ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP63770530
343-0813: WIRING GP-CHASSIS
343-0813 WIRING GP-CHASSIS -FRONT
S/N RMA102-UP
PART OF 341-3757 MONITOR AR-PAYLOAD
AN ATTACHMENT
S/N RMA102-UP
PART OF 341-3757 MONITOR AR-PAYLOAD
AN ATTACHMENT
For full view, you need register
Parts for your 770G OEM TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [18] | STRAP-CABLE | |
| 2. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(AMBIENT AIR) | |
| 3. | 525-1929 CY | [4] | SENSOR GP-PRESSURE (VARIABLE FREQUENCY)(PAYLOAD) | |
| 5. | 309-4471 | [2] | HARNESS AS-SENSOR | |
| (EACH INCLUDES) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [1] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL) | ||||
| 6. | 322-6549 Y | [2] | LAMP GP-PAYLOAD SIGNAL | |
| 7. | 327-2741 | [1] | BRACKET AS | |
| 9R-2672 M | [1] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 8. | 354-4208 Y | [2] | HARNESS AS-LIGHTING (ENGINE) | |
| 9. | 354-4976 | [2] | PLATE | |
| 10. | 130-5300 | [6] | CLIP | |
| 11. | 2P-1279 | [1] | LOCKNUT (9/16-18-THD) | |
| 12. | 3J-1907 | [4] | SEAL-O-RING | |
| 13. | 7Y-5262 | [4] | U-BOLT | |
| 14. | 8K-1433 | [2] | GROMMET | |
| 15. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 17. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 19. | 224-6193 M | [4] | BOLT-SOCKET HEAD (M3X0.5X12-MM) | |
| 20. | 189-2512 | [1] | PLATE | |
| 21. | 180-9900 | [1] | CAP AS | |
| 5P-7958 | [4] | SLEEVE-CABLE SPLICE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | [1] | LANYARD | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63770531
354-0921: WIRING GP-CHASSIS
For full view, you need register
Parts for your 770G OEM TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [15] | STRAP-CABLE | |
| 2. | 353-7408 Y | [1] | HARNESS AS-CHASSIS (REAR) | |
| 3. | 353-7409 Y | [1] | HARNESS AS-CHASSIS (FRONT) | |
| 4. | 130-5300 | [4] | CLIP | |
| 5. | 4P-7581 | [1] | CLIP (LADDER) | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63770532
362-3102: WIRING GP-CHASSIS
For full view, you need register
Parts for your 770G OEM TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [40] | STRAP-CABLE | |
| 2. | 144-4613 | [2] | ANGLE AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 192-3645 | [1] | BRACKET | |
| 4. | 237-9960 | [2] | CLIP (LADDER) | |
| 5. | 299-5181 | [1] | CLIP | |
| 6. | 326-4515 | [12] | TIE-CABLE | |
| 7. | 359-9171 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 8. | 359-9172 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST OUTLET) | |
| 9. | 362-3103 Y | [1] | HARNESS AS-ENGINE (CHASSIS) | |
| 10. | 362-3105 Y | [1] | HARNESS AS-ENGINE (MAIN FRAME, LH) | |
| 11. | 362-3106 | [1] | PLATE AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 7X-2478 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 12. | 130-5300 | [3] | CLIP | |
| 13. | 132-5789 | [3] | CLIP (LADDER) | |
| 14. | 134-2540 | [2] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 15. | 200-6345 | [1] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 16. | 285-6393 | [1] | CLIP | |
| 17. | [5] | BEAM-SIDE (LH) | ||
| 19. | 344-5675 M | [3] | NUT (M10X1.5-THD) | |
| 20. | 350-4369 | [2] | CLIP (LOOP) | |
| 21. | 4P-7581 | [16] | CLIP (LADDER) | |
| 22. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 23. | 8T-3647 M | [2] | BOLT (M8X1.25X80-MM) | |
| 24. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 26. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 27. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 28. | 8T-4196 M | [3] | BOLT (M10X1.5X35-MM) | |
| 29. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 30. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 8W-0571 | [1] | PLATE | |
| 32. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 33. | 198-4777 | [1] | WASHER-HARD (11X25X10-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63770533
