447-2229 DISPLAY GP-CAMERA S/N F9B1-UP PART OF 391-2914 CAMERA AR AN ATTACHMENT 12M 2 MOTOR GRADER

447-2229: DISPLAY GP-CAMERA

447-2229 DISPLAY GP-CAMERA
S/N F9B1-UP
PART OF 391-2914 CAMERA AR
AN ATTACHMENT

Parts for your 12M 2 MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	251-8248	[1]	CABLE AS-COMMUNICATION
2.	333-8153	[1]	CONNECTION AS
3.	464-6047	[1]	MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)
	8T-8729	[5]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8737	[1]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	344-3847	[1]	CABLE AS (DISPLAY)
4.	3S-2093	[11]	STRAP-CABLE
5.	8T-2226 M	[4]	SCREW-MACHINE (M5X0.8X10-MM)
6.	9X-8267	[4]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

451-6020: DISPLAY GP-CAMERA

DISPLAY GP-CAMERA

451-6020 DISPLAY GP-CAMERA
S/N F9B1-UP
PART OF 435-6258 CAMERA AR
AN ATTACHMENT

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(CAMERA)
2.	3S-2093	[10]	STRAP-CABLE
3.	251-8248	[1]	CABLE AS-COMMUNICATION
4.	268-8643	[1]	CABLE AS (6-M)
5.	333-8153	[2]	CONNECTION AS
6.	438-3109	[1]	HARNESS AS-PANEL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[9]	PLUG-SEAL
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	100-5041	[4]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[14]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[13]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	329-3734 B		TAPE-ELECTRICAL
7.	440-4779	[1]	MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 20-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	440-4780	[1]	CABLE AS
8.	441-8382	[1]	PLATE AS
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
9.	8T-2226 M	[4]	SCREW-MACHINE (M5X0.8X10-MM)
10.	9X-2043 M	[1]	SCREW-TRUSS HEAD (M6X1X14-MM)
11.	9X-8267	[4]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

294-1033: DOOR GP-CAB

DOOR GP-CAB

294-1033 DOOR GP-CAB -LH
S/N F9B1-UP
PART OF 310-2030 CAB AR
FIELD REPLACEMENT ORDER @@@@@357-9200@@@@@
ALSO AN ATTACHMENT

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-7636	[2]	PIN AS-SPRING
2.	4E-8722	[5]	NUT (RETAINER)
3.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
4.	252-1862 J	[1]	HANDLE AS-PULL
5.	252-1863	[1]	GASKET
6.	261-1731	[1]	BOOT
7.	361-0421	[1]	COVER
8.	269-2890	[1]	CLEVIS
9.	269-2892	[1]	PIN
10.	269-2893	[1]	CLIP
11.	272-1623	[1]	BELLCRANK AS
12.	285-3692	[1]	SPACER-SPECIAL
13.	352-1643	[1]	DOOR AS-CAB (LH)
14.	295-1114 Y	[1]	WIPER GP-WINDOW (DOOR, LH)
15.	295-1200	[2]	HINGE (LH)
16.	295-5648	[1]	PLATE
17.	295-5665	[1]	BRACKET AS
18.	295-6393	[1]	COVER (LH)
19.	328-4984	[1]	LATCH AS-DOOR (LH)
20.	295-6400	[1]	LINKAGE AS (LH)
21.	295-6406	[1]	LATCH AS (LH)
22.	295-6652	[1]	GLASS (DOOR, LH)
23.	296-2991	[1]	BRACKET
24.	296-4040	[1]	STRIKER AS
25.	296-4109	[1]	COVER
26.	296-4924	[1]	HARNESS AS-WINDOW WIPER
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[1]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (95-CM)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
27.	297-4169	[1]	GROMMET
28.	299-1021	[1]	LEVER GP-CAB DOOR
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL (DOOR RELEASE)
29.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
30.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
31.	109-5008	[1]	BUMPER-CONICAL
32.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
33.	5C-7261 M	[1]	NUT (M8X1.25-THD)
34.	9X-2125 M	[4]	BOLT-LOCKING (M10X1.5X25-MM)
35.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
36.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
37.	9X-2043 M	[11]	SCREW-TRUSS HEAD (M6X1X14-MM)
38.	9X-2044 M	[6]	SCREW-TRUSS HEAD (M6X1X16-MM)
39.	328-5492 L		SEAL (50-DM)
40.	331-9731 E		SEAL (4-CM)
41.	110-7524	[8]	BUTTON
42.	3S-2093	[3]	STRAP-CABLE
43.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
44.	214-9186	[6]	BUTTON
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	L		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

