ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP62400140
388-6699: WIRING GP-CAB
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [7] | STRAP-CABLE | |
| 3. | 7Y-5505 | [2] | SPEAKER AS | |
| (EACH INCLUDES) | ||||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3954 | [1] | CONNECTOR-PLUG (3-PIN) | ||
| 4. | 9W-0335 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
| 5. | 099-7127 M | [8] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 6. | 113-8490 | [20] | FUSE (10-AMPERE) | |
| 7. | 113-8491 | [5] | FUSE (15-AMPERE) | |
| 8. | 113-8492 | [3] | FUSE (20-AMPERE) | |
| 9. | 113-8493 | [3] | FUSE (25-AMPERE) | |
| 10. | 116-0210 | [4] | BRACKET AS | |
| 11. | 124-3548 | [2] | FUSE (30-AMPERE) | |
| 12. | 132-1829 Y | [1] | ALARM GP (24-VOLT)(FAULT) | |
| 13. | 141-2759 | [7] | FUSE (5-AMPERE) | |
| 14. | 161-3128 | [1] | RELAY (24-VOLT)(BOOM LIGHTS) | |
| 14A. | 161-3128 | [1] | RELAY (24-VOLT)(CHASSIS LIGHT) | |
| 14B. | 161-3128 | [1] | RELAY (24-VOLT)(CAB LIGHT) | |
| 14C. | 161-3128 | [1] | RELAY (24-VOLT)(HORN) | |
| 14D. | 161-3128 | [1] | RELAY (24-VOLT)(NEUTRAL START) | |
| 14E. | 161-3128 | [1] | RELAY (24-VOLT)(TRAVEL ALARM) | |
| 14F. | 161-3128 | [1] | RELAY (24-VOLT)(PUMP) | |
| 15. | 163-6758 | [1] | WIRE AS | |
| 16. | 163-6795 | [15] | STRAP-CABLE | |
| 17. | 167-3593 | [1] | STRAP | |
| 18. | 170-6888 | [1] | PULLER-FUSE | |
| 19. | 213-0772 | [1] | SWITCH AS-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 20. | 227-7575 | [1] | PANEL-CONTROL (SWITCH) | |
| 21. | 234-1097 | [1] | BRACKET | |
| 22. | 238-2212 J | [1] | SWITCH AS-ROCKER (FINE SWING) | |
| 167-3542 | [1] | RECEPTACLE-CONNECTOR (5-PIN) | ||
| 167-3543 | [5] | TERMINAL (MALE) | ||
| 23. | 238-2390 | [1] | CABLE AS (RED) | |
| 6V-2369 D | CABLE (4-GA, BLACK)(0.3-M) | |||
| 9G-4343 | [2] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 24. | 238-2391 | [1] | CABLE AS (PURPLE) | |
| 6V-2369 D | CABLE (4-GA, BLACK)(0.3-M) | |||
| 9G-4343 | [2] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 25. | 245-7760 | [8] | INSULATION | |
| 26. | 251-0637 | [1] | INSULATION | |
| 27. | 259-4883 | [1] | ANTENNA AS | |
| 259-5081 | [1] | ROD | ||
| 259-5082 | [1] | CABLE AS | ||
| 28. | 366-4622 | [1] | KIT-SERVICE METER (32-VOLT DC) | |
| (INCLUDES SERVICE METER & FILM) | ||||
| 29. | 441-4020 | [1] | HARNESS AS-CAB | |
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [100] | STRAP-CABLE | ||
| 7Y-3950 | [4] | TERMINAL-BLADE (14-GA TO 20-GA) | ||
| 7Y-3951 | [13] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [4] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3955 | [2] | CONNECTOR-RECEPTACLE | ||
| 7Y-3958 | [1] | CONNECTOR-PLUG (6-PIN) | ||
| 7Y-3966 | [2] | TERMINAL AS | ||
| 7Y-3967 | [10] | TERMINAL AS | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8T-8737 | [17] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 102-7964 | [2] | PLUG-CONNECTOR (16-PIN) | ||
| 102-7965 | [65] | TERMINAL (FEMALE) | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 111-4816 | [1] | PLUG-CONNECTOR (13-PIN) | ||
| 116-0255 | [1] | TERMINAL-BLADE (10-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM) | |||
| 121-1022 | [3] | DIODE | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [13] | TERMINAL (MALE) | ||
| 125-4840 | [1] | WEDGE-PLUG LOCK (13-PIN) | ||
| 125-4841 | [2] | WEDGE-PLUG LOCK (21-PIN) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM) | |||
| 9X-3402 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [16] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8065 | [3] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8066 | [2] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 2L-8067 | [6] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8076 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 128-8950 | [1] | CONNECTOR-RECEPTACLE | ||
| 5P-2321 | [1] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 176-9299 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 134-3296 | [1] | HOUSING-PLUG | ||
| 134-3297 | [1] | SEAL | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 149-5069 | [8] | TERMINAL-BLADE (14-GA TO 20-GA) | ||
| 149-5070 | [16] | TERMINAL-BLADE (16-GA TO 20-GA) | ||
| 149-5071 | [8] | TERMINAL-BLADE (12-GA TO 14-GA) | ||
| 153-2602 | [3] | RECEPTACLE-CONNECTOR (1-PIN) | ||
| 153-2631 | [3] | TERMINAL (14-GA TO 20-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 163-6659 | [1] | CONNECTOR-PLUG (12-PIN) | ||
| 163-6699 | [1] | CONNECTOR-PLUG (18-PIN) | ||
