OPERATOR STATION
MONITOR GPDOOR GP
DUCT GP
FAN GP
SEAT GP
OPERATOR STATION
MONITOR GP
#SEBP63921080
451-6020: DISPLAY GP-CAMERA
For full view, you need register
Parts for your 140M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(CAMERA) | |
| 2. | 3S-2093 | [10] | STRAP-CABLE | |
| 3. | 251-8248 | [1] | CABLE AS-COMMUNICATION | |
| 4. | 268-8643 | [1] | CABLE AS (6-M) | |
| 5. | 333-8153 | [2] | CONNECTION AS | |
| 6. | 438-3109 | [1] | HARNESS AS-PANEL | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 100-5041 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [14] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [13] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [13] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 7. | 464-6049 | [1] | MODULE GP-DISPLAY | |
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 440-4780 | [1] | CABLE AS | ||
| 8. | 441-8382 | [1] | PLATE AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 9. | 8T-2226 M | [4] | SCREW-MACHINE (M5X0.8X10-MM) | |
| 10. | 9X-2043 M | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 11. | 9X-8267 | [4] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63921081
393-7786: DISPLAY GP-MONITOR
393-7786 DISPLAY GP-MONITOR
S/N N9G1-UP
HIGHLY REGULATED COUNTRIES
PART OF 398-1917, 541-4987, 541-4988, 541-4989, 541-4990, 541-4991, 541-4992, 541-4993, 541-4994, 541-4995, 541-4996, 541-4997, 541-4998, 541-4999, 541-5000, 541-5001, 541-5002, 541-5003, 541-5004, 541-5005, 541-5006, 541-5007, 541-5009, 542-8771, 542-8772 CAB AR
S/N N9G1-UP
HIGHLY REGULATED COUNTRIES
PART OF 398-1917, 541-4987, 541-4988, 541-4989, 541-4990, 541-4991, 541-4992, 541-4993, 541-4994, 541-4995, 541-4996, 541-4997, 541-4998, 541-4999, 541-5000, 541-5001, 541-5002, 541-5003, 541-5004, 541-5005, 541-5006, 541-5007, 541-5009, 542-8771, 542-8772 CAB AR
For full view, you need register
Parts for your 140M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 369-4095 | [1] | SWITCH AS-START | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 327-6999 | [1] | SWITCH AS-ROCKER (DPF REGENERATION) | |
| 3. | 345-0351 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | |
| 4. | 369-6072 | [1] | CONTROL GP-UNPRGMED MONITOR | |
| 5. | 8T-0325 M | [8] | BOLT (M5X0.8X14-MM) | |
| 6. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP63921082
357-9199: DOOR GP-CAB
For full view, you need register
Parts for your 140M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-8591 M | [3] | NUT-CLIP (M6X1-THD) | |
| 2. | 6V-7636 | [2] | PIN AS-SPRING | |
| 3. | 184-0983 M | [1] | NUT-HEX FLANGE (M12X1.75-THD) | |
| 4. | 252-1862 J | [1] | HANDLE AS-PULL | |
| 5. | 252-1863 | [1] | GASKET | |
| 6. | 261-1731 | [1] | BOOT | |
| 7. | 269-2890 | [1] | CLEVIS | |
| 8. | 269-2892 | [1] | PIN | |
| 9. | 269-2893 | [1] | CLIP | |
| 10. | 272-1623 | [1] | BELLCRANK AS | |
| 11. | 285-3692 | [1] | SPACER-SPECIAL | |
| 12. | 295-6405 | [1] | LATCH AS (RH) | |
| 13. | 507-2767 | [1] | STRIKER AS | |
| 14. | 299-1020 | [1] | LEVER AS | |
| 8T-7971 | [2] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | ||
| 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | ||
| 115-9345 | [1] | KNOB-CONTROL | ||
| 299-1024 | [1] | LEVER | ||
| 299-1441 | [1] | SPRING | ||
| 299-1442 | [1] | SPRING | ||
| 15. | 299-1660 | [1] | CABLE AS | |