310-2044: DOOR GP-CAB

DOOR GP-CAB

310-2044 DOOR GP-CAB -HEATED WINDOW, RH
S/N F9B1-UP
PART OF 355-8804 OPTION AR-CAB
Type 1
FIELD REPLACEMENT ORDER @@@@@423-4307@@@@@
OPTIONAL FIELD REPLACEMENT ORDER 500-384-4004 SEAL
AN ATTACHMENT

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	4E-8722	[5]	NUT (RETAINER)
3.	6V-7636	[2]	PIN AS-SPRING
4.	110-7524	[8]	BUTTON
5.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
6.	214-9186	[6]	BUTTON
7.	252-1862 J	[1]	HANDLE AS-PULL
8.	252-1863	[1]	GASKET
9.	261-1731	[1]	BOOT
10.	361-0421	[1]	COVER
11.	269-2890	[1]	CLEVIS
12.	269-2892	[1]	PIN
13.	269-2893	[1]	CLIP
14.	272-1623	[1]	BELLCRANK AS
15.	285-3692	[1]	SPACER-SPECIAL
16.	294-1032	[1]	DOOR AS (RH)
17.	295-1043	[2]	HINGE (RH)
18.	295-1113 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
19.	295-5648	[1]	PLATE
20.	295-5649	[1]	BRACKET
21.	295-5665	[1]	BRACKET AS
22.	295-6390	[1]	COVER
23.	295-6399	[1]	LINKAGE AS (RH)
24.	295-6405	[1]	LATCH AS (RH)
25.	296-4040	[1]	STRIKER AS
26.	297-4169	[1]	GROMMET
27.	299-1020	[1]	LEVER AS
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL (DOOR RELEASE)
28.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
29.	310-2077	[1]	GLASS AS-DOOR
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
30.	328-4985	[1]	LATCH AS-DOOR (RH)
31.	376-3860	[1]	COVER (RH)
32.	331-6321	[1]	SWITCH AS-ROCKER (WINDOW DEFROSTER)
33.	361-2492	[1]	HARNESS AS-WINDOW WIPER (RH)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8737	[2]	PLUG-SEAL
	126-1766	[5]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	144-0195 E		HOSE (112-CM)
	144-1636	[13]	PIN-CONNECTOR (14-GA TO 18-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	297-4169	[2]	GROMMET
34.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
35.	109-5008	[1]	BUMPER-CONICAL
36.	248-2841	[2]	RELAY AS (24-VOLT)(HEATED MIRRORS)
37.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
38.	5C-7261 M	[1]	NUT (M8X1.25-THD)
39.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
40.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
41.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
42.	9S-2437	[2]	SCREW-TAPPING (10-24X19.05-MM)
43.	9X-2043 M	[11]	SCREW-TRUSS HEAD (M6X1X14-MM)
44.	9X-2044 M	[6]	SCREW-TRUSS HEAD (M6X1X16-MM)
45.	9X-2125 M	[4]	BOLT-LOCKING (M10X1.5X25-MM)
46.	331-9731 E		SEAL (4-CM)
47.	328-5492 L		SEAL (50-DM)
48.	6L-7008	[2]	STRAP-CABLE
49.	375-8420	[1]	HARNESS AS-WIRING (HEATED MIRROR, LH)
	5P-6006 D		TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)
	7T-6364	[2]	TERMINAL-BLADE (12-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(33-CM)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	1P-0810 B		TAPE-ELECTRICAL
50.	375-8421	[1]	HARNESS AS-WIRING (HEATED MIRROR, RH)
	5P-6006 D		TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)
	7T-6364	[2]	TERMINAL-BLADE (12-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	1P-0810 B		TAPE-ELECTRICAL
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	L		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

