IMPLEMENTS
CIRCLE GPDRAWBAR GP
MOLDBOARD GP
OPERATOR STATION
AIR CONDITIONER GPSEAT GP
IMPLEMENTS
CIRCLE GP
#SEBP63901040
243-6660: CIRCLE GP
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 190-0627 B | [6] | SHIM (2-MM THK) | |
| 2. | 243-6650 | [1] | CIRCLE AS | |
| 3. | 243-6652 | [4] | COVER | |
| 4. | 446-1526 | [2] | STRIP-WEAR | |
| 5. | 276-1318 | [2] | STRIP-WEAR | |
| 6. | 276-1319 | [2] | STRIP-WEAR | |
| 7. | 252-7086 Y | [1] | MOUNTING GP-BLADE | |
| 8. | 253-4645 | [2] | SHAFT | |
| 9. | 253-4646 | [2] | PLATE AS | |
| 10. | 265-6722 | [4] | COVER | |
| 11. | 095-1235 M | [4] | NUT-CASTLE (M42X4.5-THD) | |
| 12. | 095-0865 | [4] | PIN-COTTER | |
| 13. | 285-6124 | [16] | WASHER-HARD (16X35X5-MM THK) | |
| 14. | 285-6125 M | [16] | BOLT (M14X2-THD) | |
| 15. | 6V-7688 M | [6] | LOCKNUT (M20X2.5-THD) | |
| 16. | 7X-7740 | [4] | WASHER (45X78X8-MM THK) | |
| 17. | 129-2220 M | [6] | SETSCREW-SOCKET (M20X2.5X80-MM) | |
| 18. | 467-5183 | [8] | BUSHING | |
| 19. | 283-1578 | [4] | WASHER-HARD (22X45X10-MM THK) | |
| 20. | 466-1604 | [2] | SPACER | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63901041
243-6660: CIRCLE GP
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 190-0627 B | [6] | SHIM (2-MM THK) | |
| 2. | 243-6650 | [1] | CIRCLE AS | |
| 3. | 243-6652 | [4] | COVER | |
| 4. | 446-1526 | [2] | STRIP-WEAR | |
| 5. | 276-1318 | [2] | STRIP-WEAR | |
| 6. | 276-1319 | [2] | STRIP-WEAR | |
| 7. | 558-2398 C | [1] | MOUNTING GP-BLADE | |
| 8. | 253-4645 | [2] | SHAFT | |
| 9. | 253-4646 | [2] | PLATE AS | |
| 10. | 265-6722 | [4] | COVER | |
| 11. | 095-1235 M | [4] | NUT-CASTLE (M42X4.5-THD) | |
| 12. | 095-0865 | [4] | PIN-COTTER | |
| 13. | 285-6124 | [16] | WASHER-HARD (16X35X5-MM THK) | |
| 14. | 285-6125 M | [16] | BOLT (M14X2-THD) | |
| 15. | 6V-7688 M | [6] | LOCKNUT (M20X2.5-THD) | |
| 16. | 7X-7740 | [4] | WASHER (45X78X8-MM THK) | |
| 17. | 129-2220 M | [6] | SETSCREW-SOCKET (M20X2.5X80-MM) | |
| 18. | 467-5183 | [8] | BUSHING | |
| 19. | 283-1578 | [4] | WASHER-HARD (22X45X10-MM THK) | |
| 20. | 466-1604 | [2] | SPACER | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP63901042
243-6660: CIRCLE GP
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4648 CM | [2] | BOLT (M12X1.75X70-MM) | |
| 2. | 129-2220 M | [6] | SETSCREW-SOCKET (M20X2.5X80-MM) | |
| 3. | 190-0627 BC | [22] | SHIM (2-MM THK) | |
| 4. | 243-6650 | [1] | CIRCLE AS | |
| 5. | 243-6652 | [4] | COVER | |
| 6. | 253-4646 | [2] | PLATE AS | |
| 7. | 265-6722 | [4] | COVER | |
| 8. | 276-1318 | [2] | STRIP-WEAR | |
| 9. | 276-1319 | [2] | STRIP-WEAR | |
| 10. | 283-1578 | [4] | WASHER-HARD (22X45X10-MM THK) | |
| 11. | 285-6124 | [16] | WASHER-HARD (16X35X5-MM THK) | |
| 12. | 285-6125 M | [16] | BOLT (M14X2-THD) | |
| 13. | 3B-8489 C | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 14. | 446-1526 | [2] | STRIP-WEAR | |
| 15. | 466-1604 | [2] | SPACER | |
| 16. | 467-5183 | [8] | BUSHING | |
| 17. | 526-6468 C | [2] | PIN | |
| 18. | 526-6469 C | [2] | COLLAR | |
