AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERED BY C9.3 Engine BASIC ENGINE Caterpillar SIS



EXCAVATOR 336E LH EXCAVATOR GNY
 336E LH & 336E LNH (Hybrid) Excavators GNY00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP6247 336E LH GNY   (2014)

Parts group 336E LH:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
294-3593 CAMSHAFT GP
294-3593 CAMSHAFT GP
S/N MME8000-UP; MYE1-UP
PART OF 347-0103 ENGINE AR-CORE
ALSO AN ATTACHMENT
COMPRESSOR GP-REFRIGERANT
MOUNTING GP-ALTERNATOR & COMPR
344-0368 MOUNTING GP-ALTERNATOR & COMPR
344-0368 MOUNTING GP-ALTERNATOR & COMPR
S/N MME8000-UP; MYE1-UP
PROVIDES ALTERNATOR AND AIR CONDITIONING COMPRESSOR MOUNTING GP LOCATED ON UPPER RIGHT HAND SIDE OF THE ENGINE, INCLUDES BELT TENSIONER AND IDLER PULLEYS.
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATORS AND COMPRESSORS
CANNOT BE USED WITH HINGE MOUNTED ALTERNATORS AND COMPRESSORS
ALSO AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
294-2987 CRANKSHAFT GP
294-2987 CRANKSHAFT GP
S/N MME8000-UP; MYE1-UP
PART OF 347-0103 ENGINE AR-CORE
ALSO AN ATTACHMENT
SEAL GP-CRANKSHAFT
295-2351 SEAL GP-CRANKSHAFT
295-2351 SEAL GP-CRANKSHAFT
S/N MYE1-UP
PART OF 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
SEAL GP-CRANKSHAFT
296-1486 SEAL GP-CRANKSHAFT
296-1486 SEAL GP-CRANKSHAFT
S/N MME8000-UP
PART OF 364-0687 ENGINE AR-COMPLETE
CYLINDER BLOCK GP
COVER & MTG GP-CYLINDER BLOCK
348-9213 COVER & MTG GP-CYLINDER BLOCK
348-9213 COVER & MTG GP-CYLINDER BLOCK
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
FOR USE WITH ENGINES WITH VALVE COVER MOUNTED BREATHER
CANNOT BE USED WITH ENGINES WITH SIDE MOUNTED BREATHER
ALSO AN ATTACHMENT
CYLINDER BLOCK AS
523-9619 CYLINDER BLOCK AS
523-9619 CYLINDER BLOCK AS
S/N MME8000-UP; MYE1-UP
PART OF 277-7261 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
CYLINDER BLOCK AS
524-2485 CYLINDER BLOCK AS
524-2485 CYLINDER BLOCK AS
S/N MME8000-UP; MYE1-UP
PART OF 523-9619 CYLINDER BLOCK AS
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
277-7261 CYLINDER BLOCK GP
277-7261 CYLINDER BLOCK GP
S/N MME8000-UP; MYE1-UP
PART OF 347-0103 ENGINE AR-CORE
ALSO AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
275-4260 PLUG GP-CYLINDER BLOCK
275-4260 PLUG GP-CYLINDER BLOCK
S/N MME8000-UP; MYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER
ALSO AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
275-8699 PLUG GP-CYLINDER BLOCK
275-8699 PLUG GP-CYLINDER BLOCK
S/N MME8000-UP; MYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE RH SIDE OF BLOCK
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A BYPASS AUXILIARY COOLER
ALSO AN ATTACHMENT
PLUG GP-ENGINE
292-9786 PLUG GP-ENGINE
292-9786 PLUG GP-ENGINE -COMPRESSION BRAKE
S/N MME8000-UP; MYE1-UP
PROVIDES A PLUG GP FOR COMPRESSION BRAKE OIL SUPPLY WHEN COMPRESSION BRAKE IS NOT USED
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CYLINDER HEAD GP
CYLINDER HEAD AS
328-7475 CYLINDER HEAD AS
328-7475 CYLINDER HEAD AS
S/N MME8000-UP; MYE1-UP
PART OF 346-6388 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
346-0485 CYLINDER HEAD GP
346-0485 CYLINDER HEAD GP
S/N MME8000-UP; MYE1-UP
PART OF 347-0103 ENGINE AR-CORE
ALSO AN ATTACHMENT
CYLINDER HEAD GP
346-6388 CYLINDER HEAD GP
346-6388 CYLINDER HEAD GP
S/N MME8000-UP; MYE1-UP
PART OF 346-0485 CYLINDER HEAD GP
ALSO AN ATTACHMENT
FASTENER GP-CYLINDER HEAD
290-6884 FASTENER GP-CYLINDER HEAD
290-6884 FASTENER GP-CYLINDER HEAD
S/N MME8000-UP; MYE1-UP
PART OF 346-0485 CYLINDER HEAD GP
ALSO AN ATTACHMENT
455-1699 KIT-CYLINDER HEAD GASKET
455-1699 KIT-CYLINDER HEAD GASKET
S/N RZA1-UP; SSL1-UP
KIT CONTAINS GASKETS, SELAS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD.. KIT INCLUDES THE TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS.. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE.