310-2044: DOOR GP-CAB

DOOR GP-CAB

310-2044 DOOR GP-CAB -HEATED WINDOW, RH
S/N F9B1-UP
PART OF 355-8804 OPTION AR-CAB
Type 2
FIELD REPLACEMENT ORDER @@@@@423-4307@@@@@
OPTIONAL FIELD REPLACEMENT ORDER 500-384-4004 SEAL
AN ATTACHMENT

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	172-8591 M	[5]	NUT-CLIP (M6X1-THD)
3.	6V-7636	[2]	PIN AS-SPRING
4.	110-7524	[8]	BUTTON
5.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
6.	214-9186	[6]	BUTTON
7.	252-1862 J	[1]	HANDLE AS-PULL
8.	252-1863	[1]	GASKET
9.	261-1731	[1]	BOOT
10.	361-0421	[1]	COVER
11.	269-2890	[1]	CLEVIS
12.	269-2892	[1]	PIN
13.	269-2893	[1]	CLIP
14.	272-1623	[1]	BELLCRANK AS
15.	285-3692	[1]	SPACER-SPECIAL
16.	294-1032	[1]	DOOR AS (RH)
17.	295-1043	[2]	HINGE (RH)
18.	295-1113 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
19.	295-5648	[1]	PLATE
20.	295-5649	[1]	BRACKET
21.	295-5665	[1]	BRACKET AS
22.	295-6390	[1]	COVER
23.	295-6399	[1]	LINKAGE AS (RH)
24.	295-6405	[1]	LATCH AS (RH)
25.	296-4040	[1]	STRIKER AS
26.	297-4169	[1]	GROMMET
27.	299-1020	[1]	LEVER AS
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL (DOOR RELEASE)
28.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
29.	380-3887 C	[1]	WINDOW GP-DOOR (HEATED)
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
30.	328-4985	[1]	LATCH AS-DOOR (RH)
31.	376-3860	[1]	COVER (RH)
32.	331-6321	[1]	SWITCH AS-ROCKER (WINDOW DEFROSTER)
33.	361-2492	[1]	HARNESS AS-WINDOW WIPER (RH)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (112-CM)
	9X-3401	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[13]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
	329-3734 B		TAPE-ELECTRICAL
34.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
35.	109-5008	[1]	BUMPER-CONICAL
36.	248-2841	[2]	RELAY AS (24-VOLT)(HEATED MIRRORS)
37.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
38.	5C-7261 M	[1]	NUT (M8X1.25-THD)
39.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
40.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
41.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
42.	9S-2437	[2]	SCREW-TAPPING (10-24X19.05-MM)
43.	9X-2043 M	[11]	SCREW-TRUSS HEAD (M6X1X14-MM)
44.	9X-2044 M	[6]	SCREW-TRUSS HEAD (M6X1X16-MM)
45.	9X-2125 M	[4]	BOLT-LOCKING (M10X1.5X25-MM)
46.	331-9731 E		SEAL (4-CM)
47.	328-5492 L		SEAL (50-DM)
48.	391-2051 C	[2]	STRAP-CABLE
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	L		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

310-2056: DOOR GP-CAB

DOOR GP-CAB

310-2056 DOOR GP-CAB -RH
S/N F9B1-UP
PART OF 357-9091 CAB AR, 355-8802 OPTION AR-CAB
FIELD REPLACEMENT ORDER @@@@@357-9199@@@@@
OPTIONAL FIELD REPLACEMENT ORDER 500-384-4004 SEAL
AN ATTACHMENT

