OPERATOR STATION
SEAT GPWASHER GP-WINDOW
CAB GP
WINDOW GP
OPERATOR STATION
SEAT GP
#SEBP63941160
191-2933: SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT -AIR
S/N N9T1-UP
24-VOLT
PART OF 385-7832, 443-8262, 443-8263 SEAT GP-SUSPENSION
Type 3
S/N N9T1-UP
24-VOLT
PART OF 385-7832, 443-8262, 443-8263 SEAT GP-SUSPENSION
Type 3
For full view, you need register
Parts for your 160M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 101-0003 | [26] | FASTENER | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 433-5754 Y | [1] | HARNESS AS-WIRING (SEAT AIR COMPRESSOR) | |
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 | [1] | SHAFT (OUTER) | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 CE | CONDUIT-FLEXIBLE (29-CM) | ||
| 30A. | 211-5358 CE | CONDUIT-FLEXIBLE (43-CM) | ||
| 32. | 442-8151 | [1] | CLIP-CABLE | |
| 33. | 3S-2093 C | [5] | STRAP-CABLE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SUSPENSION SEAT) | ||
| (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING) | ||||
| 192-7848 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS) | ||||
| 211-9294 | [1] | KIT-TETHER (SUSPENSION SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 213-5170 AB | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7779 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| 452-6716 C | [1] | KIT-SEAT AIR COMPRESSOR (SUSPENSION SEAT) | ||
| (INCLUDES SCREWS, COMPRESSOR AS, BRACKET, STRAPS & HOSE) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63941161
256-8768: SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT -AIR
S/N N9T1-UP
24-VOLT
PART OF 421-1286, 421-1287 SEAT GP-SUSPENSION
S/N N9T1-UP
24-VOLT
PART OF 421-1286, 421-1287 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 160M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 5. | 101-0003 | [26] | FASTENER | |
| 6. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 7. | 164-1234 | [1] | PLATE | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 C | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 433-5754 | [1] | HARNESS AS-WIRING (SEAT AIR COMPRESSOR) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 097-7234 | [2] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 C | [1] | SHAFT (OUTER) | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 5P-6010 D | TUBE (0.257-M) | ||
| 29A. | 5P-6010 D | TUBE (0.356-M) | ||
| 30. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 31. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 31A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 34. | 442-8151 | [1] | CLIP-CABLE | |
| 35. | 3S-2093 | [4] | STRAP-CABLE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SEAT) | ||
| (INCLUDES KNOB ASSEMBLY) | ||||
| 212-7779 H | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER, | ||||
| BRACKETS, KIT, CABLE ASSEMBLY & KNOB) | ||||
| 211-9294 | [1] | KIT-TETHER (SEAT) | ||
| (INCLUDES TETHER) | ||||
| 213-5170 | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7783 H | [1] | KIT-PULLEY | ||
| (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING) | ||||
| 397-6405 | [1] | KIT-SEAT AIR COMPRESSOR | ||
| (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET-MOUNT & HARNESS ASSEMBLIES) | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | KITS MARKED H SERVICE PART(S) MARKED H | |||
