Y [1] CYLINDER GP-THUMB  
14. 420-0497 [1] LINK AS-IDLER (RH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 157-4552 [1] BEARING  
15. 420-0498 [1] LINK AS-IDLER (LH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 157-4552 [1] BEARING  
16. 420-0499 [1] LINK AS (CENTER)  
16A. 7Y-5131 [2] BUSHING  
16B. 117-9432 [2] BUSHING  
17. 420-0500 [1] PIN AS  
18. 420-0501 [2] PIN AS  
19. 473-9849 [1] THUMB AS  
19A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
19B. 147-5838 [2] BUSHING  
19C. 384-3956 [2] CAP-RETAINER  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
31. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
32. 8T-5878 M [2] BOLT (M24X3X80-MM)  
33. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PLACEMENT INSIDE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300256
 

473-9850: THUMB GP

473-9850 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i06064377 SEBP6230
4739850 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 159-8036 [1] FILM-WARNING (READ OMM)  
3. 222-7101 [2] WASHER (71X130X3-MM THK)  
4. 263-9600 [6] SPACER  
5. 313-4425 [1] LINK AS  
6. 313-4426 [1] PIN AS  
7. 384-3906 [1] LINK AS-IDLER (RH)  
7A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
7B. 157-4552 [1] BEARING  
8. 384-3907 [1] LINK AS-IDLER (LH)  
8A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
8B. 157-4552 [1] BEARING  
9. 384-3908 [1] LINK AS (CENTER)  
9A. 7Y-5131 [4] BUSHING  
10. 384-3910 [2] PLATE AS-STOP  
11. 384-3911 [2] PIN AS  
12. 384-3913 [2] PLATE-CAP  
13. 384-3914 [1] PIN  
14. 384-4034 [1] TUBE-RETAINER  
15. 394-1764 [1] PIN  
16. 394-1765 [1] PIN AS  
17. 417-0226 Y [1] CYLINDER GP-THUMB  
18. 473-9851 [1] THUMB AS  
18A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
18B. 147-5838 [2] BUSHING  
18C. 384-3956 [2] CAP-RETAINER  
19. 093-0349 [1] WASHER (22X60X6-MM THK)  
20. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
21. 332-4695 M [4] NUT (M8X1.25-THD)  
22. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
31. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
32. 8T-5878 M [2] BOLT (M24X3X80-MM)  
33. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PLACEMENT INSIDE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300257
 

473-9852: THUMB GP

473-9852 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i06188509 SEBP6230
4739852 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
3. 9X-8399 [2] WASHER (33X56X6-MM THK)  
4. 157-7257 [1] RETAINER  
5. 159-8036 [1] FILM-WARNING (READ OMM)  
6. 264-6924 [1] PIN AS  
7. 285-2043 B [6] SHIM (1.6-MM THK)  
8. 287-7583 [1] LINK AS  
9. 318-1139 [1] WASHER (26X80X3-MM THK)  
10. 433-2092 [2] PLATE AS-STOP  
11. 433-2097 [2] PIN AS  
12. 433-2098 [1] PIN  
13. 433-2099 [2] PLATE-CAP  
14. 433-2100 [1] PIN  
15. 484-2719 [1] PIN AS  
16. 438-9382 Y [1] CYLINDER GP-THUMB  
17. 438-9392 [1] LINK AS (POWER)  
17A. 3G-8779 [4] BUSHING  
18. 442-2402 [1] LINK AS-IDLER (RH)  
18A. 157-4552 [2] BEARING  
19. 442-2403 [1] LINK AS-IDLER (LH)  
20. 473-9853 [1] THUMB AS  
20A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
20B. 7Y-2397 [2] BUSHING  
20C. 438-9399 [2] PLATE  
21. 094-3709 [2] PIN  
22. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
23. 332-4695 M [4] NUT (M8X1.25-THD)  
24. 6V-9199 M [1] BOLT (M24X3X50-MM)  
25. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
26. 173-9683 M [2] BOLT (M30X3.5X90-MM)  
27. 8T-0359 M [1] BOLT (M16X2X130-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
31. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
32. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
33. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300258
 

