ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP63910550
380-3005: WIRING GP-FAN
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4136 CM | [2] | BOLT (M10X1.5X25-MM) | |
| 2. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 3. | 8T-5005 CM | [1] | BOLT (M10X1.5X70-MM) | |
| 4. | 130-5300 C | [3] | CLIP | |
| 5. | 7K-1181 C | [2] | STRAP-CABLE | |
| 6. | 7X-7729 C | [1] | WASHER (11X25X3-MM THK) | |
| 7. | 8T-4121 C | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 10. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 11. | 169-5414 C | [1] | CLIP | |
| 12. | 375-6142 | [1] | FAN AS (ELECTRICAL ENCLOSURE) | |
| 177-9645 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 243-4507 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 351-0979 | [1] | BLADE-FAN (7-BLADE) | ||
| 416-0108 | [1] | GUARD-FAN | ||
| 13. | 130-8360 C | [1] | GROMMET | |
| 14. | 498-4442 CY | [1] | HARNESS AS-WIRING (FAN) | |
| 15. | 204-2281 | [4] | STRAP-CABLE | |
| 16. | 204-8000 | [4] | MOUNTING-CABLE TIE | |
| 17. | 4P-7581 | [1] | CLIP (LADDER) | |
| 18. | 4P-8134 C | [1] | CLIP (LADDER) | |
| 19. | 6W-6672 | [1] | SPACER (10.5X20X38-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63910551
519-3755: WIRING GP-FAN
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS#SEBP63910552
380-3030: WIRING GP-FRONT
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1F-7854 | [1] | SPACER (11.01X19.05X49.21-MM THK) | |
| 2. | 3E-3636 | [1] | SWITCH AS-BALL (CENTERSHIFT PIN) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 7K-1181 | [46] | STRAP-CABLE | |
| 4. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 5. | 132-1805 | [1] | STRAP AS-GROUND | |
| 6. | 172-4211 | [1] | SPACER (10.5X22X50.8-MM THK) | |
| 7. | 174-7875 | [1] | HORN AS (24-VOLT, HIGH TONE) | |
| 8. | 191-6587 Y | [1] | SENSOR GP-TEMPERATURE (2-PIN)(HYDRAULIC, STEERING) | |
| 9. | 193-5576 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 10. | 204-2281 | [1] | STRAP-CABLE | |
| 11. | 204-8000 | [1] | MOUNTING-CABLE TIE | |
| 12. | 283-5830 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 13. | 291-4826 | [1] | CHANNEL | |
| 14. | 291-4827 | [1] | CHANNEL | |
| 15. | 319-5096 | [1] | BRACKET | |
| 16. | 354-8415 | [1] | BRACKET AS | |
| 17. | 356-3650 | [1] | CHANNEL AS | |
| 7X-0750 M | [1] | BOSS-WELD (M10X1.5X55-MM) | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3851 M | [1] | BOSS-WELD (M10X1.5X17.5-MM) | ||
| 18. | 380-3033 | [1] | BRACKET AS | |
| 8T-5413 M | [1] | STUD-WELD (M10X1.5X25-MM) | ||
| 19. | 380-3034 | [1] | HARNESS AS-FRONT CHASSIS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7T-0094 | [2] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8730 | [115] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [35] | PLUG-SEAL | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM) | |||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 155-2270 | [28] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 197-7261 | [1] | PLUG AS-CONNECTOR (19-PIN) | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 274-3774 | [9] | CAP-CONNECTOR | ||
| 274-3777 | [1] | CAP-CONNECTOR | ||
| 20. | 391-4440 Y | [1] | HARNESS AS-VALVE (STEERING) | |
| 21. | 130-5300 | [7] | CLIP | |
| 22. | 132-5789 | [7] | CLIP (LADDER) | |
| 23. | 237-9960 | [3] | CLIP (LADDER) | |
| 24. | 3J-1907 | [2] | SEAL-O-RING | |
| 25. | 4P-7581 | [10] | CLIP (LADDER) | |
| 26. | 4P-8134 | [3] | CLIP (LADDER) | |
| 27. | 7D-7233 | [1] | CLIP (LOOP) | |
