AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

559-5515 THUMB GP -PIN GRABBER, 5-TOOTH S/N THC1-UP FULL ROTATION FOR USE WITH 1219-MM (48-IN) BUCKET HYDRAULIC


WORK TOOLS
THUMB GP

THUMB HYDRAULIC THUMB THC
 Hydraulic Thumbs THC00001-UP (MACHINE) SEBP6230 HYDRAULIC THC   (2012)

WORK TOOLS

THUMB GP
THUMB GP
559-5512 THUMB GP
THUMB GP
559-5514 THUMB GP
THUMB GP
559-5515 THUMB GP
THUMB GP
559-5516 THUMB GP
THUMB GP
559-5517 THUMB GP
THUMB GP
559-5518 THUMB GP
 

#SEBP62300350
 

559-5515: THUMB GP

559-5515 THUMB GP -PIN GRABBER, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i07489828 SEBP6230
5595515 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0463 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-5878 M [2] BOLT (M24X3X80-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300351
 

559-5516: THUMB GP

559-5516 THUMB GP -PIN GRABBER, 6-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i07489848 SEBP6230
5595516 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 263-9600 [6] SPACER  
5. 384-3908 [1] LINK AS (CENTER)  
5A. 7Y-5131 [4] BUSHING  
6. 384-4034 [1] TUBE-RETAINER  
7. 418-0465 [1] THUMB AS  
7A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
7B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
8. 093-0349 [1] WASHER (22X60X6-MM THK)  
9. 222-7101 [2] WASHER (71X130X3-MM THK)  
10. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
11. 8T-5878 M [2] BOLT (M24X3X80-MM)  
12. 332-4695 M [4] NUT (M8X1.25-THD)  
13. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
13A. 157-4552 [1] BEARING  
14. 384-3910 [2] PLATE AS-STOP  
15. 384-3913 [2] PLATE-CAP  
16. 384-3914 [1] PIN  
17. 394-1764 [1] PIN  
18. 394-1765 [1] PIN AS  
19. 417-0226 Y [1] CYLINDER GP-THUMB  
20. 517-2510 [1] SPACER (72X130X18-MM THK)  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300352
 

559-5517: THUMB GP

559-5517 THUMB GP -PIN GRABBER, 3-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i07489868 SEBP6230
5595517 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0467 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-5878 M [2] BOLT (M24X3X80-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300353
 

559-5518: THUMB GP

559-5518 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i07489889 SEBP6230
5595518 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0469 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-5878 M [2] BOLT (M24X3X80-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300354
 

559-5519: THUMB GP

559-5519 THUMB GP -PIN GRABBER, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i07489904 SEBP6230
5595519 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0471 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-5878 M [2] BOLT (M24X3X80-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300355
 

559-5520: THUMB GP

559-5520 THUMB GP -PIN GRABBER, 6-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1524-MM (60-IN) BUCKET
i07489924 SEBP6230
5595520 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0473 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-5878 M [2] BOLT (M24X3X80-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300356
 

559-5521: THUMB GP

559-5521 THUMB GP -PIN GRABBER, 6-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1676-MM (66-IN) BUCKET
i07489948 SEBP6230
5595521 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)(BUCKET)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
7. 384-3906 [1] LINK AS-IDLER (RH)  
7A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
7B. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS (STICK)  
14. 418-0475 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 285-3254 [1] PLATE (PROTECTOR)  
14D. 384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER (LH)  
22A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
22B. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS (CYLINDER)  
24. 559-5288 [1] PIN AS (IDLER)  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
34. 8T-5878 M [2] BOLT (M24X3X80-MM)  
35. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
36. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300357
 

