396-6983 ALTERNATOR GP-CHARGING S/N D7A1-UP PART OF 417-3389 ENGINE AR-PRIMARY 320D2 EXCAVATOR

Pos.	Part No	Qty	Parts name
1.	329-5254	[1]	PULLEY (12-GROOVE)
2.	344-1722	[1]	TENSIONER-BELT
3.	344-5081	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 115-AMPERE)
4.	100-4463 M	[1]	BOLT (M10X1.5X80-MM)
5.	164-7468 M	[4]	BOLT (M10X1.5X95-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP62400101

399-3647: BATTERY & WIRING GP

BATTERY & WIRING GP

399-3647 BATTERY & WIRING GP
S/N DFM1-UP
PART OF 394-7461 CHASSIS AR

i05361769 SEBP6240

3993647 BATTERY & WIRING GP Parts scheme

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-5760	[2]	BATTERY GP (12-VOLT, 750-CCA)
			(EACH INCLUDES)
	123-1373	[6]	CAP AS-FILLER (7/8-9-THD)
2.	5I-8270	[1]	COVER-BATTERY
3.	6W-6005	[1]	HOLD-DOWN-BATTERY
4.	132-1805	[1]	STRAP AS-GROUND
5.	134-3355	[2]	STRAP AS
6.	170-6929	[1]	CABLE AS
	159-8049 E		CABLE (00-GA, RED)(31-CM)
	9G-0002	[1]	COVER AS-TERMINAL (RED)
	9G-0005	[1]	COVER AS-TERMINAL (BLACK)
			(EACH COVER AS INCLUDES)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	8C-5918	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	8T-9756	[1]	TERMINAL AS-BATTERY (POSITIVE)
			(EACH TERMINAL AS INCLUDES)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
7.	231-1827	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(23-CM)
	9G-0003	[1]	COVER AS-TERMINAL (BLACK)(BATTERY NEGATIVE)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	9G-8909	[1]	COVER-TERMINAL (BLACK)(JUNCTION BLOCK)
	8T-9757	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
8.	238-2501	[1]	KNOB
9.	238-2528	[1]	ROD
10.	286-6192	[1]	SPACER (11X40X25-MM THK)
11.	388-6748	[1]	BRACKET AS
12.	388-6760	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	6V-2722 D		TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)
	8N-0869	[1]	COVER-TERMINAL (RED)(STARTING MOTOR)
	9G-0004	[1]	COVER AS-TERMINAL (RED)(BATTERY POSITIVE)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	8C-5917	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	159-8049 E		CABLE (00-GA, RED)(239-CM)
13.	091-9035	[1]	SPACER (11X25X20-MM THK)
14.	2G-8767	[3]	WASHER (10.5X60X3-MM THK)
15.	4K-8864	[1]	CLIP (LOOP)
16.	5C-7261 M	[1]	NUT (M8X1.25-THD)
17.	6G-2256	[2]	CLAMP
18.	6G-2263	[2]	SPACER (10.5X19X28.5-MM THK)
19.	6K-8178	[3]	CLIP (LOOP)
20.	7X-7729	[2]	WASHER (11X25X3-MM THK)
21.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
22.	8T-4133 M	[1]	NUT (M10X1.5-THD)
23.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
24.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
25.	8T-4178 M	[1]	BOLT (M10X1.5X90-MM)
26.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
27.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
28.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP62400102

309-5842: CONTROL & MTG GP-COMMUNICATION

CONTROL & MTG GP-COMMUNICATION

309-5842 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 321SR
S/N DFM1-UP
PART OF 298-4115 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i04762149 SEBP6240

3095842 CONTROL & MTG GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
2.	9X-9896	[8]	MOUNT (ISOLATION)
3.	260-2042	[1]	BRACKET AS
4.	262-1421 Y	[1]	ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300)
5.	8C-8451 M	[4]	BOLT (M6X1X40-MM)
6.	9X-6165	[4]	WASHER (6.5X22X2.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP62400103

309-5881: CONTROL & MTG GP-COMMUNICATION

CONTROL & MTG GP-COMMUNICATION

309-5881 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 121SR
S/N DFM1-UP
PART OF 298-4115 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i04762158 SEBP6240

