356-2977 CONTROL GP-DIFFERENTIAL LOCK S/N R9P1-UP PART OF 349-6146 POWER TRAIN AR 12M 2 MOTOR GRADER

Pos.	Part No	Qty	Parts name
1.	148-8443	[1]	TEE AS
	7X-2459	[1]	ADAPTER-TEE
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
2.	164-5567	[1]	COUPLER AS-QUICK DISCONNECT (MALE)
	6V-3965	[1]	FITTING (QUICK DISCONNECT)
	214-7568	[1]	SEAL-O-RING
3.	276-9459	[1]	TUBE AS
4.	280-7066	[1]	TUBE AS
5.	313-6460	[1]	PLATE AS
6.	148-8318	[1]	CONNECTOR AS
	6V-8634	[1]	CONNECTOR
	3K-0360	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
7.	148-8368	[1]	ELBOW AS
	6V-8627	[1]	ELBOW
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
8.	148-8378	[1]	ELBOW AS
	6V-8724	[1]	ELBOW
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
9.	250-2139 Y	[1]	VALVE & MTG GP-SOLENOID (DIFFERENTIAL LOCK)
10.	6V-0852	[1]	CAP-DUST
11.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-5005 M	[2]	BOLT (M10X1.5X70-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP63510491

331-5224: CONTROL GP-TRANSMISSION HYD

CONTROL GP-TRANSMISSION HYD

331-5224 CONTROL GP-TRANSMISSION HYD
S/N R3D1-UP
PART OF 364-8476 TRANSMISSION AR

i03950278 SEBP6351

3315224 CONTROL GP-TRANSMISSION HYD Parts scheme

For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2P-1692	[1]	SEAL-O-RING
2.	3K-0360	[1]	SEAL-O-RING
3.	3S-2093	[28]	STRAP-CABLE
4.	6D-7889	[8]	SEAL-O-RING
5.	6V-0852	[8]	CAP-DUST
6.	148-1925	[2]	VALVE-RELIEF
7.	155-5114	[3]	SPACER-SPECIAL
8.	165-4931	[4]	ELBOW AS
			(EACH INCLUDES)
	6V-8077	[1]	ELBOW
	3J-1907	[1]	SEAL-O-RING
9.	191-8303 Y	[2]	SENSOR GP-SPEED (TRANSMISSION OUTPUT)
10.	191-8304	[1]	SENSOR GP-SPEED (TRANSMISSION INPUT)
10A.	191-8304	[1]	SENSOR GP-SPEED (TRANSMISSION INTERMEDIATE 1)
10B.	191-8304	[1]	SENSOR GP-SPEED (TRANSMISSION INTERMEDIATE 2)
			(EACH INCLUDES)
	137-6645	[1]	PAD-CONNECTOR (CONNECTOR)
11.	211-0052	[1]	NUT (1-11/16-18-THD)
12.	356-0841	[1]	SWITCH AS-PRESSURE (PARKING BRAKE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (15-CM)
13.	235-3530 Y	[1]	VALVE GP-RELIEF (TRANSMISSION)
14.	238-0112	[1]	SENSOR GP-TEMPERATURE (TRANSMISSION OIL)
15.	244-3114 Y	[8]	VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH)
16.	247-4993	[1]	SPACER
17.	350-1107	[1]	VALVE GP-SOLENOID (PARKING BRAKE)
	245-1181	[1]	FLANGE
	245-1912	[1]	KIT-SEAL (SOLENOID VALVE)
			(INCLUDES O-RINGS)
18.	304-5687	[1]	CONTROL GP-UNPROGRAMMED (TRANSMISSION)
19.	288-1401	[1]	BRACKET
20.	310-0674	[1]	LOCKWASHER
21.	352-1478	[1]	HARNESS AS-TRANSMISSION
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[16]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (360-CM)
	114-8845 E		SLEEVE-PLASTIC (20-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	126-1766	[92]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	9X-3402	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	144-1636	[20]	PIN-CONNECTOR (14-GA TO 18-GA)
	9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[16]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	1P-0810 B	[1]	TAPE-ELECTRICAL
	211-0052	[1]	NUT (1-11/16-18-THD)
	212-9865	[1]	CONNECTOR (23-PIN)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	310-0674	[1]	LOCKWASHER
22.	104-6202	[1]	CLIP (LADDER)
23.	117-1385	[5]	SEAL-O-RING
24.	130-5300	[1]	CLIP
25.	132-5789	[9]	CLIP (LADDER)
26.	277-1873	[2]	CLIP (LADDER)
27.	4P-7429	[1]	CLIP (LADDER)
28.	4P-7581	[10]	CLIP (LADDER)
29.	5P-8347 M	[2]	BOLT (M8X1.25X70-MM)
30.	8C-5748 M	[1]	BOLT (M8X1.25X55-MM)
31.	6V-5215 M	[6]	BOLT (M8X1.25X16-MM)
32.	6V-5222 M	[3]	BOLT (M8X1.25X85-MM)
33.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
34.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
35.	6V-9028	[1]	SEAL-O-RING
36.	8C-3428	[1]	RING-RETAINING
37.	8T-0100 M	[20]	BOLT (M8X1.25X60-MM)
38.	8T-1158 M	[1]	BOLT-SOCKET HEAD (M8X1.25X20-MM)
39.	8T-4190 M	[1]	BOLT (M16X2X25-MM)
40.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
41.	8T-9655	[8]	MOUNT-ISOLATION
42.	9M-1974	[27]	WASHER-HARD (8.8X16X2-MM THK)
43.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
44.	9X-4609	[2]	SEAL-O-RING
45.	9X-8257	[1]	WASHER (17.5X30X3.5-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP63510492

