AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

533-0914 THUMB GP -PIN GRABBER, 3-TOOTH S/N THC1-UP REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STICK. FULL ROTATION FOR USE WITH 1397-MM (55-IN) BUCKET HYDRAULIC


WORK TOOLS
THUMB GP

THUMB HYDRAULIC THUMB THC
 Hydraulic Thumbs THC00001-UP (MACHINE) SEBP6230 HYDRAULIC THC   (2012)

WORK TOOLS

THUMB GP
THUMB GP
533-0912 THUMB GP
THUMB GP
533-0913 THUMB GP
THUMB GP
533-0914 THUMB GP
THUMB GP
533-0915 THUMB GP
THUMB GP
533-0916 THUMB GP
THUMB GP
533-0917 THUMB GP
 

#SEBP62300330
 

533-0914: THUMB GP

533-0914 THUMB GP -PIN GRABBER, 3-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STICK. FULL ROTATION
FOR USE WITH 1397-MM (55-IN) BUCKET
i07133836 SEBP6230
5330914 THUMB GP Parts scheme 5330914 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
3. 9X-8399 [2] WASHER (33X56X6-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 212-3095 [1] PLATE  
6. 256-1160 B [8] SHIM (3-MM THK)  
7. 9X-8257 [3] WASHER (17.5X30X3.5-MM THK)  
8. 433-2092 [2] PLATE AS-STOP  
9. 484-2722 [1] PIN AS  
10. 433-2098 [1] PIN  
11. 433-2099 [2] PLATE-CAP  
12. 433-2100 [1] PIN  
13. 442-7956 Y [1] CYLINDER GP-THUMB  
14. 443-0177 [1] LINK AS-IDLER (RH)  
14A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
14B. 187-9587 [1] BUSHING  
15. 443-0179 [1] LINK AS (POWER)  
15A. 3G-8779 [4] BUSHING  
16. 443-0213 [1] THUMB AS  
16A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
16B. 4I-4542 [2] BUSHING  
16C. 285-3254 [1] PLATE (PROTECTOR)  
17. 510-2280 [1] SPACER (102X190X10-MM THK)  
18. 533-0164 [1] PIN AS  
19. 533-0165 [2] PIN AS  
    (EACH INCLUDES)
  433-2124 [1] PLATE-RETAINER  
20. 533-4888 [1] LINK AS-IDLER  
20A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
20B. 187-9587 [1] BUSHING  
21. 094-3709 [2] PIN  
22. 201-2771 [1] WASHER (26X90X8-MM THK)  
23. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
24. 332-4695 M [4] NUT (M8X1.25-THD)  
25. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
26. 7X-2553 M [3] BOLT (M16X2X40-MM)  
27. 173-9683 M [2] BOLT (M30X3.5X90-MM)  
28. 8T-0359 M [1] BOLT (M16X2X130-MM)  
29. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
32. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
33. 8T-5379 M [1] BOLT (M24X3X50-MM)  
34. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
35. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON INSIDE OF THE CAB)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300331
 

533-0915: THUMB GP

533-0915 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STICK. FULL ROTATION
FIELD REPLACEMENT FOR 1549-MM (61-IN) BUCKET
i07091484 SEBP6230
5330915 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 212-3095 [1] PLATE  
6. 256-1160 B [8] SHIM (3-MM THK)  
8. 433-2092 [2] PLATE AS-STOP  
9. 484-2722 [1] PIN AS  
10. 433-2098 [1] PIN  
11. 433-2099 [2] PLATE-CAP  
12. 433-2100 [1] PIN  
13. 442-7956 Y [1] CYLINDER GP-THUMB  
14. 443-0177 [1] LINK AS-IDLER (RH)  
14A. 187-9587 [1] BUSHING  
14B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15. 443-0179 [1] LINK AS (POWER)  
15A. 3G-8779 [4] BUSHING  
16. 443-0215 [1] THUMB AS  
16A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
16B. 4I-4542 [2] BUSHING  
16C. 285-3254 [1] PLATE (PROTECTOR)  
17. 510-2280 [1] SPACER (102X190X10-MM THK)  
18. 533-0164 [1] PIN AS  
19. 533-0165 [2] PIN AS  
    (EACH INCLUDES)
  433-2124 [1] PLATE-RETAINER  
20. 533-4888 [1] LINK AS-IDLER  
20A. 187-9587 [1] BUSHING  
20B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
21. 094-3709 [2] PIN  
22. 201-2771 [1] WASHER (26X90X8-MM THK)  
23. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
24. 332-4695 M [4] NUT (M8X1.25-THD)  
25. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
26. 7X-2553 M [3] BOLT (M16X2X40-MM)  
27. 173-9683 M [2] BOLT (M30X3.5X90-MM)  
28. 8T-0359 M [1] BOLT (M16X2X130-MM)  
29. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
32. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
33. 8T-5379 M [1] BOLT (M24X3X50-MM)  
34. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
35. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
36. 9X-8257 [3] WASHER (17.5X30X3.5-MM THK)  
37. 9X-8399 [2] WASHER (33X56X6-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON INSIDE OF CAB)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300332
 