| 7S-9930 | [2] | RING-RETAINING | ||
| 159-0052 | [2] | PIN-CLEVIS | ||
| 16. | 328-4985 | [1] | LATCH AS-DOOR (RH) | |
| 17. | 357-0728 | [1] | HARNESS AS-WINDOW WIPER (LH) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM) | |||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 144-0195 E | HOSE (119-CM) | |||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 297-4169 | [2] | GROMMET | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 18. | 357-9181 | [1] | DOOR AS (RH) | |
| 7Y-9096 M | [2] | SCREW-TRUSS HEAD (M6X1X6-MM) | ||
| 9X-2042 M | [3] | SCREW-TRUSS HEAD (M6X1X12-MM) | ||
| 308-2903 M | [3] | NUT-WELD (M6X1-THD) | ||
| 19. | 357-9187 | [1] | HANDLE AS-PULL | |
| 20. | 357-9188 | [1] | PLATE | |
| 21. | 357-9190 | [1] | BRACKET AS | |
| 22. | 357-9191 | [1] | BUMPER | |
| 23. | 357-9236 | [1] | GLASS (DOOR) | |
| 24. | 357-9260 | [1] | COVER (WIPER-RH) | |
| 25. | 357-9261 | [1] | COVER-LATCH | |
| 26. | 357-9652 Y | [1] | WIPER GP-WINDOW (DOOR, RH) | |
| 27. | 357-9755 | [1] | LINKAGE | |
| 28. | 361-0421 | [1] | COVER | |
| 29. | 372-7541 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 30. | 376-4793 | [1] | HANDLE AS-PULL | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 31. | 380-6158 | [2] | HINGE AS | |
| (EACH INCLUDES) | ||||
| 31A. | 372-5042 | [2] | BUSHING | |
| 32. | 4E-1384 | [1] | BUMPER-CONICAL | |
| 33. | 114-6658 | [4] | WASHER (6.5X17X1-MM THK) | |
| 34. | 3E-8020 M | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 35. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 36. | 6D-4244 | [2] | CLIP (LOOP) | |
| 37. | 8T-4000 M | [2] | SCREW-WASHER HEAD (M8X1.25X4.8-MM) | |
| 38. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 39. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 40. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 41. | 9X-2043 M | [13] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 42. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 43. | 9X-2125 M | [10] | BOLT-LOCKING (M10X1.5X25-MM) | |
| 44. | 331-9731 E | SEAL (4-CM) | ||
| 45. | 353-7114 E | SEAL (440-CM) | ||
| 46. | 367-2761 E | SEAL (500-CM) | ||
| 47. | 108-5471 | [1] | CLEVIS | |
| 48. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 49. | 6V-8185 | [1] | NUT (1/4-20-THD) | |
| 50. | 3S-2093 | [1] | STRAP-CABLE | |
| 51. | 7X-0605 | [1] | WASHER-HARD (13X28X1.6-MM THK) | |
| 52. | 242-5206 | [4] | SPACER (6.4X12.5X0.76-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63921083
357-9200: DOOR GP-CAB
For full view, you need register
Parts for your 140M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-8591 M | [3] | NUT-CLIP (M6X1-THD) | |
| 2. | 6V-7636 | [2] | PIN AS-SPRING | |
| 3. | 184-0983 M | [1] | NUT-HEX FLANGE (M12X1.75-THD) | |
| 4. | 252-1862 J | [1] | HANDLE AS-PULL | |
| 5. | 252-1863 | [1] | GASKET | |
| 6. | 261-1731 | [1] | BOOT | |
| 7. | 269-2890 | [1] | CLEVIS | |
| 8. | 269-2892 | [1] | PIN | |
| 9. | 269-2893 | [1] | CLIP | |
| 10. | 272-1623 | [1] | BELLCRANK AS | |
| 11. | 285-3692 | [1] | SPACER-SPECIAL | |
| 12. | 295-6406 | [1] | LATCH AS (LH) | |
| 13. | 507-2767 | [1] | STRIKER AS | |
| 14. | 299-1021 Y | [1] | LEVER GP-CAB DOOR | |
| 15. | 299-1660 | [1] | CABLE AS | |
| 7S-9930 | [2] | RING-RETAINING | ||
| 159-0052 | [2] | PIN-CLEVIS | ||