| M | METRIC PART | |||
#SEBP63941162
325-9410: TANK GP-WINDOW WASHER
325-9410 TANK GP-WINDOW WASHER
S/N N9T1-UP
PART OF 310-2029 WIPER & WASHER GP-WINDOW
S/N N9T1-UP
PART OF 310-2029 WIPER & WASHER GP-WINDOW
For full view, you need register
#SEBP63941163
361-3108: TRIM GP-CAB
For full view, you need register
Parts for your 160M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-0622 B | [10] | PLUG-BUTTON | |
| 2. | 2V-2015 | [1] | NUT-SPEED | |
| 3. | 172-8591 M | [7] | NUT-CLIP (M6X1-THD) | |
| 4. | 6V-8928 | [1] | HOOK-COAT | |
| 5. | 8Y-6379 | [1] | KIT-HAMMER (CAB WINDOW) | |
| (INCLUDES BRACKET & HAMMER) | ||||
| 6. | 8Y-6388 | [4] | LOUVER AS-VENT | |
| 7. | 9U-8263 B | [1] | COVER | |
| 8. | 144-4107 B | [2] | FASTENER | |
| 9. | 164-8474 | [2] | LOUVER AS-VENT | |
| 10. | 171-4047 | [4] | LOUVER AS-VENT | |
| 11. | 274-2392 | [1] | SCREW-THUMB | |
| 12. | 294-1002 | [1] | PLENUM (LOWER, RH) | |
| 13. | 294-1004 | [1] | PLENUM (LOWER, LH) | |
| 14. | 297-4170 | [1] | INSULATION | |
| 15. | 303-9456 | [1] | CUP HOLDER | |
| 16. | 325-1258 | [1] | PLENUM (UPPER, RH) | |
| 17. | 325-1260 | [1] | PLENUM (UPPER, LH) | |
| 18. | 357-2261 | [1] | SUPPORT AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 19. | 325-9407 | [1] | FILM-IDENTIFICATION (WRITE DATA) | |
| 20. | 357-2270 | [1] | COVER AS | |
| 21. | 330-3865 | [1] | PLATE AS | |
| 9X-2032 M | [1] | NUT-WELD (M4X0.7-THD) | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 419-3214 | [6] | BOSS | ||
| 23. | 343-6499 | [1] | COVER AS (RH) | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [6] | NUT-WELD (M8X1.25-THD) | ||
| 9X-2032 M | [1] | NUT-WELD (M4X0.7-THD) | ||
| 24. | 343-6500 | [1] | COVER AS (LH) | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 25. | 361-0429 | [1] | PANEL (LH) | |
| 26. | 361-3116 | [1] | TRAY | |
| 27. | 361-3117 | [1] | PAD | |
| 28. | 368-8072 | [1] | PANEL | |
| 29. | 373-4446 B | [1] | PLUG | |
| 30. | 398-8490 | [1] | COVER AS-PANEL | |
| 297-4162 | [1] | FILM-IDENTIFICATION (SWITCH PANEL, UPPER) | ||
| 398-9593 | [1] | FILM-IDENTIFICATION (SWITCH PANEL, LOWER) | ||
| 32. | 419-7776 | [1] | COVER AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 33. | 7X-0579 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 34. | 436-7082 | [1] | TRAY | |
| 35. | 437-8991 | [1] | NET AS (STORAGE) | |
| 39. | 263-2576 | [1] | PLATE AS | |
| 40. | 361-0425 | [1] | FLOOR MAT AS | |
| 43. | 104-2091 | [16] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 44. | 111-4627 M | [6] | SCREW-MACHINE (M6X1X30-MM) | |
| 45. | 114-6658 | [21] | WASHER (6.5X17X1-MM THK) | |
| 46. | 195-0936 M | [6] | INSERT-THREADED (M6X1-THD) | |
| 48. | 2R-2376 | [1] | WASHER (7X16X0.8-MM THK) | |
| 49. | 2V-3726 B | [1] | BUMPER | |
| 50. | 3E-8020 M | [8] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 51. | 6K-3273 | [1] | RIVET-POP | |
| 52. | 6V-5839 | [4] | WASHER (11X21X2.5-MM THK) | |
| 53. | 6V-8212 M | [4] | BOLT (M10X1.5X16-MM) | |
| 54. | 8C-9660 | [6] | WASHER (4.6X7.9X0.8-MM THK) | |
| 55. | 8R-3695 B | [1] | GROMMET | |
| 56. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 57. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 58. | 9N-1995 | [3] | RIVET-POP | |