423-4655: CONTROL GP-TRANSMISSION HYD

CONTROL GP-TRANSMISSION HYD

423-4655 CONTROL GP-TRANSMISSION HYD
S/N ZBE1-UP
PART OF 396-3357 TRANSMISSION AR

i05268303 SEBP6351

4234655 CONTROL GP-TRANSMISSION HYD Parts scheme

For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2P-1692	[1]	SEAL-O-RING
2.	6D-7889	[8]	SEAL-O-RING
3.	148-1925	[2]	VALVE-RELIEF (COOLER BYPASS)
4.	155-5114	[3]	SPACER-SPECIAL
5.	214-2484 Y	[2]	SENSOR GP-SPEED (TRANSMISSION OUTPUT)
6.	214-2485 Y	[1]	SENSOR GP-SPEED (TRANSMISSION INPUT)
6A.	214-2485 Y	[1]	SENSOR GP-SPEED (TRANSMISSION INTERMEDIATE 1)
6B.	214-2485 Y	[1]	SENSOR GP-SPEED (TRANSMISSION INTERMEDIATE 2)
7.	235-3530 Y	[1]	VALVE GP-RELIEF (MAIN)
8.	244-3114 Y	[8]	VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH)
9.	247-4993	[1]	SPACER
10.	275-8971	[1]	CONTROL GP-POWER TRAIN
11.	288-1401	[1]	BRACKET
12.	344-7389	[1]	SENSOR AS-PRESSURE (PARKING BRAKE OIL)
13.	252-2237 Y	[1]	VALVE GP-SOLENOID (24-VDC)(TRANSMISSION CONTROL)
14.	436-2451	[1]	HARNESS AS-TRANSMISSION
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[17]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (340-CM)
	114-8845 E		SLEEVE-PLASTIC (20-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)
	9X-3402	[90]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[90]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	9X-3401	[21]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[21]	PIN-CONNECTOR (14-GA TO 16-GA)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2270	[16]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	1P-0810 B		TAPE-ELECTRICAL
	211-0052	[1]	NUT (1-11/16-18-THD)
	212-9865	[1]	CONNECTOR (23-PIN)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	310-0674	[1]	LOCKWASHER
	374-7463	[1]	CAP-SEAL
15.	104-6202	[1]	CLIP (LADDER)
16.	132-5789	[10]	CLIP (LADDER)
17.	165-4931	[4]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8077	[1]	ELBOW
19.	214-7568	[1]	SEAL-O-RING
20.	238-0112	[1]	SENSOR GP-TEMPERATURE (TRANSMISSION OIL)
21.	277-1873	[2]	CLIP (LADDER)
23.	3S-2093	[29]	STRAP-CABLE
24.	4P-7581	[8]	CLIP (LADDER)
25.	4P-8134	[1]	CLIP (LADDER)
26.	5P-8347 M	[2]	BOLT (M8X1.25X70-MM)
27.	6V-0852	[8]	CAP-DUST
28.	6V-5215 M	[5]	BOLT (M8X1.25X16-MM)
29.	6V-5222 M	[3]	BOLT (M8X1.25X85-MM)
30.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
31.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
32.	6V-9028	[1]	SEAL-O-RING
33.	199-7560	[1]	RING-RETAINING
34.	8C-5748 M	[1]	BOLT (M8X1.25X55-MM)
35.	8T-0100 M	[20]	BOLT (M8X1.25X60-MM)
36.	8T-1158 M	[1]	BOLT-SOCKET HEAD (M8X1.25X20-MM)
37.	8T-4190 M	[1]	BOLT (M16X2X25-MM)
38.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
39.	8T-9655	[8]	MOUNT-ISOLATION
40.	9M-1974	[26]	WASHER-HARD (8.8X16X2-MM THK)
41.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
42.	9X-4609	[2]	SEAL-O-RING
43.	9X-8257	[1]	WASHER (17.5X30X3.5-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP63510493