FIELD INSTALLATION
PLUG GP-CYLINDER HEAD
346-4997 PLUG GP-CYLINDER HEAD
346-4997 PLUG GP-CYLINDER HEAD
S/N MYE1-UP
PART OF 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
CANNOT BE USED WITH AIR COMPRESSOR GROUPS
ALSO AN ATTACHMENT
PLUG GP-CYLINDER HEAD
350-0195 PLUG GP-CYLINDER HEAD
350-0195 PLUG GP-CYLINDER HEAD
S/N MME8000-UP
PART OF 364-0687 ENGINE AR-COMPLETE
FOR USE WITH WATER COOLED TURBO
CANNOT BE USED WITH AIR COMPRESSOR GP
PLUG GP-CYLINDER HEAD
495-5748 PLUG GP-CYLINDER HEAD
495-5748 PLUG GP-CYLINDER HEAD
S/N MYE1-UP
PART OF 442-9569 ENGINE AR-COMPLETE
PLUG GP-ENGINE
292-9786 PLUG GP-ENGINE
292-9786 PLUG GP-ENGINE -COMPRESSION BRAKE
S/N MME8000-UP; MYE1-UP
PROVIDES A PLUG GP FOR COMPRESSION BRAKE OIL SUPPLY WHEN COMPRESSION BRAKE IS NOT USED
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
DAMPER GP
DAMPER & PULLEY GP
347-0608 DAMPER & PULLEY GP
347-0608 DAMPER & PULLEY GP
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
345-6680 DRIVE GP-FAN
345-6680 DRIVE GP-FAN
S/N MME8000-UP; MYE1-UP
PROVIDES FAN DRIVE GROUP WITH TENSIONER AND IDLER PULLEY. FAN LOCATED IN LOWER RIGHT CORNER OF ENGINE.
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
FOR USE WITH UPPER RIGHT HAND SIDE ALTERNATOR BRACKET
CANNOT BE USED WITH UPPER LEFT HAND SIDE OR LOWER RIGHT SIDE ALTERNATOR BRACKET
ALSO AN ATTACHMENT
DRIVE GP-FAN
345-6682 DRIVE GP-FAN
345-6682 DRIVE GP-FAN
S/N MME8000-UP; MYE1-UP
PART OF 345-6680 DRIVE GP-FAN
ALSO AN ATTACHMENT
PULLEY GP-FAN
324-4333 PULLEY GP-FAN
324-4333 PULLEY GP-FAN
S/N RZA1-UP; SSL1-UP; GNY1-UP
PART OF 326-3902 FAN GP-SUCTION
AN ATTACHMENT
ENGINE GP
368-8324 INSTALLATION AR-ENG & CEM MOD
368-8324 INSTALLATION AR-ENG & CEM MOD
S/N RZA1-UP; SSL1-179
PART OF 384-2104, 389-1691 COMMON AR
FLYWHEEL GP
FLYWHEEL GP
319-8165 FLYWHEEL GP
319-8165 FLYWHEEL GP
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
FLYWHEEL GP
319-8165 FLYWHEEL GP
319-8165 FLYWHEEL GP
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
294-2931 GEAR GP-FRONT
294-2931 GEAR GP-FRONT
S/N MME8000-UP; MYE1-UP
PART OF 347-0103 ENGINE AR-CORE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
299-8022 HOUSING GP-FRONT
299-8022 HOUSING GP-FRONT
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
S/N MYE1-UP
PART OF 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
344-2902 HOUSING GP-FLYWHEEL
344-2902 HOUSING GP-FLYWHEEL
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
269-5311 COVER GP-FRONT HOUSING
269-5311 COVER GP-FRONT HOUSING
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
COVER GP-FRONT HOUSING
269-5325 COVER GP-FRONT HOUSING
269-5325 COVER GP-FRONT HOUSING
S/N MME8000-UP; MYE1-UP
PROVIDES COVER FOR ENGINES WITHOUT FACTORY INSTALLED AIR COMPRESSOR
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
COVER GP-FRONT HOUSING
338-2640 COVER GP-FRONT HOUSING
338-2640 COVER GP-FRONT HOUSING
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
GEAR GP-FRONT
294-2931 GEAR GP-FRONT
294-2931 GEAR GP-FRONT
S/N MME8000-UP; MYE1-UP
PART OF 347-0103 ENGINE AR-CORE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
299-8022 HOUSING GP-FRONT
299-8022 HOUSING GP-FRONT
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
455-1697 KIT-FRONT COVER GASKET
455-1697 KIT-FRONT COVER GASKET
S/N RZA1-UP; SSL1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@442-9569@@@@@
FIELD INSTALLATION
LIFTING GP-ENGINE
LIFTING GP-ENGINE
355-7364 LIFTING GP-ENGINE
355-7364 LIFTING GP-ENGINE
S/N MME8000-UP; MYE1-UP
PROVIDES FRONT AND REAR LIFTING EYES
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
355-7364 LIFTING GP-ENGINE
355-7364 LIFTING GP-ENGINE
S/N MYE1-UP
PROVIDES FRONT AND REAR LIFTING EYES
PART OF 431-1462, 442-9569 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR & COMPR
344-0368 MOUNTING GP-ALTERNATOR & COMPR
344-0368 MOUNTING GP-ALTERNATOR & COMPR
S/N MME8000-UP; MYE1-UP
PROVIDES ALTERNATOR AND AIR CONDITIONING COMPRESSOR MOUNTING GP LOCATED ON UPPER RIGHT HAND SIDE OF THE ENGINE, INCLUDES BELT TENSIONER AND IDLER PULLEYS.