| 19. | 558-2398 | [1] | MOUNTING GP-BLADE | |
| 20. | 6V-7687 CM | [2] | LOCKNUT (M12X1.75-THD) | |
| 21. | 6V-7688 M | [6] | LOCKNUT (M20X2.5-THD) | |
| 22. | 7X-0584 C | [2] | WASHER-HARD (13.5X20.5X2-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP63901043
253-4630: DRAWBAR GP
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-5119 | [12] | NUT (3/4-10-THD) | |
| 2. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 6G-5442 | [1] | BALL | |
| 4. | 6K-6444 | [2] | SPACER | |
| 5. | 7J-8782 | [3] | PLUG | |
| 6. | 333-0960 | [6] | STRIP-WEAR | |
| 7. | 201-8034 M | [18] | BOLT (M20X2.5X120-MM) | |
| 8. | 312-0780 | [6] | SHOE-CIRCLE GUIDE | |
| 9. | 253-4651 | [1] | DRAWBAR & YOKE AS | |
| 9A. | 178-3086 | [3] | STUD-BALL | |
| 9B. | 243-1786 | [1] | SHAFT AS | |
| 9C. | 243-6658 | [1] | PLATE | |
| 9D. | 243-6659 | [1] | PLATE | |
| 9E. | 285-4247 | [1] | PLATE | |
| 9F. | 285-4265 | [1] | PLATE | |
| 9G. | 178-7023 M | [4] | BOSS (M10X1.5X30-MM) | |
| 9H. | 7Y-6338 M | [2] | BOSS (M10X1.5X70-MM) | |
| 9J. | 8Y-3795 M | [1] | BOSS (M10X1.5X39-MM) | |
| 9K. | 9R-2672 M | [7] | BOSS-THREADED (M10X1.5X120-MM) | |
| 9L. | 9R-9866 M | [2] | BOSS-THREADED (M10X1.5-THD) | |
| 10. | 302-6338 | [6] | STRIP-WEAR | |
| 11. | 302-6337 B | [6] | SHIM (10-MM THK) | |
| 12. | 302-6335 B | [12] | SHIM (0.25-MM THK) | |
| 302-6336 B | [42] | SHIM (0.5-MM THK) | ||
| 14. | 261-4672 | [1] | CAP (DRAWBAR) | |
| 15. | 261-4673 | [1] | ADAPTER | |
| 16. | 261-4674 B | [4] | SHIM (0.8-MM THK) | |
| 261-4675 B | [6] | SHIM (0.25-MM THK) | ||
| 261-4676 B | [1] | SHIM (0.12-MM THK) | ||
| 19. | 342-7352 | [4] | COVER | |
| 20. | 342-7353 | [1] | COVER | |
| 21. | 342-7351 | [1] | COVER | |
| 22. | 283-1578 | [20] | WASHER-HARD (22X45X10-MM THK) | |
| 23. | 288-3678 M | [14] | BOLT (M20X2.5X45-MM) | |
| 24. | 3E-5001 | [2] | PIN-SPRING | |
| 25. | 147-5112 M | [4] | BOLT (M24X3X150-MM) | |
| 26. | 550-3302 M | [2] | BOLT-HEAD (M20X2.5X80-MM) | |
| 27. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 28. | 8T-4123 | [18] | WASHER (22X35X3.5-MM THK) | |
| 29. | 483-0424 M | [4] | LOCKNUT (M20X2.5-THD) | |
| 30. | 287-5701 M | [2] | BOLT (M20X2.5X50-MM) | |
| 31. | 289-0580 | [12] | SETSCREW (3/4-10X2.5-IN) | |
| 32. | 5P-8291 | [5] | BOLT (3/4-16X2-IN) | |
| 33. | 6V-8653 M | [2] | BOLT-SOCKET HEAD (M6X1X40-MM) | |
| 302-6335 BFJ | [24] | SHIM (0.25-MM THK) | ||
| 302-6336 BFJ | [60] | SHIM (0.5-MM THK) | ||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| J | LOCATED IN THE TOOLBOX | |||
| M | METRIC PART | |||
#SEBP63901044
525-5599: MOLDBOARD AS
525-5599 MOLDBOARD AS
S/N N9P1-UP
3.66-M (12-FT)
PART OF 517-7347, 517-7348 BLADE & MTG GP-SNOW
S/N N9P1-UP
3.66-M (12-FT)
PART OF 517-7347, 517-7348 BLADE & MTG GP-SNOW
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-3033 | [2] | EDGE-CUTTING | |
| 2. | 525-5598 | [1] | BUMPER | |
| 3. | 5J-4773 | [26] | BOLT-PLOW (3/4-10X2.5-IN) | |
| 4. | 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | |
| 5. | 2J-3506 | [26] | NUT-FULL (3/4-10-THD) | |
| 6. | 3S-2713 | [2] | NUT-FULL (3/8-24-THD) | |
| 7. | 5P-8248 | [26] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 8. | 456-6896 | [4] | WASHER (63.5X114.3X15.875-MM THK) | |
| 9. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
#SEBP63901045
387-8752: AIR CONDITIONER & MOUNTING GP
387-8752 AIR CONDITIONER & MOUNTING GP
S/N N9P1-UP
PART OF 361-3133 AIR CONDITIONER GP
S/N N9P1-UP
PART OF 361-3133 AIR CONDITIONER GP
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 249-0410 | [2] | GASKET | |
| 2. | 249-0411 | [1] | GASKET | |
| 3. | 249-0937 | [1] | DUCT | |
| 4. | 265-7454 | [1] | GASKET | |
| 5. | 285-8055 Y | [1] | AIR CONDITIONER GP | |
| 6. | 387-8731 | [2] | SPACER | |
| 7. | 118-5619 | [2] | SCREW-FLAT HEAD (6-20X1-IN) | |
| 8. | 145-6669 | [2] | SCREW-SELF-TAPPING (10X0.75-IN) | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 11. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 12. | 5P-5637 D | SEAL (0.5-M) | ||
| 13. | 5P-5643 D | SEAL (0.5-M) | ||
| 14. | 5P-5927 D | SEAL (1.3-M) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63901046
285-8055: AIR CONDITIONER GP
285-8055 AIR CONDITIONER GP
S/N N9P1-UP
PART OF 387-8752 AIR CONDITIONER & MOUNTING GP
S/N N9P1-UP
PART OF 387-8752 AIR CONDITIONER & MOUNTING GP
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 119-9631 | [1] | SWITCH-TEMPERATURE (AIR CONDITIONER) | |
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 6T-6708 | [2] | WASHER (7X28.6X4.1-MM THK) | |
| 4. | 125-9740 | [1] | RESISTOR | |
| 5. | 133-9012 C | [2] | FUSE (15-AMPERE)(AIR CONDITIONER, HEATER) | |
| 6. | 249-0934 | [1] | CASE AS | |
| 7. | 249-0938 | [1] | CASE | |
| 8. | 263-9466 | [1] | PLATE | |
| 9. | 265-7434 | [1] | SEAL | |
| 10. | 265-7435 | [1] | GASKET | |
| 11. | 273-0342 | [1] | FILM-IDENTIFICATION (SERIAL NUMBER) | |
| 12. | 276-9015 | [1] | HARNESS AS-MOTOR (HVAC) | |
| 7T-0093 | [2] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 100-6674 | [3] | SEAL-CONNECTOR | ||
| 118-5125 | [1] | CLIP (LOOP) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 5P-5618 | [3] | TERMINAL-BLADE (10-GA TO 12-GA) | ||
| 5P-4571 | [5] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 2L-8067 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 177-9645 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3389 | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | ||
| 14. | 278-3354 | [1] | FILM-INSTRUCTION (HVAC WATER, DRAINING, FILLING) | |
| 15. | 279-1124 | [1] | GROMMET | |
| 16. | 322-6674 C | [1] | PLATE | |
| 17. | 322-6675 C | [1] | PLATE AS | |
| 18. | 466-7341 C | [1] | FAN AS (24-VOLT, A/C, HEATER)(9-BLADE) | |
| 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | ||
| 19. | 328-8755 C | [1] | WIRE AS | |
| 20. | 129-3178 CM | [1] | LOCKNUT (M6X1-THD) | |
| 21. | 132-5793 C | [2] | SCREW-WASHER HEAD (4-40X0.25-IN) | |
| 22. | 7X-0490 M | [1] | BOLT (M6X1X200-MM) | |
| 23. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 24. | 6V-6717 | [2] | SCREW-WASHER HEAD (8-32X9.52-MM) | |
