AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

345-1272 SUPPORT GP-CONTROL -JOYSTICK, LH S/N N9R1-UP PART OF 345-1277 CONTROL & MTG GP-JOYSTICK 12M 3


OPERATOR STATION
SUPPORT GP
SEAT GP
WASHER GP-WINDOW
CAB GP
WINDOW GP

MOTOR GRADER 12M 3 MOTOR GRADER N9R
 12M Series 3 Motor Grader N9R00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP6389 12M 3 N9R   (2013)

OPERATOR STATION

SUPPORT GP
SUPPORT GP-CONTROL
345-1271 SUPPORT GP-CONTROL
SUPPORT GP-CONTROL
345-1272 SUPPORT GP-CONTROL
 

#SEBP63891110
 

345-1272: SUPPORT GP-CONTROL

345-1272 SUPPORT GP-CONTROL -JOYSTICK, LH
S/N N9R1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
i04040269 SEBP6389
3451272 SUPPORT GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 12M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [10] NUT-CLIP (M6X1-THD)  
2. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
3. 233-3227 [1] SUPPORT AS (LH)  
4. 233-3248 [2] BUSHING  
5. 233-3252 [1] SHAFT AS  
6. 251-2247 [1] GROMMET  
7. 252-1805 Y [1] CUSHION GP-ARM  
8. 252-1807 [1] SUPPORT AS (LH)  
  3G-0622 [2] RING-RETAINING  
  7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  294-1001 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
9. 253-3482 [1] KNOB AS (ARMREST ADJUSTMENT)  
10. 253-3483 [1] PLATE AS  
11. 253-3484 [2] WASHER (13X46X3.5-MM THK)  
12. 272-8329 [1] BRACKET AS (LH)  
13. 292-0617 Y [1] ARMREST GP (LH)  
14. 456-1559 [1] ADJUSTER AS  
15. 345-1275 [1] COVER  
16. 345-1276 [1] COVER  
17. 346-0627 [1] BRACKET  
18. 346-9580 [1] FILM-IDENTIFICATION (OPERATOR CONTROLS, LH)  
19. 114-6658 [10] WASHER (6.5X17X1-MM THK)  
20. 5C-9553 M [2] BOLT (M6X1X16-MM)  
21. 7J-5925 [1] PIN-COTTER  
22. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
23. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
24. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4908 M [7] BOLT (M8X1.25X25-MM)  
26. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
27. 9X-2044 M [10] SCREW-TRUSS HEAD (M6X1X16-MM)  
28. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
29. 8T-6936 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP63891111
 

160-7165: SUSPENSION GP-SEAT

160-7165 SUSPENSION GP-SEAT
S/N N9R1-UP
PART OF 369-6089, 443-8261 SEAT GP-SUSPENSION
i00860074 SEBP6389
1607165 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 12M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-6014 [1] HOUSING AS (LOWER)  
2. 174-2231 Y [1] HOUSING GP-SEAT SUSPENSION  
3. 4V-7884 [2] BEARING  
4. 4V-8577 [4] BEARING  
5. 8Y-5944 [1] KIT-SUSPENSION BOOT (SEAT)  
    (INCLUDES BOOT, RETAINERS & FASTENERS)
6. 8Y-5965 [1] ABSORBER AS-SHOCK  
7. 8Y-6012 [1] ARM AS-SUSPENSION  
8. 8Y-6024 [2] SHAFT AS  
9. 101-4194 [1] KIT-TETHER BELT (SUSPENSION SEAT)  
    (INCLUDES 2 BELTS)
10. 101-4195 [1] KIT-SUSPENSION ROLLER (SUSPENSION SEAT)  
    (INCLUDES 4 ROLLERS)
11. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
12. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
13. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
14. 5V-1497 [1] RETAINER  
   
