AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

189-8627 VALVE GP-SOLENOID S/N N9M1-UP 24-VOLT PART OF 446-7623, 481-6651 MANIFOLD GP-CONTROL 140M 3


HYDRAULIC SYSTEM
VALVE GP-SOLENOID
VALVE GP-STEERING
IMPLEMENTS
CIRCLE GP
DRAWBAR GP
MOLDBOARD GP
OPERATOR STATION
AIR CONDITIONER GP

MOTOR GRADER 140M 3 MOTOR GRADER N9M
 140M Series 3 Motor Grader N9M00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP6391 140M 3 N9M   (2013)

HYDRAULIC SYSTEM

VALVE GP-SOLENOID
MANIFOLD GP-CONTROL
385-8162 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
446-7623 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
481-6651 MANIFOLD GP-CONTROL
VALVE GP-SHUTOFF
382-2790 VALVE GP-SHUTOFF
VALVE GP-SOLENOID
189-8627 VALVE GP-SOLENOID
VALVE GP-SOLENOID
251-3268 VALVE GP-SOLENOID
VALVE GP-SOLENOID
278-1799 VALVE GP-SOLENOID
 

#SEBP63910960
 

189-8627: VALVE GP-SOLENOID

189-8627 VALVE GP-SOLENOID
S/N N9M1-UP
24-VOLT
PART OF 446-7623, 481-6651 MANIFOLD GP-CONTROL
i01614982 SEBP6391
1898627 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 140M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 312-8629 [1] COIL AS (24-VOLT)  
2. 191-9247 [1] WASHER (19.15X31.65X2.36-MM THK)  
3. 198-2914 [1] NUT (3/4-32-THD)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

#SEBP63910961
 

251-3268: VALVE GP-SOLENOID

251-3268 VALVE GP-SOLENOID
S/N N9M1-UP
24-VOLT
PART OF 446-7623, 481-6651 MANIFOLD GP-CONTROL, 361-5941 VALVE GP-SOLENOID
i04124869 SEBP6391
2513268 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 140M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 384-8750 [1] COIL AS (24-VOLT)  
   
    AVAILABLE REPAIR KIT(S):
  332-5669 [1] KIT-SEAL (SOLENOID VALVE)  
    (INCLUDES O-RING SEALS & BACKUP RINGS)`
 

#SEBP63910962
 

278-1799: VALVE GP-SOLENOID

278-1799 VALVE GP-SOLENOID
S/N N9M1-UP
PART OF 487-3027 VALVE GP-BANK 3, 487-3028 VALVE GP-BANK 4, 487-3013, 487-3029 VALVE GP-BANK 5, 487-3014, 487-3015, 487-3030, 487-3031 VALVE GP-BANK 6, 487-3016, 487-3017 VALVE GP-BANK 7, 487-3018 VALVE GP-BANK 8, 366-6686, 366-6692, 371-6093, 380-1747, 382-3290, 382-3294, 382-3295, 382-3296, 382-3297, 382-3298, 382-3299, 382-3300, 382-3301, 382-3305, 382-3316, 382-3323, 488-7009 VALVE GP-CONTROL
i02558898 SEBP6391
2781799 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 140M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-6711 [1] NUT-RETAINER (1/2-20-THD)  
2. 226-9622 [1] COIL AS-SOLENOID (24-VOLT)  
3. 4K-2039 [1] SEAL-O-RING  
4. 5L-4758 [1] SEAL-O-RING  
5. 6F-4855 [1] SEAL-O-RING  
 

#SEBP63910963
 

366-6680: VALVE GP-STEERING

366-6680 VALVE GP-STEERING
S/N N9M1-UP
PART OF 393-6071 LINES GP-STEERING
i05459697 SEBP6391
3666680 VALVE GP-STEERING Parts scheme
  For full view, you need register

