OPERATOR STATION
FAN GPSEAT GP
INSTALLATION GP-CONTROLS
DOOR GP
CAB GP
AIR CONDITIONER GP
HEATER GP
OPERATOR STATION
FAN GP
#SEBP63911050
233-3137: FAN GP-CIRCULATING
233-3137 FAN GP-CIRCULATING -DEFROSTER
S/N N9M1-UP
WITH SWITCH
PART OF 397-7457, 397-7458, 541-4987, 541-4988, 541-4989, 541-4990, 541-4991, 541-4992, 541-4993, 541-4994, 541-4995, 541-4996, 541-4997, 541-4998, 541-4999, 541-5000, 541-5001, 541-5002, 541-5003, 541-5004, 541-5005, 541-5006, 541-5007, 541-5009, 542-8771, 542-8772 CAB AR
S/N N9M1-UP
WITH SWITCH
PART OF 397-7457, 397-7458, 541-4987, 541-4988, 541-4989, 541-4990, 541-4991, 541-4992, 541-4993, 541-4994, 541-4995, 541-4996, 541-4997, 541-4998, 541-4999, 541-5000, 541-5001, 541-5002, 541-5003, 541-5004, 541-5005, 541-5006, 541-5007, 541-5009, 542-8771, 542-8772 CAB AR
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4003 | [1] | RESISTOR | |
| 2. | 170-5334 Y | [1] | FAN GP-CIRCULATING (FRONT DEFROSTER) | |
| 3. | 367-5211 | [1] | SWITCH AS-ROCKER (24-VOLT)(FAN BLOWER SPEED) | |
| 4. | 154-8079 C | [2] | NUT-RETAINER | |
| 5. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 6. | 213-7315 CM | [2] | SCREW-TRUSS HEAD (M4X0.7X25-MM) | |
| 7. | 5P-8441 | [1] | GROMMET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63911051
174-2231: HOUSING GP-SEAT SUSPENSION
174-2231 HOUSING GP-SEAT SUSPENSION
S/N N9M1-UP
PART OF 160-7165 SUSPENSION GP-SEAT
S/N N9M1-UP
PART OF 160-7165 SUSPENSION GP-SEAT
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Y-7927 | [1] | PIN | |
| 2. | 2D-6235 | [2] | LOCKNUT (1/4-20-THD) | |
| 3. | 2M-7819 | [4] | RING-RETAINING | |
| 4. | 3D-2975 | [2] | RING-RETAINING | |
| 5. | 4B-5059 | [6] | WASHER (15X29.5X2.5-MM THK) | |
| 6. | 4N-2927 | [2] | RACE-THRUST BEARING | |
| 7. | 5D-4822 | [2] | RING-RETAINING | |
| 8. | 5P-8445 | [4] | RING-RETAINING | |
| 9. | 5V-0770 | [2] | BOLT-CARRIAGE (1/4-20X0.74-IN) | |
| 10. | 7M-7219 | [1] | BEARING-THRUST | |
| 11. | 7V-5191 | [2] | SPACER (28X10X7.1-MM THK) | |
| 12. | 8L-8413 | [2] | STRAP-CABLE (WHITE) | |
| 13. | 8S-7803 | [4] | RING-RETAINING | |
| 14. | 8Y-6041 | [1] | ARM AS | |
| 15. | 8Y-6045 | [1] | CAM | |
| 16. | 8Y-6046 | [1] | PIN | |
| 17. | 8Y-6047 | [2] | PIN | |
| 18. | 8Y-6060 | [2] | ROLLER | |
| 19. | 8Y-6062 | [1] | LINK-ACTUATOR (RH) | |
| 20. | 8Y-6063 | [1] | LINK-ACTUATOR (LH) | |
| 21. | 8Y-6064 | [2] | ROLLER-SLIDER | |
| 22. | 8Y-6066 | [1] | SPRING | |
| 23. | 8Y-6067 | [1] | SPACER (10.54-MM THK) | |
| 24. | 8Y-6068 | [1] | NUT (3/8X16-THD) | |
| 25. | 8Y-6069 | [1] | ADJUSTER AS | |
| 26. | 9X-8918 | [3] | SCREW-FLAT HEAD (8-32X0.5-IN) | |
| 27. | 095-0878 | [1] | PIN-SPRING | |
| 28. | 131-4242 | [1] | BOLT (3/8-16X5.18-IN) | |
| 29. | 131-5167 | [1] | KNOB AS-ADJUSTMENT (WEIGHT) | |
| 30. | 161-5967 | [1] | SHAFT | |
| 31. | 174-2237 | [1] | FRAME AS-SUSPENSION | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-5945 | [1] | KIT-SUSPENSION KNOB (HEIGHT ADJUSTMENT) | ||
| (INCLUDES KNOBS) | ||||
| 8Y-6859 | [1] | KIT-SPRING (SUSPENSION SEAT) | ||
| (INCLUDES SPRINGS, BUSHINGS & RINGS) | ||||
| 8Y-6860 | [1] | KIT-SPRING (HEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES SPRINGS, BUSHINGS, RODS & SPACERS) | ||||
| 100-3224 | [1] | KIT-INDICATOR (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES TAPE, GUIDE & STRAPS) | ||||