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	4E-8722	[5]	NUT (RETAINER)
3.	6V-7636	[2]	PIN AS-SPRING
4.	110-7524	[8]	BUTTON
5.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
6.	214-9186	[6]	BUTTON
7.	252-1862 J	[1]	HANDLE AS-PULL
8.	252-1863	[1]	GASKET
9.	261-1731	[1]	BOOT
10.	361-0421	[1]	COVER
11.	269-2890	[1]	CLEVIS
12.	269-2892	[1]	PIN
13.	269-2893	[1]	CLIP
14.	272-1623	[1]	BELLCRANK AS
15.	285-3692	[1]	SPACER-SPECIAL
16.	294-1032	[1]	DOOR AS (RH)
17.	295-1043	[2]	HINGE (RH)
18.	295-1113 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
19.	295-5648	[1]	PLATE
20.	295-5649	[1]	BRACKET
21.	295-5665	[1]	BRACKET AS
22.	295-6374	[1]	GLASS (DOOR, RH)
23.	295-6390	[1]	COVER
24.	295-6391	[1]	COVER (RH)
25.	295-6399	[1]	LINKAGE AS (RH)
26.	295-6405	[1]	LATCH AS (RH)
27.	296-4040	[1]	STRIKER AS
28.	297-4169	[1]	GROMMET
29.	299-1020	[1]	LEVER AS
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL (DOOR RELEASE)
30.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
31.	328-4985	[1]	LATCH AS-DOOR (RH)
32.	361-2492	[1]	HARNESS AS-WINDOW WIPER (RH)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	7T-0093	[4]	PIN-CONNECTOR (12-GA TO 14-GA)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (112-CM)
	9X-3401	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	297-4169	[2]	GROMMET
33.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
34.	109-5008	[1]	BUMPER-CONICAL
35.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
36.	5C-7261 M	[1]	NUT (M8X1.25-THD)
37.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
38.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
40.	9X-2043 M	[11]	SCREW-TRUSS HEAD (M6X1X14-MM)
41.	9X-2044 M	[6]	SCREW-TRUSS HEAD (M6X1X16-MM)
42.	9X-2125 M	[4]	BOLT-LOCKING (M10X1.5X25-MM)
43.	331-9731 E		SEAL (4-CM)
44.	328-5492 BH	[50]	SEAL (50-DM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	H		ORDER BY THE DECIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

