AVSPARE.COM
parts catalog

348-7946 VALVE GP-SOLENOID S/N MME1-UP 24-VOLT. BALANCE PART OF 382-4673, 395-0360 ENGINE AR-COMPLETE 12M 2


AIR INLET AND EXHAUST SYSTEM
EXHAUST GP
FUEL SYSTEM
FILTER GP-FUEL
COOLER GP
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
LINES GP-FUEL INJECTION
FUEL SYSTEM GP
PUMP GP-UNIT INJECTOR HYD


AIR INLET AND EXHAUST SYSTEM

EXHAUST GP
 

#SEBP63520180
 

348-7946: VALVE GP-SOLENOID

348-7946 VALVE GP-SOLENOID
S/N MME1-UP
24-VOLT. BALANCE
PART OF 382-4673, 395-0360 ENGINE AR-COMPLETE
i03957209 SEBP6352
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 549-0532 [1] VALVE GP-AIR CONTROL (24-VOLT)  
2. 287-3049 M [1] STUD (M10X1.5X50-MM)  
3. 4J-3014 [1] SPACER (0.844-MM THK)  
4. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP63520181
 

349-4571: BASE GP-FUEL FILTER

349-4571 BASE GP-FUEL FILTER
S/N MME1-UP
PART OF 349-3927 FILTER GP-FUEL
i04041878 SEBP6352
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 234-5013 Y [1] SENSOR GP-TEMPERATURE (FUEL)  
2. 396-0373 [1] CONNECTOR AS  
  214-7567 [1] SEAL-O-RING  
  303-3020 [1] CONNECTOR  
3. 8L-2786 [1] SEAL-O-RING  
4. 325-8634 Y [2] SENSOR GP-PRESSURE (FUEL)  
5. 348-7307 [1] BASE AS-FUEL FILTER  
  9S-4167 [2] STUD-HOLLOW (1-14X1.47-IN)  
6. 308-9679 [2] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 9S-8005 [1] PLUG (3/4-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP63520182
 

324-5424: COOLER GP-FUEL

324-5424 COOLER GP-FUEL
S/N F9B1-UP
PART OF 341-1803 COOLING AR
i03934292 SEBP6352
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 331-6086 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 334-3326 [1] COOLER AS-FUEL  
3. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
5. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP63520183
 

346-5148: FASTENER GP-FUEL INJ PUMP

346-5148 FASTENER GP-FUEL INJ PUMP
S/N MME9719-UP
PART OF 382-4673, 395-0360 ENGINE AR-COMPLETE
FOR USE WITH 3-LOBE HIGH PRESSURE PUMPS
i04469039 SEBP6352
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 307-1669 [1] TUBE AS  
2. 6K-9194 [1] ELBOW  
3. 382-3965 CM [1] STUD (M8X1.25X40.7-MM, M8X1.25X40-MM)  
4. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
5. 6V-7981 M [3] BOLT (M10X1.5X70-MM)  
6. 6V-8260 [1] SEAL-O-RING  
7. 9M-1974 C [1] WASHER-HARD (8.8X16X2-MM THK)  
8. 396-3850 [1] PLUG AS  
  228-7089 [1] SEAL-O-RING  
  364-0628 [1] PLUG-SPECIAL (FUEL PUMP TIMING)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP63520184
 

349-3927: FILTER GP-FUEL

349-3927 FILTER GP-FUEL
S/N MME1-UP
PART OF 382-4673, 395-0360 ENGINE AR-COMPLETE
FOR USE WITH FUEL FILTER MOUNTING GP
i04102730 SEBP6352
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9655 [6] MOUNT-ISOLATION  
2. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
3. 191-1783 [2] SPACER (8.5X12.7X87.3-MM THK)  
4. 360-1693 CY [1] PUMP GP-FUEL PRM & PRIM FILTER  
5. 349-4571 Y [1] BASE GP-FUEL FILTER  
6. 227-6715 M [1] STUD (M10X1.5X30-MM)  
7. 260-9219 [1] CONNECTOR AS  
  6V-8638 [1] CONNECTOR  
  228-7090 [1] SEAL-O-RING  
  238-5081 [1] SEAL-O-RING  
8. 307-2673 [1] PLUG AS  
  9S-8005 [1] PLUG (3/4-16-THD)  
  238-5080 [1] SEAL-O-RING  
9. 309-5131 [3] PLUG AS  
    (EACH INCLUDES)
  9S-8006 [1] PLUG (7/8-14-THD)  
  238-5081 [1] SEAL-O-RING  
10. 319-6225 [1] ELBOW AS  
  6V-8625 [1] ELBOW  
  228-7090 [1] SEAL-O-RING  
  238-5080 [1] SEAL-O-RING  
11. 319-6228 [1] ELBOW AS  
  6V-8721 [1] ELBOW  
  228-7090 [1] SEAL-O-RING  
  238-5081 [1] SEAL-O-RING  
12. 335-3982 [1] ELBOW AS  
  6V-8627 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
  228-7088 [1] SEAL-O-RING  
13. 353-5105 [1] ADAPTER AS  
  030-8194 [1] CONNECTOR  
  238-5081 [1] SEAL-O-RING  
14. 6V-1820 M [4] BOLT (M10X1.5X30-MM)  
15. 6V-3821 M [2] BOLT (M8X1.25X110-MM)  
16. 6V-5839 [5] WASHER (11X21X2.5-MM THK)  
17. 8T-0100 M [1] BOLT (M8X1.25X60-MM)  
18. 9N-0869 [6] WASHER-HARD (8.8X25.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP63520185
 