362-3102: WIRING GP-CHASSIS
For full view, you need register
Parts for your 770G OEM TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 C | [41] | STRAP-CABLE | |
| 2. | 144-4613 | [2] | ANGLE AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 192-3645 | [1] | BRACKET | |
| 4. | 326-4515 C | [14] | TIE-CABLE | |
| 5. | 359-9171 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 6. | 359-9172 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST OUTLET) | |
| 7. | 362-3105 Y | [1] | HARNESS AS-ENGINE (MAIN FRAME, LH) | |
| 8. | 454-0795 CY | [1] | HARNESS AS-MONITOR | |
| 9. | 454-3500 CY | [1] | HARNESS AS-ENGINE (CHASSIS) | |
| 10. | 454-9217 C | [1] | PLATE AS | |
| 9R-2613 M | [2] | BOSS-WELD (M10X1.5X25-MM) | ||
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 11. | 130-5300 | [3] | CLIP | |
| 12. | 132-5789 | [3] | CLIP (LADDER) | |
| 13. | 198-4777 | [1] | WASHER-HARD (11X25X10-MM THK) | |
| 14. | 200-6345 | [1] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 15. | 285-6393 | [1] | CLIP | |
| 16. | 285-6395 C | [7] | CLIP (LADDER) | |
| 17. | 344-5675 M | [3] | NUT (M10X1.5-THD) | |
| 18. | 350-4369 | [2] | CLIP (LOOP) | |
| 19. | 352-3969 C | [1] | CLIP (LADDER) | |
| 20. | 381-2621 C | [1] | MOUNTING-CABLE TIE | |
| 21. | 4P-7581 | [14] | CLIP (LADDER) | |
| 22. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 23. | 8T-3647 M | [2] | BOLT (M8X1.25X80-MM) | |
| 24. | 8T-4121 C | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4136 CM | [3] | BOLT (M10X1.5X25-MM) | |
| 26. | 8T-4137 CM | [9] | BOLT (M10X1.5X20-MM) | |
| 27. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 28. | 8T-4196 M | [3] | BOLT (M10X1.5X35-MM) | |
| 29. | 8T-4224 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 30. | 8W-0571 | [1] | PLATE | |
| 31. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63770534
381-9399: WIRING GP-CHASSIS
For full view, you need register
Parts for your 770G OEM TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [92] | STRAP-CABLE | |
| 2. | 9X-4455 | [1] | SWITCH AS-PRESSURE (SECONDARY STEERING) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 144-4613 | [2] | ANGLE AS | |
| 4. | 125-8534 | [1] | PLATE AS | |
| 5. | 148-8313 | [1] | ADAPTER AS | |
| 5P-6944 | [1] | ADAPTER | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6. | 160-2609 | [1] | SWITCH AS-PRESSURE (BRAKE) | |
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 7. | 241-8488 | [3] | PLATE | |
| 8. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN) | |
| 9. | 266-8577 | [1] | SENSOR GP-SPEED | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 320-9398 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 11. | 342-2552 | [1] | HARNESS AS-CHASSIS (REAR, MAIN) | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [38] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [55] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [53] | PLUG-SEAL | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-1343 | [2] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-3401 | [14] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 12. | 344-7391 | [1] | SENSOR-PRESSURE (DIFFERENTIAL LOCK) | |
| 12A. | 344-7391 | [1] | SENSOR-PRESSURE (STEERING) | |
| 13. | 353-4565 Y | [1] | HARNESS AS-SENSOR | |
| 14. | 353-8750 | [1] | PLATE AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 15. | 353-8751 | [1] | PLATE AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 16. | 393-5112 | [1] | SWITCH AS-DIFF PRESSURE (FILTER BYPASS) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (14-CM) | |||
| 17. | 430-8170 Y | [1] | HARNESS AS-CONTROL | |
| 18. | 435-4024 Y | [1] | HARNESS AS-CHASSIS (RH) | |
| 19. | 130-5300 | [16] | CLIP | |
| 20. | 132-5789 | [11] | CLIP (LADDER) | |