357-9199: DOOR GP-CAB

DOOR GP-CAB

357-9199 DOOR GP-CAB -RH
S/N F9B1-UP
PART OF 381-7048, 381-7049 ROPS GP
AN ATTACHMENT

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-8591 M	[3]	NUT-CLIP (M6X1-THD)
2.	6V-7636	[2]	PIN AS-SPRING
3.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
4.	252-1862 J	[1]	HANDLE AS-PULL
5.	252-1863	[1]	GASKET
6.	261-1731	[1]	BOOT
7.	269-2890	[1]	CLEVIS
8.	269-2892	[1]	PIN
9.	269-2893	[1]	CLIP
10.	272-1623	[1]	BELLCRANK AS
11.	285-3692	[1]	SPACER-SPECIAL
12.	295-6405	[1]	LATCH AS (RH)
13.	507-2767	[1]	STRIKER AS
14.	299-1020	[1]	LEVER AS
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL
	299-1024	[1]	LEVER
	299-1441	[1]	SPRING
	299-1442	[1]	SPRING
15.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
16.	328-4985	[1]	LATCH AS-DOOR (RH)
17.	357-0728	[1]	HARNESS AS-WINDOW WIPER (LH)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (119-CM)
	9X-3401	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
	329-3734 B		TAPE-ELECTRICAL
18.	357-9181	[1]	DOOR AS (RH)
	7Y-9096 M	[2]	SCREW-TRUSS HEAD (M6X1X6-MM)
	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
	308-2903 M	[3]	NUT-WELD (M6X1-THD)
19.	357-9187	[1]	HANDLE AS-PULL
20.	357-9188	[1]	PLATE
21.	357-9190	[1]	BRACKET AS
22.	357-9191	[1]	BUMPER
23.	357-9236	[1]	GLASS (DOOR)
24.	357-9260	[1]	COVER (WIPER-RH)
25.	357-9261	[1]	COVER-LATCH
26.	357-9652 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
27.	357-9755	[1]	LINKAGE
28.	361-0421	[1]	COVER
29.	372-7541	[1]	BRACKET AS
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
30.	376-4793	[1]	HANDLE AS-PULL
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
31.	380-6158	[2]	HINGE AS
			(EACH INCLUDES)
31A.	372-5042	[2]	BUSHING
32.	4E-1384	[1]	BUMPER-CONICAL
33.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
34.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
35.	5C-7261 M	[1]	NUT (M8X1.25-THD)
36.	6D-4244	[2]	CLIP (LOOP)
37.	8T-4000 M	[2]	SCREW-WASHER HEAD (M8X1.25X4.8-MM)
38.	7X-7729	[12]	WASHER (11X25X3-MM THK)
39.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
40.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
41.	9X-2043 M	[13]	SCREW-TRUSS HEAD (M6X1X14-MM)
42.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
43.	9X-2125 M	[10]	BOLT-LOCKING (M10X1.5X25-MM)
44.	331-9731 E		SEAL (4-CM)
45.	353-7114 E		SEAL (440-CM)
46.	367-2761 E		SEAL (500-CM)
47.	108-5471	[1]	CLEVIS
48.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
49.	6V-8185	[1]	NUT (1/4-20-THD)
50.	3S-2093	[1]	STRAP-CABLE
51.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
52.	242-5206	[4]	SPACER (6.4X12.5X0.76-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

357-9200: DOOR GP-CAB

DOOR GP-CAB

357-9200 DOOR GP-CAB -LH
S/N F9B1-UP
PART OF 381-7048, 381-7049, 381-7050 ROPS GP
AN ATTACHMENT

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-8591 M	[3]	NUT-CLIP (M6X1-THD)
2.	6V-7636	[2]	PIN AS-SPRING
3.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
4.	252-1862 J	[1]	HANDLE AS-PULL
5.	252-1863	[1]	GASKET
6.	261-1731	[1]	BOOT
7.	269-2890	[1]	CLEVIS
8.	269-2892	[1]	PIN
9.	269-2893	[1]	CLIP
10.	272-1623	[1]	BELLCRANK AS
11.	285-3692	[1]	SPACER-SPECIAL
12.	295-6406	[1]	LATCH AS (LH)
13.	507-2767	[1]	STRIKER AS
14.	299-1021 Y	[1]	LEVER GP-CAB DOOR
15.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
16.	328-4984	[1]	LATCH AS-DOOR (LH)
17.	357-0728	[1]	HARNESS AS-WINDOW WIPER (LH)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (134-CM)
	9X-3401	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
	329-3734 B		TAPE-ELECTRICAL
18.	357-9182	[1]	DOOR AS (LH)
	308-2903 M	[3]	NUT-WELD (M6X1-THD)
	7Y-9096 M	[2]	SCREW-TRUSS HEAD (M6X1X6-MM)
	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
19.	357-9187	[1]	HANDLE AS-PULL
20.	357-9188	[1]	PLATE
21.	357-9190	[1]	BRACKET AS
22.	357-9191	[1]	BUMPER
23.	357-9236	[1]	GLASS (DOOR)
24.	357-9257	[1]	COVER (WIPER-LH)
25.	357-9258	[1]	COVER-LATCH
26.	357-9653 Y	[1]	WIPER GP-WINDOW (DOOR, LH)
27.	357-9755	[1]	LINKAGE
28.	361-0421	[1]	COVER
29.	372-7541	[1]	BRACKET AS
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
30.	376-4794	[1]	HANDLE AS-PULL
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
31.	380-6158	[2]	HINGE AS
			(EACH INCLUDES)
31A.	372-5042	[2]	BUSHING
32.	4E-1384	[1]	BUMPER-CONICAL
33.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
34.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
35.	5C-7261 M	[1]	NUT (M8X1.25-THD)
36.	6D-4244	[2]	CLIP (LOOP)
37.	8T-4000 M	[2]	SCREW-WASHER HEAD (M8X1.25X4.8-MM)
38.	7X-7729	[12]	WASHER (11X25X3-MM THK)
39.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
40.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
41.	9X-2043 M	[13]	SCREW-TRUSS HEAD (M6X1X14-MM)
42.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
43.	9X-2125 M	[10]	BOLT-LOCKING (M10X1.5X25-MM)
44.	331-9731 E		SEAL (4-CM)
45.	353-7114 E		SEAL (440-CM)
46.	367-2761 E		SEAL (500-CM)
47.	108-5471	[1]	CLEVIS
48.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
49.	6V-8185	[1]	NUT (1/4-20-THD)
50.	3S-2093	[1]	STRAP-CABLE
51.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
52.	242-5206	[4]	SPACER (6.4X12.5X0.76-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