473-9854: THUMB GP

473-9854 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i06188511 SEBP6230
4739854 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
3. 9X-8399 [2] WASHER (33X56X6-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 212-3095 [1] PLATE  
6. 256-1160 B [8] SHIM (3-MM THK)(105.1X215.9X3-MM THK)  
7. 257-8325 [1] PIN AS  
8. 9X-8257 [3] WASHER (17.5X30X3.5-MM THK)  
9. 484-2722 [1] PIN AS  
10. 433-2092 [2] PLATE AS-STOP  
11. 433-2098 [1] PIN  
12. 433-2099 [2] PLATE-CAP  
13. 433-2100 [1] PIN  
14. 442-7956 Y [1] CYLINDER GP-THUMB  
15. 443-0161 [2] PIN AS  
16. 443-0177 [1] LINK AS-IDLER (RH)  
16A. 187-9587 [2] BUSHING  
17. 443-0178 [1] LINK AS-IDLER (LH)  
18. 443-0179 [1] LINK AS (POWER)  
18A. 3G-8779 [4] BUSHING  
19. 473-9855 [1] THUMB AS  
19A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
19B. 4I-4542 [2] BUSHING  
20. 094-3709 [2] PIN  
21. 201-2771 [1] WASHER (26X90X8-MM THK)  
22. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
23. 332-4695 M [4] NUT (M8X1.25-THD)  
24. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
25. 7X-2553 M [3] BOLT (M16X2X40-MM)  
26. 173-9683 M [2] BOLT (M30X3.5X90-MM)  
27. 8T-0359 M [1] BOLT (M16X2X130-MM)  
28. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
31. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
32. 8T-5379 M [1] BOLT (M24X3X50-MM)  
33. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
34. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300259
 

474-5731: THUMB GP

474-5731 THUMB GP -PIN GRABBER, 5-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i06063939 SEBP6230
4745731 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
3. 137-8479 [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 384-3910 [2] PLATE AS-STOP  
7. 384-3913 [2] PLATE-CAP  
8. 384-3914 [1] PIN  
9. 484-2149 [1] PIN  
10. 394-1764 [1] PIN  
11. 417-0224 Y [1] CYLINDER GP-THUMB  
12. 474-5732 [1] THUMB AS  
12A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
12B. 240-2912 [2] BUSHING  
12C. 384-3956 [2] CAP-RETAINER  
13. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
14. 332-4695 M [4] NUT (M8X1.25-THD)  
15. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
16. 6V-7676 M [2] NUT (M24X3-THD)  
17. 8T-4173 M [1] BOLT (M16X2X110-MM)  
18. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
19. 8T-5878 M [2] BOLT (M24X3X80-MM)  
20. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (REFER TO OMM FOR PLACEMENT IN CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Thumb - Lubricate
Hydraulic Thumbs
Stop - Inspect/Replace
Hydraulic Thumbs
Special Instruction
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the <NOBR>418-0310</NOBR> Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0310 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}

Caterpillar Parts SIS Catalog HYDRAULIC :

THUMB GP
468-5188 THUMB GP
THUMB GP
468-0096 THUMB GP
THUMB GP
467-9068 THUMB GP
THUMB GP
465-4062 THUMB GP
THUMB GP
463-9218 THUMB GP
THUMB GP
461-1333 THUMB GP
THUMB GP
460-5990 THUMB GP
THUMB GP
459-3121 THUMB GP
THUMB GP
470-6800 THUMB GP
THUMB GP
472-4706 THUMB GP
THUMB GP
473-3845 THUMB GP
THUMB GP
473-9846 THUMB GP
THUMB GP
473-9848 THUMB GP
THUMB GP
473-9850 THUMB GP
THUMB GP
473-9852 THUMB GP
THUMB GP
473-9854 THUMB GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.