533-0916: THUMB GP

533-0916 THUMB GP -PIN GRABBER, 5-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STICK. FULL ROTATION
FOR USE WITH 1524-MM (60-IN) BUCKET
i07133831 SEBP6230
5330916 THUMB GP Parts scheme 5330916 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
3. 9X-8399 [2] WASHER (33X56X6-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 212-3095 [1] PLATE  
6. 256-1160 [8] SHIM (3-MM THK)  
7. 9X-8257 [3] WASHER (17.5X30X3.5-MM THK)  
8. 433-2092 [2] PLATE AS-STOP  
9. 484-2722 [1] PIN AS  
10. 433-2098 [1] PIN  
11. 433-2099 [2] PLATE-CAP  
12. 433-2100 [1] PIN  
13. 442-7956 Y [1] CYLINDER GP-THUMB  
14. 443-0177 [1] LINK AS-IDLER (RH)  
14A. 187-9587 [1] BUSHING  
14B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15. 443-0179 [1] LINK AS (POWER)  
15A. 3G-8779 [4] BUSHING  
16. 443-0241 [1] THUMB AS  
16A. 4I-4542 [2] BUSHING  
16B. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
16C. 285-3254 [1] PLATE (PROTECTOR)  
17. 510-2280 [1] SPACER (102X190X10-MM THK)  
18. 533-0164 [1] PIN AS  
19. 533-0165 [2] PIN AS  
    (EACH INCLUDES)
  433-2124 [1] PLATE-RETAINER  
20. 533-4888 [1] LINK AS-IDLER  
20A. 187-9587 [1] BUSHING  
20B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
21. 094-3709 [2] PIN  
22. 201-2771 [1] WASHER (26X90X8-MM THK)  
23. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
24. 332-4695 M [4] NUT (M8X1.25-THD)  
25. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
26. 7X-2553 M [3] BOLT (M16X2X40-MM)  
27. 173-9683 M [2] BOLT (M30X3.5X90-MM)  
28. 8T-0359 M [1] BOLT (M16X2X130-MM)  
29. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
32. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
33. 8T-5379 M [1] BOLT (M24X3X50-MM)  
34. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
35. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (INSIDE OF THE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300333
 

533-0917: THUMB GP

533-0917 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STICK. FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i07133826 SEBP6230
5330917 THUMB GP Parts scheme 5330917 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 115-4547 [2] WASHER (85X140X6-MM THK)  
3. 9X-8399 [2] WASHER (33X56X6-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 212-3095 [1] PLATE  
6. 256-1160 [8] SHIM (3-MM THK)  
7. 9X-8257 [3] WASHER (17.5X30X3.5-MM THK)  
8. 433-2092 [2] PLATE AS-STOP  
9. 484-2722 [1] PIN AS  
10. 433-2098 [1] PIN  
11. 433-2099 [2] PLATE-CAP  
12. 433-2100 [1] PIN  
13. 442-7956 Y [1] CYLINDER GP-THUMB  
14. 443-0177 [1] LINK AS-IDLER (RH)  
14A. 187-9587 [1] BUSHING  
14B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
15. 443-0179 [1] LINK AS (POWER)  
15A. 3G-8779 [4] BUSHING  
16. 473-9855 [1] THUMB AS  
16A. 4I-4542 [2] BUSHING  
16B. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
16C. 285-3254 [1] PLATE (PROTECTOR)  
17. 510-2280 [1] SPACER (102X190X10-MM THK)  
18. 533-0164 [1] PIN AS  
19. 533-0165 [2] PIN AS  
    (EACH INCLUDES)
  433-2124 [1] PLATE-RETAINER  
20. 533-4888 [1] LINK AS-IDLER  
20A. 187-9587 [1] BUSHING  
20B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
21. 094-3709 [2] PIN  
22. 201-2771 [1] WASHER (26X90X8-MM THK)  
23. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
24. 332-4695 M [4] NUT (M8X1.25-THD)  
25. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
26. 7X-2553 M [3] BOLT (M16X2X40-MM)  
27. 173-9683 M [2] BOLT (M30X3.5X90-MM)  
28. 8T-0359 M [1] BOLT (M16X2X130-MM)  
29. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [1] LOCKNUT (M16X2-THD)  
32. 8T-5065 M [2] LOCKNUT (M30X3.5-THD)  
33. 8T-5379 M [1] BOLT (M24X3X50-MM)  
34. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
35. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (INSIDE OF THE CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300334
 