350-5472: COOLER GP-TRANSMISSION OIL

COOLER GP-TRANSMISSION OIL

350-5472 COOLER GP-TRANSMISSION OIL
S/N MME1-UP
PART OF 382-4673 ENGINE AR-COMPLETE
FOR USE WITH C9 140/160 MG APPLICATIONS

i03967472 SEBP6351

3505472 COOLER GP-TRANSMISSION OIL Parts scheme

For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-8570	[1]	BONNET
2.	175-7453	[1]	CORE AS-TRANSMISSION COOLER
3.	180-3907	[1]	SEAL-INTEGRAL (TRANSMISSION COOLER)
4.	198-3462	[1]	DIVERTER
5.	377-9603	[1]	VALVE AS-FLUID SAMPLING
	6V-9027	[1]	SEAL-O-RING
	154-9023	[1]	VALVE-SAMPLING
6.	444-9156	[1]	BRACKET AS
	8T-3612 M	[2]	NUT-WELD (M8X1.25-THD)
	139-4255	[2]	SPACER (10X20X7-MM THK)
7.	357-1096	[1]	BONNET-COOLER
8.	129-2861	[2]	GASKET
9.	157-0670	[1]	CAP-DUST
10.	398-5614 J	[1]	PLUG AS
	6V-5064 J	[1]	SEAL-O-RING
	360-3684 J	[1]	PLUG
11.	5P-8347 M	[2]	BOLT (M8X1.25X70-MM)
12.	6V-2317 M	[6]	BOLT (M8X1.25X30-MM)
13.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
14.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
15.	398-5598	[1]	PLUG AS
	6V-9027	[1]	SEAL-O-RING
	360-3677	[1]	PLUG (7/16-20-THD)
16.	8C-2926 M	[3]	BOLT (M10X1.5X140-MM)
17.	8T-6854 M	[1]	BOLT (M10X1.5X200-MM)
18.	8T-9085 M	[2]	BOLT (M10X1.5X150-MM)
	J		M SERIES 2 ENGINES W/O A JACKET WATER HEATER ONLY. SEE 275-4260 FOR M SERIES ENGINES.
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP63510494

359-0100: COUPLING GP-TORSIONAL

COUPLING GP-TORSIONAL

359-0100 COUPLING GP-TORSIONAL
S/N R9P1-UP
PART OF 381-8796 COMMON AR

i04080672 SEBP6351

3590100 COUPLING GP-TORSIONAL Parts scheme

For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	442-8771	[1]	COUPLING AS-DRIVE
2.	165-3928	[12]	BOLT (3/8-16-THD)
3.	5M-2894	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)