363-6038: DOOR GP-CAB

DOOR GP-CAB

363-6038 DOOR GP-CAB -RH
S/N F9B1-UP
PART OF 381-7050 ROPS GP
FIELD REPLACEMENT ORDER @@@@@423-4307@@@@@
AN ATTACHMENT

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	4E-1384	[1]	BUMPER-CONICAL
3.	4E-8722	[3]	NUT (RETAINER)
4.	6V-7636	[2]	PIN AS-SPRING
5.	108-5471	[1]	CLEVIS
6.	252-1862 J	[1]	HANDLE AS-PULL
7.	252-1863	[1]	GASKET
8.	261-1731	[1]	BOOT
9.	269-2890	[1]	CLEVIS
10.	269-2892	[1]	PIN
11.	269-2893	[1]	CLIP
12.	272-1623	[1]	BELLCRANK AS
13.	285-3692	[1]	SPACER-SPECIAL
14.	295-6405	[1]	LATCH AS (RH)
15.	507-2767	[1]	STRIKER AS
16.	299-1020	[1]	LEVER AS
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL (DOOR RELEASE)
	299-1024	[1]	LEVER
	299-1441	[1]	SPRING
	299-1442	[1]	SPRING
17.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
18.	328-4985	[1]	LATCH AS-DOOR (RH)
19.	331-6321	[1]	SWITCH AS-ROCKER (WINDOW DEFROSTER)
20.	357-9181	[1]	DOOR AS (RH)
	308-2903 M	[3]	NUT-WELD (M6X1-THD)
	7Y-9096 M	[2]	SCREW-TRUSS HEAD (M6X1X6-MM)
	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
21.	357-9187	[1]	HANDLE AS-PULL
22.	357-9188	[1]	PLATE
23.	357-9190	[1]	BRACKET AS
24.	357-9191	[1]	BUMPER
25.	357-9260	[1]	COVER (WIPER-RH)
26.	357-9261	[1]	COVER-LATCH
27.	357-9652 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
28.	357-9755	[1]	LINKAGE
29.	361-0421	[1]	COVER
30.	365-5588	[1]	HARNESS AS-CHASSIS
	329-3734 B		TAPE-ELECTRICAL
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8737	[2]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (119-CM)
	9X-3401	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[13]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	297-4169	[2]	GROMMET
31.	372-7541	[1]	BRACKET AS
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
32.	376-4793	[1]	HANDLE AS-PULL
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
33.	380-3889	[1]	GLASS AS-DOOR (RH)
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
34.	380-6158	[2]	HINGE AS
			(EACH INCLUDES)
34A.	372-5042	[2]	BUSHING
35.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
36.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
37.	248-2841	[2]	RELAY AS (24-VOLT)
38.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
39.	5C-7261 M	[1]	NUT (M8X1.25-THD)
40.	6D-4244	[2]	CLIP (LOOP)
41.	6L-7008	[2]	STRAP-CABLE
42.	6V-8185	[1]	NUT (1/4-20-THD)
43.	8T-4000 M	[2]	SCREW-WASHER HEAD (M8X1.25X4.8-MM)
44.	7X-7729	[12]	WASHER (11X25X3-MM THK)
45.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
46.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
47.	9S-2437	[2]	SCREW-TAPPING (10-24X19.05-MM)
48.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
49.	9X-2043 M	[13]	SCREW-TRUSS HEAD (M6X1X14-MM)
50.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
51.	9X-2125 M	[10]	BOLT-LOCKING (M10X1.5X25-MM)
52.	331-9731 E		SEAL (4-CM)
53.	353-7114 E		SEAL (440-CM)
54.	367-2761 E		SEAL (500-CM)
55.	7X-0605	[1]	WASHER-HARD (13X28X1.6-MM THK)
56.	242-5206	[4]	SPACER (6.4X12.5X0.76-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