  169-7380 F [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP63891112
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N N9R1-UP
24-VOLT
PART OF 385-7832, 385-7833 SEAT GP-SUSPENSION
Type 1
i05282832 SEBP6389
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 12M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
4. 8L-8413 [1] STRAP-CABLE (WHITE)  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [26] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
9. 186-5107 [2] SCREW-DRIVE (NO 8-16X1.25-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 192-7805 [1] HARNESS AS-VALVE (SEAT AIR COMPRESSOR)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  211-5358 E CONDUIT-FLEXIBLE (64-CM)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 [1] SHAFT (OUTER)  
23. 372-2158 C [1] BRACKET-MOUNTING  
24. 370-9894 C [1] COMPRESSOR AS  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
31. 5P-6010 D TUBE (0.27-M)  
31A. 5P-6010 D TUBE (0.36-M)  
32. 387-0314 C [1] WIRE AS (16-GA, ORANGE)  
33. 387-0317 C [1] WIRE AS (16-GA, BLACK)  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(ADJUSTABLE SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP63891113
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N N9R1-UP
24-VOLT
PART OF 385-7832, 385-7833, 443-8263 SEAT GP-SUSPENSION
Type 2
i05822714 SEBP6389
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 12M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [26] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 433-5754 CY [1] HARNESS AS-WIRING (SEAT AIR COMPRESSOR)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 [1] SHAFT (OUTER)  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
30A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
31. 5P-6010 D TUBE (0.27-M)  
31A. 5P-6010 D TUBE (0.36-M)  
32. 442-8151 C [1] CLIP-CABLE  
33. 3S-2093 C [4] STRAP-CABLE  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(ADJUSTABLE SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  397-6405 C [1] KIT-SEAT AIR COMPRESSOR (SUSPENSION SEAT)  
    (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET & HARNESS ASSEMBLIES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP63891114
 

191-2933: SUSPENSION GP-SEAT

191-2933 SUSPENSION GP-SEAT -AIR
S/N N9R1-UP
24-VOLT
PART OF 385-7832, 443-8262, 443-8263 SEAT GP-SUSPENSION
Type 3
i06084189 SEBP6389
1912933 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 12M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
5. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
6. 164-1234 [1] PLATE  
7. 101-0003 [26] FASTENER  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 433-5754 Y [1] HARNESS AS-WIRING (SEAT AIR COMPRESSOR)  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
  163-1135 [1] SPRING  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 [1] SHAFT (OUTER)  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
30. 211-5358 CE CONDUIT-FLEXIBLE (29-CM)  
30A. 211-5358 CE CONDUIT-FLEXIBLE (43-CM)  
32. 442-8151 [1] CLIP-CABLE  
33. 3S-2093 C [5] STRAP-CABLE  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SUSPENSION SEAT)  
    (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING)
  192-7848 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS)
  211-9294 [1] KIT-TETHER (SUSPENSION SEAT)  
    (INCLUDES TETHERS)
  213-5170 AB [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7779 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
  346-4360 AB [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY)  
    (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER)
  452-6716 C [1] KIT-SEAT AIR COMPRESSOR (SUSPENSION SEAT)  
    (INCLUDES SCREWS, COMPRESSOR AS, BRACKET, STRAPS & HOSE)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP63891115
 

256-8768: SUSPENSION GP-SEAT

256-8768 SUSPENSION GP-SEAT -AIR
S/N N9R1-UP
24-VOLT
PART OF 421-1286, 421-1287 SEAT GP-SUSPENSION
i05353971 SEBP6389
2568768 SUSPENSION GP-SEAT Parts scheme
  For full view, you need register