533-0918: THUMB GP

533-0918 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STICK. FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i07091663 SEBP6230
5330918 THUMB GP Parts scheme 5330918 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 137-8479 B [4] SHIM (2-MM THK)  
4. 159-8036 [1] FILM-WARNING (READ OMM)  
5. 222-7101 [2] WASHER (71X130X3-MM THK)  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3910 [2] PLATE AS-STOP  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 387-0277 [1] LINK AS-IDLER (RH)  
11A. 157-4552 [1] BEARING  
11B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
12. 387-0279 [1] LINK AS (CENTER)  
12A. 7Y-5131 [2] BUSHING  
12B. 117-9432 [2] BUSHING  
13. 394-1764 [1] PIN  
14. 417-0223 Y [1] CYLINDER GP-THUMB  
15. 456-8296 [1] THUMB AS  
15A. 386-4113 [4] PLATE (TOOTH)  
  418-1306 [1] FRAME AS  
15B. 240-2912 [2] BUSHING  
15C. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
15D. 285-3254 [1] PLATE (PROTECTOR)  
15E. 384-3956 [2] CAP-RETAINER  
16. 484-2149 [1] PIN  
17. 492-8535 [1] SPACER (72X118X16-MM THK)  
18. 524-9703 [1] LINK AS  
  7Y-3529 [1] TUBE  
19. 524-9704 [1] LINK AS-IDLER (LH)  
19A. 157-4552 [1] BEARING  
19B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
20. 524-9705 [2] PIN AS  
21. 524-9706 [1] PIN AS  
22. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
23. 332-4695 M [4] NUT (M8X1.25-THD)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [3] LOCKNUT (M16X2-THD)  
32. 8T-5878 M [2] BOLT (M24X3X80-MM)  
33. 8T-6385 M [1] BOLT (M16X2X180-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON INSIDE OF CAB)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300335
 

536-8786: THUMB GP

536-8786 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STICK. FULL ROTATION
FOR USE WITH 1066-MM (42-IN) BUCKET
i07092283 SEBP6230
5368786 THUMB GP Parts scheme 5368786 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 313-4425 [1] LINK AS  
7. 313-4426 [1] PIN AS  
8. 384-3906 [1] LINK AS-IDLER (RH)  
8A. 157-4552 [1] BEARING  
8B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
9. 384-3907 [1] LINK AS-IDLER (LH)  
9A. 157-4552 [1] BEARING  
9B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
10. 384-3908 [1] LINK AS (CENTER)  
10A. 7Y-5131 [4] BUSHING  
11. 384-3910 [2] PLATE AS-STOP  
12. 384-3911 [2] PIN AS  
13. 384-3913 [2] PLATE-CAP  
14. 384-3914 [1] PIN  
15. 384-4034 [1] TUBE-RETAINER  
16. 394-1764 [1] PIN  
17. 394-1765 [1] PIN AS  
18. 417-0226 Y [1] CYLINDER GP-THUMB  
19. 536-8787 [1] THUMB AS  
19A. 147-5838 [2] BUSHING  
19B. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
19C. 384-3956 [2] CAP-RETAINER  
19D. 285-3254 [1] PLATE (PROTECTOR)  
20. 093-0349 [1] WASHER (22X60X6-MM THK)  
21. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
22. 332-4695 M [4] NUT (M8X1.25-THD)  
23. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
24. 6V-7676 M [2] NUT (M24X3-THD)  
25. 6Y-2266 [2] PIN  
26. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
27. 8T-4173 M [1] BOLT (M16X2X110-MM)  
28. 8T-4174 M [1] BOLT (M16X2X120-MM)  
29. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
30. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
31. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
32. 8T-5878 M [2] BOLT (M24X3X80-MM)  
33. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON INSIDE OF CAB)
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300336
 

