FUEL SYSTEM
PUMP GP-FUEL PRIMINGPUMP GP-FUEL INJECTION
TANK GP-FUEL
FUEL SYSTEM
PUMP GP-FUEL PRIMING#SEBP63520210
434-3167: PUMP GP-FUEL PRIMING
434-3167 PUMP GP-FUEL PRIMING
S/N F9B1-UP
PART OF 459-6728 KIT-FUEL SYSTEM PARTS, 434-3158 PUMP GP-FUEL PRM & PRIM FILTER
S/N F9B1-UP
PART OF 459-6728 KIT-FUEL SYSTEM PARTS, 434-3158 PUMP GP-FUEL PRM & PRIM FILTER
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP63520211
360-1693: PUMP GP-FUEL PRM & PRIM FILTER
360-1693 PUMP GP-FUEL PRM & PRIM FILTER
S/N MME1-UP
24-VOLT
PART OF 349-3927 FILTER GP-FUEL
S/N MME1-UP
24-VOLT
PART OF 349-3927 FILTER GP-FUEL
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP63520212
434-3158: PUMP GP-FUEL PRM & PRIM FILTER
434-3158 PUMP GP-FUEL PRM & PRIM FILTER
S/N F9B1-UP
CAT REGENERATION SYSTEM
PART OF 457-3996 KIT-FUEL SYSTEM PARTS
S/N F9B1-UP
CAT REGENERATION SYSTEM
PART OF 457-3996 KIT-FUEL SYSTEM PARTS
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP63520213
362-0769: RAIL GP-FUEL
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP63520214
422-8408: RAIL GP-FUEL
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP63520215
270-6987: TANK GP-FUEL
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP63520216
330-3562: TANK GP-FUEL
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7K-1181 | [2] | STRAP-CABLE | |
2. | 349-7059 HW | [1] | CAP AS-FUEL (LOCKABLE, VENTED)(EXTREME SERVICE) | |
7D-7111 | [1] | SEAL-O-RING | ||
3. | 199-9907 | [1] | STRAINER-FUEL | |
4. | 330-3566 | [2] | GASKET | |
5. | 330-3568 | [1] | GASKET | |
6. | 377-6222 C | [1] | TUBE | |
7. | 380-0680 C | [1] | VENT AS | |
8. | 362-1307 C | [1] | TANK AS-FUEL (LH) | |
9. | 162-2165 M | [14] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
10. | 269-1021 | [1] | SENDER AS-FUEL LEVEL (WITH GAUGE) | |
6C-3060 | [1] | GASKET | ||
363-4122 | [1] | GASKET | ||
(USE GASKET FOR BIO-DIESEL APPLICATION) | ||||
376-1555 | [1] | KIT-DIAL SENSOR | ||
(INCLUDES SENSOR AS & SCREW) | ||||
8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
11. | 306-8127 | [1] | ADAPTER | |
12. | 329-3707 | [1] | SCREW-PAN HEAD (6X0.375-IN) | |
13. | 4B-4863 | [14] | WASHER (4.7X11X1.2-MM THK) | |
14. | 9M-7958 | [2] | CLAMP-HOSE | |
15. | 146-7453 E | HOSE (113-CM) | ||
16. | 160-2246 G | SLEEVE-ABRASION (41-IN) | ||
AVAILABLE REPAIR KIT(S): | ||||
350-7735 H | [1] | KIT-CAP FILTER (FUEL TANK) | ||
(INCLUDES FILTER AS, SCREWS, GASKETS, & WASHERS) | ||||
C | CHANGE FROM PREVIOUS TYPE | |||
E | ORDER BY THE CENTIMETER | |||
G | ORDER BY THE INCH | |||
H | KIT MARKED H SERVICES PART(S) MARKED H | |||
M | METRIC PART | |||
W | REQUIRES CORPORATE KEY |
#SEBP63520217
330-3563: TANK GP-FUEL
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7K-1181 | [2] | STRAP-CABLE | |
2. | 460-3760 | [2] | GASKET | |
3. | 377-6222 C | [2] | TUBE | |
4. | 362-1308 C | [1] | TANK AS-FUEL (RH) | |
[8] | INSERT | |||
5. | 221-3700 CM | [8] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
6. | 478-7893 C | [8] | WASHER-HARD (4.7X11X1.2-MM THK) | |
7. | 9M-7958 | [2] | CLAMP-HOSE | |
8. | 423-1986 G | HOSE (44.1-IN) | ||
9. | 160-2246 G | SLEEVE-ABRASION (40.2-IN) | ||
C | CHANGE FROM PREVIOUS TYPE | |||
G | ORDER BY THE INCH | |||
M | METRIC PART |
#SEBP63520218
357-5030: TANK GP-FUEL
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 361-2115 | [1] | PLUG-DRAIN | |
2. | 8C-5053 | [1] | ADAPTER | |
3. | 250-9305 | [1] | BUSHING | |
4. | 122-8905 | [1] | ELBOW (90-DEG) | |
5. | 228-7090 | [1] | SEAL-O-RING | |
6. | 214-7568 | [1] | SEAL-O-RING | |
7. | 238-5084 | [1] | SEAL-O-RING | |
8. | 9M-7958 | [3] | CLAMP-HOSE | |
9. | 9S-4181 | [1] | PLUG (1-5/16-12-THD) | |
10. | 357-5031 | [1] | FILTER (STRAINER)(FUEL) | |
11. | [1] | TANK-FUEL |
#SEBP63520219
382-6931: TANK GP-FUEL
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SISInformation:
FUEL SYSTEM
PUMP GP-FUEL PRIMING
Truck Engine News
Engine News
Operation and Maintenance Manual
Special Instruction
Procedure to Repair the Pump for the Aftertreatment Regeneration Device (ARD) {1258}
Procedure to Repair the Pump for the Aftertreatment Regeneration Device (ARD) {1258}
Procedure to Repair the Pump for the Aftertreatment Regeneration Device (ARD) {1258}
Technical Information Bulletin
Inspect the Fuel Filter and Water Separator for Damage Prior to Installation on Certain Caterpillar Equipment{1258, 1260, 1261}
Inspect the Fuel Filter and Water Separator for Damage Prior to Installation on Certain Caterpillar Equipment{1258, 1260, 1261}
Inspect the Fuel Filter and Water Separator for Damage Prior to Installation on Certain Caterpillar Equipment{1258, 1260, 1261}
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting
Disassembly and Assembly
Fuel Priming Pump and Water Separator - Remove and Install
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement
Service Magazine