| 100-5179 | [1] | KIT-BUMPER (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES BUMPERS) | ||||
| 108-4086 | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| (INCLUDES FOLLOWER & PIN) | ||||
| 108-4087 | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| (INCLUDES FOLLOWER & PIN) | ||||
| 108-4103 | [1] | KIT-BEARING (SUSPENSION SEAT) | ||
| (INCLUDES ROLLER ASSEMBLIES) | ||||
#SEBP63911052
463-6258: INSTALLATION GP-CONTROLS
463-6258 INSTALLATION GP-CONTROLS -JOYSTICK
S/N N9M1-UP
S/N N9M1-UP
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 434-2232 Y | [1] | CONTROL GP-JOYSTICK (LH) | ||
| 434-2233 Y | [1] | CONTROL GP-JOYSTICK (RH) | ||
| 438-3108 Y | [1] | HARNESS AS-WIRING (JOYSTICK) | ||
| 458-7887 Y | [1] | HARNESS AS-WIRING (CONSOLE, RH) | ||
| 458-7888 Y | [1] | HARNESS AS-WIRING (YW ADAPTER) | ||
| 457-7811 | [1] | FILM-IDENTIFICATION (GRADE CONTROL) | ||
| 457-7812 | [1] | FILM-IDENTIFICATION (INSTRUCTION) | ||
| 251-2247 | [2] | GROMMET | ||
| 458-7889 | [1] | HARNESS AS-WIRING (ECM) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [14] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63911053
299-1021: LEVER GP-CAB DOOR
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-9345 | [1] | KNOB-CONTROL | |
| 2. | 299-1023 | [1] | BRACKET | |
| 3. | 299-1024 | [1] | LEVER | |
| 4. | 299-1441 | [1] | SPRING | |
| 5. | 299-1442 | [1] | SPRING | |
| 6. | 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | |
| 7. | 8T-7971 | [2] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 8. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| M | METRIC PART | |||
#SEBP63911054
447-2230: LINER GP-CAB
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6389 Y | [1] | LAMP GP-DOME (24-VOLT)(CAB) | |
| 2. | 172-8591 M | [18] | NUT-CLIP (M6X1-THD) | |
| 3. | 5T-1625 | [1] | PLATE AS | |
| 4. | 096-0192 | [3] | LOCKWASHER | |
| 5. | 9R-0932 | [1] | LATCH | |
| 6. | 101-0003 | [2] | FASTENER | |
| 7. | 112-8728 | [3] | SCREW (10-32X1.25-IN) | |
| 8. | 131-5171 | [1] | CLIP | |
| 9. | 250-8335 | [2] | LAMP AS (24-VOLT)(IMPLEMENT CONTROL) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 10. | 330-3862 | [1] | PLATE | |
| 11. | 330-3863 | [1] | FILM-INSTRUCTION (WIPER) | |
| 12. | 330-3864 | [1] | PLATE | |
| 13. | 344-0980 | [1] | PLATE AS | |
| 14. | 361-0423 | [1] | COVER | |
| 15. | 361-0426 | [1] | LINER AS-CAB (LH) | |
| 174-5763 | [6] | CLIP | ||
| 16. | 447-2231 | [1] | LINER AS-CAB | |
| 174-5763 | [10] | CLIP | ||
| 17. | 363-5824 | [1] | PLATE AS | |
| 18. | 114-6658 | [8] | WASHER (6.5X17X1-MM THK) | |
| 19. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 20. | 7X-0579 | [16] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 21. | 9K-5635 | [8] | SCREW-TAPPING (8-18X1-IN) | |
| 22. | 447-8925 | [6] | INSERT-THREADED | |
| 23. | 9X-2045 M | [10] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 24. | 9X-2046 M | [11] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 25. | 8T-5372 D | SEAL (0.6-M) | ||
| 26. | 446-1483 M | [3] | SCREW-TRUSS HEAD (M6X1X45-MM) | |
| 27. | 206-3747 | [3] | SPACER (6.3X12.7X32-MM THK) | |
| 28. | 160-2169 | [2] | SPACER (7X11X8.4-MM THK) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63911055
447-2230: LINER GP-CAB
447-2230 LINER GP-CAB
S/N N9M1-UP
PART OF 361-3140, 387-9586, 387-9587, 555-0543, 555-0544, 555-0545 CAB AR
Type 2
