AVSPARE.COM
parts catalog

348-3285 CRANKSHAFT GP S/N D7A1-UP PART OF 425-0779 CYLINDER BLOCK GP-SHORT, 417-3389 ENGINE AR-PRIMARY 320D2 L




BASIC ENGINE

CRANKSHAFT GP
 

#SEBP62410070
 

348-3285: CRANKSHAFT GP

348-3285 CRANKSHAFT GP
S/N D7A1-UP
PART OF 425-0779 CYLINDER BLOCK GP-SHORT, 417-3389 ENGINE AR-PRIMARY
i05166785 SEBP6241
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. L [7] BEARING-CRANKSHAFT (STANDARD-UPPER)  
2. L [7] BEARING-CRANKSHAFT (STANDARD-LOWER)  
3. 363-0559 J [2] WASHER-THRUST  
4. 376-4074 [1] CRANKSHAFT  
5. 067-6135 [1] KEY-WOODRUFF  
6. 276-7391 [1] GEAR (34-TEETH)  
   
    AVAILABLE REPAIR KIT(S):
  448-4217 L [1] KIT-BEARING (STANDARD)(CRANKSHAFT)  
    (INCLUDES BEARINGS)
  454-3745 AB [1] KIT-BEARING (0.254-MM US)  
    (INCLUDES BEARINGS)
  454-3931 AB [1] KIT-BEARING (0.508-MM US)  
    (INCLUDES BEARINGS)
  454-3935 AB [1] KIT-BEARING (0.762-MM US)  
    (INCLUDES BEARINGS)
  364-5145 J [1] KIT-WASHER (STANDARD)(CRANKSHAFT)  
    (INCLUDES WASHERS)
  448-4227 AB [1] KIT-WASHER (0.20-MM US)  
    (INCLUDES WASHERS)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
 

#SEBP62410071
 

331-1682: CYLINDER BLOCK AS

331-1682 CYLINDER BLOCK AS
S/N D7A1-UP
PART OF 348-3283 CYLINDER BLOCK GP
i05155989 SEBP6241
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 067-6043 [7] PLUG-SIDE  
2. 185-0884 [2] DOWEL  
3. 225-8858 [2] PLUG  
4. 232-7597 [2] PLUG  
5. 232-7599 [2] PLUG  
6. 276-5602 [2] PLUG-CORE  
7. 232-7596 [1] PLUG  
8. 067-6823 [1] PLUG  
9. 276-5600 [14] BOLT-SPECIAL (BEARING CAP)  
10. 370-6545 [1] BUSHING-CAMSHAFT  
 

#SEBP62410072
 

348-3283: CYLINDER BLOCK GP

348-3283 CYLINDER BLOCK GP
S/N D7A1-UP
PART OF 425-0779 CYLINDER BLOCK GP-SHORT, 417-3389 ENGINE AR-PRIMARY
i05155990 SEBP6241
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 209-9219 M [10] BOLT (M8X1.25X16-MM)  
2. 232-1322 [1] PLUG  
3. 276-5603 [1] SEAL-O-RING  
4. 331-1682 Y [1] CYLINDER BLOCK AS  
5. 232-7449 [1] HOUSING AS  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62410073
 

425-0779: CYLINDER BLOCK GP-SHORT

425-0779 CYLINDER BLOCK GP-SHORT
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05523210 SEBP6241
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  348-3285 Y [1] CRANKSHAFT GP  
  348-3283 Y [1] CYLINDER BLOCK GP  
  348-3503 Y [1] JET GP-PISTON COOLING  
  348-3300 Y [1] PISTON & ROD GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP62410074
 

391-3193: CYLINDER HEAD GP

391-3193 CYLINDER HEAD GP
S/N D7A1-UP
PART OF 425-3316 CYLINDER HEAD GP, 417-3389 ENGINE AR-PRIMARY
i05166784 SEBP6241
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 335-7055 [14] BOLT  
2. 359-6616 [1] GASKET (CYLINDER HEAD)  
3. 450-9263 [1] CYLINDER HEAD GP  
  067-6006 [6] PLUG  
  335-6264 [12] GUIDE-VALVE  
  542-1363 [8] PLUG-CUP  
  335-6266 [6] INSERT-VALVE SEAT  
  381-6236 [6] INSERT-VALVE SEAT  
 

#SEBP62410075
 

425-3316: CYLINDER HEAD GP

425-3316 CYLINDER HEAD GP
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05523191 SEBP6241
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 391-3193 Y [1] CYLINDER HEAD GP  
2. 438-3180 Y [1] ROCKER ARM GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP62410076
 

394-7014: DRAIN GP-ENGINE OIL

394-7014 DRAIN GP-ENGINE OIL
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05156019 SEBP6241
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-0360 [1] SEAL-O-RING  
2. 6V-7238 [1] VALVE-SHUTOFF  
 

#SEBP62410077
 

396-6979: DRIVE GP-FAN

396-6979 DRIVE GP-FAN
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05156015 SEBP6241
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0593 M [10] BOLT (M10X1.5X30-MM)  
2. 321-9994 [1] DRIVE AS-FAN  
2A. 176-0773 [1] CLIP  
3. 348-5434 [1] IDLER AS  
4. 379-2023 [1] BRACKET  
5. 388-1869 [1] BRACKET AS  
5A. 339-8780 [1] DOWEL  
5B. [1] BRACKET  
6. 6I-0654 M [3] BOLT (M10X1.5X25-MM)  
7. 273-9292 M [2] BOLT (M16X2X65-MM)  
8. 277-6078 [1] BRACKET  
  M   METRIC PART
 

#SEBP62410078
 

371-2539: FLYWHEEL GP

371-2539 FLYWHEEL GP
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05147993 SEBP6241
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-4911 [12] WASHER  
2. 378-4739 [1] FLYWHEEL AS  
  277-0588 [1] GEAR-STARTING MOTOR RING (134-TEETH)  
3. 0S-1603 [12] BOLT (1/2-20X1.5-IN)  
 

#SEBP62410079
 

396-6954: HOUSING GP-FLYWHEEL

396-6954 HOUSING GP-FLYWHEEL
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05156017 SEBP6241
  For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0917 M [2] BOLT (M6X1X25-MM)  
2. 354-8322 [1] PLUG  
3. 283-4662 M [2] BOLT-FLANGE HEAD  
4. 287-8597 [2] DOWEL  
5. 288-6974 M [4] BOLT (M10X1.5X50-MM)  
6. 335-2092 [1] COVER-FLYWHEEL  
7. 393-4006 [1] GASKET  
8. 394-5874 [1] HOUSING-FLYWHEEL  
9. 288-6975 M [2] BOLT (M16X2X40-MM)  
  M   METRIC PART
 

Information:

Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Bearing Clearance - Check
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft - Install
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft - Remove
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove and Install
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C7.1 (Mech) Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 320D2 L :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.