Parts for your 140M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4198 M [3] BOLT (M10X1.5X100-MM)  
2. 366-6686 Y [1] VALVE GP-CONTROL (STEERING PRIORITY)  
3. 366-6692 Y [1] VALVE GP-CONTROL (STEERING)  
4. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP63910964
 

243-6660: CIRCLE GP

243-6660 CIRCLE GP
S/N N9M1-UP
PART OF 370-2224 SPECIAL AR
i02286789 SEBP6391
2436660 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 140M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 190-0627 B [6] SHIM (2-MM THK)  
2. 243-6650 [1] CIRCLE AS  
3. 243-6652 [4] COVER  
4. 446-1526 [2] STRIP-WEAR  
5. 276-1318 [2] STRIP-WEAR  
6. 276-1319 [2] STRIP-WEAR  
7. 252-7086 Y [1] MOUNTING GP-BLADE  
8. 253-4645 [2] SHAFT  
9. 253-4646 [2] PLATE AS  
10. 265-6722 [4] COVER  
11. 095-1235 M [4] NUT-CASTLE (M42X4.5-THD)  
12. 095-0865 [4] PIN-COTTER  
13. 285-6124 [16] WASHER-HARD (16X35X5-MM THK)  
14. 285-6125 M [16] BOLT (M14X2-THD)  
15. 6V-7688 M [6] LOCKNUT (M20X2.5-THD)  
16. 7X-7740 [4] WASHER (45X78X8-MM THK)  
17. 129-2220 M [6] SETSCREW-SOCKET (M20X2.5X80-MM)  
18. 467-5183 [8] BUSHING  
19. 283-1578 [4] WASHER-HARD (22X45X10-MM THK)  
20. 466-1604 [2] SPACER  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP63910965
 

243-6660: CIRCLE GP

243-6660 CIRCLE GP
S/N N9M1-575
PART OF 370-2224 SPECIAL AR
i07711241 SEBP6391
2436660 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 140M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 190-0627 B [6] SHIM (2-MM THK)  
2. 243-6650 [1] CIRCLE AS  
3. 243-6652 [4] COVER  
4. 446-1526 [2] STRIP-WEAR  
5. 276-1318 [2] STRIP-WEAR  
6. 276-1319 [2] STRIP-WEAR  
7. 558-2398 C [1] MOUNTING GP-BLADE  
8. 253-4645 [2] SHAFT  
9. 253-4646 [2] PLATE AS  
10. 265-6722 [4] COVER  
11. 095-1235 M [4] NUT-CASTLE (M42X4.5-THD)  
12. 095-0865 [4] PIN-COTTER  
13. 285-6124 [16] WASHER-HARD (16X35X5-MM THK)  
14. 285-6125 M [16] BOLT (M14X2-THD)  
15. 6V-7688 M [6] LOCKNUT (M20X2.5-THD)  
16. 7X-7740 [4] WASHER (45X78X8-MM THK)  
17. 129-2220 M [6] SETSCREW-SOCKET (M20X2.5X80-MM)  
18. 467-5183 [8] BUSHING  
19. 283-1578 [4] WASHER-HARD (22X45X10-MM THK)  
20. 466-1604 [2] SPACER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP63910966
 