212-9580: FILTER GP-WATER SEP & FUEL

212-9580 FILTER GP-WATER SEP & FUEL
S/N MME1-UP
PART OF 360-1693 PUMP GP-FUEL PRM & PRIM FILTER
i03437843 SEBP6352
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 326-1643 [1] FILTER AS-WATER SEP & FUEL (PRIMARY)  
1A. 220-8678 [1] SEAL-RING (FUEL FILTER)  
2. 343-5527 [1] BOWL AS  
2A. 3J-1907 J [1] SEAL-O-RING  
2B. 5F-9144 [1] SEAL-O-RING  
2C. 8F-7219 [1] SEAL-O-RING  
2D. 9S-8004 J [1] PLUG (9/16-18-THD)  
  J   PARTS MARKED J ARE USED WITH BOWL ASSEMBLY WHEN PLASIC PLUG IS NOT USED.
 

#SEBP63520186
 

456-3493: INJECTOR GP-FUEL

456-3493 INJECTOR GP-FUEL
S/N MME1-UP
PART OF 345-1974 PUMP GP-FUEL INJECTION
i06050713 SEBP6352
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 263-4016 [1] SEAL  
2. 326-2041 [1] SEAL  
3. 326-2042 [1] SEAL  
 

#SEBP63520187
 

457-3996: KIT-FUEL SYSTEM PARTS

457-3996 KIT-FUEL SYSTEM PARTS
S/N F9B1-UP
FOR USE WITH REHS9229, TIER 4 MACHINES THAT HAVE ENTERED INTO REGIONS WITHOUT ULTRA LOW SULFUR FUEL
FIELD INSTALLATION
i05815036 SEBP6352
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  434-3158 Y [1] PUMP GP-FUEL PRM & PRIM FILTER  
  6V-5221 M [1] BOLT (M8X1.25X80-MM)  
  7X-0457 M [2] BOLT (M8X1.25X130-MM)  
  124-6275 [1] CLAMP-HOSE  
  425-5634 [1] CONNECTOR  
  8T-0119 [1] ELBOW  
  300-6714 [6] MOUNT  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  214-7568 [1] SEAL-O-RING  
  228-7088 [1] SEAL-O-RING  
  228-7090 [2] SEAL-O-RING  
  238-5080 [2] SEAL-O-RING  
  238-5081 [2] SEAL-O-RING  
  164-0150 [3] SPACER (9X20X20-MM THK)  
  421-5683 [1] VALVE-CHECK  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP63520188
 

459-6728: KIT-FUEL SYSTEM PARTS

459-6728 KIT-FUEL SYSTEM PARTS
S/N F9B1-UP
FOR USE WITH REHS9236, TIER 4 MACHINES THAT HAVE ENTERED INTO REGIONS WITHOUT ULTRA LOW SULFER FUEL
FIELD INSTALLATION
i05814004 SEBP6352
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  434-3167 Y [1] PUMP GP-FUEL PRIMING  
  7X-2540 M [2] BOLT (M8X1.25X120-MM)  
  8T-6870 M [1] BOLT (M8X1.25X70-MM)  
  475-7087 [1] BRACKET AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
  425-5634 [1] CONNECTOR  
  438-5386 [1] FILTER AS-WATER SEP & FUEL (ULTRA HIGH EFFICIENCY)  
  416-1225 [2] FILTER-FUEL (ULTRA HIGH EFFICIENCY)  
  2M-9780 [1] SEAL-O-RING  
  214-7568 [1] SEAL-O-RING  
  228-7089 [1] SEAL-O-RING  
  228-7091 [1] SEAL-O-RING  
  228-7092 [1] SEAL-O-RING  
  238-5081 [2] SEAL-O-RING  
  349-7901 [3] SPACER (9X20X15-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP63520189
 