S/N N9M1-UP
PART OF 361-3140, 387-9586, 387-9587, 555-0543, 555-0544, 555-0545 CAB AR
Type 2
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 375-1478 CY | [1] | LAMP GP-DOME (24-VOLT)(CAB) | |
| 2. | 172-8591 M | [18] | NUT-CLIP (M6X1-THD) | |
| 3. | 5T-1625 | [1] | PLATE AS | |
| 4. | 096-0192 | [3] | LOCKWASHER | |
| 5. | 9R-0932 | [1] | LATCH | |
| 6. | 101-0003 | [2] | FASTENER | |
| 7. | 112-8728 | [3] | SCREW (10-32X1.25-IN) | |
| 8. | 131-5171 | [1] | CLIP | |
| 9. | 250-8335 | [2] | LAMP AS (24-VOLT)(IMPLEMENT CONTROL) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 10. | 330-3862 | [1] | PLATE | |
| 11. | 330-3863 | [1] | FILM-INSTRUCTION (WIPER) | |
| 12. | 330-3864 | [1] | PLATE | |
| 13. | 344-0980 | [1] | PLATE AS | |
| 14. | 361-0423 | [1] | COVER | |
| 15. | 361-0426 | [1] | LINER AS-CAB (LH) | |
| 174-5763 | [6] | CLIP | ||
| 16. | 361-0427 | [1] | LINER AS-CAB (RH) | |
| 174-5763 | [10] | CLIP | ||
| 17. | 363-5824 | [1] | PLATE AS | |
| 18. | 114-6658 | [6] | WASHER (6.5X17X1-MM THK) | |
| 19. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 20. | 7X-0579 | [18] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 21. | 9K-5635 | [8] | SCREW-TAPPING (8-18X1-IN) | |
| 22. | 9U-4784 | [6] | INSERT | |
| 23. | 9X-2045 M | [10] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 24. | 9X-2046 M | [11] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 25. | 8T-5372 D | SEAL (0.6-M) | ||
| 26. | 446-1483 M | [3] | SCREW-TRUSS HEAD (M6X1X45-MM) | |
| 27. | 206-3747 | [3] | SPACER (6.3X12.7X32-MM THK) | |
| 28. | 160-2169 | [2] | SPACER (7X11X8.4-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63911056
361-3134: LINES GP-AIR CONDITIONER
361-3134 LINES GP-AIR CONDITIONER
S/N N9M1-UP
PART OF 361-3133 AIR CONDITIONER GP
S/N N9M1-UP
PART OF 361-3133 AIR CONDITIONER GP
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 186-6189 | [1] | ACCUMULATOR-REFRIGERANT | |
| 2. | 250-3528 | [1] | TUBE AS | |
| 3. | 250-3529 | [1] | TUBE AS | |
| 4. | 283-4236 | [1] | DRYER AS-AIR (IN-LINE) | |
| 5. | 260-5807 I | [1] | HOSE AS | |
| 6. | 260-5808 I | [1] | HOSE AS | |
| 7. | 361-3138 | [1] | CLAMP | |
| 8. | 361-3139 | [1] | CLAMP | |
| 9. | 1S-1015 | [1] | CLIP (LOOP) | |
| 10. | 5P-9297 | [1] | CLIP (LOOP) | |
| 11. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 13. | 9M-8406 | [1] | CLIP (LOOP) | |
| 14. | 9X-7380 | [1] | SEAL-O-RING | |
| 15. | 9X-7381 | [2] | SEAL-O-RING | |
| 16. | 9X-7382 | [1] | SEAL-O-RING | |
| 17. | 9X-7383 | [2] | SEAL-O-RING | |
| 18. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 19. | 133-6934 | [1] | SPACER (11X20X25-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP63911057
392-7058: LINES GP-AIR CONDITIONER
392-7058 LINES GP-AIR CONDITIONER
S/N N9M1-550
PART OF 392-7060 HYDRAULIC AR
S/N N9M1-550
PART OF 392-7060 HYDRAULIC AR
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 149-6371 | [1] | SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(COMPRESSOR, LOW SIDE) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 203-2287 | [1] | CLIP | |
| 4. | 326-4516 | [3] | TIE-CABLE | |
| 5. | 348-5390 | [1] | HOSE AS | |
| 6. | 350-3564 | [1] | BRACKET AS | |
| 9R-9866 M | [1] | BOSS-THREADED (M10X1.5-THD) | ||
| 7. | 355-3148 | [1] | SWITCH AS-PRESSURE (HIGH, LOW)(COMPRESSOR, HIGH SIDE) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 372-1956 | [1] | HOSE AS | |