| 21. | 133-7810 M | [4] | STUD-TAPERLOCK (M10X1.5X45-MM) | |
| 22. | 204-2281 | [12] | STRAP-CABLE | |
| 23. | 204-8000 | [12] | MOUNTING-CABLE TIE | |
| 24. | 238-5080 | [1] | SEAL-O-RING | |
| 25. | 277-1873 | [1] | CLIP (LADDER) | |
| 26. | 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 27. | 3E-6909 | [2] | CLIP (LOOP) | |
| 28. | 3J-1907 | [4] | SEAL-O-RING | |
| 29. | 3K-0360 | [3] | SEAL-O-RING | |
| 30. | 4P-7428 | [1] | CLIP (LADDER) | |
| 31. | 4P-7581 | [43] | CLIP (LADDER) | |
| 32. | 4P-8134 | [3] | CLIP (LADDER) | |
| 33. | 6K-8180 | [1] | GROMMET | |
| 34. | 8T-4121 | [75] | WASHER-HARD (11X21X2.5-MM THK) | |
| 35. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 36. | 8T-4136 M | [40] | BOLT (M10X1.5X25-MM) | |
| 37. | 8T-4137 M | [18] | BOLT (M10X1.5X20-MM) | |
| 38. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 39. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 40. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 41. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 42. | 217-5449 | [1] | SPACER (11X20X30-MM THK) | |
| 43. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 44. | 303-4649 | [1] | CLIP (LADDER) | |
| 45. | 352-3964 | [1] | CLIP (LADDER) | |
| 46. | 352-3968 | [1] | CLIP (LADDER) | |
| 47. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 48. | 9X-9365 | [2] | BRACKET (LAMP) | |
| 49. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63770535
381-9399: WIRING GP-CHASSIS
For full view, you need register
Parts for your 770G OEM TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [92] | STRAP-CABLE | |
| 2. | 9X-4455 | [1] | SWITCH AS-PRESSURE (SECONDARY STEERING) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 144-4613 | [2] | ANGLE AS | |
| 4. | 125-8534 | [1] | PLATE AS | |
| 5. | 148-8313 | [1] | ADAPTER AS | |
| 5P-6944 | [1] | ADAPTER | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6. | 160-2609 | [1] | SWITCH AS-PRESSURE (BRAKE) | |
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 7. | 241-8488 | [3] | PLATE | |
| 8. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN) | |
| 9. | 266-8577 | [1] | SENSOR GP-SPEED | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 320-9398 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 11. | 342-2552 | [1] | HARNESS AS-CHASSIS (REAR, MAIN) | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [38] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [55] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [53] | PLUG-SEAL | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-1343 | [2] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-3401 | [14] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 12. | 344-7391 | [1] | SENSOR-PRESSURE (DIFFERENTIAL LOCK) | |
| 12A. | 344-7391 | [1] | SENSOR-PRESSURE (STEERING) | |
| 13. | 353-4565 Y | [1] | HARNESS AS-SENSOR (HYDRAULIC FAN) | |
| 14. | 353-8750 | [1] | PLATE AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 15. | 353-8751 | [1] | PLATE AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 16. | 393-5112 | [1] | SWITCH AS-DIFF PRESSURE (FILTER BYPASS) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (14-CM) | |||
| 17. | 430-8170 Y | [1] | HARNESS AS-CONTROL | |
| 18. | 435-4024 Y | [1] | HARNESS AS-CHASSIS (RH) | |
| 19. | 130-5300 | [16] | CLIP | |
| 20. | 132-5789 | [11] | CLIP (LADDER) | |
| 21. | 133-7810 M | [4] | STUD-TAPERLOCK (M10X1.5X45-MM) | |
| 22. | 204-2281 | [12] | STRAP-CABLE | |
| 23. | 204-8000 | [12] | MOUNTING-CABLE TIE | |
| 24. | 238-5080 | [1] | SEAL-O-RING | |
| 25. | 277-1873 | [1] | CLIP (LADDER) | |
| 26. | 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 27. | 3E-6909 | [2] | CLIP (LOOP) | |
| 28. | 3J-1907 | [4] | SEAL-O-RING | |
| 29. | 3K-0360 | [3] | SEAL-O-RING | |
| 30. | 4P-7428 | [1] | CLIP (LADDER) | |
| 31. | 4P-7581 C | [42] | CLIP (LADDER) | |
