AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

394-4812 FRAME AS-UPPER S/N DFM1-UP PART OF 394-4810 FRAME GP-UPPER AN ATTACHMENT 320D2 EXCAVATOR


FRAME AND BODY
FRAME GP
GEAR & BEARING GP
GUARD GP
HANDRAIL GP
ENCLOSURE GP
HOOD GP
GUARD GP

EXCAVATOR 320D2 EXCAVATOR DFM
 320D2 Excavator DFM00001-UP (MACHINE) POWERED BY C7.1 Engine SEBP6240 320D2 DFM   (2013)

FRAME AND BODY

FRAME GP
FRAME AS-UPPER
394-4812 FRAME AS-UPPER
FRAME GP-UPPER
394-4810 FRAME GP-UPPER
 

#SEBP62400180
 

394-4812: FRAME AS-UPPER

394-4812 FRAME AS-UPPER
S/N DFM1-UP
PART OF 394-4810 FRAME GP-UPPER
AN ATTACHMENT
i05363924 SEBP6240
3944812 FRAME AS-UPPER Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-0633 [1] BOSS  
2. 163-3729 [1] STEP AS  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  178-0852 F [1] PLATE-SKIRT (1100-MM)  
  184-5724 F [1] PLATE-SKIRT (2000-MM)  
  F   NOT SHOWN
 

#SEBP62400181
 

394-4810: FRAME GP-UPPER

394-4810 FRAME GP-UPPER
S/N DFM1-UP
PART OF 424-4558, 424-4559, 456-1063 DISTRIBUTION AR
AN ATTACHMENT
i05363922 SEBP6240
3944810 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0083 B [4] SHIM (1-MM THK)  
2. 093-0115 B [2] SHIM (2-MM THK)  
3. 093-0349 [3] WASHER (22X60X6-MM THK)  
4. 093-0363 [2] SPACER (83X120X12-MM THK)  
5. 133-2425 B [2] SHIM (0.5-MM THK)  
6. 4I-4812 [2] PIN AS  
7. 212-2838 [2] SHIM (2-MM THK)  
8. 245-7900 J [1] CAP  
9. 245-7901 J [1] CAP  
10. 308-8775 B [1] SHIM (0.5-MM THK)  
11. 308-8776 B [2] SHIM (1-MM THK)  
12. 308-8777 B [1] SHIM (2-MM THK)  
13. 315-0800 [1] PIN AS  
14. 394-4812 Y [1] FRAME AS-UPPER  
15. 451-2176 [3] WASHER-HARD (22X35X3.5-MM THK)  
16. 453-2844 M [3] BOLT (M20X2.5X30-MM)  
  B   USE AS REQUIRED
  J   USE ON MACHINE WITHOUT LOWER WIPER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62400182
 

227-6081: GEAR & BEARING GP-SWING

227-6081 GEAR & BEARING GP-SWING
S/N DFM1-UP
PART OF 227-6147 GEAR & BEARING GP-SWING
i02832478 SEBP6240
2276081 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 227-6071 [1] SEAL-DUST  
3. 148-4685 E SEAL (368-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP62400183
 

227-6147: GEAR & BEARING GP-SWING

227-6147 GEAR & BEARING GP-SWING
S/N DFM1-UP
PART OF 247-7454 FRAME AR-UNDERCARRIAGE
i02832477 SEBP6240
2276147 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9243 [2] ELBOW-FLARED  
2. 7Y-1647 [1] GASKET  
3. 7Y-1650 [1] CLAMP-HOSE  
4. 468-5306 [40] SPACER (20.5X38X34-MM THK)  
5. 148-4689 [1] TUBE AS  
6. 171-9464 [37] SPACER (20.6X38X6-MM THK)  
7. 227-6081 Y [1] GEAR & BEARING GP-SWING  
8. 227-6105 [1] BOOT  
9. 227-6106 [1] RETAINER  
10. 096-4902 [1] DOWEL  
11. 148-4703 [1] COVER  
12. 148-4704 [1] GASKET  
13. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
14. 4N-9170 [2] CLIP (LOOP)  
15. 7Y-1648 [1] STRIP  
16. 145-9278 M [40] BOLT (M20X2.5X90-MM)  
17. 5Q-3560 M [37] BOLT (M20X2.5X110-MM)  
18. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
20. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
21. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62400184
 