| 28. | 8F-1974 B | [10] | SHIM (0.13-MM THK) | |
| 29. | 8T-2920 | [2] | GROMMET (27-MM ID) | |
| 30. | 8T-4121 | [39] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| 32. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 33. | 8T-4137 M | [28] | BOLT (M10X1.5X20-MM) | |
| 34. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 35. | 8T-5005 M | [2] | BOLT (M10X1.5X70-MM) | |
| 36. | 9X-8250 | [1] | CLIP (LOOP) | |
| 37. | 352-3964 | [1] | CLIP (LADDER) | |
| 38. | 4D-2886 | [1] | CLIP | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63910553
380-3050: WIRING GP-FRONT
380-3050 WIRING GP-FRONT
S/N N9M1-UP
NON ALL WHEEL DRIVE
PART OF 380-3007 ELECTRICAL AR
S/N N9M1-UP
NON ALL WHEEL DRIVE
PART OF 380-3007 ELECTRICAL AR
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 360-2086 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 2. | 360-2087 | [2] | COVER | |
| 3. | 380-3052 | [1] | HARNESS AS-SENSOR | |
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 232-0895 E | CONDUIT-FLEXIBLE (9.6-MM ID)(119-CM) | |||
| 263-6540 M | [1] | NUT (M16X1.5-THD) | ||
| 369-9842 | [1] | FITTING-ELBOW | ||
| 4. | 448-8651 | [1] | HARNESS AS-WIRING | |
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 232-0895 E | CONDUIT-FLEXIBLE (9.6-MM ID)(79-CM) | |||
| 263-6540 M | [1] | NUT (M16X1.5-THD) | ||
| 369-9842 | [1] | FITTING-ELBOW | ||
| 5. | 3E-6909 | [2] | CLIP (LOOP) | |
| 6. | 3V-2431 | [4] | WASHER (10.2X16X2-MM THK) | |
| 7. | 4S-5565 | [4] | BOLT (3/8-16X0.875-IN) | |
| 8. | 8M-2770 | [5] | CLIP (LOOP) | |
| 9. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4137 M | [9] | BOLT (M10X1.5X20-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63910554
380-3060: WIRING GP-GRADE CONTROL
380-3060 WIRING GP-GRADE CONTROL -ACCUGRADE
S/N N9M1-UP
PART OF 394-3913, 394-3915, 462-7928, 462-7929 GRADE CONTROL AR
Type 1
S/N N9M1-UP
PART OF 394-3913, 394-3915, 462-7928, 462-7929 GRADE CONTROL AR
Type 1
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-3033 | [16] | SCREW-SOCKET HEAD (4-40X0.5-IN) | |
| 2. | 7K-1181 | [29] | STRAP-CABLE | |
| 3. | 9C-5344 | [2] | SPACER (10.5X20X18-MM THK) | |
| 4. | 9G-7101 | [1] | SPACER (11X20X30-MM THK) | |
| 5. | 132-8487 | [4] | NUT-RING | |
| 6. | 169-5414 | [1] | CLIP | |
| 7. | 236-2356 Y | [1] | HARNESS AS-SENSOR (ANGLE) | |
| 8. | 236-8826 | [4] | BOSS (1-1/8-18X0.708-IN) | |
| 9. | 243-3250 Y | [1] | HARNESS AS-SENSOR (ROTATION) | |
| 10. | 251-1133 | [1] | TUBE | |
| 11. | 255-3482 | [1] | BRACKET | |
| 12. | 308-9367 | [1] | HARNESS AS-SWITCH (ROTATION, INCLINATION)(INCLINATION) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-1424 E | HOSE (258-CM) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 210-8958 E | TUBE-HEAT SHRINK (24-MM DIA)(14-CM) | |||
| 13. | 308-9396 | [2] | BRACKET AS | |
| 14. | 308-9398 | [1] | BRACKET AS | |
| 15. | 308-9399 | [1] | BRACKET AS | |
| 16. | 327-0560 | [1] | BRACKET (RH) | |
| 17. | 327-0561 | [1] | BRACKET (LH) | |
| 18. | 380-3061 | [1] | HARNESS AS-CHASSIS (GRADE CONTROL) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7R-3029 | [4] | CAP-DUST | ||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(115-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 228-3323 | [4] | CLIP-SPRING | ||
| 243-5362 | [1] | CAP-DUST | ||
| 359-5179 | [1] | PLUG AS-CONNECTOR (14-PIN) | ||
| 19. | 436-3254 | [1] | BRACKET | |
| 20. | 092-5524 M | [2] | BOLT (M12X1.75X80-MM) | |
| 21. | 130-5300 | [2] | CLIP | |