| 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | ||
| 9. | 459-2511 | [1] | HOSE AS | |
| 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | ||
| 10. | 067-2551 | [2] | CLIP | |
| 11. | 178-3336 M | [4] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 12. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 13. | 4S-4456 | [2] | CLIP | |
| 14. | 6D-4244 | [1] | CLIP (LOOP) | |
| 15. | 6V-3341 | [1] | GROMMET | |
| 16. | 7C-4354 | [1] | CLIP | |
| 17. | 8T-1899 | [1] | CLIP (SLOT) | |
| 18. | 8T-1900 | [1] | CLIP (TAB) | |
| 19. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4123 | [2] | WASHER (22X35X3.5-MM THK) | |
| 21. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4780 M | [2] | BOLT (M20X2.5X30-MM) | |
| 24. | 9X-7378 | [2] | SEAL-O-RING | |
| 25. | 9X-7380 | [1] | SEAL-O-RING | |
| 26. | 9X-7383 | [1] | SEAL-O-RING | |
| 27. | 7Y-5074 E | GUARD-HOSE (70-CM) | ||
| 28. | 312-1143 | [1] | SLEEVE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63911058
392-7058: LINES GP-AIR CONDITIONER
392-7058 LINES GP-AIR CONDITIONER
S/N N9M551-UP
PART OF 392-7060 HYDRAULIC AR
S/N N9M551-UP
PART OF 392-7060 HYDRAULIC AR
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 348-5390 | [1] | HOSE AS | |
| 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | ||
| 2. | 350-3564 | [1] | BRACKET AS | |
| 9R-9866 M | [1] | BOSS-THREADED (M10X1.5-THD) | ||
| 3. | 495-0212 C | [1] | HOSE AS | |
| 4. | 067-2551 | [2] | CLIP | |
| 5. | 143-4535 C | [1] | CLIP (SLOT) | |
| 6. | 143-4536 C | [1] | CLIP (TAB) | |
| 7. | 178-3336 M | [4] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 8. | 203-2287 | [1] | CLIP | |
| 9. | 312-1143 | [1] | SLEEVE | |
| 10. | 326-4516 C | [10] | TIE-CABLE | |
| 11. | 344-5675 CM | [3] | NUT (M10X1.5-THD) | |
| 12. | 366-2401 C | [1] | GROMMET | |
| 13. | 4S-4456 | [2] | CLIP | |
| 14. | 515-5461 C | [1] | HOSE AS | |
| 9X-7378 | [1] | SEAL-O-RING | ||
| 3E-4057 | [1] | VALVE AS (REFRIGERANT, LOW SIDE) | ||
| 180-7180 | [1] | CORE-VALVE | ||
| 3E-4051 | [1] | CAP-SEAL (LOW SIDE CHARGE PORT) | ||
| 172-4880 | [1] | CAP-SEAL | ||
| 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | ||
| 15. | 526-5197 C | [1] | SLEEVE | |
| 16. | 547-7135 C | [1] | SLEEVE | |
| 17. | 6D-4244 | [1] | CLIP (LOOP) | |
| 18. | 6V-1889 C | [2] | CLIP (LOOP) | |
| 19. | 8T-4121 C | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4123 | [2] | WASHER (22X35X3.5-MM THK) | |
| 21. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4780 M | [2] | BOLT (M20X2.5X30-MM) | |
| 23. | 9X-7380 | [1] | SEAL-O-RING | |
| 24. | 9X-7383 | [1] | SEAL-O-RING | |
| 25. | 7Y-5074 E | GUARD-HOSE (70-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63911059
250-2933: LINES GP-HEATER
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-2488 | [4] | CLAMP-HOSE | |
| 2. | 260-5806 | [1] | PLATE AS | |
| 3. | 278-3354 | [1] | FILM-INSTRUCTION (HVAC WATER, DRAINING, FILLING) | |
| 4. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 5. | 6D-1641 | [1] | CLIP (LOOP) | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 8. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 9. | 136-1953 E | HOSE (85-CM) | ||
| 9A. | 136-1953 E | HOSE (87-CM) | ||
| 10. | 5P-5637 D | SEAL (0.6-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