Parts for your 12M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
5. 101-0003 [26] FASTENER  
6. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
7. 164-1234 [1] PLATE  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 C [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 433-5754 [1] HARNESS AS-WIRING (SEAT AIR COMPRESSOR)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  097-7234 [2] TERMINAL-BLADE (18-GA TO 22-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  1P-0810 B TAPE-ELECTRICAL  
  329-3734 B TAPE-ELECTRICAL  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 C [1] SHAFT (OUTER)  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 5P-6010 D TUBE (0.257-M)  
29A. 5P-6010 D TUBE (0.356-M)  
30. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
31. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
31A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
34. 442-8151 [1] CLIP-CABLE  
35. 3S-2093 [4] STRAP-CABLE  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SEAT)  
    (INCLUDES KNOB ASSEMBLY)
  212-7779 H [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER,
    BRACKETS, KIT, CABLE ASSEMBLY & KNOB)
  211-9294 [1] KIT-TETHER (SEAT)  
    (INCLUDES TETHER)
  213-5170 [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7783 H [1] KIT-PULLEY  
    (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING)
  397-6405 [1] KIT-SEAT AIR COMPRESSOR  
    (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET-MOUNT & HARNESS ASSEMBLIES)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  H   KITS MARKED H SERVICE PART(S) MARKED H
  M   METRIC PART
 

#SEBP63891116
 

325-9410: TANK GP-WINDOW WASHER

325-9410 TANK GP-WINDOW WASHER
S/N N9R1-UP
PART OF 310-2029 WIPER & WASHER GP-WINDOW
i03955215 SEBP6389
3259410 TANK GP-WINDOW WASHER Parts scheme
  For full view, you need register

Parts for your 12M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-5698 [1] GROMMET  
2. 416-0021 [3] PUMP AS-WASHER (24-VOLT)  
3. 261-3345 [1] CONNECTOR  
4. 267-8715 [3] GROMMET  
5. 321-5236 [3] PLUG  
6. 355-9823 [1] TANK AS-WINDOW WASHER  
 

#SEBP63891117
 

361-3108: TRIM GP-CAB

361-3108 TRIM GP-CAB -HVAC
S/N N9R1-UP
PART OF 361-3140, 387-9586, 387-9587 CAB AR
Type 1
i05474554 SEBP6389
3613108 TRIM GP-CAB Parts scheme 3613108 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your 12M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0622 B [10] PLUG-BUTTON  
2. 2V-2015 [1] NUT-SPEED  
3. 172-8591 M [7] NUT-CLIP (M6X1-THD)  
4. 6V-8928 [1] HOOK-COAT  
5. 8Y-6379 [1] KIT-HAMMER (CAB WINDOW)  
    (INCLUDES BRACKET & HAMMER)
6. 8Y-6388 [4] LOUVER AS-VENT  
7. 9U-8263 B [1] COVER  
8. 144-4107 B [2] FASTENER  
9. 164-8474 [2] LOUVER AS-VENT  
10. 171-4047 [4] LOUVER AS-VENT  
11. 274-2392 [1] SCREW-THUMB  
12. 294-1002 [1] PLENUM (LOWER, RH)  
13. 294-1004 [1] PLENUM (LOWER, LH)  
14. 297-4170 [1] INSULATION  
15. 303-9456 [1] CUP HOLDER  
16. 325-1258 [1] PLENUM (UPPER, RH)  
17. 325-1260 [1] PLENUM (UPPER, LH)  
18. 357-2261 [1] SUPPORT AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
19. 325-9407 [1] FILM-IDENTIFICATION (WRITE DATA)  
20. 357-2270 [1] COVER AS  
21. 330-3865 [1] PLATE AS  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  419-3214 [6] BOSS  
23. 343-6499 [1] COVER AS (RH)  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
24. 343-6500 [1] COVER AS (LH)  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
25. 361-0429 [1] PANEL (LH)  
26. 361-3116 [1] TRAY  
27. 361-3117 [1] PAD  
28. 368-8072 [1] PANEL  
29. 373-4446 B [1] PLUG  
30. 398-8490 [1] COVER AS-PANEL  
  297-4162 [1] FILM-IDENTIFICATION (SWITCH PANEL, UPPER)  
  398-9593 [1] FILM-IDENTIFICATION (SWITCH PANEL, LOWER)  
32. 419-7776 [1] COVER AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
33. 7X-0579 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
34. 436-7082 [1] TRAY  
35. 437-8991 [1] NET AS (STORAGE)  
39. 263-2576 [1] PLATE AS  
40. 361-0425 [1] FLOOR MAT AS  
43. 104-2091 [16] SCREW-FLAT HEAD (6-20X0.5-IN)  
44. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
45. 114-6658 [21] WASHER (6.5X17X1-MM THK)  
46. 195-0936 M [6] INSERT-THREADED (M6X1-THD)  
48. 2R-2376 [1] WASHER (7X16X0.8-MM THK)  
49. 2V-3726 B [1] BUMPER  
50. 3E-8020 M [8] SCREW-TRUSS HEAD (M6X1X25-MM)  
51. 6K-3273 [1] RIVET-POP  
52. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
53. 6V-8212 M [4] BOLT (M10X1.5X16-MM)  
54. 8C-9660 [6] WASHER (4.6X7.9X0.8-MM THK)  
55. 8R-3695 B [1] GROMMET  
56. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
57. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
58. 9N-1995 [3] RIVET-POP  
59. 9X-2038 [9] WASHER (7X19X2-MM THK)  
60. 9X-2043 M [7] SCREW-TRUSS HEAD (M6X1X14-MM)  
61. 9X-2044 M [14] SCREW-TRUSS HEAD (M6X1X16-MM)  
62. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
63. 5P-5927 D SEAL (0.9-M)  
64. 8T-6936 D SEAL (0.5-M EACH)  
65. 361-3114 [1] PLATE AS  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
66. 193-5916 [4] PLUG  
67. 162-2165 M [1] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
68. 096-6166 [1] WASHER-HARD (4.5X9X1-MM THK)  
69. 8E-7791 [1] STRAP  
70. 8D-6542 [1] GROMMET  
71. 7G-4824 [1] STRAP  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP63891118
 