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATORS AND COMPRESSORS
CANNOT BE USED WITH HINGE MOUNTED ALTERNATORS AND COMPRESSORS
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
310-9640 MOUNTING GP-ENGINE
310-9640 MOUNTING GP-ENGINE
S/N RZA1-UP; SSL1-UP; GNY1-UP
PART OF 368-8325, 452-5533 INSTALLATION AR-ENGINE
SUPPORT GP-ENGINE
346-9527 SUPPORT GP-ENGINE
346-9527 SUPPORT GP-ENGINE
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PAN GP-OIL
DRAIN GP-ENGINE OIL
310-9641 DRAIN GP-ENGINE OIL
310-9641 DRAIN GP-ENGINE OIL
S/N RZA1-UP; SSL1-UP; GNY1-UP
PART OF 368-8325, 452-5533 INSTALLATION AR-ENGINE
PAN GP-OIL
348-8371 PAN GP-OIL
348-8371 PAN GP-OIL
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PARTS GP-MISCELLANEOUS
COVER GP-ENGINE
325-8452 COVER GP-ENGINE
325-8452 COVER GP-ENGINE
S/N MME8000-UP; MYE1-UP
PROVIDES A THERMOSTAT HOUSING SIDE COVER WITHOUT A PORT FOR COOLANT SAMPLING
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
342-6646 PISTON & ROD GP
342-6646 PISTON & ROD GP
S/N MME8000-UP; MYE1-UP
17.0:1 COMPRESSION RATIO
PART OF 347-0103 ENGINE AR-CORE
ALSO AN ATTACHMENT
PULLEY GP
PULLEY GP-CRANKSHAFT
342-7219 PULLEY GP-CRANKSHAFT
342-7219 PULLEY GP-CRANKSHAFT
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINE MOUNTED CEM
ALSO AN ATTACHMENT
PULLEY GP-FAN
324-4333 PULLEY GP-FAN
324-4333 PULLEY GP-FAN
S/N RZA1-UP; SSL1-UP; GNY1-UP
PART OF 326-3902 FAN GP-SUCTION
AN ATTACHMENT
SUPPRESSION GP-SOUND
COVER GP-SOUND SUPPRESSION
350-1302 COVER GP-SOUND SUPPRESSION
350-1302 COVER GP-SOUND SUPPRESSION
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
SERPENTINE/V-BELTS
BELT GP-SERPENTINE
327-3980 BELT GP-SERPENTINE
327-3980 BELT GP-SERPENTINE
S/N MME8000-UP; MYE1-UP
PROVIDES ACCESSORY DRIVE BELT
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
FOR USE WITH RH SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR, LH SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR
CANNOT BE USED WITH NON-AIR CONDITIONED MACHINES
ALSO AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
349-1527 COVER GP-VALVE MECHANISM
349-1527 COVER GP-VALVE MECHANISM
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
ROCKER ARM GP
263-0033 ROCKER ARM GP
263-0033 ROCKER ARM GP -INTAKE
S/N MME8000-UP; MYE1-UP
PART OF 347-8760 VALVE MECHANISM GP
ALSO AN ATTACHMENT
VALVE MECHANISM GP
347-8760 VALVE MECHANISM GP
347-8760 VALVE MECHANISM GP
S/N MME8000-UP; MYE1-UP
PART OF 348-9896 VALVE MECHANISM GP
ALSO AN ATTACHMENT
VALVE MECHANISM GP
348-9896 VALVE MECHANISM GP
348-9896 VALVE MECHANISM GP
S/N MME8000-UP; MYE1-UP
PART OF 347-0103 ENGINE AR-CORE
ALSO AN ATTACHMENT
HOUSING GP-REAR
448-1642 KIT-REAR COVER GASKET
448-1642 KIT-REAR COVER GASKET
S/N RZA1-UP; SSL1-UP
KIT CONTAINS GASKETS, SEALS, BENDABLE LOCKS TO REINSTALL THE REAR COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKETS.
FIELD INSTALLATION
458-9490 KIT-REAR COVER GASKET
458-9490 KIT-REAR COVER GASKET
S/N RZA1-UP; SSL1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION
COVER GP-ENGINE
COVER GP-ENGINE
325-8452 COVER GP-ENGINE
325-8452 COVER GP-ENGINE
S/N MME8000-UP; MYE1-UP
PROVIDES A THERMOSTAT HOUSING SIDE COVER WITHOUT A PORT FOR COOLANT SAMPLING
PART OF 364-0687, 421-7233, 431-1462, 442-9569 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
455-1697 KIT-FRONT COVER GASKET
455-1697 KIT-FRONT COVER GASKET
S/N RZA1-UP; SSL1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@442-9569@@@@@
FIELD INSTALLATION
BRACKET GP-ENGINE
BRACKET GP-MOUNTING
344-4056 BRACKET GP-MOUNTING
344-4056 BRACKET GP-MOUNTING
S/N MME8000-UP; MYE1-UP
PART OF 364-0687, 421-7233, 431-1462 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

Information:

(For parts list, see above)

Disassembly and Assembly
Air Compressor - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
336E H Excavator
Specifications
Belt Tensioner