423-4307: DOOR GP-CAB

DOOR GP-CAB

423-4307 DOOR GP-CAB -RH
S/N F9B1-UP
FIELD REPLACEMENT FOR @@@@@310-2044@@@@@, @@@@@363-6038@@@@@

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	4E-1384	[1]	BUMPER-CONICAL
3.	172-8591 M	[3]	NUT-CLIP (M6X1-THD)
4.	6V-7636	[2]	PIN AS-SPRING
5.	108-5471	[1]	CLEVIS
6.	252-1862 J	[1]	HANDLE AS-PULL
7.	252-1863	[1]	GASKET
8.	261-1731	[1]	BOOT
9.	269-2890	[1]	CLEVIS
10.	269-2892	[1]	PIN
11.	269-2893	[1]	CLIP
12.	272-1623	[1]	BELLCRANK AS
13.	285-3692	[1]	SPACER-SPECIAL
14.	295-6405	[1]	LATCH AS (RH)
15.	507-2767	[1]	STRIKER AS
16.	299-1020	[1]	LEVER AS
	8T-7971	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	115-9345	[1]	KNOB-CONTROL (DOOR RELEASE)
17.	299-1660	[1]	CABLE AS
	7S-9930	[2]	RING-RETAINING
	159-0052	[2]	PIN-CLEVIS
18.	328-4985	[1]	LATCH AS-DOOR (RH)
19.	357-9181	[1]	DOOR AS (RH)
	7Y-9096 M	[2]	SCREW-TRUSS HEAD (M6X1X6-MM)
	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
	308-2903 M	[3]	NUT-WELD (M6X1-THD)
20.	357-9187	[1]	HANDLE AS-PULL
21.	357-9188	[1]	PLATE
22.	357-9190	[1]	BRACKET AS
23.	357-9191	[2]	BUMPER
24.	357-9260	[1]	COVER (WIPER-RH)
25.	357-9261	[1]	COVER-LATCH
26.	357-9652 Y	[1]	WIPER GP-WINDOW (DOOR, RH)
27.	357-9755	[1]	LINKAGE
28.	361-0421	[1]	COVER
29.	365-5588	[1]	HARNESS AS-CHASSIS
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8737	[2]	PLUG-SEAL
	126-1768	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	144-0195 E		HOSE (119-CM)
	9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	297-4169	[2]	GROMMET
30.	372-7541	[1]	BRACKET AS
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
31.	376-4793	[1]	HANDLE AS-PULL
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
32.	380-3889	[1]	GLASS AS-DOOR (RH)(HEATED)
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL)
33.	380-6158	[2]	HINGE AS
			(EACH INCLUDES)
33A.	372-5042	[2]	BUSHING
34.	381-2326	[2]	RELAY AS (24-VOLT)(MAIN RELAY)
35.	391-2051	[2]	STRAP-CABLE
36.	114-6658	[4]	WASHER (6.5X17X1-MM THK)
37.	184-0983 M	[1]	NUT-HEX FLANGE (M12X1.75-THD)
38.	248-2841	[1]	RELAY AS (24-VOLT)(HEATED MIRRORS)
39.	3E-8020 M	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
40.	5C-7261 M	[1]	NUT (M8X1.25-THD)
41.	6D-4244	[2]	CLIP (LOOP)
42.	6V-8185	[1]	NUT (1/4-20-THD)
43.	8T-4000 M	[2]	SCREW-WASHER HEAD (M8X1.25X4.8-MM)
44.	7X-7729	[12]	WASHER (11X25X3-MM THK)
45.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
46.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
47.	9S-2437	[2]	SCREW-TAPPING (10-24X19.05-MM)
48.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
49.	9X-2043 M	[13]	SCREW-TRUSS HEAD (M6X1X14-MM)
50.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
51.	9X-2125 M	[10]	BOLT-LOCKING (M10X1.5X25-MM)
52.	331-9731 E		SEAL (4-CM)
53.	353-7114 E		SEAL (440-CM)
54.	367-2761 E		SEAL (500-CM)
55.	242-5206	[4]	SPACER (6.4X12.5X0.76-MM THK)
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

