FRAME AND BODY
ENCLOSURE GPFENDER GP
FRAME AND BODY
ENCLOSURE GP
#SEBP63960740
382-3672: ENCLOSURE GP-ENGINE
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 345-0105 C | [1] | PLATE | |
| 2. | 563-6554 | [1] | COVER AS-ACCESS | |
| 3. | 563-6544 | [1] | COVER AS-ACCESS | |
| 4. | 392-3351 Y | [1] | ENCLOSURE GP-ENGINE (FRONT) | |
| 5. | 563-6560 | [1] | COVER AS-ACCESS | |
| 6. | 433-1472 | [1] | PLATE | |
| 7. | 541-1329 C | [1] | PANEL AS | |
| 8. | 541-1330 C | [1] | PANEL AS | |
| 9. | 545-5315 CY | [1] | DOOR GP-ACCESS (LH) | |
| 10. | 545-5316 CY | [1] | DOOR GP-ACCESS (RH) | |
| 11. | 5P-8522 C | [1] | GROMMET | |
| 12. | 6P-6256 | [4] | RETAINER-SPRING | |
| 13. | 7X-7729 C | [10] | WASHER (11X25X3-MM THK) | |
| 14. | 8T-0389 M | [8] | LOCKNUT (M10X1.5-THD) | |
| 15. | 8T-4186 M | [8] | BOLT (M10X1.5X40-MM) | |
| 16. | 8T-4195 CM | [30] | BOLT (M10X1.5X30-MM) | |
| 17. | 8T-4222 | [28] | WASHER-PLATED (11X32X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63960741
392-3351: ENCLOSURE GP-ENGINE
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 328-2956 | [1] | SUPPORT AS | |
| 2. | 467-0291 | [1] | SUPPORT AS | |
| 3. | 467-0298 | [1] | SUPPORT AS | |
| 4. | 329-5406 | [1] | SUPPORT AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [4] | NUT-WELD (M12X1.75-THD) | ||
| 8Y-3795 M | [1] | BOSS (M10X1.5X39-MM) | ||
| 5. | 332-3594 | [1] | POST AS (BOTTOM, RH) | |
| 6. | 332-3595 | [1] | BRACKET AS | |
| 7. | 332-3596 | [1] | POST AS (TOP, RH) | |
| 8. | 335-5930 | [2] | BRACKET | |
| 9. | 340-7701 Y | [1] | BRACKET GP-MOUNTING (CLEAN EMISSIONS MODULE, RH) | |
| 10. | 340-7706 Y | [1] | BRACKET GP-MOUNTING (CLEAN EMISSIONS MODULE, LH) | |
| 11. | 361-4354 | [1] | BRACKET AS | |
| 12. | 392-3352 | [1] | SUPPORT AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 8T-3490 M | [12] | NUT-WELD (M10X1.5-THD) | ||
| 13. | 425-7451 | [1] | SUPPORT AS | |
| 8T-3490 M | [7] | NUT-WELD (M10X1.5-THD) | ||
| 159-9539 M | [4] | NUT-WELD (M6X1-THD) | ||
| 14. | 439-1784 | [1] | PLATFORM AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [8] | LINK | ||
| 7Y-6338 M | [1] | BOSS (M10X1.5X70-MM) | ||
| 7Y-8763 M | [2] | BOSS (M10X1.5X25-MM) | ||
| 8T-3490 M | [29] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 8Y-3795 M | [2] | BOSS (M10X1.5X39-MM) | ||
| 9G-9155 | [1] | CLIP | ||
| 9R-2613 M | [2] | BOSS-WELD (M10X1.5X25-MM) | ||
| 9R-2672 M | [2] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 9X-2032 M | [6] | NUT-WELD (M4X0.7-THD) | ||
| 130-5300 | [3] | CLIP | ||
| 190-0544 M | [3] | BOSS-THREADED (M10X1.5-MM THD) | ||
| 15. | 440-9224 | [1] | SUPPORT AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [7] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [4] | NUT-WELD (M12X1.75-THD) | ||
| 16. | 7X-2549 M | [4] | BOLT (M12X1.75X100-MM) | |
| 17. | 7X-3391 | [28] | WASHER-HARD (13.5X32X6-MM THK) | |
