AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

513-0805 THUMB GP -PIN GRABBER, 6-TOOTH S/N THD1-UP PARTIAL ROTATION FOR USE WITH 1067-MM (42-IN) BUCKET HYDRAULIC


WORK TOOLS
THUMB GP

THUMB HYDRAULIC THUMB THC
 Hydraulic Thumbs THC00001-UP (MACHINE) SEBP6230 HYDRAULIC THC   (2012)

WORK TOOLS

THUMB GP
THUMB GP
512-7793 THUMB GP
THUMB GP
512-7795 THUMB GP
THUMB GP
513-0805 THUMB GP
THUMB GP
516-8365 THUMB GP
THUMB GP
517-1282 THUMB GP
THUMB GP
524-9702 THUMB GP
 

#SEBP62300280
 

513-0805: THUMB GP

513-0805 THUMB GP -PIN GRABBER, 6-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i06823526 SEBP6230
5130805 THUMB GP Parts scheme 5130805 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 185-8079 [1] PIN  
5. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
6. 378-5575 Y [1] CYLINDER GP-THUMB  
7. 379-7002 [1] PIN  
8. 391-3834 [2] PLATE-CAP  
9. 392-3640 [4] PLATE-SHIM  
10. 392-3641 [1] PIN (STICK)  
11. 513-0806 [1] THUMB AS  
11A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
11B. 099-0721 [2] BUSHING  
11C. 285-3254 [1] PLATE (PROTECTOR)  
11D. 391-3847 [2] CAP-RETAINER  
12. 096-4876 M [2] NUT (M14X2-THD)  
13. 248-5474 M [1] BOLT (M14X2X160-MM)  
14. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
15. 332-4695 M [4] NUT (M8X1.25-THD)  
16. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
17. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300281
 

516-8365: THUMB GP

516-8365 THUMB GP -PIN GRABBER, 5-TOOTH
S/N THD1-UP
PARTIAL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i06824076 SEBP6230
5168365 THUMB GP Parts scheme 5168365 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 185-8079 [1] PIN  
6. 378-5575 Y [1] CYLINDER GP-THUMB  
7. 379-7002 [1] PIN  
8. 391-3834 [2] PLATE-CAP  
9. 392-3640 [4] PLATE-SHIM  
10. 392-3641 [1] PIN (STICK)  
11. 439-2169 [1] THUMB AS  
11A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
11B. 099-0721 [2] BUSHING  
11C. 285-3254 [1] PLATE (PROTECTOR)  
11D. 391-3847 [2] CAP-RETAINER  
12. 096-4876 M [2] NUT (M14X2-THD)  
13. 248-5474 M [1] BOLT (M14X2X160-MM)  
14. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
15. 332-4695 M [4] NUT (M8X1.25-THD)  
16. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
17. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
18. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
19. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300282
 

517-1282: THUMB GP

517-1282 THUMB GP -PIN GRABBER, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i06823319 SEBP6230
5171282 THUMB GP Parts scheme 5171282 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 313-4425 [1] LINK AS  
7. 313-4426 [1] PIN AS  
8. 384-3906 [1] LINK AS-IDLER (RH)  
8A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
8B. 157-4552 [1] BEARING  
9. 384-3907 [1] LINK AS-IDLER (LH)  
9A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
9B. 157-4552 [1] BEARING  
10. 384-3908 [1] LINK AS (CENTER)  
10A. 7Y-5131 [4] BUSHING  
11. 384-3910 [2] PLATE AS-STOP  
12. 384-3911 [2] PIN AS  
13. 384-3913 [2] PLATE-CAP  
14. 384-3914 [1] PIN  
15. 384-4034 [1] TUBE-RETAINER  
16. 394-1764 [1] PIN  
17. 394-1765 [1] PIN AS  
18. 417-0226 Y [1] CYLINDER GP-THUMB  
19. 517-1283 [1] THUMB AS  
19A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
19B. 147-5838 [2] BUSHING  
19C. 285-3254 [1] PLATE (PROTECTOR)  
19D. 384-3956 [2] CAP-RETAINER  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
31. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
32. 8T-5878 M [2] BOLT (M24X3X80-MM)  
33. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300283
 