| 163-6790 | [22] | TERMINAL (FEMALE) | ||
| 163-6803 | [6] | PLUG-CONNECTOR (5-PIN) | ||
| 167-3487 | [6] | WEDGE-PLUG LOCK (5-PIN) | ||
| 167-3630 | [1] | CONNECTOR-PLUG | ||
| 167-3631 | [2] | TERMINAL (FEMALE) | ||
| 170-6890 | [5] | TERMINAL-BLADE (14-GA) | ||
| 170-6891 | [23] | TERMINAL-BLADE (16-GA TO 18-GA) | ||
| 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 238-2319 | [1] | BASE AS (FUSE, RELAY PANEL) | ||
| 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | ||
| 095-0742 M | [2] | SCREW-MACHINE (M6X1X16-MM) | ||
| 170-9394 | [40] | TERMINAL | ||
| 238-2363 | [6] | TERMINAL (FEMALE) | ||
| 238-2366 | [11] | TERMINAL (MALE) | ||
| 239-7356 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 342-2972 | [1] | CAP-CONNECTOR (2-PIN) | ||
| 349-5084 | [3] | TERMINAL-BLADE | ||
| 349-5085 | [3] | RECEPTACLE AS-CONNECTOR | ||
| 30. | 095-0723 M | [3] | SCREW-SPECIAL (M3X0.5X10-MM) | |
| 31. | 096-5962 | [3] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 32. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 33. | 132-5789 | [6] | CLIP (LADDER) | |
| 34. | 4P-7581 | [1] | CLIP (LADDER) | |
| 35. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 36. | 6V-5210 M | [8] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 37. | 6V-9672 M | [2] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 38. | 8T-0328 | [3] | WASHER-HARD (5.5X10X1-MM THK) | |
| 39. | 8T-4127 M | [2] | SCREW-MACHINE (M5X0.8X20-MM) | |
| 40. | 8T-6693 M | [1] | SCREW-MACHINE (M5X0.8X16-MM) | |
| 41. | 9X-2042 M | [8] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 42. | 9X-2044 M | [5] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 43. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| 44. | 101-2846 E | GUARD (9.5-CM) | ||
| 44A. | 101-2846 E | GUARD (9-CM EACH) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | IF EQUIPPED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP62400141
388-6841: WIRING GP-CHASSIS
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [35] | STRAP-CABLE | |
| 2. | 4I-7889 | [6] | SPACER (11X25X45-MM THK) | |
| 3. | 7I-2673 | [3] | STRAP-CABLE | |
| 4. | 7K-1181 | [20] | STRAP-CABLE | |
| 6. | 087-4587 | [1] | GROMMET | |
| 7. | 091-9035 | [1] | SPACER (11X25X20-MM THK) | |
| 8. | 111-4836 | [9] | CLIP | |
| 9. | 111-4837 | [13] | CLIP | |
| 10. | 111-4838 | [13] | CLIP | |
| 11. | 111-4839 | [13] | STRAP | |
| 12. | 116-0118 | [8] | CLIP | |
| 13. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 14. | 251-0467 | [1] | BRACKET AS | |
| 15. | 259-5317 | [1] | BRACKET AS | |
| 16. | 291-7593 | [1] | BRACKET AS | |
| 17. | 306-8401 | [1] | GROMMET (85-MM ID) | |
| 18. | 318-1181 Y | [1] | SENSOR GP-SPEED (MAGNETIC)(ENGINE) | |
| 19. | 366-9331 | [1] | BRACKET AS-PUMP | |
| 20. | 377-8051 | [1] | BRACKET AS (ENGINE) | |
| 21. | 399-0797 | [1] | BRACKET AS (ENGINE) | |
| 22. | 415-3687 | [1] | STRAP AS-GROUND | |
| 23. | 418-6323 | [1] | HARNESS AS-CHASSIS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 2L-8075 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 24. | 431-9251 | [1] | HARNESS AS-CHASSIS | |
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [13] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [37] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [14] | STRAP-CABLE | ||
| 6T-5598 | [1] | TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW) | ||
| 9X-0196 | [2] | TERMINAL AS (16-GA) | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [78] | PLUG-SEAL | ||
| 8T-8799 | [1] | BOOT (RED) | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 103-2529 E | HOSE (80-CM) | |||
| 9W-0852 | [13] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 305-5362 | [2] | TERMINAL AS (18-GA) | ||
| 115-1184 | [2] | TERMINAL-RING (2-GA, 1/4-IN SCREW) | ||
| 116-0126 | [1] | HOUSING-PLUG | ||
| 116-0128 | [2] | SEAL | ||
| 116-0255 | [2] | TERMINAL-BLADE (10-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM) | |||
| 121-1038 | [1] | HOUSING-RECEPTACLE | ||
| 121-1039 | [1] | TERMINAL (MALE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(95-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(12-CM) | |||
| 9X-3402 | [106] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [106] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1768 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8050 | [2] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 | [2] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 2L-8069 | [9] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 176-9299 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 134-3297 | [1] | SEAL | ||