374-4017: GUARD GP-BOTTOM

374-4017 GUARD GP-BOTTOM
S/N DFM1-UP
PART OF 394-7461 CHASSIS AR
i05361805 SEBP6240
3744017 GUARD GP-BOTTOM Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8576 [36] BOLT AS-LOCKING  
2. 165-2823 [1] SHEET  
3. 248-8992 [1] SHEET  
4. 421-3762 [1] SHEET  
5. 248-8994 [1] SHEET  
    -OR-
  342-0932 J [1] SHEET AS  
6. 248-8995 [1] SHEET  
7. 377-6715 [2] SHEET  
8. 461-0414 [1] SHEET AS  
9. 289-6603 [1] SHEET  
10. 342-0965 J [1] PLATE AS  
11. 8C-8992 JM [2] BOLT-LOCKING (M12X1.75X30-MM)  
12. 5P-1076 J [2] WASHER-HARD (13.5X30X4-MM THK)  
  J   OPTIONAL DESIGN FOR COLD WEATHER APPLICATIONS
  M   METRIC PART
 

#SEBP62400185
 

134-8850: GUARD GP-SWIVEL

134-8850 GUARD GP-SWIVEL
S/N DFM1-UP
PART OF 456-1063 DISTRIBUTION AR
AN ATTACHMENT
i06536476 SEBP6240
1348850 GUARD GP-SWIVEL Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-8851 [1] PLATE AS  
2. 130-4276 [4] PLATE  
3. 447-1707 M [8] BOLT (M16X2X60-MM)  
4. 453-2865 [8] WASHER-HARD (17.5X38X6-MM THK)  
  M   METRIC PART
 

#SEBP62400186
 

142-3835: HANDRAIL GP

142-3835 HANDRAIL GP
S/N DFM1-UP
PART OF 394-7461 CHASSIS AR
i02834146 SEBP6240
1423835 HANDRAIL GP Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
3. 177-5880 [2] SLEEVE  
4. 177-5879 [1] CLAMP  
5. 177-5877 [1] HANDHOLD AS  
6. 135-8578 [3] BOLT AS  
  M   METRIC PART
 

#SEBP62400187
 

395-0572: HOOD & GUARD GP

395-0572 HOOD & GUARD GP
S/N DFM1-UP
PART OF 394-7461 CHASSIS AR
i05361931 SEBP6240
3950572 HOOD & GUARD GP Parts scheme 3950572 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0118 [2] HOOK AS  
2. 4I-0232 [2] STRIKER  
3. 4I-8019 [3] SUPPORT  
4. 6I-6033 [3] STOP  
5. 7Y-2853 [8] SPACER (13X38X5-MM THK)  
6. 087-3908 B [4] SHIM (1-MM THK)  
7. 087-3909 B [4] SHIM (2-MM THK)  
8. 122-3979 [1] BAND  
9. 122-3980 [1] ROD  
10. 122-4120 [3] ROD  
11. 170-3016 [15] SPACER (19X32X2-MM THK)  
12. 190-6880 [3] SUPPORT AS  
13. 244-8228 [1] SUPPORT AS  
14. 244-8242 [1] SUPPORT AS  
15. 244-8255 [1] SUPPORT AS  
16. 262-2363 [1] SHEET AS-SOUND SUPPRESSION  
  262-2365 [1] LINER  
17. 289-6698 [1] SUPPORT AS  
18. 289-6805 [1] SUPPORT AS-ENCLOSURE  
19. 377-6667 Y [1] SHEET AS-SOUND SUPPRESSION  
20. 377-6698 Y [1] SUPPORT AS-ENCLOSURE  
21. 377-6708 Y [1] SHEET AS-SOUND SUPPRESSION  
22. 377-6786 [1] COVER AS  
23. 379-7425 Y [1] SUPPORT AS-SOUND SUPPRESSION  
24. 379-7436 [1] COVER AS  
25. 379-7518 [1] SUPPORT AS  
  7T-1099 [8] LINK  
  8T-3597 M [7] NUT-WELD (M12X1.75-THD)  
  087-5841 [1] PLATE  
  121-1029 [1] CLIP  
26. 425-6092 Y [1] DOOR GP-ACCESS (PUMP COMPARTMENT)  
27. 391-4751 [1] COVER AS  
28. 391-4752 [1] COVER AS  
29. 391-9646 Y [1] SHEET AS-SOUND SUPPRESSION  
30. 391-9651 [1] SHEET AS-SOUND SUPPRESSION  
31. 391-9655 [1] SUPPORT AS  
32. 392-1262 [1] SPRING AS-GAS (ENGINE HOOD)(ENGINE HOOD)  
33. 392-2667 [1] SUPPORT AS  
34. 396-3542 [1] SUPPORT AS  
35. 396-3545 [1] COVER AS  
  190-7081 [2] SHEET  
  396-3547 [1] COVER AS  
36. 431-0101 Y [1] SHEET AS-SOUND SUPPRESSION  
37. 431-0102 [1] SUPPORT AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
  7T-1099 [3] LINK  
  8T-3490 M [7] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [8] NUT-WELD (M12X1.75-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
  9R-2060 M [1] BOSS (M10X1.5X21-MM)  
38. 396-3569 [1] SHEET AS  
39. 428-5842 Y [1] SHEET AS-SOUND SUPPRESSION  
40. 396-8523 Y [1] SHEET AS-SOUND SUPPRESSION  
41. 396-9388 Y [1] COVER AS-SOUND SUPPRESSION (FUEL, HYDRAULIC TANKS)  
42. 397-9009 Y [1] SUPPORT AS-SOUND SUPPRESSION  
43. 431-0103 [1] SHEET AS  
  7T-1099 [3] LINK  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
44. 419-3368 Y [1] SHEET AS-SOUND SUPPRESSION  
45. 422-5388 Y [1] DOOR AS-ACCESS (AIR CLEANER, BATTERY)  
46. 423-5183 Y [1] HOOD GP-ENGINE  
47. 423-5185 Y [1] DOOR GP-ACCESS (RADIATOR)  
48. 105-3487 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
49. 114-6285 [2] BAR  
50. 135-8573 [67] BOLT AS  
51. 135-8575 [34] BOLT AS  
52. 135-8577 [4] BOLT AS  
53. 135-8578 [6] BOLT AS  
54. 3B-4618 [3] PIN-COTTER  
55. 5C-7261 M [1] NUT (M8X1.25-THD)  
56. 5C-9553 M [8] BOLT (M6X1X16-MM)  
57. 5P-0372 [1] LOCK PIN  
58. 5P-4115 [10] WASHER-HARD (7.2X19X2-MM THK)  
59. 7F-3708 [1] PIN  
60. 7Y-2854 [8] SPACER (24X38X3-MM THK)  
61. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
62. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
63. 8T-4138 M [10] BOLT (M6X1X20-MM)  
64. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
65. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
66. 9X-8256 [14] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62400188
 