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Belt Tensioner - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Belt Tensioner - Remove and Install - Alternator, Refrigerant Compressor, Water Pump
336E Excavator Engine Supplement
Belt Tensioner - Remove and Install - Fan Drive
336E Excavator Engine Supplement
Systems Operation
Compression Brake
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Compression Brake - Remove
C9.3
Engines for Caterpillar Built Machines
Compression Brake - Disassemble - Valve Assembly
C9.3
Engines for Caterpillar Built Machines
Compression Brake - Assemble - Valve Assembly
C9.3
Engines for Caterpillar Built Machines
Compression Brake - Install
C9.3
Engines for Caterpillar Built Machines
Specifications
Camshaft
C9.3 Engines for Caterpillar Built Machines
Camshaft
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Camshaft - Remove
C9.3
Engines for Caterpillar Built Machines
Camshaft - Install
C9.3
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
336E H Excavator
Specifications
Refrigerant Compressor
336E H Excavator Machine System Specifications
Connecting Rod Bearing Journal
C9.3 Engines for Caterpillar Built Machines
Main Bearing Journal
C9.3 Engines for Caterpillar Built Machines
Crankshaft
C9.3 Engines for Caterpillar Built Machines
Crankshaft Seals
C9.3 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C9.3 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C9.3
Engines for Caterpillar Built Machines
Crankshaft - Remove
C9.3
Engines for Caterpillar Built Machines
Crankshaft - Install
C9.3
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C9.3
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C9.3
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C9.3
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C9.3
Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C9.3
Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C9.3
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove and Install
336E Excavator Engine Supplement
Service Magazine
Improved Crankshaft Rear Seals are Used on Certain C9 Machine Engines {1161, 7555}
2015/08/12
Improved Crankshafts are Now Used on Certain Cat<SUP>&reg;</SUP> Products {1202}
Improved Crankshafts are Now Used on Certain Cat® Products {1202}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Main Bearing Journal
C9.3 Engines for Caterpillar Built Machines
Cylinder Block
C9.3 Engines for Caterpillar Built Machines
Piston Cooling Jet
C9.3 Engines for Caterpillar Built Machines
Crankcase Pressure Sensor
C9.3 Engines for Caterpillar Built Machines
Cylinder Block Cover Group
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C9.3 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C9.3 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C9.3 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C9.3 Engines for Caterpillar Built Machines
Troubleshooting
Crankcase Pressure Is High
C9.3 Tier 4 Interim Engines
Crankcase Pressure Is Low
C9.3 Tier 4 Interim Engines
Cylinder Is Noisy
C9.3 Tier 4 Interim Engines
Disassembly and Assembly
Bearing Clearance - Check
C9.3
Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C9.3
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C9.3
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C9.3
Engines for Caterpillar Built Machines
Cylinder Liner - Install
C9.3
Engines for Caterpillar Built Machines
Cylinder Block Cover - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Valve Lash - Check
336E H Excavator
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Cylinder Head Valves
C9.3 Engines for Caterpillar Built Machines
Cylinder Head
C9.3 Engines for Caterpillar Built Machines
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C9.3
Engines for Caterpillar Built Machines
Cylinder Head - Remove
C9.3
Engines for Caterpillar Built Machines
Cylinder Head - Install
C9.3
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C9.3
Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
C9.3
Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