| 22. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 23. | 174-9692 | [4] | SPACER (20.5X35X16-MM THK) | |
| 24. | 1J-6762 | [4] | BOLT-PLOW (3/4-10X3-IN) | |
| 25. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
| 26. | 223-3490 | [1] | CLIP | |
| 27. | 2J-3506 | [4] | NUT-FULL (3/4-10-THD) | |
| 28. | 4P-7428 | [1] | CLIP (LADDER) | |
| 29. | 4P-7429 | [2] | CLIP (LADDER) | |
| 30. | 4P-7581 | [2] | CLIP (LADDER) | |
| 32. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
| 33. | 6D-4244 | [3] | CLIP (LOOP) | |
| 34. | 6D-4246 | [2] | CLIP (LOOP) | |
| 35. | 6V-1228 | [1] | CLIP | |
| 36. | 7D-1649 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 37. | 8C-6857 | [4] | BOLT (3/4-10X2.75-IN) | |
| 38. | 8M-2773 | [5] | CLIP (LOOP) | |
| 39. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 40. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 41. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 42. | 8T-4137 M | [16] | BOLT (M10X1.5X20-MM) | |
| 43. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 44. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 45. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 46. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 47. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 48. | 8T-4994 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 49. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 50. | 9M-8406 | [2] | CLIP (LOOP) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63910555
380-3060: WIRING GP-GRADE CONTROL
380-3060 WIRING GP-GRADE CONTROL -ACCUGRADE
S/N N9M1-UP
PART OF 462-7928, 462-7929 GRADE CONTROL AR
Type 2
S/N N9M1-UP
PART OF 462-7928, 462-7929 GRADE CONTROL AR
Type 2
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-3033 | [16] | SCREW-SOCKET HEAD (4-40X0.5-IN) | |
| 2. | 7K-1181 C | [28] | STRAP-CABLE | |
| 3. | 127-9323 C | [1] | BRACKET AS | |
| 4. | 132-8487 | [4] | NUT-RING | |
| 5. | 169-5414 | [1] | CLIP | |
| 6. | 236-8826 | [4] | BOSS (1-1/8-18X0.708-IN) | |
| 7. | 251-1133 | [1] | TUBE | |
| 8. | 255-3482 | [1] | BRACKET | |
| 9. | 308-9367 | [1] | HARNESS AS-SWITCH (ROTATION, INCLINATION)(INCLINATION) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 165-0017 G | HOSE (101-IN) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(16-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 368-2369 B | TAPE | |||
| 368-2370 B | TAPE | |||
| 10. | 308-9396 | [2] | BRACKET AS | |
| 11. | 308-9398 | [1] | BRACKET AS | |
| 12. | 308-9399 | [1] | BRACKET AS | |
| 13. | 327-0560 | [1] | BRACKET (RH) | |
| 14. | 327-0561 | [1] | BRACKET (LH) | |
| 15. | 380-3061 | [1] | HARNESS AS-CHASSIS (GRADE CONTROL) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7R-3029 | [4] | CAP-DUST | ||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(115-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 228-3323 | [4] | CLIP-SPRING | ||
| 243-5362 | [1] | CAP-DUST | ||
| 359-5179 | [1] | PLUG AS-CONNECTOR (14-PIN) | ||
| 16. | 436-3254 | [1] | BRACKET | |
| 17. | 448-1893 C | [1] | BRACKET AS | |
| 18. | 448-1938 CY | [1] | HARNESS AS-SENSOR (INCLINATION) | |
| 19. | 474-5410 CY | [1] | HARNESS AS-SENSOR (ROTATION SENSOR) | |
| 20. | 111-9251 C | [4] | WASHER-HARD (20X35X1.6-MM THK) | |
| 21. | 130-5300 | [2] | CLIP | |
| 22. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 23. | 174-9692 | [4] | SPACER (20.5X35X16-MM THK) | |
| 24. | 1J-6762 | [4] | BOLT-PLOW (3/4-10X3-IN) | |