524-9702: THUMB GP

524-9702 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STIC. FULL ROTATION
FIELD REPLACEMENT FOR 1372-MM (54-IN) BUCKET
i07092235 SEBP6230
5249702 THUMB GP Parts scheme 5249702 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 B [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 222-7101 [2] WASHER (71X130X3-MM THK)  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 387-0277 [1] LINK AS-IDLER (RH)  
11A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
11B. 157-4552 [1] BEARING  
12. 484-2149 [1] PIN  
13. 387-0279 [1] LINK AS (CENTER)  
13A. 7Y-5131 [2] BUSHING  
13B. 117-9432 [2] BUSHING  
14. 394-1764 [1] PIN  
15. 417-0223 Y [1] CYLINDER GP-THUMB  
16. 418-0293 [1] THUMB AS  
16A. 386-4113 [4] PLATE (TOOTH)  
16B. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
16C. 240-2912 [2] BUSHING  
16D. 285-3254 [1] PLATE (PROTECTOR)  
16E. 384-3956 [2] CAP-RETAINER  
17. 492-8535 [1] SPACER (72X118X16-MM THK)  
18. 524-9703 [1] LINK AS  
  7Y-3529 [1] TUBE  
19. 524-9704 [1] LINK AS-IDLER (LH)  
19A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
19B. 157-4552 [1] BEARING  
20. 524-9705 [2] PIN AS  
21. 524-9706 [1] PIN AS  
22. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
23. 332-4695 M [4] NUT (M8X1.25-THD)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
32. 8T-5878 M [2] BOLT (M24X3X80-MM)  
33. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON INSIDE OF THE CAB)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300284
 

528-7210: THUMB GP

528-7210 THUMB GP -PIN ON, 3-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE. FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i07092268 SEBP6230
5287210 THUMB GP Parts scheme 5287210 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 B [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 222-7101 [2] WASHER (71X130X3-MM THK)  
6. 249-0165 [1] TUBE-RETAINER  
7. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
8. 384-3910 [2] PLATE AS-STOP  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 386-4110 [1] PIN  
12. 387-0280 [2] PIN AS  
13. 394-1764 [1] PIN  
14. 417-0223 Y [1] CYLINDER GP-THUMB  
15. 455-6625 [1] LINK AS  
15A. 117-9432 [2] BUSHING  
15B. 7Y-5131 [2] BUSHING  
16. 528-7211 [1] THUMB AS  
16A. 240-2912 [2] BUSHING  
16B. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
16C. 285-3254 [1] PLATE (PROTECTOR)  
16D. 384-3956 [2] CAP-RETAINER  
17. 528-7212 [1] LINK AS-IDLER  
17A. 247-4142 [1] BUSHING  
17B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
18. 528-7213 [1] LINK AS-IDLER  
18A. 247-4142 [1] BUSHING  
18B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
19. 528-7214 [1] PIN AS  
20. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
21. 332-4695 M [4] NUT (M8X1.25-THD)  
22. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
23. 6V-7676 M [2] NUT (M24X3-THD)  
24. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 7X-2549 M [1] BOLT (M12X1.75X100-MM)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
31. 8T-5878 M [2] BOLT (M24X3X80-MM)  
32. 8T-6385 M [1] BOLT (M16X2X180-MM)  
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON INSIDE OF THE CAB)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300285
 

532-8815: THUMB GP

532-8815 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
REQUIRES BRACKET AND REINFORCEMENT PLATE OR THUMB READY STICK. FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i07091395 SEBP6230
5328815 THUMB GP Parts scheme 5328815 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
4. 157-7257 [1] RETAINER  
5. 159-8036 [1] FILM-WARNING (READ OMM)  
7. 285-2043 B [5] SHIM (1.6-MM THK)  
8. 318-1139 [1] WASHER (26X80X3-MM THK)  
9. 433-2092 [2] PLATE AS-STOP  
10. 433-2093 [1] PLATE-SPACER  
11. 433-2096 [1] LINK AS (POWER)  
11A. 3G-8779 [4] BUSHING  
12. 433-2098 [1] PIN  
13. 433-2099 [2] PLATE-CAP  
14. 433-2100 [1] PIN  
15. 434-6255 [1] PIN AS  
16. 438-9382 Y [1] CYLINDER GP-THUMB  
17. 442-2399 [1] LINK AS-IDLER (RH)  
17A. 157-4552 [1] BEARING  
17B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
18. 443-0091 [1] THUMB AS  
18A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
18B. 7Y-2397 [2] BUSHING  
18C. 285-3254 [1] PLATE (PROTECTOR)  
19. 504-2111 [1] SPACER (72X135X22-MM THK)  
20. 532-8816 [1] LINK AS  
21. 532-8817 [1] LINK AS-IDLER  
21A. 157-4552 [1] BEARING  
21B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
22. 532-8818 [2] PIN AS  
    (EACH INCLUDES)
  433-2124 [1] PLATE-RETAINER  
23. 532-8847 [1] PIN AS  
24. 094-3709 [2] PIN  
25. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
26. 332-4695 M [4] NUT (M8X1.25-THD)  
27. 6V-9199 M [1] BOLT (M24X3X50-MM)  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 173-9683 M [2] BOLT (M30X3.5X90-MM)  
30. 8T-0359 M [1] BOLT (M16X2X130-MM)  
31. 8T-4174 M [1] BOLT (M16X2X120-MM)  
32. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
33. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
34. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
35. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
36. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
37. 9X-8399 [2] WASHER (33X56X6-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON INSIDE OF CAB)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300286
 