| 16. | 328-4984 | [1] | LATCH AS-DOOR (LH) | |
| 17. | 357-0728 | [1] | HARNESS AS-WINDOW WIPER (LH) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(9-CM) | |||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 144-0195 E | HOSE (134-CM) | |||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 297-4169 | [2] | GROMMET | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 18. | 357-9182 | [1] | DOOR AS (LH) | |
| 308-2903 M | [3] | NUT-WELD (M6X1-THD) | ||
| 7Y-9096 M | [2] | SCREW-TRUSS HEAD (M6X1X6-MM) | ||
| 9X-2042 M | [3] | SCREW-TRUSS HEAD (M6X1X12-MM) | ||
| 19. | 357-9187 | [1] | HANDLE AS-PULL | |
| 20. | 357-9188 | [1] | PLATE | |
| 21. | 357-9190 | [1] | BRACKET AS | |
| 22. | 357-9191 | [1] | BUMPER | |
| 23. | 357-9236 | [1] | GLASS (DOOR) | |
| 24. | 357-9257 | [1] | COVER (WIPER-LH) | |
| 25. | 357-9258 | [1] | COVER-LATCH | |
| 26. | 357-9653 Y | [1] | WIPER GP-WINDOW (DOOR, LH) | |
| 27. | 357-9755 | [1] | LINKAGE | |
| 28. | 361-0421 | [1] | COVER | |
| 29. | 372-7541 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 30. | 376-4794 | [1] | HANDLE AS-PULL | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 31. | 380-6158 | [2] | HINGE AS | |
| (EACH INCLUDES) | ||||
| 31A. | 372-5042 | [2] | BUSHING | |
| 32. | 4E-1384 | [1] | BUMPER-CONICAL | |
| 33. | 114-6658 | [4] | WASHER (6.5X17X1-MM THK) | |
| 34. | 3E-8020 M | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 35. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 36. | 6D-4244 | [2] | CLIP (LOOP) | |
| 37. | 8T-4000 M | [2] | SCREW-WASHER HEAD (M8X1.25X4.8-MM) | |
| 38. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 39. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 40. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 41. | 9X-2043 M | [13] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 42. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 43. | 9X-2125 M | [10] | BOLT-LOCKING (M10X1.5X25-MM) | |
| 44. | 331-9731 E | SEAL (4-CM) | ||
| 45. | 353-7114 E | SEAL (440-CM) | ||
| 46. | 367-2761 E | SEAL (500-CM) | ||
| 47. | 108-5471 | [1] | CLEVIS | |
| 48. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 49. | 6V-8185 | [1] | NUT (1/4-20-THD) | |
| 50. | 3S-2093 | [1] | STRAP-CABLE | |
| 51. | 7X-0605 | [1] | WASHER-HARD (13X28X1.6-MM THK) | |
| 52. | 242-5206 | [4] | SPACER (6.4X12.5X0.76-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63921084
423-4307: DOOR GP-CAB
For full view, you need register
Parts for your 140M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 4E-1384 | [1] | BUMPER-CONICAL | |
| 3. | 172-8591 M | [3] | NUT-CLIP (M6X1-THD) | |
| 4. | 6V-7636 | [2] | PIN AS-SPRING | |
| 5. | 108-5471 | [1] | CLEVIS | |
| 6. | 252-1862 J | [1] | HANDLE AS-PULL | |
| 7. | 252-1863 | [1] | GASKET | |
| 8. | 261-1731 | [1] | BOOT | |
| 9. | 269-2890 | [1] | CLEVIS | |
| 10. | 269-2892 | [1] | PIN | |
| 11. | 269-2893 | [1] | CLIP | |
| 12. | 272-1623 | [1] | BELLCRANK AS | |
| 13. | 285-3692 | [1] | SPACER-SPECIAL | |
| 14. | 295-6405 | [1] | LATCH AS (RH) | |
| 15. | 507-2767 | [1] | STRIKER AS | |
| 16. | 299-1020 | [1] | LEVER AS | |
| 8T-7971 | [2] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | ||
| 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | ||
| 115-9345 | [1] | KNOB-CONTROL (DOOR RELEASE) | ||