C9.3
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Specifications
Fastener Group (Vibration Damper)
C9.3 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Vibration Damper and Pulley - Remove and Install
336E Excavator Engine Supplement
Vibration Damper and Pulley - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
336E H Excavator
Specifications
Fan Drive
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fan Drive Mounting Group - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Fan and Fan Drive - Remove and Install
336E Excavator Engine Supplement
Fan Drive - Remove and Install
336E Excavator Engine Supplement
Fan Drive - Disassemble
336E Excavator Engine Supplement
Fan Drive - Assemble
336E Excavator Engine Supplement
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
C9.3 Engines for Caterpillar Built Machines
Flywheel
C9.3 Engines for Caterpillar Built Machines
Flywheel
C9.3 Engines for Caterpillar Built Machines
Flywheel
C9.3 Engines for Caterpillar Built Machines
Flywheel Housing
C9.3 Engines for Caterpillar Built Machines
Flywheel Housing
C9.3 Engines for Caterpillar Built Machines
Flywheel Housing
C9.3 Engines for Caterpillar Built Machines
Flywheel Housing
C9.3 Engines for Caterpillar Built Machines
Flywheel
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove
C9.3
Engines for Caterpillar Built Machines
Flywheel - Install
C9.3
Engines for Caterpillar Built Machines
Service Magazine
A New Flywheel Gear Ring is Now Used for the Flywheel Assembly on Certain Hydraulic Excavator Engines {1156}
A New Flywheel Gear Ring is Now Used for the Flywheel Assembly on Certain Hydraulic Excavator Engines {1156}
New Flywheel Assembly is Now Available on Certain C9.3 Machine Engines {1156}
New Flywheel Assembly is Now Available on Certain C9.3 Machine Engines {1156}
Specifications
Gear Group (Front)
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C9.3 Engines for Caterpillar Built Machines
Specifications
Flywheel Housing
C9.3 Engines for Caterpillar Built Machines
Flywheel Housing
C9.3 Engines for Caterpillar Built Machines
Flywheel Housing
C9.3 Engines for Caterpillar Built Machines
Flywheel Housing
C9.3 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Specifications
Crankshaft Seals
C9.3 Engines for Caterpillar Built Machines
Front Housing and Covers
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Housing (Front) - Remove
C9.3
Engines for Caterpillar Built Machines
Housing (Front) - Install
C9.3
Engines for Caterpillar Built Machines
Front Cover - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Technical Information Bulletin
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Service Magazine
A New Support Assembly Is Now Used on Certain C9.3 Machine Engines {1405, 1802}
A New Support Assembly Is Now Used on Certain C9.3 Machine Engines {1405, 1802}
Specifications
Engine Support (Front)
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Engine Front Mount - Remove and Install
336E Excavator Engine Supplement
Engine Rear Mount - Remove and Install
336E Excavator Engine Supplement
Operation and Maintenance Manual
Engine Oil Level - Check
336E H Excavator
Engine Oil and Filter - Change
336E H Excavator
Specifications
Engine Oil Pan
C9.3 Engines for Caterpillar Built Machines
Engine Oil Pan
C9.3 Engines for Caterpillar Built Machines
Engine Oil Pan
C9.3 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Oil Pan - Remove and Install
336E Excavator Engine Supplement
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod Bearing Journal
C9.3 Engines for Caterpillar Built Machines
Connecting Rod
C9.3 Engines for Caterpillar Built Machines
Piston Cooling Jet
C9.3 Engines for Caterpillar Built Machines
Piston and Rings
C9.3 Engines for Caterpillar Built Machines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C9.3 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
C9.3 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C9.3 Engines for Caterpillar Built Machines