#SEBP63510495

331-5222: COVER GP-SHIPPING

COVER GP-SHIPPING

331-5222 COVER GP-SHIPPING -TRANSMISSION
S/N R3D1-UP; ZBE1-UP
PART OF 364-8476, 396-3357 TRANSMISSION AR

i03963369 SEBP6351

For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
2.	7J-3554	[1]	COVER
4.	9H-0846	[1]	SEAL-O-RING
5.	117-2927	[1]	COVER-SHIPPING
6.	126-1773	[1]	CAP-CONNECTOR
9.	179-1539	[1]	GASKET
11.	148-8406	[2]	PLUG AS
			(EACH INCLUDES)
	9S-9334	[1]	PLUG (1-5/16-12-THD)
	7M-8485	[1]	SEAL-O-RING
12.	148-8407	[2]	PLUG AS
			(EACH INCLUDES)
	9S-4191	[1]	PLUG (9/16-18-THD)
	3J-1907	[1]	SEAL-O-RING
13.		[1]	PLUG AS
	9S-4183	[1]	PLUG (1-1/16-12-THD)
	3D-2824	[1]	SEAL-O-RING
16.	179-1538	[1]	COVER
17.	2D-0094	[1]	GASKET
18.	5P-8245	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
19.	6V-3823 M	[10]	BOLT (M12X1.75X60-MM)
20.	6V-8149 M	[10]	NUT (M12X1.75-THD)
21.	6V-9833	[1]	CAP
22.	8T-0293 M	[2]	BOLT (M12X1.75X20-MM)
23.	8E-5287	[1]	STRAP
24.	9M-2904	[1]	CLAMP-HOSE
	M		METRIC PART

#SEBP63510496

365-2124: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

365-2124 DIFFERENTIAL & BEVEL GEAR GP
S/N R9P1-UP
PART OF 365-2125 AXLE GP-REAR

i04070009 SEBP6351

3652124 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7D-1677	[1]	RACE-BEARING INNER
2.	1J-2860	[1]	CUP-BEARING
3.	2D-9455	[1]	CONE-BEARING
4.	7S-4001	[1]	SEAL-O-RING
5.	201-7713	[1]	BEARING AS
6.	201-8481	[1]	LOCKNUT AS
	314-3260	[4]	BOLT-LOCKING (M8X1.25X18-MM)
7.	222-7843	[1]	SHROUD
8.	264-0575	[1]	SEAL-LIP TYPE
9.	272-7121	[1]	YOKE AS
	271-8680	[1]	GUARD
10.	271-8528 B	[1]	SHIM PACK (INCLUDES 18-SHIMS)
11.	271-8529	[1]	RETAINER
12.	272-7116	[1]	HOUSING-PINION
13.	287-8223 Y	[1]	DIFFERENTIAL GP
14.	293-0213	[1]	SHAFT-BEVEL PINION
15.	290-7296 M	[20]	BOLT (M16X2X40-MM)
16.	309-8763	[1]	GEAR-BEVEL (44-TEETH)
17.	5A-3604 M	[3]	BOLT-SOCKET HEAD (M8X1.25X25-MM)
18.	1J-4757	[1]	CONE-BEARING
19.	2D-9454	[1]	CUP-BEARING
20.	8C-0622	[1]	RING-RETAINING
21.	286-9155 M	[1]	BOLT-SELF-LOCKING (M16X2X120-MM)
22.	9X-8268	[20]	WASHER (17.5X30X3.5-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP63510497

287-8223: DIFFERENTIAL GP

DIFFERENTIAL GP

287-8223 DIFFERENTIAL GP
S/N R9P1-UP
PART OF 365-2124 DIFFERENTIAL & BEVEL GEAR GP

i02641236 SEBP6351

For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5F-9144	[3]	SEAL-O-RING
2.	148-7841	[3]	SPRING
3.	201-8476	[9]	PLATE-SEPARATOR
4.	201-8477	[9]	DISC-FRICTION
5.	201-8480	[1]	PLATE-THRUST
6.	221-8040	[3]	DOWEL
7.	239-3105	[1]	RING-THRUST
8.	287-8222	[1]	CASE AS-DIFFERENTIAL
8A.	8T-5002 M	[8]	BOLT (M16X2X180-MM)
8B.	2S-0736	[8]	WASHER-HARD (17X27X3.5-MM THK)
9.	293-5368	[4]	BUSHING
10.	305-3353	[2]	WASHER-THRUST
11.	305-3352	[4]	WASHER-THRUST
12.	306-5622	[1]	SPIDER
13.	306-5628	[1]	GEAR-DIFFERENTIAL BEVEL (44-TEETH)
14.	306-5629	[1]	GEAR-DIFFERENTIAL BEVEL (16-TEETH)
15.	306-5635	[4]	PINION-DIFFERENTIAL