| 17. | 299-1660 | [1] | CABLE AS | |
| 7S-9930 | [2] | RING-RETAINING | ||
| 159-0052 | [2] | PIN-CLEVIS | ||
| 18. | 328-4985 | [1] | LATCH AS-DOOR (RH) | |
| 19. | 357-9181 | [1] | DOOR AS (RH) | |
| 7Y-9096 M | [2] | SCREW-TRUSS HEAD (M6X1X6-MM) | ||
| 9X-2042 M | [3] | SCREW-TRUSS HEAD (M6X1X12-MM) | ||
| 308-2903 M | [3] | NUT-WELD (M6X1-THD) | ||
| 20. | 357-9187 | [1] | HANDLE AS-PULL | |
| 21. | 357-9188 | [1] | PLATE | |
| 22. | 357-9190 | [1] | BRACKET AS | |
| 23. | 357-9191 | [2] | BUMPER | |
| 24. | 357-9260 | [1] | COVER (WIPER-RH) | |
| 25. | 357-9261 | [1] | COVER-LATCH | |
| 26. | 357-9652 Y | [1] | WIPER GP-WINDOW (DOOR, RH) | |
| 27. | 357-9755 | [1] | LINKAGE | |
| 28. | 361-0421 | [1] | COVER | |
| 29. | 365-5588 | [1] | HARNESS AS-CHASSIS | |
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM) | |||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 126-1768 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 144-0195 E | HOSE (119-CM) | |||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 297-4169 | [2] | GROMMET | ||
| 30. | 372-7541 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 31. | 376-4793 | [1] | HANDLE AS-PULL | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 32. | 380-3889 | [1] | GLASS AS-DOOR (RH)(HEATED) | |
| 126-1768 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL) | ||||
| 33. | 380-6158 | [2] | HINGE AS | |
| (EACH INCLUDES) | ||||
| 33A. | 372-5042 | [2] | BUSHING | |
| 34. | 381-2326 | [2] | RELAY AS (24-VOLT)(MAIN RELAY) | |
| 35. | 391-2051 | [2] | STRAP-CABLE | |
| 36. | 114-6658 | [4] | WASHER (6.5X17X1-MM THK) | |
| 37. | 184-0983 M | [1] | NUT-HEX FLANGE (M12X1.75-THD) | |
| 38. | 248-2841 | [1] | RELAY AS (24-VOLT)(HEATED MIRRORS) | |
| 39. | 3E-8020 M | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 40. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 41. | 6D-4244 | [2] | CLIP (LOOP) | |
| 42. | 6V-8185 | [1] | NUT (1/4-20-THD) | |
| 43. | 8T-4000 M | [2] | SCREW-WASHER HEAD (M8X1.25X4.8-MM) | |
| 44. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 45. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 46. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 47. | 9S-2437 | [2] | SCREW-TAPPING (10-24X19.05-MM) | |
| 48. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 49. | 9X-2043 M | [13] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 50. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 51. | 9X-2125 M | [10] | BOLT-LOCKING (M10X1.5X25-MM) | |
| 52. | 331-9731 E | SEAL (4-CM) | ||
| 53. | 353-7114 E | SEAL (440-CM) | ||
| 54. | 367-2761 E | SEAL (500-CM) | ||
| 55. | 242-5206 | [4] | SPACER (6.4X12.5X0.76-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63921085
244-2701: DUCT & FILTER GP-CAB AIR
244-2701 DUCT & FILTER GP-CAB AIR
S/N N9G1-UP
PART OF 361-3133 AIR CONDITIONER GP
S/N N9G1-UP
PART OF 361-3133 AIR CONDITIONER GP
For full view, you need register
Parts for your 140M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2R-2376 | [2] | WASHER (7X16X0.8-MM THK) | |
| 2. | 149-1912 | [1] | FILTER ELEMENT-CAB AIR (CAB HEATER, AIR CONDITIONER) | |
| -OR- | ||||
| 220-8800 | [1] | FILTER ELEMENT-CAB AIR (ACTIVATED CHARCOAL) | ||
| 3. | 211-2660 | [1] | FILTER ELEMENT-AIR (CAB HEATER, AIR CONDITIONER) | |
| 4. | 297-4139 | [1] | DUCT | |
| 5. | 297-4140 | [1] | DUCT | |
| 6. | 525-4816 | [1] | DUCT AS | |
| 7K-4201 | [2] | NUT-SPEED | ||
| 7. | 274-2385 | [1] | COVER | |
| 8. | 274-2392 | [2] | SCREW-THUMB | |
| 9. | 5P-4115 | [1] | WASHER-HARD (7.2X19X2-MM THK) | |
| 10. | 6V-6317 M | [2] | BOLT (M10X1.5X20-MM) | |
| 11. | 8T-0640 M | [1] | BOLT (M6X1X30-MM) | |
| 12. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 126-5648 E | SEAL (70-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63921086
170-5334: FAN GP-CIRCULATING
170-5334 FAN GP-CIRCULATING -FRONT DEFROSTER
S/N N9G1-UP
24-VOLT
PART OF 233-3137 FAN GP-CIRCULATING
Type 1
S/N N9G1-UP
24-VOLT
PART OF 233-3137 FAN GP-CIRCULATING
Type 1
For full view, you need register
Parts for your 140M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-2713 | [1] | BOLT (1/4-20X1.75-IN) | |
| 2. | 3D-8747 | [1] | BRACKET | |
| 3. | 383-7644 | [1] | FAN AS (4-BLADE) | |
| 4. | 3D-8749 | [1] | GUARD | |
| 5. | 3T-6774 | [1] | GROMMET | |
| 6. | 9X-9689 | [1] | BASE-FAN | |
| 7. | 135-1979 | [1] | BRACKET | |
| 8. | 386-9663 CY | [1] | MOTOR GP-ELECTRIC (24-VDC, CIRCULATING FAN) | |
| 9. | 031-4155 | [1] | LOCKNUT (5/16-18-THD) | |
| 10. | 1M-1230 | [2] | NUT-LOCKING (10-32-THD) | |
| 11. | 2D-6235 | [1] | LOCKNUT (1/4-20-THD) | |
| 12. | 3D-8752 | [1] | LOCKNUT (5/16-24-THD) | |
| 13. | 4M-0061 | [1] | BOLT (5/16-18X0.75-IN) | |
| 14. | 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 15. | 6G-5987 | [1] | BRACKET | |
| 16. | 7L-8316 | [1] | SETSCREW-SOCKET (10-32X2.54-IN) | |
| 17. | 7T-0582 | [1] | BOLT | |
| 18. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 9T-5241 | [2] | WASHER (9.53X18X1-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63921087
170-5334: FAN GP-CIRCULATING
170-5334 FAN GP-CIRCULATING -FRONT DEFROSTER
S/N N9G1-UP
24-VOLT
PART OF 233-3137 FAN GP-CIRCULATING
Type 2
S/N N9G1-UP
24-VOLT
PART OF 233-3137 FAN GP-CIRCULATING
Type 2
For full view, you need register
Parts for your 140M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-2713 | [1] | BOLT (1/4-20X1.75-IN) | |
| 2. | 3D-8747 | [1] | BRACKET | |
| 3. | 383-7644 | [1] | FAN AS (4-BLADE) | |
| 4. | 3D-8749 | [1] | GUARD | |
| 5. | 3T-6774 | [1] | GROMMET | |
| 6. | 9X-9689 | [1] | BASE-FAN | |
| 7. | 135-1979 | [1] | BRACKET | |
| 8. | 436-9180 CY | [1] | MOTOR GP-ELECTRIC (CIRCULATING FAN) | |
| 9. | 031-4155 | [1] | LOCKNUT (5/16-18-THD) | |
| 10. | 1M-1230 | [2] | NUT-LOCKING (10-32-THD) | |
| 11. | 2D-6235 | [1] | LOCKNUT (1/4-20-THD) | |
| 12. | 3D-8752 | [1] | LOCKNUT (5/16-24-THD) | |
| 13. | 4M-0061 | [1] | BOLT (5/16-18X0.75-IN) | |
| 14. | 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 15. | 6G-5987 | [1] | BRACKET | |
| 16. | 7L-8316 | [1] | SETSCREW-SOCKET (10-32X2.54-IN) | |
| 17. | 7T-0582 | [1] | BOLT | |
| 18. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 9T-5241 | [2] | WASHER (9.53X18X1-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63921088
233-3137: FAN GP-CIRCULATING
233-3137 FAN GP-CIRCULATING -DEFROSTER
S/N N9G1-UP
WITH SWITCH
PART OF 397-7457, 397-7458, 541-4987, 541-4988, 541-4989, 541-4990, 541-4991, 541-4992, 541-4993, 541-4994, 541-4995, 541-4996, 541-4997, 541-4998, 541-4999, 541-5000, 541-5001, 541-5002, 541-5003, 541-5004, 541-5005, 541-5006, 541-5007, 541-5009, 542-8771, 542-8772 CAB AR
S/N N9G1-UP
WITH SWITCH
PART OF 397-7457, 397-7458, 541-4987, 541-4988, 541-4989, 541-4990, 541-4991, 541-4992, 541-4993, 541-4994, 541-4995, 541-4996, 541-4997, 541-4998, 541-4999, 541-5000, 541-5001, 541-5002, 541-5003, 541-5004, 541-5005, 541-5006, 541-5007, 541-5009, 542-8771, 542-8772 CAB AR
For full view, you need register
Parts for your 140M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4003 | [1] | RESISTOR | |
| 2. | 170-5334 Y | [1] | FAN GP-CIRCULATING (FRONT DEFROSTER) | |
| 3. | 367-5211 | [1] | SWITCH AS-ROCKER (24-VOLT)(FAN BLOWER SPEED) | |
| 4. | 154-8079 C | [2] | NUT-RETAINER | |
| 5. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 6. | 213-7315 CM | [2] | SCREW-TRUSS HEAD (M4X0.7X25-MM) | |
| 7. | 5P-8441 | [1] | GROMMET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63921089
174-2231: HOUSING GP-SEAT SUSPENSION
174-2231 HOUSING GP-SEAT SUSPENSION
S/N N9G1-UP
PART OF 160-7165 SUSPENSION GP-SEAT
S/N N9G1-UP
PART OF 160-7165 SUSPENSION GP-SEAT
For full view, you need register
Parts for your 140M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Y-7927 | [1] | PIN | |
| 2. | 2D-6235 | [2] | LOCKNUT (1/4-20-THD) | |
| 3. | 2M-7819 | [4] | RING-RETAINING | |
| 4. | 3D-2975 | [2] | RING-RETAINING | |
| 5. | 4B-5059 | [6] | WASHER (15X29.5X2.5-MM THK) | |
| 6. | 4N-2927 | [2] | RACE-THRUST BEARING | |
| 7. | 5D-4822 | [2] | RING-RETAINING | |
| 8. | 5P-8445 | [4] | RING-RETAINING | |
| 9. | 5V-0770 | [2] | BOLT-CARRIAGE (1/4-20X0.74-IN) | |
| 10. | 7M-7219 | [1] | BEARING-THRUST | |
| 11. | 7V-5191 | [2] | SPACER (28X10X7.1-MM THK) | |
| 12. | 8L-8413 | [2] | STRAP-CABLE (WHITE) | |
| 13. | 8S-7803 | [4] | RING-RETAINING | |
| 14. | 8Y-6041 | [1] | ARM AS | |
| 15. | 8Y-6045 | [1] | CAM | |
| 16. | 8Y-6046 | [1] | PIN | |
| 17. | 8Y-6047 | [2] | PIN | |
| 18. | 8Y-6060 | [2] | ROLLER | |
| 19. | 8Y-6062 | [1] | LINK-ACTUATOR (RH) | |
| 20. | 8Y-6063 | [1] | LINK-ACTUATOR (LH) | |
| 21. | 8Y-6064 | [2] | ROLLER-SLIDER | |
| 22. | 8Y-6066 | [1] | SPRING | |
| 23. | 8Y-6067 | [1] | SPACER (10.54-MM THK) | |
| 24. | 8Y-6068 | [1] | NUT (3/8X16-THD) | |
| 25. | 8Y-6069 | [1] | ADJUSTER AS | |
| 26. | 9X-8918 | [3] | SCREW-FLAT HEAD (8-32X0.5-IN) | |
| 27. | 095-0878 | [1] | PIN-SPRING | |
| 28. | 131-4242 | [1] | BOLT (3/8-16X5.18-IN) | |
| 29. | 131-5167 | [1] | KNOB AS-ADJUSTMENT (WEIGHT) | |
| 30. | 161-5967 | [1] | SHAFT | |
| 31. | 174-2237 | [1] | FRAME AS-SUSPENSION | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-5945 | [1] | KIT-SUSPENSION KNOB (HEIGHT ADJUSTMENT) | ||
| (INCLUDES KNOBS) | ||||
| 8Y-6859 | [1] | KIT-SPRING (SUSPENSION SEAT) | ||
| (INCLUDES SPRINGS, BUSHINGS & RINGS) | ||||
| 8Y-6860 | [1] | KIT-SPRING (HEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES SPRINGS, BUSHINGS, RODS & SPACERS) | ||||
| 100-3224 | [1] | KIT-INDICATOR (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES TAPE, GUIDE & STRAPS) | ||||
| 100-5179 | [1] | KIT-BUMPER (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES BUMPERS) | ||||
| 108-4086 | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| (INCLUDES FOLLOWER & PIN) | ||||
| 108-4087 | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| (INCLUDES FOLLOWER & PIN) | ||||
| 108-4103 | [1] | KIT-BEARING (SUSPENSION SEAT) | ||
| (INCLUDES ROLLER ASSEMBLIES) | ||||