361-3108: TRIM GP-CAB

361-3108 TRIM GP-CAB -HVAC
S/N N9R1-UP
PART OF 361-3140, 387-9586, 387-9587, 555-0543, 555-0544, 555-0545 CAB AR
Type 2
i06102401 SEBP6389
3613108 TRIM GP-CAB Parts scheme 3613108 TRIM GP-CAB Parts scheme
  For full view, you need register

Parts for your 12M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0622 B [10] PLUG-BUTTON  
2. 2V-2015 [1] NUT-SPEED  
3. 6V-8928 [1] HOOK-COAT  
4. 8Y-6379 [1] KIT-HAMMER (CAB WINDOW)  
    (INCLUDES BRACKET & HAMMER)
5. 422-2152 [4] LOUVER AS-VENT  
6. 9U-8263 B [1] COVER  
7. 144-4107 B [2] FASTENER  
8. 164-8474 [2] LOUVER AS-VENT  
9. 171-4047 [4] LOUVER AS-VENT  
10. 214-9186 C [5] BUTTON  
11. 274-2392 [1] SCREW-THUMB  
12. 294-1002 [1] PLENUM (LOWER, RH)  
13. 294-1004 [1] PLENUM (LOWER, LH)  
14. H INSULATION-BULK (5-DM)  
15. 303-9456 [1] CUP HOLDER  
16. 325-1258 [1] PLENUM (UPPER, RH)  
17. 325-1260 [1] PLENUM (UPPER, LH)  
18. 325-9407 [1] FILM-IDENTIFICATION (WRITE DATA)  
19. 330-3865 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
20. 334-6090 C [6] STUD  
21. 343-6499 [1] COVER AS (RH)  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
22. 343-6500 [1] COVER AS (LH)  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
23. 357-2261 [1] SUPPORT AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
24. 357-2270 [1] COVER AS  
25. 361-0429 [1] PANEL (LH)  
26. 361-3116 [1] TRAY  
27. 361-3117 [1] PAD  
28. 368-8072 [1] PANEL  
29. 373-4446 B [1] PLUG  
30. 398-8490 [1] COVER AS-PANEL  
  297-4162 [1] FILM-IDENTIFICATION (SWITCH PANEL, UPPER)  
  398-9593 [1] FILM-IDENTIFICATION (SWITCH PANEL, LOWER)  
31. 417-6775 C [1] TRAY  
32. 419-7776 [1] COVER AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
33. 419-8564 C [2] STRAP  
34. 436-7082 [1] TRAY  
35. 437-8991 [1] NET AS (STORAGE)  
36. 438-8077 C [1] BIN-STORAGE  
37. 438-8078 C [1] BIN-STORAGE  
38. 355-5860 C [6] RECEPTACLE (CLIP)  
39. 441-7480 C [1] PLATE AS  
40. 443-6429 C [1] FLOOR MAT AS  
41. 445-0466 C [2] INSERT  
42. 448-3613 C [1] STRAP  
43. 463-6185 C [1] LINER  
44. 463-6186 C [1] LINER  
45. 104-2091 [16] SCREW-FLAT HEAD (6-20X0.5-IN)  
46. 111-4627 M [6] SCREW-MACHINE (M6X1X30-MM)  
47. 172-8591 M [7] NUT-CLIP (M6X1-THD)  
48. 195-0936 M [6] INSERT-THREADED (M6X1-THD)  
49. 212-6891 C [6] RETAINER  
50. 232-1473 [17] WASHER (6X18X1-MM THK)  
51. 2V-3726 B [1] BUMPER  
52. 3E-8020 M [8] SCREW-TRUSS HEAD (M6X1X25-MM)  