| 32. | 4P-8134 | [3] | CLIP (LADDER) | |
| 33. | 6K-8180 | [1] | GROMMET | |
| 34. | 8T-4121 C | [76] | WASHER-HARD (11X21X2.5-MM THK) | |
| 35. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 36. | 8T-4136 M | [40] | BOLT (M10X1.5X25-MM) | |
| 37. | 8T-4137 CM | [17] | BOLT (M10X1.5X20-MM) | |
| 38. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 39. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 40. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 41. | 8T-6466 CM | [2] | BOLT (M10X1.5X60-MM) | |
| 42. | 217-5449 | [1] | SPACER (11X20X30-MM THK) | |
| 43. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 44. | 303-4649 | [1] | CLIP (LADDER) | |
| 45. | 352-3964 | [1] | CLIP (LADDER) | |
| 46. | 352-3968 | [1] | CLIP (LADDER) | |
| 47. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 48. | 9X-9365 | [2] | BRACKET (LAMP) | |
| 49. | 344-5675 CM | [3] | NUT (M10X1.5-THD) | |
| 50. | 352-3970 C | [1] | CLIP (LADDER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63770536
381-9399: WIRING GP-CHASSIS
For full view, you need register
Parts for your 770G OEM TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 C | [91] | STRAP-CABLE | |
| 3. | 144-4613 | [2] | ANGLE AS | |
| 4. | 125-8534 | [1] | PLATE AS | |
| 5. | 148-8313 | [1] | ADAPTER AS | |
| 5P-6944 | [1] | ADAPTER | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6. | 562-9445 | [1] | SWITCH AS-PRESSURE (BRAKE) | |
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (28-CM) | |||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 7. | 241-8488 | [3] | PLATE | |
| 8. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(HYDRAULIC OIL) | |
| 9. | 266-8577 | [1] | SENSOR GP-SPEED (TRACTION CONTROL SYSTEM) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 320-9398 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 11. | 342-2552 | [1] | HARNESS AS-CHASSIS (REAR, MAIN) | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [38] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [55] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [53] | PLUG-SEAL | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-1343 | [2] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-3401 | [14] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 12. | 344-7391 | [1] | SENSOR-PRESSURE (DIFFERENTIAL LOCK) | |
| 12A. | 344-7391 | [1] | SENSOR-PRESSURE (STEERING) | |
| 13. | 353-4565 Y | [1] | HARNESS AS-SENSOR (HYDRAULIC FAN) | |
| 14. | 353-8750 | [1] | PLATE AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 15. | 353-8751 | [1] | PLATE AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 16. | 393-5112 | [1] | SWITCH AS-DIFF PRESSURE (FILTER BYPASS) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (14-CM) | |||
| 17. | 430-8170 Y | [1] | HARNESS AS-CONTROL | |
| 18. | 435-4024 Y | [1] | HARNESS AS-CHASSIS (RH) | |
| 19. | 130-5300 | [16] | CLIP | |
| 20. | 132-5789 | [11] | CLIP (LADDER) | |
| 21. | 133-7810 M | [4] | STUD-TAPERLOCK (M10X1.5X45-MM) | |
| 22. | 204-2281 | [12] | STRAP-CABLE | |
| 23. | 204-8000 | [12] | MOUNTING-CABLE TIE | |
| 24. | 238-5080 | [1] | SEAL-O-RING | |
| 25. | 277-1873 | [1] | CLIP (LADDER) | |
| 26. | 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 27. | 3E-6909 | [2] | CLIP (LOOP) | |
| 28. | 3J-1907 | [4] | SEAL-O-RING | |
| 29. | 3K-0360 C | [2] | SEAL-O-RING | |
| 30. | 4P-7428 | [1] | CLIP (LADDER) | |
| 31. | 4P-7581 | [42] | CLIP (LADDER) | |
| 32. | 4P-8134 | [3] | CLIP (LADDER) | |
| 33. | 6K-8180 | [1] | GROMMET | |
| 34. | 8T-4121 C | [75] | WASHER-HARD (11X21X2.5-MM THK) | |
| 36. | 8T-4136 M | [40] | BOLT (M10X1.5X25-MM) | |
| 37. | 8T-4137 M | [17] | BOLT (M10X1.5X20-MM) | |
| 38. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 39. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 40. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 41. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 42. | 302-3908 C | [1] | SPACER (11X20X30-MM THK) | |