559-5522: THUMB GP

559-5522 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
REQUIRES COMPATIBLE BRACKET AND REINFORCEMENT PLATE OR THUMB READY STICK. FULL ROTATION
FOR USE WITH 1066-MM (42-IN) BUCKET
i07490949 SEBP6230
5595522 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)(BUCKET)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 384-3906 [1] LINK AS-IDLER (RH)  
6A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
6B. 157-4552 [1] BEARING  
7. 384-3908 [1] LINK AS (CENTER)  
7A. 7Y-5131 [4] BUSHING  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS (STICK)  
13. 517-2510 [1] SPACER (72X130X18-MM THK)  
14. 536-8787 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
14C. 285-3254 [1] PLATE (PROTECTOR)  
14D. 384-3956 [2] CAP-RETAINER  
15. 093-0349 [1] WASHER (22X60X6-MM THK)  
16. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
17. 332-4695 M [4] NUT (M8X1.25-THD)  
18. 384-3910 [2] PLATE AS-STOP  
20. 559-5265 [1] LINK AS  
21. 559-5275 [1] LINK AS-IDLER (LH)  
21A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
21B. 157-4552 [1] BEARING  
22. 559-5285 [2] PIN AS (CYLINDER)  
23. 559-5288 [1] PIN AS (IDLER)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
34. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
35. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
36. 417-0226 Y [1] CYLINDER GP-THUMB  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300358
 

559-5523: THUMB GP

559-5523 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i07490960 SEBP6230
5595523 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)(BUCKET)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 384-3906 [1] LINK AS-IDLER (RH)  
6A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
6B. 157-4552 [1] BEARING  
7. 384-3908 [1] LINK AS (CENTER)  
7A. 7Y-5131 [4] BUSHING  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS (STICK)  
13. 421-7323 [1] THUMB AS  
13A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
13B. 147-5838 [2] BUSHING  
13C. 285-3254 [1] PLATE (PROTECTOR)  
13D. 384-3956 [2] CAP-RETAINER  
14. 517-2510 [1] SPACER (72X130X18-MM THK)  
15. 093-0349 [1] WASHER (22X60X6-MM THK)  
16. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
17. 332-4695 M [4] NUT (M8X1.25-THD)  
18. 384-3910 [2] PLATE AS-STOP  
19. 417-0226 Y [1] CYLINDER GP-THUMB  
20. 559-5265 [1] LINK AS  
21. 559-5275 [1] LINK AS-IDLER (LH)  
21A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
21B. 157-4552 [1] BEARING  
22. 559-5285 [2] PIN AS (CYLINDER)  
23. 559-5288 [1] PIN AS (IDLER)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
34. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
35. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300359
 

559-5524: THUMB GP

559-5524 THUMB GP -PIN GRABBER, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i07490976 SEBP6230
5595524 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 384-3906 [1] LINK AS-IDLER (RH)  
6A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
6B. 157-4552 [1] BEARING  
7. 384-3908 [1] LINK AS (CENTER)  
7A. 7Y-5131 [4] BUSHING  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS (STICK)  
13. 517-1283 [1] THUMB AS  
13A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
13B. 147-5838 [2] BUSHING  
13C. 285-3254 [1] PLATE (PROTECTOR)  
13D. 384-3956 [2] CAP-RETAINER  
14. 517-2510 [1] SPACER (72X130X18-MM THK)  
15. 093-0349 [1] WASHER (22X60X6-MM THK)  
16. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
17. 332-4695 M [4] NUT (M8X1.25-THD)  
18. 384-3910 [2] PLATE AS-STOP  
19. 417-0226 Y [1] CYLINDER GP-THUMB  
20. 559-5265 [1] LINK AS  
21. 559-5275 [1] LINK AS-IDLER (LH)  
21A. 8Y-7023 M [1] BOSS (M12X1.75-MM)  
21B. 157-4552 [1] BEARING  
22. 559-5285 [2] PIN AS (CYLINDER)  
23. 559-5288 [1] PIN AS (IDLER)  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
34. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
35. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Thumb - Lubricate
Hydraulic Thumbs
Stop - Inspect/Replace
Hydraulic Thumbs
Special Instruction
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the <NOBR>418-0310</NOBR> Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0310 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}

Caterpillar Parts SIS Catalog HYDRAULIC :

THUMB GP
559-5514 THUMB GP
THUMB GP
559-5512 THUMB GP
THUMB GP
559-5511 THUMB GP
THUMB GP
559-5510 THUMB GP
THUMB GP
559-5509 THUMB GP
THUMB GP
559-5508 THUMB GP
THUMB GP
559-5507 THUMB GP
THUMB GP
559-5506 THUMB GP
THUMB GP
559-5516 THUMB GP
THUMB GP
559-5517 THUMB GP
THUMB GP
559-5518 THUMB GP
THUMB GP
559-5519 THUMB GP
THUMB GP
559-5520 THUMB GP
THUMB GP
559-5521 THUMB GP
THUMB GP
559-5522 THUMB GP
THUMB GP
559-5523 THUMB GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.