OPERATOR STATION

MONITOR GP

Operation and Maintenance Manual

Display and Camera - Clean - If Equipped with Work Area Vision System
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders

Special Instruction

Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}

Installation of Cat® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of Cat^® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}

WAVS Generic Installation Guide for Certain Cat® Products{7347, 7348}
WAVS Generic Installation Guide for Certain Cat^® Products{7347, 7348}

Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat^® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Technical Information Bulletin

Grade Control Offset Value Can Be Incorrect On Certain Motor Graders{7220, 7490, 7620}
Grade Control Offset Value Can Be Incorrect On Certain Motor Graders{7220, 7490, 7620}

Machine Security System Status Indicator Can Illuminate in Bypass Mode on Certain M Series 2 Motor Graders {5701, 7490, 7610, 7620}
Machine Security System Status Indicator Can Illuminate in Bypass Mode on Certain M Series 2 Motor Graders {5701, 7490, 7610, 7620}

Systems Operation

General Information
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Monitoring System
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Display Module
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Input Components
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Output Components
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Warning Operation
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Menu Navigation
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Performance Menu
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Totals Menu
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Settings Menu
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Service Menu
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Cross Slope Menu
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Testing and Adjusting

Self Test
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Module - Replace
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Connector Contact Description
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Module - Flash Program
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Troubleshooting

Indicator Lamp Does Not Illuminate
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System

Indicator Lamp Problem
C9.3 Tier 4 Interim Engines

Action Alarm Does Not Sound
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Action Alarm Is On Continuously
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Indicator Lamp - Test
C9.3 Tier 4 Interim Engines

Indicator Lamp Does Not Illuminate
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

MID 082 - CID 0588 - FMI 09
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

MID 082 - CID 0588 - FMI 14
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

Indicator Lamp Is On Continuously
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

Diagnostic Code List
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

MID 053 - CID 0248 - FMI 09
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

MID 053 - CID 0248 - FMI 14
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

MID 053 - CID 0811 - FMI 09
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Power Supply Circuit
120M Series 2, 120M2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Monitoring System

Indicator Lamp Is On Continuously
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System

Using Messenger to Determine Diagnostic Codes
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Electronic Control System

Indicator Lamp Does Not Illuminate During the Power Up Self Test
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Electronic Control System

Indicator Lamp Is On Continuously
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Electronic Control System

Diagnostic Trouble Codes
Cat^® Grade Control Cross Slope System for Motor Graders

Determining Diagnostic Trouble Codes
Cat^® Grade Control Cross Slope System for Motor Graders

Service Magazine

Improved VisionLinkTM Software Is Now Available for Certain Caterpillar Machines {7601}
2012/06/07

Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04

New Software is Now Used on Certain M Series and M Series II Motor Graders {7490, 7610, 7620}
2013/02/18

New Phone Number for VIMS Support Is Now Available for All Cat® Products Equipped with VIMS {7601}
2015/03/02

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}
A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}