| 43. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 44. | 303-4649 | [1] | CLIP (LADDER) | |
| 45. | 352-3964 | [1] | CLIP (LADDER) | |
| 46. | 352-3968 | [1] | CLIP (LADDER) | |
| 47. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 48. | 9X-9365 | [2] | BRACKET (LAMP) | |
| 49. | 344-5675 CM | [9] | NUT (M10X1.5-THD) | |
| 50. | 352-3970 | [1] | CLIP (LADDER) | |
| 51. | 8T-8737 C | [3] | PLUG-SEAL | |
| 52. | 8T-7934 C | [1] | WASHER-HARD (11X21X5-MM THK) | |
| 53. | 102-8803 C | [1] | KIT-RECEPTACLE (3-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 54. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63770537
541-2656: WIRING GP-CHASSIS
541-2656 WIRING GP-CHASSIS -REAR
S/N RMA106-UP
40-TON CAPACITY
PART OF 338-5584 ELECTRICAL AR
S/N RMA106-UP
40-TON CAPACITY
PART OF 338-5584 ELECTRICAL AR
For full view, you need register
Parts for your 770G OEM TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5G-7820 | [1] | MAGNET AS | |
| 2. | 7K-1181 | [37] | STRAP-CABLE | |
| 3. | 127-9323 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(PULSE WIDTH MODULATED) | |
| 5. | 142-1657 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 144-4613 | [1] | ANGLE AS | |
| 7. | 228-4808 | [1] | SWITCH GP-POSITION (BODY UP) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 218-8814 | [1] | SWITCH AS-POSITION (BODY UP) | ||
| 6T-4059 | [1] | GROMMET | ||
| 8. | 235-0084 | [1] | HARNESS AS-SENSOR (FUEL LEVEL) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 450-4949 | [2] | LAMP GP-SIGNAL (24-VOLT, STOP, TAIL) | |
| (EACH INCLUDES) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 247-5643 | [2] | HARNESS AS-REAR (STOP, TAIL, TURN) | |
| (EACH INCLUDES) | ||||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 11. | 294-1873 | [1] | BRACKET AS | |
| 12. | 342-2555 | [1] | HARNESS AS-CONTROL (REAR, LH) | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 8T-8730 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 13. | 383-2704 Y | [1] | HARNESS AS-SWITCH (BODY UP) | |
| 14. | 387-3235 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 15. | 447-7031 | [2] | PLATE | |
| 16. | 130-5300 | [8] | CLIP | |
| 17. | 132-5789 | [1] | CLIP (LADDER) | |
| 18. | 133-7810 M | [1] | STUD-TAPERLOCK (M10X1.5X45-MM) | |
| 19. | 180-3998 M | [1] | STUD (M10X1.5X55-MM) | |
| 20. | 344-5673 M | [6] | NUT (M6X1-THD) | |
| 21. | 344-5675 M | [3] | NUT (M10X1.5-THD) | |
| 22. | 3J-1907 | [1] | SEAL-O-RING | |
| 23. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 24. | 4P-7581 | [7] | CLIP (LADDER) | |
| 25. | 6V-9189 M | [2] | LOCKNUT (M8X1.25-THD) | |
| 26. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
| 27. | 8T-4121 | [17] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4136 M | [14] | BOLT (M10X1.5X25-MM) | |
| 29. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 30. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 32. | 9X-2038 | [6] | WASHER (7X19X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63770538
341-3412: WIRING GP-COMMUNICATION
341-3412 WIRING GP-COMMUNICATION -ANTENNA
S/N RMA1-UP
PART OF 348-4640 INSTALLATION AR-COMMUNICATION, 348-4641, 350-3103, 350-3104 INSTALLATION GP-COMMUNICATION
AN ATTACHMENT
S/N RMA1-UP
PART OF 348-4640 INSTALLATION AR-COMMUNICATION, 348-4641, 350-3103, 350-3104 INSTALLATION GP-COMMUNICATION
AN ATTACHMENT
For full view, you need register
#SEBP63770539
396-3860: WIRING GP-DEF MODULE
396-3860 WIRING GP-DEF MODULE
S/N RMA1-UP
24-VOLT, PUMP ELECTRONIC TANK UNIT
PART OF 370-5665 MODULE GP-DIESEL EXHAUST FLUID
AN ATTACHMENT
S/N RMA1-UP
24-VOLT, PUMP ELECTRONIC TANK UNIT
PART OF 370-5665 MODULE GP-DIESEL EXHAUST FLUID
AN ATTACHMENT
For full view, you need register