533-0162: THUMB GP

533-0162 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STIC. FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i07092277 SEBP6230
5330162 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
3. 9X-8399 [2] WASHER (33X56X6-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 212-3095 [1] PLATE  
6. 256-1160 B [6] SHIM (3-MM THK)  
7. 9X-8257 [3] WASHER (17.5X30X3.5-MM THK)  
8. 347-5900 [1] PIN AS  
9. 433-2092 [2] PLATE AS-STOP  
10. 433-2098 [1] PIN  
11. 433-2099 [2] PLATE-CAP  
12. 433-2100 [1] PIN  
13. 438-9382 Y [1] CYLINDER GP-THUMB  
14. 443-0083 [1] PLATE-SPACER  
15. 443-0158 [1] LINK AS-IDLER (RH)  
15A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15B. 187-9587 [1] BUSHING  
16. 443-0160 [1] LINK AS (POWER)  
16A. 3G-8779 [4] BUSHING  
17. 443-0201 [1] THUMB AS  
17A. 285-3254 [1] PLATE (PROTECTOR)  
17B. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
17C. 4I-4542 [2] BUSHING  
18. 510-2280 [1] SPACER (102X190X10-MM THK)  
19. 533-0163 [1] LINK AS-IDLER  
19A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
19B. 187-9587 [1] BUSHING  
20. 533-0164 [1] PIN AS  
21. 533-0165 [2] PIN AS  
    (EACH INCLUDES)
  433-2124 [1] PLATE-RETAINER  
22. 094-3709 [2] PIN  
23. 201-2771 [1] WASHER (26X90X8-MM THK)  
24. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
25. 332-4695 M [4] NUT (M8X1.25-THD)  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 7X-2553 M [3] BOLT (M16X2X40-MM)  
28. 173-9683 M [2] BOLT (M30X3.5X90-MM)  
29. 8T-0359 M [1] BOLT (M16X2X130-MM)  
30. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
33. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
34. 8T-5379 M [1] BOLT (M24X3X50-MM)  
35. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
36. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON THE INSIDE OF CAB)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300287
 

533-0871: THUMB GP

533-0871 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STIC. FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i07092238 SEBP6230
5330871 THUMB GP Parts scheme 5330871 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 222-7101 [2] WASHER (71X130X3-MM THK)  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 386-4110 [1] PIN  
12. 387-0277 [1] LINK AS-IDLER (RH)  
12A. 157-4552 [1] BEARING  
12B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
13. 387-0279 [1] LINK AS (CENTER)  
13A. 7Y-5131 [2] BUSHING  
13B. 117-9432 [2] BUSHING  
14. 394-1764 [1] PIN  
15. 417-0223 Y [1] CYLINDER GP-THUMB  
16. 418-0279 [1] THUMB AS  
16A. 240-2912 [2] BUSHING  
16B. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
16C. 285-3254 [1] PLATE (PROTECTOR)  
16D. 384-3956 [2] CAP-RETAINER  
17. 492-8535 [1] SPACER (72X118X16-MM THK)  
18. 524-9703 [1] LINK AS  
  7Y-3529 [1] TUBE  
19. 524-9704 [1] LINK AS-IDLER (LH)  
19A. 157-4552 [1] BEARING  
19B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
20. 524-9705 [2] PIN AS  
21. 524-9706 [1] PIN AS  
22. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
23. 332-4695 M [4] NUT (M8X1.25-THD)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
32. 8T-5878 M [2] BOLT (M24X3X80-MM)  
33. 8T-6385 M [1] BOLT (M16X2X180-MM)  
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (INSIDE OF THE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300288
 