| 59. | 9X-2038 | [9] | WASHER (7X19X2-MM THK) | |
| 60. | 9X-2043 M | [7] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 61. | 9X-2044 M | [14] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 62. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 63. | 5P-5927 D | SEAL (0.9-M) | ||
| 64. | 8T-6936 D | SEAL (0.5-M EACH) | ||
| 65. | 361-3114 | [1] | PLATE AS | |
| 9X-2032 M | [2] | NUT-WELD (M4X0.7-THD) | ||
| 66. | 193-5916 | [4] | PLUG | |
| 67. | 162-2165 M | [1] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 68. | 096-6166 | [1] | WASHER-HARD (4.5X9X1-MM THK) | |
| 69. | 8E-7791 | [1] | STRAP | |
| 70. | 8D-6542 | [1] | GROMMET | |
| 71. | 7G-4824 | [1] | STRAP | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP63941164
361-3108: TRIM GP-CAB
361-3108 TRIM GP-CAB -HVAC
S/N N9T1-UP
PART OF 361-3140, 387-9586, 387-9587, 555-0543, 555-0544, 555-0545 CAB AR
Type 2
S/N N9T1-UP
PART OF 361-3140, 387-9586, 387-9587, 555-0543, 555-0544, 555-0545 CAB AR
Type 2
For full view, you need register
Parts for your 160M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-0622 B | [10] | PLUG-BUTTON | |
| 2. | 2V-2015 | [1] | NUT-SPEED | |
| 3. | 6V-8928 | [1] | HOOK-COAT | |
| 4. | 8Y-6379 | [1] | KIT-HAMMER (CAB WINDOW) | |
| (INCLUDES BRACKET & HAMMER) | ||||
| 5. | 422-2152 | [4] | LOUVER AS-VENT | |
| 6. | 9U-8263 B | [1] | COVER | |
| 7. | 144-4107 B | [2] | FASTENER | |
| 8. | 164-8474 | [2] | LOUVER AS-VENT | |
| 9. | 171-4047 | [4] | LOUVER AS-VENT | |
| 10. | 214-9186 C | [5] | BUTTON | |
| 11. | 274-2392 | [1] | SCREW-THUMB | |
| 12. | 294-1002 | [1] | PLENUM (LOWER, RH) | |
| 13. | 294-1004 | [1] | PLENUM (LOWER, LH) | |
| 14. | H | INSULATION-BULK (5-DM) | ||
| 15. | 303-9456 | [1] | CUP HOLDER | |
| 16. | 325-1258 | [1] | PLENUM (UPPER, RH) | |
| 17. | 325-1260 | [1] | PLENUM (UPPER, LH) | |
| 18. | 325-9407 | [1] | FILM-IDENTIFICATION (WRITE DATA) | |
| 19. | 330-3865 | [1] | PLATE AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 9X-2032 M | [1] | NUT-WELD (M4X0.7-THD) | ||
| 20. | 334-6090 C | [6] | STUD | |
| 21. | 343-6499 | [1] | COVER AS (RH) | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [6] | NUT-WELD (M8X1.25-THD) | ||
| 9X-2032 M | [1] | NUT-WELD (M4X0.7-THD) | ||
| 22. | 343-6500 | [1] | COVER AS (LH) | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 23. | 357-2261 | [1] | SUPPORT AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 24. | 357-2270 | [1] | COVER AS | |
| 25. | 361-0429 | [1] | PANEL (LH) | |
| 26. | 361-3116 | [1] | TRAY | |
| 27. | 361-3117 | [1] | PAD | |
| 28. | 368-8072 | [1] | PANEL | |
| 29. | 373-4446 B | [1] | PLUG | |
| 30. | 398-8490 | [1] | COVER AS-PANEL | |
| 297-4162 | [1] | FILM-IDENTIFICATION (SWITCH PANEL, UPPER) | ||
| 398-9593 | [1] | FILM-IDENTIFICATION (SWITCH PANEL, LOWER) | ||
| 31. | 417-6775 C | [1] | TRAY | |
| 32. | 419-7776 | [1] | COVER AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 33. | 419-8564 C | [2] | STRAP | |
| 34. | 436-7082 | [1] | TRAY | |
| 35. | 437-8991 | [1] | NET AS (STORAGE) | |
| 36. | 438-8077 C | [1] | BIN-STORAGE | |
| 37. | 438-8078 C | [1] | BIN-STORAGE | |
| 38. | 355-5860 C | [6] | RECEPTACLE (CLIP) | |