53. 4I-3069 [1] WASHER-HARD (7X15.5X0.8-MM THK)  
54. 6K-3273 [4] RIVET-POP  
55. 7X-0579 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
56. 8C-9660 [6] WASHER (4.6X7.9X0.8-MM THK)  
57. 8R-3695 B [1] GROMMET  
58. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
59. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
60. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
61. 9X-2038 [9] WASHER (7X19X2-MM THK)  
62. 9X-2043 M [7] SCREW-TRUSS HEAD (M6X1X14-MM)  
63. 9X-2044 CM [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
64. 9X-2045 CM [9] SCREW-TRUSS HEAD (M6X1X20-MM)  
65. 5P-5927 D SEAL (0.9-M)  
66. 8T-6936 D SEAL (0.5-M EACH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  H   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP63891119
 

300-1870: WINDOW GP-CAB

300-1870 WINDOW GP-CAB -REAR, SIDE
S/N N9R1-UP
LOWER
PART OF 387-9502 CAB GP
i02737395 SEBP6389
3001870 WINDOW GP-CAB Parts scheme
  For full view, you need register

Parts for your 12M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-7524 [6] BUTTON  
2. 214-9186 [2] BUTTON  
3. 233-3235 [1] GLASS-REAR  
4. 300-1871 [1] GLASS (RH)  
5. 300-1872 [1] GLASS (LH)  
6. 3E-3000 E SEAL (392-CM EACH)  
  E   ORDER BY THE CENTIMETER
 

Information:

Caterpillar Parts SIS Catalog 12M 3 :

SUPPORT GP-CONTROL
345-1271 SUPPORT GP-CONTROL
SEAT GP-SUSPENSION
489-6481 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
443-8263 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
443-8262 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
443-8261 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
443-8261 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
443-8216 SEAT GP-SUSPENSION
SEAT GP-SUSPENSION
421-1287 SEAT GP-SUSPENSION
SUSPENSION GP-SEAT
160-7165 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT
TANK GP-WINDOW WASHER
325-9410 TANK GP-WINDOW WASHER
TRIM GP-CAB
361-3108 TRIM GP-CAB
TRIM GP-CAB
361-3108 TRIM GP-CAB

Truck sale:

Caterpillar 12M 3
 
Caterpillar 12M 3
- Skid Steer Loaders
FOLEY EQUIPMENT COMPANY
 
 
Caterpillar 12M3
- motor graders
YANCEY BROS. CO.
Caterpillar 12M3
 
Caterpillar 12M3
- motor graders
FOLEY EQUIPMENT COMPANY
Caterpillar 12M3, motor graders, Construction
229,500 
Caterpillar 12M3, motor graders, Construction
- motor graders
ZIEGLER CAT
 
194,750 
Caterpillar 12M3, motor graders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.