349-0676: KIT-SEAL

349-0676 KIT-SEAL
S/N R3D1-UP; ZBE1-UP
POWER SHIFT TRANSMISSION OVERHAUL
FOR USE WITH @@@@@364-8476@@@@@, @@@@@396-3357@@@@@
FIELD INSTALLATION
i06851171 SEBP6352
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6V-0852 [13] CAP-DUST  
  8C-3447 [2] CAP-DUST  
  145-8039 [3] LOCK  
  7G-4822 [12] RING-SEAL  
  8E-5742 [8] RING-SEAL (INTERNAL)  
  9W-9371 [3] RING-SEAL  
  8E-5734 [4] RING-SEAL EXTENSION  
  8E-5736 [2] RING-SEAL EXTENSION  
  188-0633 [1] SEAL-BRAKE  
  246-8777 [1] SEAL-BRAKE  
  193-2200 [1] SEAL-LIP TYPE  
  2M-9780 [5] SEAL-O-RING  
  2P-1692 [1] SEAL-O-RING  
  2S-4078 [2] SEAL-O-RING  
  2S-4663 [1] SEAL-O-RING  
  3D-2824 [8] SEAL-O-RING  
  3J-1907 [4] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  3K-0715 [1] SEAL-O-RING  
  4F-7952 [1] SEAL-O-RING  
  4J-0520 [1] SEAL-O-RING  
  4J-8996 [2] SEAL-O-RING  
  5F-3092 [1] SEAL-O-RING  
  5K-9090 [2] SEAL-O-RING  
  5P-3863 [4] SEAL-O-RING  
  5P-7815 [1] SEAL-O-RING  
  5P-8211 [1] SEAL-O-RING  
  6D-7889 [8] SEAL-O-RING  
  6V-5048 [4] SEAL-O-RING  
  6V-5050 [1] SEAL-O-RING  
  6V-5759 [2] SEAL-O-RING  
  6V-9028 [1] SEAL-O-RING  
  7M-8485 [9] SEAL-O-RING  
  8C-3089 [1] SEAL-O-RING  
  8F-3469 [14] SEAL-O-RING  
  8L-2786 [2] SEAL-O-RING  
  8M-4992 [1] SEAL-O-RING  
  9X-4609 [2] SEAL-O-RING  
  112-1574 [2] SEAL-O-RING  
  203-3940 [5] SEAL-O-RING  
  161-8068 [3] SEAL-O-RING  
  171-9375 [1] SEAL-O-RING  
  214-7568 [16] SEAL-O-RING  
  6Y-5010 [8] WASHER (10.16X19X0.84-MM THK)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

Information:

Operation and Maintenance Manual
ARD Spark Plug - Replace
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Diesel Particulate Filter - Clean - Emission Related Component
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Install an Air Cleaner Cover on Certain Motor Graders {1051, 1054, 1055, 1071, 7150, 7263, 795C}
Procedure to Install an Air Cleaner Cover on Certain Motor Graders {1051, 1054, 1055, 1071, 7150, 7263, 795C}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
Service Letter-Americas
Technical Information Bulletin
Inspecting the Diesel Oxidation Catalyst (DOC) and the Diesel Particulate Filter (DPF) After the NRS Cooler Fails{108F, 108G}
Inspecting the Diesel Oxidation Catalyst (DOC) and the Diesel Particulate Filter (DPF) After the NRS Cooler Fails{108F, 108G}
Ordering NOx Reduction System Coolers for C9.3, C13, C15, and C18 Engines {108G}
Ordering NOx Reduction System Coolers for C9.3, C13, C15, and C18 Engines {108G}
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
Systems Operation
Clean Emissions Module
C9.3 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR TESTING AND POSSIBLY REPLACING THE AFTERTREATMENT FAN ON CERTAIN 120M2, 140M2, 140M3, 160M2, 160M3, 12M2, 12M3, 14M3, 16M3, AND 18M3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 12M2, 140M2, AND 160M2 MOTOR GRADERS
Testing and Adjusting
Exhaust Cooler (NRS) - Clean
C9.3 Engines for Caterpillar Built Machines
Exhaust Cooler (NRS) - Test
C9.3 Engines for Caterpillar Built Machines
Troubleshooting
NRS Exhaust Gas Temperature Is High
C9.3 Tier 4 Interim Engines
NOx Reduction System (NRS) - Test
C9.3 Tier 4 Interim Engines
Disassembly and Assembly
Exhaust Manifold - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Combustion Head - Remove and Install - Clean Emissions Module
C9.3
Engines for Caterpillar Built Machines

Flame Detection Temperature Sensor - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Muffler - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Exhaust Elbow - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Exhaust Cooler (NRS) - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Exhaust Sensor Lines - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Service Magazine
A New Air Intake Cover is Now Available for Certain Motor Graders {1051, 1054, 1055, 1071, 7150, 7263, 795C}
A New Air Intake Cover is Now Available for Certain Motor Graders {1051, 1054, 1055, 1071, 7150, 7263, 795C}

Caterpillar Parts SIS Catalog 12M 2 :

Truck sale:

 
181,000 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
 
187,500 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
 
289,000 
Caterpillar 12M2, Construction
- motor graders
WAGNER EQUIPMENT CO
 
170,000 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
205,000 
Caterpillar 12M2, Construction
- motor graders
CAROLINA CAT
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.