| 25. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
| 26. | 223-3490 | [1] | CLIP | |
| 27. | 2J-3506 | [4] | NUT-FULL (3/4-10-THD) | |
| 28. | 329-3356 CM | [1] | NUT (M12X1.75-THD) | |
| 29. | 344-5675 CM | [1] | NUT (M10X1.5-THD) | |
| 30. | 4P-7581 C | [4] | CLIP (LADDER) | |
| 31. | 4S-1962 C | [3] | CLIP (LOOP) | |
| 32. | 5K-3294 C | [1] | CLIP (SLOT) | |
| 33. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
| 34. | 6D-4246 | [2] | CLIP (LOOP) | |
| 35. | 6V-1228 | [1] | CLIP | |
| 36. | 7D-1649 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 37. | 8C-6857 | [4] | BOLT (3/4-10X2.75-IN) | |
| 38. | 8M-2770 C | [5] | CLIP (LOOP) | |
| 39. | 8M-2773 | [5] | CLIP (LOOP) | |
| 40. | 8T-4121 C | [21] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 42. | 8T-4136 CM | [6] | BOLT (M10X1.5X25-MM) | |
| 43. | 8T-4137 M | [16] | BOLT (M10X1.5X20-MM) | |
| 44. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 45. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 46. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 47. | 8T-4223 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 48. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 49. | 9C-5344 | [2] | SPACER (10.5X20X18-MM THK) | |
| 50. | 9G-7101 | [1] | SPACER (11X20X30-MM THK) | |
| 51. | 7X-7729 | [5] | WASHER (11X25X3-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63910556
380-3060: WIRING GP-GRADE CONTROL
380-3060 WIRING GP-GRADE CONTROL -ACCUGRADE
S/N N9M1-UP
PART OF 462-7928, 462-7929 GRADE CONTROL AR
Type 3
S/N N9M1-UP
PART OF 462-7928, 462-7929 GRADE CONTROL AR
Type 3
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 107-1716 C | [16] | SCREW (4-1/2-40X0.63-IN) | |
| 2. | 7K-1181 | [28] | STRAP-CABLE | |
| 3. | 127-9323 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 132-8487 | [4] | NUT-RING | |
| 5. | 169-5414 | [1] | CLIP | |
| 6. | 236-8826 | [4] | BOSS (1-1/8-18X0.708-IN) | |
| 7. | 251-1133 | [1] | TUBE | |
| 8. | 255-3482 | [1] | BRACKET | |
| 9. | 308-9367 Y | [1] | HARNESS AS-SWITCH (ROTATION, INCLINATION) | |
| 10. | 308-9396 | [2] | BRACKET AS | |
| 11. | 511-2430 C | [1] | BRACKET AS (LH) | |
| 7T-1099 | [1] | LINK | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 12. | 511-2431 C | [1] | BRACKET AS (RH) | |
| 13. | 327-0560 | [1] | BRACKET (RH) | |
| 14. | 327-0561 | [1] | BRACKET (LH) | |
| 15. | 380-3061 Y | [1] | HARNESS AS-CHASSIS (GRADE CONTROL) | |
| 16. | 436-3254 | [1] | BRACKET | |
| 17. | 448-1893 | [1] | BRACKET AS | |
| 18. | 448-1938 Y | [1] | HARNESS AS-SENSOR (INCLINATION) | |
| 19. | 474-5410 Y | [1] | HARNESS AS-SENSOR (ROTATION SENSOR) | |
| 20. | 111-9251 | [4] | WASHER-HARD (20X35X1.6-MM THK) | |
| 21. | 130-5300 | [2] | CLIP | |
| 22. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 23. | 174-9692 | [4] | SPACER (20.5X35X16-MM THK) | |
| 24. | 1J-6762 | [4] | BOLT-PLOW (3/4-10X3-IN) | |
| 25. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
| 26. | 223-3490 | [1] | CLIP | |
| 27. | 2J-3506 | [4] | NUT-FULL (3/4-10-THD) | |
| 28. | 329-3356 M | [1] | NUT (M12X1.75-THD) | |
| 29. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 30. | 4P-7581 | [4] | CLIP (LADDER) | |
| 31. | 4S-1962 | [3] | CLIP (LOOP) | |
| 32. | 5K-3294 | [1] | CLIP (SLOT) | |
| 33. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
| 34. | 6D-4246 | [2] | CLIP (LOOP) | |
| 35. | 6V-1228 | [1] | CLIP | |
| 36. | 7D-1649 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 37. | 8C-6857 | [4] | BOLT (3/4-10X2.75-IN) | |