Engine Crankcase Pressure (Blowby) - Test
C9.3 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C9.3 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C9.3
Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C9.3
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C9.3
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C9.3
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C9.3
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C9.3
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C9.3
Engines for Caterpillar Built Machines
Troubleshooting
Speed Control (PTO) - Test
C9.3 Tier 4 Interim Engines
Disassembly and Assembly
Rear Power Take-Off (RPTO) - Remove
C9.3
Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Install
C9.3
Engines for Caterpillar Built Machines
Specifications
Crankshaft Pulley
C9.3 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Crankshaft Vibration Damper and Pulley - Remove and Install
336E Excavator Engine Supplement
Vibration Damper and Pulley - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
336E H Excavator
Engine Valve Lash - Check
336E H Excavator
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Technical Information Bulletin
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Specifications
Valve Rocker Arms, Lifters, and Bridges
C9.3 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C9.3 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C9.3 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, AND 160M 3 MOTOR GRADERS, 336E, AND 336F EXCAVATORS, 568 FORESTRY MACHINES, 627H, AND 627K WHEEL TRACTOR-SCRAPERS, 725C ARTICULATED TRUCKS, 966M, 972K, AND 972M WHEEL LOADERS, D6T, AND D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VALVE LIFTERS AND GUIDE SPRINGS ON CERTAIN 336E, AND 336F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C9.3 Engines for Caterpillar Built Machines
Finding Top Center Position for No. 1 Piston
C9.3 Engines for Caterpillar Built Machines
Troubleshooting
Valve Lash Is Excessive
C9.3 Tier 4 Interim Engines
Disassembly and Assembly
Lifter Group - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C9.3
Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
C9.3
Engines for Caterpillar Built Machines
Rocker Arm - Assemble
C9.3
Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C9.3
Engines for Caterpillar Built Machines
Compression Brake - Remove
C9.3
Engines for Caterpillar Built Machines
Compression Brake - Disassemble - Valve Assembly
C9.3
Engines for Caterpillar Built Machines
Compression Brake - Assemble - Valve Assembly
C9.3
Engines for Caterpillar Built Machines
Compression Brake - Install
C9.3
Engines for Caterpillar Built Machines
Service Magazine
An Improved Guide Spring and Valve Lifter Assembly Are Used in Certain Machines Equipped with C-9, C9 ACERT Engines, and C9.3 ACERT Engines {1104, 1108}
2014/07/03
New Rocker Arm Is Now Used on Certain Cat<SUP>&reg;</SUP> Products {1123}
New Rocker Arm Is Now Used on Certain Cat® Products {1123}
Improved Rocker Arm Assembly is Now Used on Certain C9.3 Machine Engines {1123}
Improved Rocker Arm Assembly is Now Used on Certain C9.3 Machine Engines {1123}
Technical Information Bulletin
Valve Cover Leaks on Certain C9.3 Machine Engines {1107}
Valve Cover Leaks on Certain C9.3 Machine Engines {1107}

Truck sale:

Caterpillar 336ELH, Construction
165,010 USD 
Caterpillar 336ELH, Construction
- Crawler Excavators
TOROMONT CAT
Canada
Caterpillar 336ELH, Construction
242,265 USD 
Caterpillar 336ELH, Construction
- Crawler Excavators
TOROMONT CAT
Canada
Caterpillar 336ELH, Construction
203,500 
Caterpillar 336ELH, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.
Caterpillar 336ELH, Construction
189,000 
Caterpillar 336ELH, Construction
- Crawler Excavators
HOLT CAT
Caterpillar 336ELH, Construction
205,000 
Caterpillar 336ELH, Construction
- Crawler Excavators
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.