| 18. | 8T-4121 | [13] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
| 21. | 8T-4195 M | [15] | BOLT (M10X1.5X30-MM) | |
| 22. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 8T-4956 M | [24] | BOLT (M12X1.75X35-MM) | |
| 24. | 7X-7729 | [7] | WASHER (11X25X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63960742
392-3351: ENCLOSURE GP-ENGINE
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 328-2956 | [1] | SUPPORT AS | |
| 2. | 519-7387 C | [1] | SUPPORT AS | |
| 3. | 519-7388 C | [1] | SUPPORT AS | |
| 4. | 329-5406 | [1] | SUPPORT AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [4] | NUT-WELD (M12X1.75-THD) | ||
| 8Y-3795 M | [1] | BOSS (M10X1.5X39-MM) | ||
| 5. | 332-3594 | [1] | POST AS (BOTTOM, RH) | |
| 6. | 332-3595 | [1] | BRACKET AS | |
| 7. | 332-3596 | [1] | POST AS (TOP, RH) | |
| 8. | 335-5930 | [2] | BRACKET | |
| 9. | 340-7701 Y | [1] | BRACKET GP-MOUNTING (CLEAN EMISSIONS MODULE, RH) | |
| 10. | 340-7706 Y | [1] | BRACKET GP-MOUNTING (CLEAN EMISSIONS MODULE, LH) | |
| 11. | 361-4354 | [1] | BRACKET AS | |
| 12. | 519-7435 C | [1] | SUPPORT AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 8T-3490 M | [13] | NUT-WELD (M10X1.5-THD) | ||
| 13. | 498-5537 C | [1] | HOOD AS | |
| 8T-3490 M | [7] | NUT-WELD (M10X1.5-THD) | ||
| 159-9539 M | [4] | NUT-WELD (M6X1-THD) | ||
| 14. | 439-1784 | [1] | PLATFORM AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [8] | LINK | ||
| 7Y-6338 M | [1] | BOSS (M10X1.5X70-MM) | ||
| 7Y-8763 M | [2] | BOSS (M10X1.5X25-MM) | ||
| 8T-3490 M | [29] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 8Y-3795 M | [2] | BOSS (M10X1.5X39-MM) | ||
| 9G-9155 | [1] | CLIP | ||
| 9R-2613 M | [2] | BOSS-WELD (M10X1.5X25-MM) | ||
| 9R-2672 M | [2] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 9X-2032 M | [6] | NUT-WELD (M4X0.7-THD) | ||
| 130-5300 | [3] | CLIP | ||
| 190-0544 M | [3] | BOSS-THREADED (M10X1.5-MM THD) | ||
| 15. | 440-9224 | [1] | SUPPORT AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [7] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [4] | NUT-WELD (M12X1.75-THD) | ||
| 16. | 7X-2549 M | [4] | BOLT (M12X1.75X100-MM) | |
| 17. | 7X-3391 C | [36] | WASHER-HARD (13.5X32X6-MM THK) | |
| 21. | 8T-4195 CM | [20] | BOLT (M10X1.5X30-MM) | |
| 23. | 8T-4956 CM | [32] | BOLT (M12X1.75X35-MM) | |
| 24. | 7X-7729 C | [20] | WASHER (11X25X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63960743
392-3351: ENCLOSURE GP-ENGINE
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 329-1798 C | [2] | GUIDE | |
| 2. | 340-7701 Y | [1] | BRACKET GP-MOUNTING (CLEAN EMISSIONS MODULE, RH) | |
| 3. | 340-7706 Y | [1] | BRACKET GP-MOUNTING (CLEAN EMISSIONS MODULE, LH) | |
| 4. | 499-1442 C | [2] | BRACKET AS | |
| 5. | 499-1443 C | [1] | BRACKET AS | |
| 332-3595 | [1] | BRACKET AS | ||
| 6. | 499-1445 C | [1] | BRACKET AS | |
| 361-4354 | [1] | BRACKET AS | ||