| 38. | 8M-2770 | [5] | CLIP (LOOP) | |
| 39. | 8M-2773 | [5] | CLIP (LOOP) | |
| 40. | 8T-4121 C | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 42. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| 43. | 8T-4137 CM | [16] | BOLT (M10X1.5X20-MM) | |
| 44. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 45. | 8T-0558 M | [4] | BOLT-SELF-LOCKING (M12X1.75X50-MM) | |
| 46. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 47. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 48. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 49. | 9C-5344 | [2] | SPACER (10.5X20X18-MM THK) | |
| 50. | 9G-7101 | [1] | SPACER (11X20X30-MM THK) | |
| 51. | 7X-7729 | [7] | WASHER (11X25X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63910557
360-5872: WIRING GP-MONITOR
360-5872 WIRING GP-MONITOR -ACCUGRADE
S/N N9M1-UP
S/N N9M1-UP
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 222-9151 | [2] | WASHER-HARD (11X32X5-MM THK) | |
| 3. | 245-8334 | [2] | KNOB | |
| 4. | 252-5190 | [1] | HARNESS AS-FRONT CHASSIS | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 248-5358 | [1] | PLUG AS-CONNECTOR (39-PIN) | ||
| 5. | 273-5924 | [1] | KNOB | |
| 6. | 295-8369 | [1] | PLATE | |
| 7. | 295-8370 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 9X-2032 M | [4] | NUT-WELD (M4X0.7-THD) | ||
| 8. | 295-8381 | [1] | PLATE AS | |
| 9. | 296-1067 | [1] | HARNESS AS-WIRING (LIGHT BAR) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 230-5008 | [3] | PLUG AS-CONNECTOR (4-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7031 | [1] | SEAL-CONNECTOR | ||
| 10. | 300-7909 | [1] | BRACKET AS | |
| 205-7047 M | [2] | INSERT-THREADED (M4X0.7-THD) | ||
| 11. | 314-2820 | [1] | HARNESS AS-RADIO | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 167-8987 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 12. | 357-2272 | [1] | BRACKET AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 13. | 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | |
| 14. | 096-6166 | [6] | WASHER-HARD (4.5X9X1-MM THK) | |
| 15. | 116-6952 M | [6] | BOLT (M4X0.7X10-MM) | |
| 16. | 117-8929 | [1] | WASHER (6.6X22X2-MM THK) | |
| 17. | 130-5300 | [2] | CLIP | |
| 18. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| 19. | 3B-4504 | [4] | LOCKWASHER | |
| 20. | 3B-4610 | [2] | PIN-COTTER | |
| 21. | 5P-6419 | [1] | GROMMET | |
| 22. | 6B-8193 | [2] | PIN-CLEVIS | |
| 23. | 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | |
| 24. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 25. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 9X-1046 M | [6] | SCREW (M4X0.7X18-MM) | |
| 27. | 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 28. | 5P-7657 D | [3] | SEAL (0.3-M) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63910558
558-6506: WIRING GP-MONITOR
558-6506 WIRING GP-MONITOR
S/N N9M1-UP
S/N N9M1-UP
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 273-5924 | [1] | KNOB | |
| 3. | 490-6042 | [1] | CAP AS-CONNECTOR | |
| 4. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| 5. | 352-3964 | [1] | CLIP (LADDER) | |
| 6. | 510-4915 Y | [1] | HARNESS AS-MONITOR (DISPLAY) | |
| 7. | 522-6004 Y | [1] | HARNESS AS-CONTROL (GRADE CONTROL) | |
| 8. | 558-6507 | [1] | PLATE AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 9. | 559-8181 | [1] | PLATE AS | |
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 10. | 559-8183 | [1] | PLATE AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 11. | [1] | PLATE-MOUNTING | ||