544-0488: THUMB GP

544-0488 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i07171666 SEBP6230
5440488 THUMB GP Parts scheme 5440488 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 8T-4132 M [2] NUT (M16X2-THD)  
3. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
4. 137-8479 B [6] SHIM (2-MM THK)  
5. 159-8036 [1] FILM-WARNING (READ OMM)  
6. 222-7101 [2] WASHER (71X130X3-MM THK)  
7. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
8. 313-4426 [1] PIN AS  
9. 384-3906 [1] LINK AS-IDLER (RH)  
9A. 157-4552 [1] BEARING  
9B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
10. 384-3907 [1] LINK AS-IDLER (LH)  
10A. 157-4552 [1] BEARING  
10B. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
11. 384-3908 [1] LINK AS (CENTER)  
11A. 7Y-5131 [4] BUSHING  
12. 384-3910 [2] PLATE AS-STOP  
13. 384-3911 [2] PIN AS  
14. 384-3913 [2] PLATE-CAP  
15. 384-3914 [1] PIN  
16. 384-4034 [1] TUBE-RETAINER  
17. 384-4417 [1] PIN  
18. 384-7888 [1] LINK AS-IDLER  
  7Y-3529 [1] TUBE  
19. 394-1764 [1] PIN  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. [1] THUMB AS  
21A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
21B. 240-2912 [2] BUSHING  
21C. 285-3254 [1] PLATE (PROTECTOR)  
21D. 384-3956 [2] CAP-RETAINER  
22. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
23. 332-4695 M [4] NUT (M8X1.25-THD)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5878 M [2] BOLT (M24X3X80-MM)  
33. 8T-6383 M [1] BOLT (M16X2X200-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
    (ON THE INSIDE OF CAB)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300337
 

559-5500: THUMB GP

559-5500 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i07487620 SEBP6230
5595500 THUMB GP Parts scheme 5595500 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 263-9600 [6] SPACER  
5. 384-3908 [1] LINK AS (CENTER)  
5A. 7Y-5131 [4] BUSHING  
6. 384-4034 [1] TUBE-RETAINER  
7. 417-0226 Y [1] CYLINDER GP-THUMB  
8. 418-0441 [1] THUMB AS  
8A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
8B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
9. 093-0349 [1] WASHER (22X60X6-MM THK)  
10. 222-7101 [2] WASHER (71X130X3-MM THK)  
11. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
12. 8T-5878 M [2] BOLT (M24X3X80-MM)  
13. 332-4695 M [4] NUT (M8X1.25-THD)  
14. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
14A. 157-4552 [1] BEARING  
15. 384-3910 [2] PLATE AS-STOP  
16. 384-3913 [2] PLATE-CAP  
17. 384-3914 [1] PIN  
18. 394-1764 [1] PIN  
19. 394-1765 [1] PIN AS  
20. 517-2510 [1] SPACER (72X130X18-MM THK)  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300338
 

559-5501: THUMB GP

559-5501 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i07488494 SEBP6230
5595501 THUMB GP Parts scheme 5595501 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0443 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-5878 M [2] BOLT (M24X3X80-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300339
 

559-5502: THUMB GP

559-5502 THUMB GP -PIN ON, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i07488520 SEBP6230
5595502 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 263-9600 [6] SPACER  
5. 384-3908 [1] LINK AS (CENTER)  
5A. 7Y-5131 [4] BUSHING  
6. 384-4034 [1] TUBE-RETAINER  
7. 418-0445 [1] THUMB AS  
7A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
7B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
8. 093-0349 [1] WASHER (22X60X6-MM THK)  
9. 222-7101 [2] WASHER (71X130X3-MM THK)  
10. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
11. 8T-5878 M [2] BOLT (M24X3X80-MM)  
12. 332-4695 M [4] NUT (M8X1.25-THD)  
13. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
13A. 157-4552 [1] BEARING  
14. 384-3910 [2] PLATE AS-STOP  
15. 384-3913 [2] PLATE-CAP  
16. 384-3914 [1] PIN  
17. 394-1764 [1] PIN  
18. 394-1765 [1] PIN AS  
19. 417-0226 Y [1] CYLINDER GP-THUMB  
20. 517-2510 [1] SPACER (72X130X18-MM THK)  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Thumb - Lubricate
Hydraulic Thumbs
Stop - Inspect/Replace
Hydraulic Thumbs
Special Instruction
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the <NOBR>418-0310</NOBR> Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0310 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}

Caterpillar Parts SIS Catalog HYDRAULIC :

THUMB GP
533-0913 THUMB GP
THUMB GP
533-0912 THUMB GP
THUMB GP
533-0911 THUMB GP
THUMB GP
533-0910 THUMB GP
THUMB GP
533-0909 THUMB GP
THUMB GP
533-0908 THUMB GP
THUMB GP
533-0907 THUMB GP
THUMB GP
533-0906 THUMB GP
THUMB GP
533-0915 THUMB GP
THUMB GP
533-0916 THUMB GP
THUMB GP
533-0917 THUMB GP
THUMB GP
533-0918 THUMB GP
THUMB GP
536-8786 THUMB GP
THUMB GP
544-0488 THUMB GP
THUMB GP
559-5500 THUMB GP
THUMB GP
559-5501 THUMB GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.