423-5183: HOOD GP-ENGINE

423-5183 HOOD GP-ENGINE
S/N DFM1-UP
PART OF 395-0572 HOOD & GUARD GP
i05362238 SEBP6240
4235183 HOOD GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-4129 [2] CUSHION  
2. 375-8749 J [1] LATCH AS  
3. 375-8750 [1] LATCH AS  
4. 396-7706 [1] LINER  
5. [1] HOOD AS-ENGINE  
5A. 114-6289 [2] HINGE  
5B. 268-0720 [1] HANDLE  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
  8T-8874 M [4] NUT-WELD (M5X0.8-THD)  
6. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
7. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
8. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
9. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
10. 101-9848 D SEAL (22-M)  
10A. 101-9848 D SEAL (10.1-M)  
10B. 101-9848 D SEAL (17.1-M)  
10C. 101-9848 D SEAL (9.7-M)  
  D   ORDER BY THE METER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP62400189
 

471-1985: KIT-GUARD

471-1985 KIT-GUARD -SWIVEL
S/N DFM1-UP
PROVIDES A STANDARD SWIVEL GUARD UPGRADE
FOR USE WITH REHS8139
CANNOT BE USED WITH @@@@@134-8850@@@@@
FIELD INSTALLATION
i06190616 SEBP6240
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8C-8992 M [5] BOLT-LOCKING (M12X1.75X30-MM)  
  134-8876 [1] PLATE AS  
  8T-3597 M [5] NUT-WELD (M12X1.75-THD)  
  134-8878 [1] PLATE AS  
  5P-1076 [5] WASHER-HARD (13.5X30X4-MM THK)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 320D2 :

DOOR GP-ACCESS
425-6092 DOOR GP-ACCESS
DOOR GP-ACCESS
423-5185 DOOR GP-ACCESS
DOOR AS-ACCESS
422-5388 DOOR AS-ACCESS
COVER AS-SOUND SUPPRESSION
399-2560 COVER AS-SOUND SUPPRESSION
COVER AS-SOUND SUPPRESSION
399-0819 COVER AS-SOUND SUPPRESSION
COVER AS-SOUND SUPPRESSION
396-9388 COVER AS-SOUND SUPPRESSION
COUNTERWEIGHT GP
379-7392 COUNTERWEIGHT GP
COUNTERWEIGHT & MOUNTING GP
379-7391 COUNTERWEIGHT & MOUNTING GP
FRAME GP-UPPER
394-4810 FRAME GP-UPPER
GEAR & BEARING GP-SWING
227-6081 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
227-6147 GEAR & BEARING GP-SWING
GUARD GP-BOTTOM
374-4017 GUARD GP-BOTTOM
GUARD GP-SWIVEL
134-8850 GUARD GP-SWIVEL
HANDRAIL GP
142-3835 HANDRAIL GP
HOOD & GUARD GP
395-0572 HOOD & GUARD GP
HOOD GP-ENGINE
423-5183 HOOD GP-ENGINE

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.