| 39. | 441-7480 C | [1] | PLATE AS | |
| 40. | 443-6429 C | [1] | FLOOR MAT AS | |
| 41. | 445-0466 C | [2] | INSERT | |
| 42. | 448-3613 C | [1] | STRAP | |
| 43. | 463-6185 C | [1] | LINER | |
| 44. | 463-6186 C | [1] | LINER | |
| 45. | 104-2091 | [16] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 46. | 111-4627 M | [6] | SCREW-MACHINE (M6X1X30-MM) | |
| 47. | 172-8591 M | [7] | NUT-CLIP (M6X1-THD) | |
| 48. | 195-0936 M | [6] | INSERT-THREADED (M6X1-THD) | |
| 49. | 212-6891 C | [6] | RETAINER | |
| 50. | 232-1473 | [17] | WASHER (6X18X1-MM THK) | |
| 51. | 2V-3726 B | [1] | BUMPER | |
| 52. | 3E-8020 M | [8] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 53. | 4I-3069 | [1] | WASHER-HARD (7X15.5X0.8-MM THK) | |
| 54. | 6K-3273 | [4] | RIVET-POP | |
| 55. | 7X-0579 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 56. | 8C-9660 | [6] | WASHER (4.6X7.9X0.8-MM THK) | |
| 57. | 8R-3695 B | [1] | GROMMET | |
| 58. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 59. | 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | |
| 60. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 61. | 9X-2038 | [9] | WASHER (7X19X2-MM THK) | |
| 62. | 9X-2043 M | [7] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 63. | 9X-2044 CM | [5] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 64. | 9X-2045 CM | [9] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 65. | 5P-5927 D | SEAL (0.9-M) | ||
| 66. | 8T-6936 D | SEAL (0.5-M EACH) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| H | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
#SEBP63941165
300-1870: WINDOW GP-CAB
For full view, you need register
#SEBP63941166
363-6709: WINDOW GP-CAB
For full view, you need register
Parts for your 160M 3 AWD MOTOR GRADER:
CATERPILLAR SIS#SEBP63941167
369-1226: WINDOW GP-CAB
For full view, you need register
Parts for your 160M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 248-2841 | [1] | RELAY AS (24-VOLT) | |
| 2. | 294-1018 | [2] | BRACKET | |
| 3. | 380-3886 | [1] | WINDOW AS-FRONT (HEATED) | |
| 4. | 294-1014 E | SEAL-GLASS (169-CM) | ||
| 5. | 114-6658 | [6] | WASHER (6.5X17X1-MM THK) | |
| 6. | 7K-1181 | [1] | STRAP-CABLE | |
| 7. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 8. | 294-1015 E | SEAL (26-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63941168
381-8143: WINDOW GP-CAB
For full view, you need register
#SEBP63941169
381-8211: WINDOW GP-VENT
381-8211 WINDOW GP-VENT
S/N N9T1-UP
PART OF 361-3140, 387-9586, 387-9587, 555-0543, 555-0544, 555-0545 CAB AR
S/N N9T1-UP
PART OF 361-3140, 387-9586, 387-9587, 555-0543, 555-0544, 555-0545 CAB AR
For full view, you need register
Parts for your 160M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-5059 | [2] | WASHER (15X29.5X2.5-MM THK) | |
| 2. | 341-8342 | [2] | LATCH AS-WINDOW | |
| (EACH INCLUDES) | ||||
| 8Y-8294 | [1] | LATCH AS-WINDOW | ||
| 335-2228 | [1] | PIN-GROOVED | ||
| 332-8658 | [1] | BRACKET | ||
| 3. | 376-9207 | [2] | VENT AS | |
| 4. | 114-6658 | [4] | WASHER (6.5X17X1-MM THK) | |
| 5. | 3E-4302 M | [4] | SCREW-FLAT HEAD (M4X0.7X10-MM) | |
| 6. | 3E-8020 M | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 7. | 148-5355 E | SEAL (42-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
