OPERATOR STATION
CONTROL GP-ELECTROHYDRAULICMONITOR GP
CAB GP
AIR CONDITIONER GP
HEATER GP
MIRROR GP
CONTROL GP
OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
#SEBP63780720
416-0165: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 24M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
| (INCLUDES FACEPLATE ASSEMBLY, ESD GROUNDING WRIST STRAP ASM, CONNECTOR REMOVAL TOOL, ROLY SWABS, PRE-MOISTENED TOWELETTES, CABLE TIES, SCREWS-SPARES, GREASE SYRINGE, BIT-TORX, PAPER TOWELS, LABEL & PLASTIC ESD SHEET) | ||||
#SEBP63780721
466-0822: KIT-MONITOR
466-0822 KIT-MONITOR -FLUID MONITORING
S/N B931-UP
FOR USE WITH REHS9814
FIELD INSTALLATION
S/N B931-UP
FOR USE WITH REHS9814
FIELD INSTALLATION
For full view, you need register
Parts for your 24M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 468-1876 Y | [1] | HARNESS AS-SENSOR (FLUID MONITORING) | ||
| 6V-2314 M | [5] | BOLT (M5X0.8X35-MM) | ||
| 453-7931 | [1] | CONFIGURATION-PREMIUM | ||
| 328-3089 | [1] | FLANGE | ||
| 273-4838 | [1] | SEAL | ||
| 440-9802 | [1] | SENSOR AS-LIQUID LEVEL (HYDRAULIC OIL) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 171-0596 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8T-0328 | [5] | WASHER-HARD (5.5X10X1-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63780722
365-7613: KIT-VENT
For full view, you need register
Parts for your 24M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-5059 | [1] | WASHER (15X29.5X2.5-MM THK) | |
| 2. | 341-8342 | [1] | LATCH AS-WINDOW | |
| 8Y-8294 | [1] | LATCH AS-WINDOW | ||
| 332-8658 | [1] | BRACKET | ||
| 335-2228 | [1] | PIN-GROOVED | ||
| 3. | 376-9207 | [1] | VENT AS | |
| 4. | 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | |
| 5. | 096-3772 M | [2] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 6. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 7. | 3B-4504 | [2] | LOCKWASHER | |
| 8. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 9. | 8T-2659 M | [2] | LOCKNUT (M4X0.7-THD) | |
| 10. | 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 11. | 148-5355 E | [50] | SEAL (50-CM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63780723
266-7007: LINER GP-CAB
For full view, you need register
Parts for your 24M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6389 Y | [1] | LAMP GP-DOME (24-VOLT)(CAB) | |
| 2. | 5T-1625 | [1] | PLATE AS | |
| 3. | 6T-7695 | [2] | SPEAKER AS-RADIO | |
| 4. | 9F-8125 | [3] | LOCKWASHER | |
| 5. | 9U-8263 | [1] | COVER | |
| 6. | 101-0003 | [2] | FASTENER | |
| 7. | 101-3055 | [2] | COVER-SPEAKER | |
| 8. | 172-8591 M | [20] | NUT-CLIP (M6X1-THD) | |
| 9. | 249-4097 | [1] | PLATE AS | |
| 10. | 250-8335 | [2] | LAMP AS (24-VOLT) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 11. | 274-2408 | [1] | LINER AS-CAB | |
| 12. | 276-9618 | [1] | PLATE | |
| 13. | 276-9619 | [1] | PLATE | |
| 14. | 301-9571 | [1] | FILM-IDENTIFICATION (WINDOW WIPER CONTROLS) | |
| 15. | 302-2138 | [1] | LINER AS-CAB | |
| 16. | 302-2139 | [1] | LINER AS-CAB | |
| 17. | 302-2140 | [1] | COVER AS | |
| 18. | 114-6658 | [8] | WASHER (6.5X17X1-MM THK) | |
| 19. | 033-4814 | [3] | SCREW (10-32X1-IN) | |
| 20. | 7X-0579 | [22] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 21. | 323-0201 | [8] | SCREW | |
| 22. | 9K-5635 | [4] | SCREW-TAPPING (8-18X1-IN) | |
| 23. | 9X-2045 M | [26] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 24. | 3E-8020 M | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63780724
424-1663: LINES GP-AIR CONDITIONER
For full view, you need register
Parts for your 24M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-1026 | [2] | CLAMP-BAND | |
| 2. | 416-0626 | [1] | COUPLING AS-REFRIGERANT (SELF-SEALING) | |
| 3. | 390-9168 | [1] | COUPLING AS-REFRIGERANT | |
| 4. | 248-2923 | [2] | FITTING-DRAIN | |
| 5. | 277-7575 | [2] | BRACKET AS | |
| 6. | 277-7576 | [2] | BLOCK | |
| 7. | 282-5969 | [2] | BLOCK | |
| 8. | 282-5970 | [2] | PLATE | |
| 9. | 364-0688 | [1] | ADAPTER AS | |
| 10. | 423-6337 | [1] | HOSE AS | |
| 11. | 423-6338 | [1] | HOSE AS | |
| 12. | 105-3484 M | [1] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 13. | 5J-7306 | [2] | CLIP | |
| 14. | 6D-4246 | [8] | CLIP (LOOP) | |
| 15. | 6V-1889 | [8] | CLIP (LOOP) | |
| 16. | 8T-4121 | [18] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4136 M | [10] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 20. | 9X-7383 | [1] | SEAL-O-RING | |