| 9X-3401 | [42] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [42] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 153-2620 | [1] | PLUG AS-CONNECTOR (54-PIN, BLACK) | ||
| 163-6759 | [1] | SEAL | ||
| 153-2630 | [1] | PLUG AS-CONNECTOR (54-PIN, BROWN) | ||
| 163-6759 | [1] | SEAL | ||
| 155-2270 | [15] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 163-6637 | [1] | RECEPTACLE AS-CONNECTOR (54-PIN, BLACK) | ||
| 163-6773 | [2] | PLUG-SEAL | ||
| 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 197-4385 | [1] | DIODE | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [9] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [2] | PLUG AS-CONNECTOR (6-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 231-2295 | [2] | PLUG AS-CONNECTOR (8-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [4] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 281-8803 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 281-8804 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 342-2972 | [2] | CAP-CONNECTOR (2-PIN) | ||
| 342-2974 | [2] | CAP-CONNECTOR (6-PIN) | ||
| 342-2975 | [1] | CAP-CONNECTOR (8-PIN) | ||
| 342-2976 | [1] | CAP-CONNECTOR (12-PIN) | ||
| 349-5084 | [1] | TERMINAL-BLADE | ||
| 349-5085 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 25. | 099-6418 M | [1] | NUT (M6X1-THD) | |
| 26. | 132-5789 | [6] | CLIP (LADDER) | |
| 27. | 177-2215 | [1] | STRAP-DUAL CLAMP | |
| 28. | 347-4734 | [1] | CLIP | |
| 29. | 4P-7428 | [1] | CLIP (LADDER) | |
| 30. | 4P-7581 | [4] | CLIP (LADDER) | |
| 31. | 5C-7883 M | [4] | BOLT-SOCKET HEAD (M6X1X16-MM) | |
| 32. | 5I-3878 | [1] | GROMMET (50-MM ID) | |
| 33. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 34. | 6G-2263 | [1] | SPACER (10.5X19X28.5-MM THK) | |
| 35. | 7X-2621 M | [1] | BOLT (M10X1.5X12-MM) | |
| 36. | 7Y-5456 | [2] | GROMMET | |
| 37. | 7Y-8165 | [1] | GROMMET | |
| 38. | 7Y-8167 | [1] | GROMMET (50-MM ID) | |
| 39. | 8M-2770 | [1] | CLIP (LOOP) | |
| 40. | 8T-4121 | [60] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4136 M | [14] | BOLT (M10X1.5X25-MM) | |
| 42. | 8T-4137 M | [28] | BOLT (M10X1.5X20-MM) | |
| 43. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 44. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 45. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 46. | 8T-4191 M | [6] | BOLT (M10X1.5X16-MM) | |
| 47. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 48. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 49. | 8T-4199 M | [1] | BOLT (M8X1.25X12-MM) | |
| 50. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 51. | 8T-5005 M | [2] | BOLT (M10X1.5X70-MM) | |
| 52. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 53. | 8T-6869 M | [3] | BOLT (M8X1.25X60-MM) | |
| 54. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP62400142
369-0239: WIRING GP-COMBINED FLOW
369-0239 WIRING GP-COMBINED FLOW
S/N DFM1-UP
PART OF 349-2209 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N DFM1-UP
PART OF 349-2209 CONTROL AR-AUXILIARY
AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [22] | STRAP-CABLE | |
| 2. | 7K-1181 | [13] | STRAP-CABLE | |
| 3. | 111-4836 | [2] | CLIP | |
| 4. | 116-0118 | [1] | CLIP | |
| 5. | 204-1611 | [4] | STRAP (DUAL) | |
| 6. | 419-6414 C | [1] | HARNESS AS-CHASSIS | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8079 | [3] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 4P-7581 | [1] | CLIP (LADDER) | |
| 9. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 11. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 12. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP62400143
267-8007: WIRING GP-COMMUNICATION
267-8007 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N DFM1-UP
PART OF 298-4115 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT
S/N DFM1-UP
PART OF 298-4115 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 4I-7889 | [1] | SPACER (11X25X45-MM THK) | |
| 3. | 7K-1181 | [3] | STRAP-CABLE | |
| 4. | 9X-3495 | [1] | CLIP AS | |
| 6. | 116-0118 | [3] | CLIP | |
| 7. | 259-4887 | [1] | HARNESS AS-WIRING (PRODUCT LINK) | |
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [1] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8T-8737 | [62] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [19] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [19] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 9X-3401 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [9] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 230-5010 | [2] | PLUG AS-CONNECTOR (6-PIN) | ||