243-6660: CIRCLE GP

243-6660 CIRCLE GP
S/N N9M576-UP
PART OF 370-2224 SPECIAL AR
i07711246 SEBP6391
2436660 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 140M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4648 CM [2] BOLT (M12X1.75X70-MM)  
2. 129-2220 M [6] SETSCREW-SOCKET (M20X2.5X80-MM)  
3. 190-0627 BC [22] SHIM (2-MM THK)  
4. 243-6650 [1] CIRCLE AS  
5. 243-6652 [4] COVER  
6. 253-4646 [2] PLATE AS  
7. 265-6722 [4] COVER  
8. 276-1318 [2] STRIP-WEAR  
9. 276-1319 [2] STRIP-WEAR  
10. 283-1578 [4] WASHER-HARD (22X45X10-MM THK)  
11. 285-6124 [16] WASHER-HARD (16X35X5-MM THK)  
12. 285-6125 M [16] BOLT (M14X2-THD)  
13. 3B-8489 C [2] FITTING-GREASE (1/8-27 PTF)  
14. 446-1526 [2] STRIP-WEAR  
15. 466-1604 [2] SPACER  
16. 467-5183 [8] BUSHING  
17. 526-6468 C [2] PIN  
18. 526-6469 C [2] COLLAR  
19. 558-2398 [1] MOUNTING GP-BLADE  
20. 6V-7687 CM [2] LOCKNUT (M12X1.75-THD)  
21. 6V-7688 M [6] LOCKNUT (M20X2.5-THD)  
22. 7X-0584 C [2] WASHER-HARD (13.5X20.5X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP63910967
 

253-4630: DRAWBAR GP

253-4630 DRAWBAR GP
S/N N9M1-UP
PART OF 370-2224 SPECIAL AR
i02248418 SEBP6391
2534630 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 140M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-5119 [12] NUT (3/4-10-THD)  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 6G-5442 [1] BALL  
4. 6K-6444 [2] SPACER  
5. 7J-8782 [3] PLUG  
6. 333-0960 [6] STRIP-WEAR  
7. 201-8034 M [18] BOLT (M20X2.5X120-MM)  
8. 312-0780 [6] SHOE-CIRCLE GUIDE  
9. 253-4651 [1] DRAWBAR & YOKE AS  
9A. 178-3086 [3] STUD-BALL  
9B. 243-1786 [1] SHAFT AS  
9C. 243-6658 [1] PLATE  
9D. 243-6659 [1] PLATE  
9E. 285-4247 [1] PLATE  
9F. 285-4265 [1] PLATE  
9G. 178-7023 M [4] BOSS (M10X1.5X30-MM)  
9H. 7Y-6338 M [2] BOSS (M10X1.5X70-MM)  
9J. 8Y-3795 M [1] BOSS (M10X1.5X39-MM)  
9K. 9R-2672 M [7] BOSS-THREADED (M10X1.5X120-MM)  
9L. 9R-9866 M [2] BOSS-THREADED (M10X1.5-THD)  
10. 302-6338 [6] STRIP-WEAR  
11. 302-6337 B [6] SHIM (10-MM THK)  
12. 302-6335 B [12] SHIM (0.25-MM THK)  
  302-6336 B [42] SHIM (0.5-MM THK)  
14. 261-4672 [1] CAP (DRAWBAR)  
15. 261-4673 [1] ADAPTER  
16. 261-4674 B [4] SHIM (0.8-MM THK)  
  261-4675 B [6] SHIM (0.25-MM THK)  
  261-4676 B [1] SHIM (0.12-MM THK)  
19. 342-7352 [4] COVER  
20. 342-7353 [1] COVER  
21. 342-7351 [1] COVER  
22. 283-1578 [20] WASHER-HARD (22X45X10-MM THK)  
23. 288-3678 M [14] BOLT (M20X2.5X45-MM)  
24. 3E-5001 [2] PIN-SPRING  
25. 147-5112 M [4] BOLT (M24X3X150-MM)  
26. 550-3302 M [2] BOLT-HEAD (M20X2.5X80-MM)  
27. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
28. 8T-4123 [18] WASHER (22X35X3.5-MM THK)  
29. 483-0424 M [4] LOCKNUT (M20X2.5-THD)  
30. 287-5701 M [2] BOLT (M20X2.5X50-MM)  
31. 289-0580 [12] SETSCREW (3/4-10X2.5-IN)  
32. 5P-8291 [5] BOLT (3/4-16X2-IN)  
33. 6V-8653 M [2] BOLT-SOCKET HEAD (M6X1X40-MM)  
   