| 21. | 9X-7384 | [1] | SEAL-O-RING | |
| 22. | 9X-7385 | [2] | SEAL-O-RING | |
| 23. | 267-8575 H | TUBE (13-DM) | ||
| 23A. | 267-8575 H | TUBE (11-DM) | ||
| 24. | 160-2252 G | SLEEVE-ABRASION (24-IN) | ||
| G | ORDER BY THE INCH | |||
| H | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
#SEBP63780725
268-0243: LINES GP-HEATER
For full view, you need register
Parts for your 24M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8F-8151 | [2] | VALVE-SHUTOFF | |
| 2. | 9X-2488 | [4] | CLAMP-HOSE | |
| 3. | 3E-4321 | [4] | CLIP (LOOP) | |
| 4. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 5. | 6B-4661 | [2] | BUSHING-REDUCER | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 8. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 9. | 5P-0767 E | HOSE (707-CM) | ||
| 9A. | 5P-0767 E | HOSE (664-CM) | ||
| 10. | 160-2252 G | SLEEVE-ABRASION (1-IN) | ||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#SEBP63780726
138-0727: MIRROR GP-REAR VIEW
For full view, you need register
Parts for your 24M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 344-5675 M | [8] | NUT (M10X1.5-THD) | |
| 2. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 3. | 8T-4121 | [24] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 6G-8831 | [4] | CLAMP | |
| 5. | 197-2055 | [2] | MIRROR AS | |
| (EACH INCLUDES) | ||||
| 214-0647 | [1] | MIRROR AS | ||
| 6. | 113-8218 | [2] | ARM | |
| 7. | 123-4586 | [4] | BLOCK | |
| 8. | 123-4587 | [4] | BRACKET | |
| 9. | 8T-4182 M | [8] | BOLT (M10X1.5X45-MM) | |
| 10. | 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | |
| 11. | 6V-7744 M | [4] | LOCKNUT (M10X1.5-THD) | |
| 12. | 9C-5928 B | [8] | SPACER (10X19X5.15-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP63780727
266-7009: MIRROR GP-REAR VIEW
266-7009 MIRROR GP-REAR VIEW -EXTERIOR, HEATED
S/N B931-UP
PART OF 416-2944 CAB AR
AN ATTACHMENT
S/N B931-UP
PART OF 416-2944 CAB AR
AN ATTACHMENT
For full view, you need register
Parts for your 24M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [14] | STRAP-CABLE | |
| 2. | 113-8218 | [2] | ARM | |
| 3. | 123-4586 | [4] | BLOCK | |
| 4. | 123-4587 | [4] | BRACKET | |
| 5. | 202-8649 | [2] | MIRROR AS (HEATED) | |
| (EACH INCLUDES) | ||||
| 200-1173 | [1] | MIRROR AS (HEATED) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 236-4630 | [1] | SWITCH AS-ROCKER (HEATED MIRRORS) | |
| 7. | 297-0760 | [1] | RELAY AS (24-VDC, 20-AMPERE)(HEATED MIRRORS) | |
| 8. | 6G-8831 | [4] | CLAMP | |
| 9. | 6V-7744 M | [4] | LOCKNUT (M10X1.5-THD) | |
| 10. | 8T-4121 | [24] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 12. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 13. | 8T-4182 M | [8] | BOLT (M10X1.5X45-MM) | |
| 14. | 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | |
| 15. | 9C-5928 | [8] | SPACER (10X19X5.15-MM THK) | |
| 16. | 9X-2044 M | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| M | METRIC PART | |||
#SEBP63780728
309-0917: MIRROR GP-REAR VIEW
309-0917 MIRROR GP-REAR VIEW -INTERIOR
S/N B931-UP
PART OF 266-7000, 383-0814 CAB AR
AN ATTACHMENT
S/N B931-UP
PART OF 266-7000, 383-0814 CAB AR
AN ATTACHMENT
For full view, you need register
Parts for your 24M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-4512 | [1] | MIRROR | |
| 2. | 9P-9388 | [2] | KNOB (MIRROR ADJUSTMENT) | |
| 3. | 506-2551 | [1] | ANGLE AS (LH) | |
| 4. | 506-2552 | [1] | ANGLE AS (RH) | |
| 5. | 1D-4683 | [2] | BOLT-CARRIAGE (3/8-16X1-IN) | |
| 6. | 216-7352 M | [4] | SCREW-TRUSS HEAD (M8X1.25X30-MM) | |
| 7. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 8. | 271-2360 | [2] | WASHER-HARD (15X22X2.5-MM THK) | |
| M | METRIC PART | |||
#SEBP63780729
299-0881: MOUNTING GP-CONTROL
299-0881 MOUNTING GP-CONTROL
S/N B931-UP
WITH ENCLOSURE
PART OF 299-9146 CONTROL GP-ELECTROHYDRAULIC
AN ATTACHMENT
S/N B931-UP
WITH ENCLOSURE
PART OF 299-9146 CONTROL GP-ELECTROHYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your 24M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 251-2247 | [1] | GROMMET | |
| 2. | 281-0387 | [1] | PLATE (REAR) | |
| 3. | 281-0390 | [1] | GRIP | |
| 4. | 299-1030 | [1] | ENCLOSURE AS | |
| 5. | 225-3109 M | [2] | SCREW-TRUSS HEAD (M4X0.7X14-MM) | |
| 6. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 7. | 282-0808 E | SLEEVE (31-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 24M :
Truck sale:
$835,326 USD