| 243-4508 | [2] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 8. | 259-4940 | [1] | HARNESS AS-WIRING (SERVICE CONNECTOR) | |
| 8T-8731 | [1] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-3732 | [1] | COUPLING AS-PERMANENT | ||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 9. | 275-6979 | [1] | HARNESS AS-CONTROL (PRODUCT LINK 121SR) | |
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [14] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 10. | 111-4837 | [1] | CLIP | |
| 11. | 132-5789 | [2] | CLIP (LADDER) | |
| 12. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4136 CM | [2] | BOLT (M10X1.5X25-MM) | |
| 14. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 17. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP62400144
267-8007: WIRING GP-COMMUNICATION
267-8007 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N DFM1-UP
PART OF 298-4115 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT
S/N DFM1-UP
PART OF 298-4115 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-7889 | [1] | SPACER (11X25X45-MM THK) | |
| 2. | 111-4837 | [1] | CLIP | |
| 3. | 116-0118 C | [1] | CLIP | |
| 4. | 440-4822 CY | [1] | HARNESS AS-CONTROL | |
| 5. | 132-5789 | [2] | CLIP (LADDER) | |
| 6. | 7K-1181 | [3] | STRAP-CABLE | |
| 7. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4136 CM | [1] | BOLT (M10X1.5X25-MM) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 11. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP62400145
231-1836: WIRING GP-CONSOLE
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [1] | STRAP-CABLE | |
| 3. | 163-6795 | [2] | STRAP-CABLE | |
| 4. | 251-0580 | [1] | HARNESS AS-CONSOLE | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [9] | STRAP-CABLE | ||
| 5P-5995 D | TUBE (0.3-M) | |||
| 7Y-3963 | [2] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [2] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [11] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 247-2693 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP62400146
251-0433: WIRING GP-CONSOLE
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS#SEBP62400147
251-0435: WIRING GP-CONSOLE
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [4] | STRAP-CABLE | |
| 2. | 7K-1181 | [2] | STRAP-CABLE | |
| 3. | 163-6795 C | [1] | STRAP-CABLE | |
| 4. | 373-8980 C | [1] | HARNESS AS-CONSOLE | |
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [11] | STRAP-CABLE | ||
| 7Y-3967 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [27] | PLUG-SEAL | ||
| 102-7964 | [1] | PLUG-CONNECTOR (16-PIN) | ||
| 102-7965 | [14] | TERMINAL (FEMALE) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-4841 | [1] | WEDGE-PLUG LOCK (21-PIN) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 9X-3402 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [24] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-5008 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 264-7031 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 231-2295 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 238-2363 | [7] | TERMINAL (FEMALE) | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 247-2693 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 5. | 3E-9375 CE | CONDUIT (10-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP62400148
350-8250: WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER -12-VOLT, 10-AMPERE
S/N DFM1-UP
PART OF 424-4566 OPTION AR-CAB
AN ATTACHMENT
S/N DFM1-UP
PART OF 424-4566 OPTION AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 479-9395 | [1] | BRACKET | |
| 2. | 475-2681 | [1] | CONVERTER-POWER (24-VOLT TO 12-VOLT) | |
| 3. | 324-5771 | [2] | SOCKET-AUXILIARY POWER (12-VOLT) | |
| 4. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 6. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 7. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP62400149
259-5052: WIRING GP-FINE SWING
For full view, you need register
Parts for your 320D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-4836 | [1] | CLIP | |
| 2. | 111-4837 | [3] | CLIP | |
| 3. | 238-2171 | [1] | BRACKET AS | |
| 4. | 259-5129 | [1] | HARNESS AS-SOLENOID | |
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 103-2529 E | HOSE (100-CM) | |||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 5. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 7. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
