ELECTRICAL AND STARTING SYSTEM
MOTOR GPWIRING GP
CONTROL GP-GRADE
LIGHTING GP
CIRCUIT BREAKER GP
ELECTRICAL AND STARTING SYSTEM
MOTOR GP
#SEBP63520360
386-9663: MOTOR GP-ELECTRIC
386-9663 MOTOR GP-ELECTRIC -CIRCULATING FAN
S/N F9B135-UP
27-VOLT, COUNTER CLOCKWISE LEAD END
PART OF 170-5334 FAN GP-CIRCULATING
AN ATTACHMENT
S/N F9B135-UP
27-VOLT, COUNTER CLOCKWISE LEAD END
PART OF 170-5334 FAN GP-CIRCULATING
AN ATTACHMENT
For full view, you need register
#SEBP63520361
436-9180: MOTOR GP-ELECTRIC
436-9180 MOTOR GP-ELECTRIC -CIRCULATING FAN
S/N F9B1-UP
27-VOLT, COUNTER CLOCKWISE LEAD END
PART OF 170-5334 FAN GP-CIRCULATING
AN ATTACHMENT
S/N F9B1-UP
27-VOLT, COUNTER CLOCKWISE LEAD END
PART OF 170-5334 FAN GP-CIRCULATING
AN ATTACHMENT
For full view, you need register
#SEBP63520362
343-9072: MOUNTING GP-CONNECTOR
343-9072 MOUNTING GP-CONNECTOR
S/N MME1-UP
PROVIDES A BRACKET THAT SECURES A 40-PIN INTERFACE, PROVIDES MOUNTING SUPPORT FOR THE FOAMED WIRING HARNESS ON C9 TIER 4 ENGINES
PART OF 382-4673, 395-0360 ENGINE AR-COMPLETE
FOR USE WITH TIER 4 EXTERNAL HARNESSES, FUEL COOLED ECM
CANNOT BE USED WITH AIR COOLED ECM
S/N MME1-UP
PROVIDES A BRACKET THAT SECURES A 40-PIN INTERFACE, PROVIDES MOUNTING SUPPORT FOR THE FOAMED WIRING HARNESS ON C9 TIER 4 ENGINES
PART OF 382-4673, 395-0360 ENGINE AR-COMPLETE
FOR USE WITH TIER 4 EXTERNAL HARNESSES, FUEL COOLED ECM
CANNOT BE USED WITH AIR COOLED ECM
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 325-1872 | [1] | COVER AS | |
| 2. | 352-8980 | [1] | PLATE AS | |
| 6V-6716 | [2] | RIVET-TRUSS HEAD | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 8T-8874 M | [8] | NUT-WELD (M5X0.8-THD) | ||
| 9R-2160 M | [1] | BOSS (M8X1.25X25-MM) | ||
| 109-1645 | [1] | CLIP | ||
| 3. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 4. | 178-3336 M | [4] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 5. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 6. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP63520363
298-3643: MOUNTING GP-GRADE CONTROL
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 287-6688 | [2] | PLATE | |
| 2. | 288-0693 | [4] | BLOCK | |
| 3. | 288-5515 | [1] | PLATE AS | |
| 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | ||
| 4. | 288-5516 | [1] | PLATE AS | |
| 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | ||
| 5. | 298-3644 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 096-4883 M | [4] | LOCKNUT (M10X1.5-THD) | |
| 7. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 10. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| M | METRIC PART | |||
#SEBP63520364
290-2016: MOUNTING GP-LAMP
290-2016 MOUNTING GP-LAMP
S/N F9B1-UP
PART OF 233-3126 INSTALLATION GP-LIGHTING
AN ATTACHMENT
S/N F9B1-UP
PART OF 233-3126 INSTALLATION GP-LIGHTING
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
#SEBP63520365
308-9370: MOUNTING GP-LIGHTING
308-9370 MOUNTING GP-LIGHTING -ROADING LIGHTS
S/N F9B1-UP
LOW BAR
PART OF 309-9879 LIGHTING GP-ROADING
Type 1
CANNOT BE USED WITH @@@@@308-9371@@@@@
AN ATTACHMENT
S/N F9B1-UP
LOW BAR
PART OF 309-9879 LIGHTING GP-ROADING
Type 1
CANNOT BE USED WITH @@@@@308-9371@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-0617 | [2] | CLAMP | |
| 2. | 2G-0988 | [2] | CAP | |
| 3. | 3K-9520 | [3] | GROMMET | |
| 4. | 137-9410 | [2] | CLAMP | |
| 5. | 236-2335 | [1] | HARNESS AS-FRONT LIGHTING | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 9W-0844 | [10] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (80-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6. | 250-4330 | [1] | TUBE | |
| 7. | 331-3710 | [2] | BRACKET AS | |
| 8. | 259-9288 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, RH) | |
| 9. | 259-9287 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, LH) | |
| 10. | 130-5300 | [2] | CLIP | |
| 11. | 130-5301 | [2] | CLIP | |
| 12. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 5P-9135 | [1] | GROMMET | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 17. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 18. | 8T-5001 M | [4] | BOLT (M12X1.75X130-MM) | |
| 19. | 7K-1181 | [1] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63520366
308-9370: MOUNTING GP-LIGHTING
308-9370 MOUNTING GP-LIGHTING -ROADING LIGHTS
S/N F9B1-UP
LOW BAR
PART OF 309-9879 LIGHTING GP-ROADING
Type 2
CANNOT BE USED WITH @@@@@308-9371@@@@@
AN ATTACHMENT
S/N F9B1-UP
LOW BAR
PART OF 309-9879 LIGHTING GP-ROADING
Type 2
CANNOT BE USED WITH @@@@@308-9371@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-0617 | [2] | CLAMP | |
| 2. | 2G-0988 | [2] | CAP | |
| 3. | 3K-9520 | [3] | GROMMET | |
| 4. | 137-9410 | [2] | CLAMP | |
| 5. | 553-2611 CY | [1] | HARNESS AS-LIGHTING (BAR) | |
| 6. | 250-4330 | [1] | TUBE | |
| 7. | 331-3710 | [2] | BRACKET AS | |
| 8. | 259-9288 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, RH) | |
| 9. | 259-9287 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, LH) | |
| 10. | 130-5300 | [2] | CLIP | |
| 11. | 130-5301 | [2] | CLIP | |
| 12. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 5P-9135 | [1] | GROMMET | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 344-5675 CM | [2] | NUT (M10X1.5-THD) | |
| 17. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 18. | 8T-5001 M | [4] | BOLT (M12X1.75X130-MM) | |
| 19. | 7K-1181 | [1] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63520367
308-9371: MOUNTING GP-LIGHTING
308-9371 MOUNTING GP-LIGHTING -ROADING
S/N F9B1-UP
HIGH BAR
PART OF 309-9881 LIGHTING AR-ROADING
Type 1
AN ATTACHMENT
S/N F9B1-UP
HIGH BAR
PART OF 309-9881 LIGHTING AR-ROADING
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-0617 | [2] | CLAMP | |
| 2. | 2G-0988 | [2] | CAP | |
| 3. | 3K-9520 | [3] | GROMMET | |
| 4. | 137-9410 | [2] | CLAMP | |
| 5. | 236-2335 | [1] | HARNESS AS-FRONT LIGHTING | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 9W-0844 | [10] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (80-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6. | 246-1672 | [1] | TUBE | |
| 7. | 331-3710 | [2] | BRACKET AS | |
| 8. | 259-9288 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, RH) | |
| 9. | 259-9287 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, LH) | |
| 10. | 130-5300 | [2] | CLIP | |
| 11. | 130-5301 | [2] | CLIP | |
| 12. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 5P-9135 | [1] | GROMMET | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 17. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 18. | 8T-5001 M | [4] | BOLT (M12X1.75X130-MM) | |
| 19. | 7K-1181 | [1] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63520368
308-9371: MOUNTING GP-LIGHTING
308-9371 MOUNTING GP-LIGHTING -ROADING
S/N F9B1-UP
HIGH BAR
PART OF 309-9881 LIGHTING AR-ROADING
Type 2
AN ATTACHMENT
S/N F9B1-UP
HIGH BAR
PART OF 309-9881 LIGHTING AR-ROADING
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-0617 | [2] | CLAMP | |
| 2. | 2G-0988 | [2] | CAP | |
| 3. | 3K-9520 | [3] | GROMMET | |
| 4. | 137-9410 | [2] | CLAMP | |
| 5. | 553-2611 CY | [1] | HARNESS AS-LIGHTING (BAR) | |
| 6. | 246-1672 | [1] | TUBE | |
| 7. | 331-3710 | [2] | BRACKET AS | |
| 8. | 259-9288 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, RH) | |
| 9. | 259-9287 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, LH) | |
| 10. | 130-5300 | [2] | CLIP | |
| 11. | 130-5301 | [2] | CLIP | |
| 12. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 5P-9135 | [1] | GROMMET | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 344-5675 CM | [2] | NUT (M10X1.5-THD) | |
| 17. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 18. | 8T-5001 M | [4] | BOLT (M12X1.75X130-MM) | |
| 19. | 7K-1181 | [1] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63520369
331-4700: PANEL GP-CIRCUIT BREAKER
331-4700 PANEL GP-CIRCUIT BREAKER
S/N F9B1-UP
BOX
PART OF 355-5050, 355-5051 BATTERY & WIRING GP
AN ATTACHMENT
S/N F9B1-UP
BOX
PART OF 355-5050, 355-5051 BATTERY & WIRING GP
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(MAIN) | |
| 1A. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(LOAD) | |
| (EACH CIRCUIT BREAKER INCLUDES) | ||||
| 1H-3244 | [2] | LOCKWASHER | ||
| 4E-5724 | [2] | WASHER (7X12X1-MM THK) | ||
| 8T-0122 | [2] | NUT-FULL (1/4-28-THD) | ||
| 2. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN POWER RELAY) | |
| 3. | 309-5487 | [1] | PLATE AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 130-5300 | [1] | CLIP | ||
| 4. | 314-7487 | [1] | STRAP | |
| 5. | 113-8373 | [4] | SCREW-BUTTON HEAD (10-32X0.75-IN) | |
| 6. | 139-4724 | [1] | CIRCUIT BREAKER AS (30-AMPERE) | |
| 6V-8378 | [2] | NUT (10-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 7. | 147-1773 | [1] | CIRCUIT BREAKER AS (30-AMPERE) | |
| 6V-8378 | [2] | NUT (10-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 8. | 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | |
| 9. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 10. | 9B-7233 | [4] | LOCKWASHER | |
| 11. | 9X-6016 | [4] | SCREW-HEX SOCKET (8-32X0.875-IN) | |
| 12. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 13. | 4B-4277 | [2] | WASHER (8.8X17.5X1.6-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
MOTOR GP
Troubleshooting
Disassembly and Assembly
Secondary Steering Pump and Motor - Disassemble
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Secondary Steering Pump and Motor - Assemble
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Secondary Steering Pump and Motor - Remove
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Secondary Steering Pump and Motor - Install
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Service Magazine