  302-6335 BFJ [24] SHIM (0.25-MM THK)  
  302-6336 BFJ [60] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   LOCATED IN THE TOOLBOX
  M   METRIC PART
 

#SEBP63910968
 

525-5599: MOLDBOARD AS

525-5599 MOLDBOARD AS
S/N N9M1-UP
3.66-M (12-FT)
PART OF 517-7339, 517-7340, 517-7341, 517-7342, 517-7343, 517-7344, 517-7345, 517-7346, 517-7347, 517-7348 BLADE & MTG GP-SNOW
i07103369 SEBP6391
5255599 MOLDBOARD AS Parts scheme
  For full view, you need register

Parts for your 140M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-3033 [2] EDGE-CUTTING  
2. 525-5598 [1] BUMPER  
3. 5J-4773 [26] BOLT-PLOW (3/4-10X2.5-IN)  
4. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
5. 2J-3506 [26] NUT-FULL (3/4-10-THD)  
6. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
7. 5P-8248 [26] WASHER-HARD (20X36.5X3.5-MM THK)  
8. 456-6896 [4] WASHER (63.5X114.3X15.875-MM THK)  
9. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP63910969
 

387-8752: AIR CONDITIONER & MOUNTING GP

387-8752 AIR CONDITIONER & MOUNTING GP
S/N N9M1-UP
PART OF 361-3133 AIR CONDITIONER GP
i04859491 SEBP6391
3878752 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 140M 3 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 249-0410 [2] GASKET  
2. 249-0411 [1] GASKET  
3. 249-0937 [1] DUCT  
4. 265-7454 [1] GASKET  
5. 285-8055 Y [1] AIR CONDITIONER GP  
6. 387-8731 [2] SPACER  
7. 118-5619 [2] SCREW-FLAT HEAD (6-20X1-IN)  
8. 145-6669 [2] SCREW-SELF-TAPPING (10X0.75-IN)  
9. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
11. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
12. 5P-5637 D SEAL (0.5-M)  
13. 5P-5643 D SEAL (0.5-M)  
14. 5P-5927 D SEAL (1.3-M)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 140M 3 :

VALVE GP-SHUTOFF
382-2790 VALVE GP-SHUTOFF
VALVE GP-RELIEF
133-5330 VALVE GP-RELIEF
VALVE GP-PRESSURE REDUCING
252-8038 VALVE GP-PRESSURE REDUCING
105-8117 VALVE GP-COUNTERBALANCE
VALVE GP-CONTROL
488-7009 VALVE GP-CONTROL
VALVE GP-CONTROL
382-3323 VALVE GP-CONTROL
VALVE GP-CONTROL
382-3316 VALVE GP-CONTROL
VALVE GP-CONTROL
382-3305 VALVE GP-CONTROL
VALVE GP-SOLENOID
251-3268 VALVE GP-SOLENOID
VALVE GP-SOLENOID
278-1799 VALVE GP-SOLENOID
VALVE GP-STEERING
366-6680 VALVE GP-STEERING
CIRCLE GP
243-6660 CIRCLE GP
CIRCLE GP
243-6660 CIRCLE GP
CIRCLE GP
243-6660 CIRCLE GP
DRAWBAR GP
253-4630 DRAWBAR GP
MOLDBOARD AS
525-5599 MOLDBOARD AS

Truck sale:

Caterpillar 140M 3
 
Caterpillar 140M 3
- motor graders
WYOMING MACHINERY
Caterpillar 140M3
 
Caterpillar 140M3
- motor graders
FINNING CANADA
Caterpillar 140M 3, motor graders, Construction
244,128 
Caterpillar 140M 3, motor graders, Construction
- motor graders
WYOMING MACHINERY
Caterpillar 140M3, motor graders, Construction
350,000 
Caterpillar 140M3, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Caterpillar 140M3, motor graders, Construction
305,000 
Caterpillar 140M3, motor graders, Construction
- motor graders
QUINN COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.