| 12. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 14. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 15. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 16. | 9X-2038 | [6] | WASHER (7X19X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63910559
380-3010: WIRING GP-REAR
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 7K-1181 | [72] | STRAP-CABLE | |
| 3. | 7W-5672 | [1] | PIPE | |
| 4. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 5. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 6. | 144-4613 | [1] | ANGLE AS | |
| 7. | 166-0690 | [1] | BLOCK AS-MOUNTING | |
| 8. | 204-2281 | [15] | STRAP-CABLE | |
| 9. | 243-1353 | [1] | SPACER (11X20X35-MM THK) | |
| 10. | 251-3265 | [1] | LINK AS | |
| 6F-0612 | [1] | NUT-JAM (1/4-28-THD) | ||
| 8S-7048 | [1] | ROD END | ||
| 9L-3334 | [1] | NUT-PLATED (1/4-28-THD, LH) | ||
| 036-7232 | [1] | ROD END | ||
| 11. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN) | |
| 12. | 258-8949 | [2] | SPACER (7.5X12X56-MM THK) | |
| 13. | 279-9658 | [1] | LEVER | |
| 14. | 319-5112 | [1] | PLATE AS | |
| 9R-2821 M | [2] | BOSS (M10X1.5X15-MM) | ||
| 15. | 319-5114 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 16. | 319-5123 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 17. | 319-5128 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 18. | 319-5153 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 19. | 320-3063 | [1] | SENSOR GP-PRESSURE (AIR RESTRICTION) | |
| 20. | 326-4516 | [6] | TIE-CABLE | |
| 21. | 340-8158 Y | [1] | CONTROL GP-ENGINE ELECTRONIC (AIR COOLING) | |
| 22. | 344-7391 | [2] | SENSOR-PRESSURE (EJECTOR)(BRAKE CHARGE) | |
| 23. | 347-1843 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | ||
| 24. | 353-4515 | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 25. | 359-9171 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 26. | 359-9172 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST OUTLET) | |
| 27. | 360-2059 | [1] | BRACKET | |
| 28. | 373-4328 | [1] | SENSOR GP-POSITION (ROTARY) | |
| 29. | 374-8776 | [1] | PLATE | |
| 30. | 380-3012 | [1] | HARNESS AS-REAR | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2L-8076 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 235-2765 E | CONDUIT-FLEXIBLE (27.6-MM ID)(45-CM) | |||
| 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 359-5179 | [1] | PLUG AS-CONNECTOR (14-PIN) | ||
| 8T-8737 | [31] | PLUG-SEAL | ||
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 361-2944 | [2] | PLUG AS-CONNECTOR | ||
| 274-8267 | [2] | PLUG (4-GA) | ||
| 8T-8730 | [28] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 311-4859 E | TUBE-HEAT SHRINK (48-MM DIA)(16-CM) | |||
| 240-7193 | [1] | RESISTOR AS (500-OHM, 2-WATT) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 31. | 380-3013 | [1] | HARNESS AS-SENSOR | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4013 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 32. | 380-3014 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 33. | 380-3036 | [1] | HARNESS AS-SENSOR | |
| 374-7463 | [1] | CAP-SEAL | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 177-9656 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [17] | PLUG-SEAL | ||
| 167-3692 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 7T-0094 | [4] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8730 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 310-0674 | [1] | LOCKWASHER | ||