| 25. | 8T-4205 C | [10] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 27. | 9X-2044 CM | [14] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 28. | 6D-5801 | [3] | LOCKNUT (8-32-THD) | |
| 29. | 238-8839 | [1] | CORE AS-HEATER | |
| 30. | 238-8840 | [1] | COIL AS-EVAPORATOR | |
| 31. | 245-1596 | [1] | ACTUATOR (WATER VALVE) | |
| 32. | 281-2588 | [6] | SCREW-SELF-TAPPING | |
| 33. | 450-4968 | [2] | SCREW-HEX HEAD (8-16X0.5-IN) | |
| 34. | 465-7612 | [1] | CLIP | |
| 35. | 470-3946 | [1] | SEAL-O-RING | |
| 36. | 521-2576 | [1] | VALVE AS-CONTROL (AIR CONDITIONER) | |
| 262-4930 | [1] | TUBE AS | ||
| 465-7612 | [1] | CLIP | ||
| 470-3946 | [1] | SEAL-O-RING | ||
| 37. | 521-3096 | [1] | PLATE AS | |
| 38. | 525-2467 | [3] | SPACER (4.34X9.53X15.9-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63901047
361-3133: AIR CONDITIONER GP
361-3133 AIR CONDITIONER GP
S/N N9P1-UP
PART OF 361-3140, 387-9586, 387-9587, 468-5718, 471-8635, 555-0543, 555-0544, 555-0545 CAB AR
S/N N9P1-UP
PART OF 361-3140, 387-9586, 387-9587, 468-5718, 471-8635, 555-0543, 555-0544, 555-0545 CAB AR
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 387-8752 Y | [1] | AIR CONDITIONER & MOUNTING GP | ||
| 244-2701 Y | [1] | DUCT & FILTER GP-CAB AIR | ||
| 361-3134 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 250-2933 Y | [1] | LINES GP-HEATER (CAB) | ||
| 300-4231 | [1] | CONTROL GP-AIR & TEMPERATURE | ||
| 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | ||
| 248-4220 | [1] | PANEL AS (AIR CONDITIONER, HEATER CONT) | ||
| 271-7312 | [1] | KNOB (TEMPERATURE CONTROL) | ||
| 285-7415 | [1] | KNOB (BLOWER FAN SPEED) | ||
| 284-3662 | [1] | SWITCH AS-ROCKER (24-VOLT)(AIR CONDITIONER) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63901048
292-0609: ARMREST GP
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 233-3278 | [1] | BRACKET AS (RH) | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 2. | 253-8868 | [1] | PIN-SPRING | |
| 3. | 283-7980 | [1] | CUSHION AS | |
| 4. | 3E-8020 M | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 5. | 122-7666 | [1] | SPRING | |
| 6. | 8C-8430 | [1] | SETSCREW-SOCKET (10-24X1-IN) | |
| 7. | 292-0611 | [2] | BUSHING | |
| 8. | 292-0612 | [1] | BUSHING | |
| 9. | 292-0614 | [1] | ROD | |
| 10. | 292-0618 | [1] | KNOB | |
| M | METRIC PART | |||
#SEBP63901049
292-0617: ARMREST GP
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 233-3277 | [1] | BRACKET AS (LH) | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 2. | 253-8868 | [1] | PIN-SPRING | |
| 3. | 283-7980 | [1] | CUSHION AS | |
| 4. | 3E-8020 M | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 5. | 8C-8430 | [1] | SETSCREW-SOCKET (10-24X1-IN) | |
| 6. | 122-7666 | [1] | SPRING | |
| 7. | 292-0611 | [2] | BUSHING | |
| 8. | 292-0612 | [1] | BUSHING | |
| 9. | 292-0614 | [1] | ROD | |
| 10. | 292-0618 | [1] | KNOB | |
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 12M 3 AWD :
Truck sale:
219,500