3095881 CONTROL & MTG GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	7K-1181	[3]	STRAP-CABLE
3.	263-9088 Y	[1]	RADIO GP-COMMUNICATION (PRODUCT LINK 121SR)
4.	111-4836	[1]	CLIP
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
7.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
8.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
9.	230-1340	[1]	FILM-WARNING (PRODUCT LINK RADIO, U.S.)
			-OR-
	230-1341	[1]	FILM-WARNING (PRODUCT LINK RADIO, INTL)
10.	307-0047	[1]	FILM-INFORMATION (PRODUCT LINK, READ OMM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP62400104

221-8872: CONTROL & MTG GP-MACHINE

CONTROL & MTG GP-MACHINE

221-8872 CONTROL & MTG GP-MACHINE
S/N DFM1-UP
PART OF 383-5750 OPERATOR AR

i02835433 SEBP6240

2218872 CONTROL & MTG GP-MACHINE Parts scheme

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	366-8821	[1]	CONTROL GP-UNPROGRAMMED
2.	7X-2534 M	[4]	BOLT (M6X1X50-MM)
3.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP62400105

262-1421: ELECTRONICS GP-COMMUNICATION

ELECTRONICS GP-COMMUNICATION

262-1421 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 300
S/N DFM1-UP
PART OF 309-5842 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT

i04762159 SEBP6240

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
285-1133		CONTROL GP-UNPROGRAMMED (PRODUCT LINK 300)
7X-6315	[1]	STRAP AS-GROUND
101-0852	[1]	SCREW-PAN HEAD (8-32X0.375-IN)
134-4126	[1]	WASHER (4.52X8.28X0.76-MM THK)
476-1913	[1]	SOFTWARE GP-COMMUNICATION

#SEBP62400106

383-5108: ELECTRONICS GP-MACHINE

ELECTRONICS GP-MACHINE

383-5108 ELECTRONICS GP-MACHINE
S/N DFM1-UP
PART OF 394-7458 GENERAL AR

i05362769 SEBP6240

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	479-7834	[1]	SOFTWARE GP-MACHINE

#SEBP62400107

221-8861: ELECTRONICS GP-MONITOR

ELECTRONICS GP-MONITOR

221-8861 ELECTRONICS GP-MONITOR
S/N DFM1-UP
PART OF 394-7458 GENERAL AR

i02832470 SEBP6240

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
386-3454	[1]	SOFTWARE GP-MONITOR
		-OR-
386-3458 Y	[1]	SERVICE GP-MONITOR
		(OPTIONAL SERVICE REPLACEMENT)(INCLUDES MONITOR GP & SOFTWARE)
Y		SEPARATE ILLUSTRATION

#SEBP62400108

440-4822: HARNESS AS-CONTROL

HARNESS AS-CONTROL

440-4822 HARNESS AS-CONTROL
S/N DFM1-UP
PRODUCT LINK 321SR
PART OF 267-8007 WIRING GP-COMMUNICATION
AN ATTACHMENT

i05876001 SEBP6240

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
126-1774	[1]	COVER-CONNECTOR
8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
		(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
159-9322	[1]	SEAL-O-RING
8T-8737	[62]	PLUG-SEAL
243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
9X-3402	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[20]	SOCKET-CONNECTOR (14-GA TO 16-GA)
3S-2093	[3]	STRAP-CABLE
2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
E		ORDER BY THE CENTIMETER

#SEBP62400109

238-1579: HARNESS AS-PUMP

HARNESS AS-PUMP

238-1579 HARNESS AS-PUMP
S/N DFM1-UP
PART OF 238-1570 WIRING GP-REFUELING PUMP
AN ATTACHMENT

i06530647 SEBP6240

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
149-5051	[2]	CONNECTOR-RECEPTACLE
197-4385	[1]	DIODE
116-0126	[1]	HOUSING-PLUG
121-1038	[1]	HOUSING-RECEPTACLE
8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
		(EACH INCLUDES)
455-0704	[1]	SEAL-CONNECTOR
8T-8737	[1]	PLUG-SEAL
243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
116-0128	[2]	SEAL
8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
3S-2093	[3]	STRAP-CABLE
121-1039	[2]	TERMINAL (MALE)
131-1494	[1]	TERMINAL AS
2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
131-1496	[2]	TERMINAL AS
		(EACH INCLUDES)
2L-8067	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
131-1502	[1]	TERMINAL AS
2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
131-1504	[1]	TERMINAL AS
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
E		ORDER BY THE CENTIMETER