| 34. | 380-3017 | [1] | COVER | |
| 35. | 380-3024 | [1] | HARNESS AS-AUXILIARY | |
| 9X-3401 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [16] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-3402 | [17] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [17] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM) | |||
| 310-0674 | [1] | LOCKWASHER | ||
| 366-8294 | [1] | PLUG AS (CONNECTOR) | ||
| 379-5103 | [8] | SOCKET-CONNECTOR (17-GA TO 20-GA) | ||
| 379-5112 | [11] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [16] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 272-2840 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 185-1861 | [11] | SEAL-WIRE | ||
| 380-5860 | [2] | SEAL-WIRE | ||
| 380-8868 | [8] | SEAL-WIRE | ||
| 317-1204 E | SLEEVE (27-CM) | |||
| 379-5114 | [16] | SOCKET-CONNECTOR (18-GA TO 20-GA) | ||
| 378-6626 | [2] | SOCKET-TERMINAL (17-GA TO 20-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 382-3077 | [1] | BOOT (1-PIN) | ||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 240-7874 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 240-7876 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 240-7877 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 240-7878 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 378-5571 | [1] | PLUG AS (CONNECTOR) | ||
| 379-5104 | [1] | PLUG AS | ||
| 379-5105 | [1] | PLUG AS | ||
| 36. | 380-3028 | [1] | HARNESS AS-REAR | |
| 174-0503 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2255 | [3] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS , WEDGE & INTERFACE SEAL) | ||||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 7K-1181 | [6] | STRAP-CABLE | ||
| 2L-8052 | [2] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [2] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [3] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 368-2370 B | TAPE | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(200-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 140-1809 E | TUBE-HEAT SHRINK (76.2-MM DIA)(24-CM) | |||
| 311-2812 | [1] | PLUG-CONNECTOR | ||
| 8T-8737 | [289] | PLUG-SEAL | ||
| 134-2540 | [2] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 324-6267 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 274-3781 | [1] | CAP-SEAL | ||
| 7T-0094 | [7] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8730 | [218] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [42] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [96] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 160-7689 | [2] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 167-3693 | [2] | PLUG AS-CONNECTOR (31-PIN) | ||
| 213-0141 | [1] | CONNECTOR (1-PIN) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 241-8834 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 237-0336 | [1] | COVER (CONNECTOR) | ||
| 368-2370 B | TAPE | |||
| 382-3077 | [1] | BOOT (1-PIN) | ||
| 335-8954 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 382-3077 | [1] | BOOT (1-PIN) | ||
| 274-3774 | [3] | CAP-CONNECTOR | ||
| 274-3775 | [1] | CAP-CONNECTOR | ||
| 233-9494 E | CONDUIT (47-MM OD)(45-CM) | |||
| 213-0142 | [1] | CONNECTOR | ||
| 126-1774 | [3] | COVER-CONNECTOR | ||
| 8T-8729 | [19] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 37. | 396-6500 Y | [1] | CONTROL GP-ELECTRONIC (VOLTAGE, LOAD PROTECTION, 24-VOLT) | |
| 39. | 091-0081 | [6] | SPACER (10.5X20X10-MM THK) | |
| 40. | 130-5300 | [9] | CLIP | |
| 41. | 132-5789 | [11] | CLIP (LADDER) | |
| 42. | 133-6934 | [2] | SPACER (11X20X25-MM THK) | |
| 43. | 134-3355 | [1] | STRAP AS | |
| 44. | 1F-7854 | [1] | SPACER (11.01X19.05X49.21-MM THK) | |
| 45. | 204-8000 | [15] | MOUNTING-CABLE TIE | |
| 46. | 228-7100 | [1] | SEAL-O-RING | |
| 47. | 237-9960 | [1] | CLIP (LADDER) | |
| 48. | 242-1583 M | [1] | STUD (M10X1.5X75-MM) | |
| 49. | 277-1873 | [2] | CLIP (LADDER) | |
| 50. | 294-3313 | [1] | CLIP (LADDER) | |
| 51. | 2F-7888 | [2] | SCREW-MACHINE (10-32X1.25-IN) | |
| 52. | 2K-5232 | [1] | SPACER (0.406X0.75X1.81-IN THK) | |
| 53. | 309-1905 M | [1] | STUD-TAPERLOCK (M10X1.5X100-MM) | |
| 54. | 309-4314 | [2] | CLIP (LADDER) | |
| 55. | 342-2135 | [1] | CLIP (LOOP) | |
| 56. | 352-3968 | [2] | CLIP (LADDER) | |
| 57. | 3B-4619 | [1] | PIN-COTTER | |
| 58. | 3J-1907 | [2] | SEAL-O-RING | |
| 59. | 3K-0360 | [1] | SEAL-O-RING | |
| 60. | 3S-2093 | [11] | STRAP-CABLE | |
| 61. | 421-5575 | [1] | LAMP GP-INDICATOR (24-VOLT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9X-1386 E | SLEEVE (29-CM) | |||
| 5P-5677 H | WIRE (18-GA, BLACK)(8-DM) | |||
| 62. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 63. | 4D-7388 | [2] | CLIP (LOOP) | |
| 64. | 4D-7735 | [1] | CLIP | |
| 65. | 4P-7581 | [18] | CLIP (LADDER) | |
| 66. | 4P-8134 | [1] | CLIP (LADDER) | |
| 67. | 4S-4455 | [2] | CLIP | |
| 68. | 5P-7648 | [1] | GROMMET | |
| 69. | 5P-9297 | [2] | CLIP (LOOP) | |
| 70. | 6D-3479 | [2] | CLIP (LOOP) | |
| 71. | 6D-4244 | [3] | CLIP (LOOP) | |
| 72. | 6D-4636 | [1] | CLIP (LOOP) | |
| 73. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 74. | 6V-0894 | [1] | SEAL-O-RING | |
| 75. | 6V-1249 | [2] | GROMMET (22-MM ID) | |
| 76. | 6V-1581 | [1] | CLIP (SLOT) | |
| 77. | 6V-1582 | [1] | CLIP (TAB) | |
| 78. | 6V-1889 | [1] | CLIP (LOOP) | |
| 79. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 80. | 6V-7728 M | [2] | BOLT (M6X1X45-MM) | |
| 81. | 6V-8225 M | [1] | NUT (M6X1-THD) | |
| 82. | 6W-6672 | [4] | SPACER (10.5X20X38-MM THK) | |
| 83. | 7G-3228 | [1] | GROMMET | |
| 85. | 7X-0579 | [7] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 86. | 7X-0818 M | [4] | BOLT (M8X1.25X45-MM) | |
| 87. | 8C-3793 | [2] | BOLT (1/4-20X3.75-IN) | |
| 88. | 8T-4121 | [68] | WASHER-HARD (11X21X2.5-MM THK) | |
| 89. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 90. | 8T-4136 M | [15] | BOLT (M10X1.5X25-MM) | |
| 91. | 8T-4137 M | [28] | BOLT (M10X1.5X20-MM) | |
| 92. | 8T-4172 M | [3] | BOLT (M10X1.5X80-MM) | |
| 93. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 94. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 95. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 96. | 8T-4195 M | [7] | BOLT (M10X1.5X30-MM) | |
| 97. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 98. | 099-3649 M | [4] | BOLT (M8X1.25X40-MM) | |
| 99. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 100. | 8T-4224 | [9] | WASHER-HARD (8.8X16X2-MM THK) | |
| 101. | 8T-4908 M | [5] | BOLT (M8X1.25X25-MM) | |
| 102. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| 103. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 104. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 105. | 9G-7101 | [1] | SPACER (11X20X30-MM THK) | |
| 106. | 9X-8250 | [1] | CLIP (LOOP) | |
| 108. | 9X-2038 | [6] | WASHER (7X19X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| H | SOLD BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