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	M		METRIC PART

#SEBP63510498

288-6508: DRIVE GP-FINAL

DRIVE GP-FINAL

288-6508 DRIVE GP-FINAL -RH
S/N R9P1-UP
PART OF 365-2125 AXLE GP-REAR

i02708346 SEBP6351

For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-8394	[2]	CUP-BEARING
2.	547-6515	[1]	WASHER-THRUST (261.8X309X7-MM THK)
3.	7D-8439 B	[5]	SHIM (0.007-IN THK)
4.	7D-8441 B	[5]	SHIM (0.005-IN THK)
5.	8D-3902	[1]	SEAL-LIP TYPE
6.	9D-3075	[1]	RETAINER
7.	9D-7047 B	[2]	SHIM (0.02-MM THK)
8.	202-6473 M	[30]	BOLT (M16X2X60-MM)
9.	255-8575	[1]	SHAFT-DRIVE
10.	264-0194	[1]	RETAINER
11.	264-0196 B	[1]	SHIM PACK (INCLUDES 10-SHIMS)
12.	266-0199	[2]	RING-WEAR
14.	272-8009 Y	[1]	CARRIER GP-FINAL DRIVE
15.	278-3320	[2]	SPROCKET
16.	279-2568	[1]	GEAR-RING (84-TEETH)
17.	329-0411	[1]	SEAL-LIP TYPE
18.	284-5016	[1]	HOUSING
19.	291-6874	[1]	HOUSING-FINAL DRIVE
20.	6V-3303 M	[3]	BOLT (M16X2X60-MM)
21.	198-4768	[24]	WASHER-HARD (17.5X32X8-MM THK)
22.	2B-9174	[1]	BEARING AS-TAPERED ROLLER
23.	4D-3704	[18]	WASHER-HARD (17X30X5-MM THK)
24.	4D-6695	[1]	SEAL-O-RING
25.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	6V-2449	[1]	CONE-BEARING
27.	8T-0372 M	[3]	BOLT (M12X1.75X90-MM)
28.	8T-3727	[1]	RING-RETAINING
29.	9F-2247	[1]	PLUG-PIPE (1/8-27-THD)
30.	178-3707 M	[12]	BOLT (M16X2X50-MM)
31.	328-9669	[1]	WASHER-THRUST (261.8X303X7-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP63510499

288-6509: DRIVE GP-FINAL

DRIVE GP-FINAL

288-6509 DRIVE GP-FINAL -LH
S/N R9P1-UP
PART OF 365-2125 AXLE GP-REAR

i02708344 SEBP6351

For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-8394	[2]	CUP-BEARING
2.	547-6515	[1]	WASHER-THRUST (261.8X309X7-MM THK)
3.	7D-8439 B	[5]	SHIM (0.007-IN THK)
	7D-8441 BF	[5]	SHIM (0.005-IN THK)
5.	8D-3902	[1]	SEAL-LIP TYPE
6.	9D-3075	[1]	RETAINER
7.	9D-7047 B	[2]	SHIM (0.02-MM THK)
8.	202-6473 M	[30]	BOLT (M16X2X60-MM)
9.	255-8575	[1]	SHAFT-DRIVE
10.	264-0194	[1]	RETAINER
11.	264-0196 B	[1]	SHIM PACK (INCLUDES 10-SHIMS)
12.	266-0199	[2]	RING-WEAR
14.	272-8009 Y	[1]	CARRIER GP-FINAL DRIVE
15.	278-3320	[2]	SPROCKET
16.	279-2568	[1]	GEAR-RING (84-TEETH)
17.	329-0411	[1]	SEAL-LIP TYPE
18.	284-5018	[1]	HOUSING
19.	291-6874	[1]	HOUSING-FINAL DRIVE
20.	6V-3303 M	[3]	BOLT (M16X2X60-MM)
21.	198-4768	[24]	WASHER-HARD (17.5X32X8-MM THK)
22.	2B-9174	[1]	BEARING AS-TAPERED ROLLER
23.	4D-3704	[18]	WASHER-HARD (17X30X5-MM THK)
24.	4D-6695	[1]	SEAL-O-RING
25.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	6V-2449	[1]	CONE-BEARING
27.	8T-0372 M	[3]	BOLT (M12X1.75X90-MM)
28.	8T-3727	[1]	RING-RETAINING
29.	9F-2247	[1]	PLUG-PIPE (1/8-27-THD)
30.	178-3707 M	[12]	BOLT (M16X2X50-MM)
31.	328-9669	[1]	WASHER-THRUST (261.8X303X7-MM THK)
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION