ELECTRICAL AND STARTING SYSTEM
LIGHTING GPSENSOR GP
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
#SEBP63520450
319-5110: WIRING GP-REAR LIGHTING
319-5110 WIRING GP-REAR LIGHTING
S/N F9B1-UP
RADIATOR
PART OF 331-6793 LIGHTING AR-ROADING
Type 2
AN ATTACHMENT
S/N F9B1-UP
RADIATOR
PART OF 331-6793 LIGHTING AR-ROADING
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [12] | STRAP-CABLE | |
| 3. | 169-5414 | [1] | CLIP | |
| 4. | 130-5300 | [4] | CLIP | |
| 5. | 204-2281 | [4] | STRAP-CABLE | |
| 6. | 204-8000 | [4] | MOUNTING-CABLE TIE | |
| 7. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 8. | 259-8450 | [2] | LAMP GP-SIGNAL (24-VOLT)(STOP, TAIL LIGHTS) | |
| (EACH INCLUDES) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9. | 379-3416 C | [2] | LAMP GP-SIGNAL (24-VOLT)(BACKUP) | |
| (EACH INCLUDES) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 526-0598 Y | [1] | HARNESS AS-REAR LIGHTING | |
| 11. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 12. | 132-5789 | [1] | CLIP (LADDER) | |
| 13. | 344-5673 M | [12] | NUT (M6X1-THD) | |
| 14. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 15. | 8S-0948 | [2] | CLIP (SLOT) | |
| 16. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 19. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 20. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 21. | 9X-8256 | [12] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63520451
319-5140: WIRING GP-REAR LIGHTING
319-5140 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N F9B1-UP
FOLD DOWN, RADIATOR
PART OF 309-9881 LIGHTING AR-ROADING, 309-9879 LIGHTING GP-ROADING
Type 1
AN ATTACHMENT
S/N F9B1-UP
FOLD DOWN, RADIATOR
PART OF 309-9881 LIGHTING AR-ROADING, 309-9879 LIGHTING GP-ROADING
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [22] | STRAP-CABLE | |
| 3. | 116-0118 | [1] | CLIP | |
| 4. | 204-2281 | [4] | STRAP-CABLE | |
| 5. | 204-8000 | [4] | MOUNTING-CABLE TIE | |
| 6. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 7. | 252-7165 | [2] | LAMP GP-SIGNAL (24-VOLT)(STOP, TAIL, TURN) | |
| (EACH INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 261-1502 Y | [2] | LAMP GP (24-VOLT)(BACKUP) | |
| 9. | 319-5147 | [1] | HARNESS AS-LIGHTING (RH) | |
| 10. | 319-5148 | [1] | HARNESS AS-LIGHTING (LH) | |
| (EACH HARNESS AS INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(7-CM) | |||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 232-0895 E | CONDUIT-FLEXIBLE (9.6-MM ID)(138-CM) | |||
| 11. | 348-3640 | [1] | HARNESS AS-REAR LIGHTING | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 210-8958 E | TUBE-HEAT SHRINK (24-MM DIA)(10-CM) | |||
| 232-0897 E | CONDUIT-FLEXIBLE (16.2-MM ID)(34-CM) | |||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 12. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 13. | 130-5300 | [4] | CLIP | |
| 14. | 132-5789 | [1] | CLIP (LADDER) | |
| 15. | 5C-2890 M | [12] | NUT (M6X1-THD) | |
| 16. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 17. | 8M-2770 | [4] | CLIP (LOOP) | |
| 18. | 8S-0948 | [2] | CLIP (SLOT) | |
| 19. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 21. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 22. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 23. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 24. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 25. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63520452
319-5140: WIRING GP-REAR LIGHTING
319-5140 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N F9B1-UP
FOLD DOWN, RADIATOR
PART OF 309-9881 LIGHTING AR-ROADING, 309-9879 LIGHTING GP-ROADING
Type 2
AN ATTACHMENT
S/N F9B1-UP
FOLD DOWN, RADIATOR
PART OF 309-9881 LIGHTING AR-ROADING, 309-9879 LIGHTING GP-ROADING
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [22] | STRAP-CABLE | |
| 3. | 116-0118 | [1] | CLIP | |
| 4. | 204-2281 | [4] | STRAP-CABLE | |
| 5. | 204-8000 | [4] | MOUNTING-CABLE TIE | |
| 6. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 7. | 395-2113 C | [2] | LAMP GP-SIGNAL (24-VOLT, LED)(STOP, TAIL, TURN) | |
| (EACH INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8. | 379-3416 C | [2] | LAMP GP-SIGNAL (24-VOLT)(BACKUP) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9. | 319-5147 | [1] | HARNESS AS-LIGHTING (RH) | |
| 10. | 319-5148 | [1] | HARNESS AS-LIGHTING (LH) | |
| (EACH HARNESS AS INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(7-CM) | |||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 232-0895 E | CONDUIT-FLEXIBLE (9.6-MM ID)(138-CM) | |||
| 11. | 348-3640 | [1] | HARNESS AS-REAR LIGHTING | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 210-8958 E | TUBE-HEAT SHRINK (24-MM DIA)(10-CM) | |||
| 232-0897 E | CONDUIT-FLEXIBLE (16.2-MM ID)(34-CM) | |||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 12. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 13. | 130-5300 | [4] | CLIP | |
| 14. | 132-5789 | [1] | CLIP (LADDER) | |
| 15. | 5C-2890 M | [12] | NUT (M6X1-THD) | |
| 16. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 17. | 8M-2770 | [4] | CLIP (LOOP) | |
| 18. | 8S-0948 | [2] | CLIP (SLOT) | |
| 19. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 21. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 22. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 23. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 24. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 25. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63520453
319-5140: WIRING GP-REAR LIGHTING
319-5140 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N F9B1-UP
FOLD DOWN, RADIATOR
PART OF 309-9881 LIGHTING AR-ROADING, 309-9879 LIGHTING GP-ROADING
Type 3
AN ATTACHMENT
S/N F9B1-UP
FOLD DOWN, RADIATOR
PART OF 309-9881 LIGHTING AR-ROADING, 309-9879 LIGHTING GP-ROADING
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [22] | STRAP-CABLE | |
| 3. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 4. | 204-2281 | [4] | STRAP-CABLE | |
| 5. | 204-8000 | [4] | MOUNTING-CABLE TIE | |
| 6. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M EACH) | |||
| 7. | 319-5147 | [1] | HARNESS AS-LIGHTING (RH) | |
| 8. | 319-5148 | [1] | HARNESS AS-LIGHTING (LH) | |
| (EACH HARNESS AS INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(7-CM) | |||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 232-0895 E | CONDUIT-FLEXIBLE (9.6-MM ID)(138-CM) | |||
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 368-2370 B | TAPE | |||
| 9. | 526-0598 CY | [1] | HARNESS AS-REAR LIGHTING | |
| 10. | 379-3416 Y | [2] | LAMP GP-SIGNAL (24-VOLT)(REVERSE) | |
| 11. | 395-2113 | [2] | LAMP GP-SIGNAL (24-VOLT, LED)(STOP, TAIL, TURN) | |
| (EACH INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 12. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 13. | 130-5300 | [4] | CLIP | |
| 14. | 132-5789 | [1] | CLIP (LADDER) | |
| 15. | 8M-2770 | [4] | CLIP (LOOP) | |
| 16. | 8S-0948 | [2] | CLIP (SLOT) | |
| 17. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 19. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 20. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 21. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 22. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 169-5414 C | [1] | CLIP | |
| 24. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 25. | 344-5673 CM | [12] | NUT (M6X1-THD) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63520454
308-9345: WIRING GP-SENSOR
308-9345 WIRING GP-SENSOR -FRONT-FRONT, ALL WHEEL DRIVE
S/N F9B1-186
PART OF 381-8796 COMMON AR
S/N F9B1-186
PART OF 381-8796 COMMON AR
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 C | [31] | STRAP-CABLE | |
| 2. | 8T-8737 C | [6] | PLUG-SEAL | |
| 3. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR | ||
| 4. | 308-9361 | [1] | HARNESS AS-FRONT | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE ASSEMBLY & WEDGE) | ||||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 8T-8730 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [18] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG ASSEMBLY, WEDGE & INTERFACE SEAL) | ||||
| 5. | 345-1697 C | [1] | GUARD AS (ALL WHEEL DRIVE, RH) | |
| 7T-1099 | [1] | LINK | ||
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 130-5300 | [1] | CLIP | ||
| 6. | 345-1698 C | [1] | GUARD AS (ALL WHEEL DRIVE, LH) | |
| 7T-1099 | [1] | LINK | ||
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 130-5300 | [1] | CLIP | ||
| 7. | 345-1699 C | [2] | PLATE | |
| 8. | 348-3645 | [1] | HARNESS AS-PUMP | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 180-9340 | [23] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG ASSEMBLY, WEDGE & INTERFACE SEAL) | ||||
| 9. | 351-8440 C | [1] | HARNESS AS-SENSOR (MOTOR SPEED, LH) | |
| 6V-9169 | [1] | NUT (13/16-16-THD) | ||
| 6V-8731 | [1] | UNION | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE ASSEMBLY & WEDGE) | ||||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 328-9097 | [1] | COUPLING AS-PERMANENT | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG ASSEMBLY, WEDGE & INTERFACE SEAL) | ||||
| 165-0017 E | HOSE (198-CM) | |||
| 10. | 351-8441 C | [1] | HARNESS AS-SENSOR (MOTOR SPEED, RH) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE ASSEMBLY & WEDGE) | ||||
| 165-0017 E | HOSE (205-CM) | |||
| 6V-8731 | [1] | UNION | ||
| 6V-9169 | [1] | NUT (13/16-16-THD) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 328-9097 | [1] | COUPLING AS-PERMANENT | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG ASSEMBLY, WEDGE & INTERFACE SEAL) | ||||
| 11. | 130-5300 | [4] | CLIP | |
| 12. | 132-5789 C | [1] | CLIP (LADDER) | |
| 13. | 155-2267 C | [2] | PLUG AS-CONNECTOR (3-PIN) | |
| 14. | 238-0251 CM | [4] | SCREW-BUTTON HEAD (M10X1.5X25-MM) | |
| 15. | 3K-0360 | [1] | SEAL-O-RING | |
| 16. | 4K-8864 | [1] | CLIP (LOOP) | |
| 17. | 4P-7428 | [1] | CLIP (LADDER) | |
| 18. | 4P-7581 | [2] | CLIP (LADDER) | |
| 19. | 6D-4244 C | [2] | CLIP (LOOP) | |
| 20. | 6V-1228 C | [2] | CLIP | |
| 21. | 8C-8585 CM | [4] | SCREW-BUTTON HEAD (M10X1.5X20-MM) | |
| 22. | 8T-4121 | [17] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4133 CM | [1] | NUT (M10X1.5-THD) | |
| 24. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 25. | 9M-8406 C | [2] | CLIP (LOOP) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63520455
308-9345: WIRING GP-SENSOR
308-9345 WIRING GP-SENSOR -FRONT-FRONT, ALL WHEEL DRIVE
S/N F9B187-UP
PART OF 381-8796 COMMON AR
S/N F9B187-UP
PART OF 381-8796 COMMON AR
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [22] | STRAP-CABLE | |
| 2. | 8T-8737 | [6] | PLUG-SEAL | |
| 3. | 308-9361 | [1] | HARNESS AS-FRONT | |
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 8T-8730 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [18] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 4. | 345-1697 | [1] | GUARD AS (ALL WHEEL DRIVE, RH) | |
| 5. | 345-1698 | [1] | GUARD AS (ALL WHEEL DRIVE, LH) | |
| 6. | 345-1699 | [2] | PLATE | |
| 7. | 527-2749 CY | [1] | HARNESS AS-SENSOR (LH)(MOTOR SPEED) | |
| 8. | 527-2750 CY | [1] | HARNESS AS-SENSOR (RH)(MOTOR SPEED) | |
| 9. | 130-5300 | [2] | CLIP | |
| 10. | 132-5789 | [1] | CLIP (LADDER) | |
| 11. | 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | |
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 12. | 238-0251 M | [4] | SCREW-BUTTON HEAD (M10X1.5X25-MM) | |
| 13. | 4K-8864 | [1] | CLIP (LOOP) | |
| 14. | 4P-7581 | [1] | CLIP (LADDER) | |
| 15. | 6D-4244 | [2] | CLIP (LOOP) | |
| 17. | 8C-8585 M | [4] | SCREW-BUTTON HEAD (M10X1.5X20-MM) | |
| 18. | 8T-4121 | [17] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 20. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 21. | 9M-8406 | [2] | CLIP (LOOP) | |
| 22. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63520456
319-5195: WIRING GP-SENSOR
319-5195 WIRING GP-SENSOR
S/N F9B1-UP
TRANSMISSION BYPASS
PART OF 339-5517 COLD WEATHER AR
AN ATTACHMENT
S/N F9B1-UP
TRANSMISSION BYPASS
PART OF 339-5517 COLD WEATHER AR
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 463-8243 | [1] | SENSOR GP-PRESSURE (BYPASS, COLD WEATHER) | |
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE(S) & INTERFACE SEAL) | ||||
| 194-5226 | [3] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [3] | WIRE AS (14-GA) | ||
| 3. | 148-8309 | [1] | ADAPTER AS | |
| 2P-8421 | [1] | ADAPTER-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 4. | 3J-1907 | [1] | SEAL-O-RING | |
#SEBP63520457
346-8247: WIRING GP-SENSOR
346-8247 WIRING GP-SENSOR
S/N MME1-UP
PART OF 382-4673, 395-0360 ENGINE AR-COMPLETE
FOR USE WITH LHS ENGINE MOUNTED WITH PRIMARY FILTER MOUNTED ABOVE THE SECONDARY
CANNOT BE USED WITH REMOTE MOUNTED PRIMARY AND SECONDARY FUEL FILTERS
S/N MME1-UP
PART OF 382-4673, 395-0360 ENGINE AR-COMPLETE
FOR USE WITH LHS ENGINE MOUNTED WITH PRIMARY FILTER MOUNTED ABOVE THE SECONDARY
CANNOT BE USED WITH REMOTE MOUNTED PRIMARY AND SECONDARY FUEL FILTERS
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 290-5562 | [2] | MOUNT (DUAL SWIVEL) | |
| 3. | 367-2379 | [1] | HARNESS AS-SENSOR | |
| 3S-2093 | [3] | STRAP-CABLE | ||
| 349-6062 | [1] | HARNESS AS-SENSOR | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 346-5904 | [1] | HARNESS AS-SENSOR | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [9] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 E | TAPE-ELECTRICAL (25-CM) | |||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 238-8245 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 281-8801 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 281-8804 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 289-5150 E | SLEEVE (26-CM) | |||
| 317-1204 E | SLEEVE (60-CM) | |||
| [2] | BRACKET AS | |||
| (EACH INCLUDES) | ||||
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 4. | 132-5789 | [1] | CLIP (LADDER) | |
| 5. | 4P-7581 | [1] | CLIP (LADDER) | |
| 6. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 7. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 8. | 6V-8084 M | [1] | BOLT (M10X1.5X12-MM) | |
| 9. | 6V-8490 M | [2] | BOLT (M6X1X25-MM) | |
| 10. | 7G-1239 | [1] | SPACER (10.5X19X4.5-MM THK) | |
| 11. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 13. | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63520458
346-8247: WIRING GP-SENSOR
346-8247 WIRING GP-SENSOR
S/N MME11241-UP
PART OF 395-0360 ENGINE AR-COMPLETE
FOR USE WITH LHS ENGINE MOUNTED WITH PRIMARY FILTER MOUNTED ABOVE THE SECONDARY
CANNOT BE USED WITH REMOTE MOUNTED PRIMARY AND SECONDARY FUEL FILTERS
S/N MME11241-UP
PART OF 395-0360 ENGINE AR-COMPLETE
FOR USE WITH LHS ENGINE MOUNTED WITH PRIMARY FILTER MOUNTED ABOVE THE SECONDARY
CANNOT BE USED WITH REMOTE MOUNTED PRIMARY AND SECONDARY FUEL FILTERS
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 290-5562 | [2] | MOUNT (DUAL SWIVEL) | |
| 3. | 349-6062 CY | [1] | HARNESS AS-SENSOR | |
| 4. | 132-5789 | [1] | CLIP (LADDER) | |
| 5. | 4P-7581 | [1] | CLIP (LADDER) | |
| 6. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 7. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 8. | 6V-8084 M | [1] | BOLT (M10X1.5X12-MM) | |
| 9. | 6V-8490 M | [2] | BOLT (M6X1X25-MM) | |
| 10. | 7G-1239 | [1] | SPACER (10.5X19X4.5-MM THK) | |
| 11. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 13. | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63520459
350-1350: WIRING GP-SENSOR
350-1350 WIRING GP-SENSOR
S/N F9B1-UP
GERMAN HOMOLOGATION
PART OF 353-3315, 377-9501 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
S/N F9B1-UP
GERMAN HOMOLOGATION
PART OF 353-3315, 377-9501 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [1] | CAP-DUST | |
| 2. | 344-7391 | [1] | SENSOR-PRESSURE (EJECTOR)(STEERING) | |
| 3. | 360-3658 | [1] | TEE AS | |
| 360-3657 | [1] | ADAPTER | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 5. | 3J-1907 | [1] | SEAL-O-RING |
Information:
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
Operation and Maintenance Manual
Battery Disconnect Switch
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Service Magazine
Improved Head Lamp Group is Now Used on Certain Motor Graders {1429, 1430}
Improved Head Lamp Group is Now Used on Certain Motor Graders {1429, 1430}
Improved Head Lamp Group is Now Used on Certain Motor Graders {1429, 1430}
Bracket Mounting for the Registration Plate Has Been Improved on Certain 120M, 12M, 140M, and 160M Series 2 Motor Graders {1429}
Bracket Mounting for the Registration Plate Has Been Improved on Certain 120M, 12M, 140M, and 160M Series 2 Motor Graders {1429}
Bracket Mounting for the Registration Plate Has Been Improved on Certain 120M, 12M, 140M, and 160M Series 2 Motor Graders {1429}