533-0872: THUMB GP

533-0872 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STICK. FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i07091652 SEBP6230
5330872 THUMB GP Parts scheme 5330872 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 B [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 222-7101 [2] WASHER (71X130X3-MM THK)  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 386-4110 [1] PIN  
12. 387-0277 [1] LINK AS-IDLER (RH)  
12A. 157-4552 [1] BEARING  
12B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
13. 387-0279 [1] LINK AS (CENTER)  
13A. 7Y-5131 [2] BUSHING  
13B. 117-9432 [2] BUSHING  
14. 394-1764 [1] PIN  
15. 417-0223 Y [1] CYLINDER GP-THUMB  
16. 418-0281 [1] THUMB AS  
16A. 240-2912 [2] BUSHING  
16B. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
16C. 285-3254 [1] PLATE (PROTECTOR)  
16D. 384-3956 [2] CAP-RETAINER  
17. 492-8535 [1] SPACER (72X118X16-MM THK)  
18. 524-9703 [1] LINK AS  
  7Y-3529 [1] TUBE  
19. 524-9704 [1] LINK AS-IDLER (LH)  
19A. 157-4552 [1] BEARING  
19B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
20. 524-9705 [2] PIN AS  
21. 524-9706 [1] PIN AS  
22. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
23. 332-4695 M [4] NUT (M8X1.25-THD)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
32. 8T-5878 M [2] BOLT (M24X3X80-MM)  
33. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON INSIDE OF CAB)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300289
 

533-0873: THUMB GP

533-0873 THUMB GP -PIN ON, 5-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STIC. FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i07092253 SEBP6230
5330873 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 B [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 222-7101 [2] WASHER (71X130X3-MM THK)  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 386-4110 [1] PIN  
12. 387-0277 [1] LINK AS-IDLER (RH)  
12A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
12B. 157-4552 [1] BEARING  
13. 387-0279 [1] LINK AS (CENTER)  
13A. 7Y-5131 [2] BUSHING  
13B. 117-9432 [2] BUSHING  
14. 394-1764 [1] PIN  
15. 417-0223 Y [1] CYLINDER GP-THUMB  
16. 418-0283 [1] THUMB AS  
16A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
16B. 240-2912 [2] BUSHING  
16C. 285-3254 [1] PLATE (PROTECTOR)  
16D. 384-3956 [2] CAP-RETAINER  
17. 492-8535 [1] SPACER (72X118X16-MM THK)  
18. 524-9703 [1] LINK AS  
  7Y-3529 [1] TUBE  
19. 524-9704 [1] LINK AS-IDLER (LH)  
19A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
19B. 157-4552 [1] BEARING  
20. 524-9705 [2] PIN AS  
21. 524-9706 [1] PIN AS  
22. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
23. 332-4695 M [4] NUT (M8X1.25-THD)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
32. 8T-5878 M [2] BOLT (M24X3X80-MM)  
33. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON INSIDE OF THE CAB)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Thumb - Lubricate
Hydraulic Thumbs
Stop - Inspect/Replace
Hydraulic Thumbs
Special Instruction
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the <NOBR>418-0310</NOBR> Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0310 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}

Caterpillar Parts SIS Catalog HYDRAULIC :

THUMB GP
512-7795 THUMB GP
THUMB GP
512-7793 THUMB GP
THUMB GP
511-8782 THUMB GP
THUMB GP
509-0619 THUMB GP
THUMB GP
506-0836 THUMB GP
THUMB GP
505-5760 THUMB GP
THUMB GP
503-6357 THUMB GP
THUMB GP
500-5117 THUMB GP
THUMB GP
516-8365 THUMB GP
THUMB GP
517-1282 THUMB GP
THUMB GP
524-9702 THUMB GP
THUMB GP
528-7210 THUMB GP
THUMB GP
532-8815 THUMB GP
THUMB GP
533-0162 THUMB GP
THUMB GP
533-0871 THUMB GP
THUMB GP
533-0872 THUMB GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.