| 7. | 563-8615 C | [1] | SUPPORT AS | |
| 8. | 525-0439 C | [1] | SUPPORT AS | |
| 9. | 525-0465 C | [2] | PLATE AS | |
| 10. | 525-0479 C | [1] | BRACKET AS | |
| 11. | 527-2466 C | [1] | SUPPORT AS | |
| 12. | 527-2470 C | [1] | HOOD AS | |
| 13. | 537-5528 C | [4] | HINGE | |
| 14. | 542-9383 C | [1] | SUPPORT AS | |
| 15. | 542-9384 C | [1] | POST AS | |
| 16. | 542-9385 C | [1] | POST AS | |
| 17. | 547-7303 C | [1] | SUPPORT AS | |
| 18. | 547-7305 C | [1] | SUPPORT AS | |
| 19. | 548-1897 C | [1] | PLATFORM AS | |
| 439-1784 | [1] | PLATFORM AS | ||
| 20. | 6V-7744 CM | [4] | LOCKNUT (M10X1.5-THD) | |
| 21. | 7X-2549 M | [4] | BOLT (M12X1.75X100-MM) | |
| 22. | 7X-3391 | [36] | WASHER-HARD (13.5X32X6-MM THK) | |
| 23. | 7X-7729 C | [30] | WASHER (11X25X3-MM THK) | |
| 24. | 8T-4121 C | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4195 CM | [30] | BOLT (M10X1.5X30-MM) | |
| 26. | 8T-4224 C | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 8T-4908 CM | [8] | BOLT (M8X1.25X25-MM) | |
| 28. | 8T-4956 M | [32] | BOLT (M12X1.75X35-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63960744
323-3601: FASTENER GP-ENCLOSURE
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-1387 | [4] | WASHER (10.26X22.22X1.9-MM THK) | |
| 2. | 8X-1904 | [4] | SPACER (20X35X26-MM THK) | |
| 3. | 155-0576 | [28] | MOUNT-ISOLATION | |
| 4. | 325-6298 | [1] | PLATE AS | |
| 5. | 325-6299 | [1] | PLATE AS | |
| 6. | 329-5417 | [1] | MOUNT (LH) | |
| 7. | 329-6737 | [1] | MOUNT (RH) | |
| 8. | 331-1946 | [1] | PLATE AS | |
| 9. | 331-5275 | [1] | BRACKET | |
| 10. | 331-5276 | [1] | BRACKET | |
| 11. | 332-3578 | [14] | SPACER (8.2X12.7X22.8-MM THK) | |
| 12. | 344-6640 | [2] | HANDRAIL AS | |
| 13. | 345-0104 | [2] | ROD AS | |
| 14. | 345-6639 | [8] | GASKET | |
| 15. | 345-7601 | [2] | PLATE AS | |
| 16. | 345-7603 | [2] | PLATE AS | |
| 17. | 346-8641 | [1] | PLATE AS | |
| 18. | 350-9265 | [2] | PLATE AS | |
| 19. | 350-9266 | [2] | BRACKET | |
| 20. | 435-5165 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 21. | 444-2188 | [14] | NUT-CLIP | |
| 22. | 099-3649 M | [2] | BOLT (M8X1.25X40-MM) | |
| 23. | 198-4780 | [4] | WASHER-HARD (17.5X32X8-MM THK) | |
| 24. | 302-3908 | [2] | SPACER (11X20X30-MM THK) | |
| 25. | 303-8205 M | [2] | BOLT (M8X1.25X60-MM) | |
| 26. | 344-5674 M | [2] | NUT (M8X1.25-THD) | |
| 27. | 3B-4615 | [6] | PIN-COTTER | |
| 28. | 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 29. | 7X-0579 | [42] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 30. | 7X-0613 | [24] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 31. | 7X-0818 M | [12] | BOLT (M8X1.25X45-MM) | |
| 32. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 33. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 35. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 36. | 8T-4140 M | [8] | BOLT (M16X2X60-MM) | |
| 37. | 8T-4175 M | [8] | BOLT (M16X2X90-MM) | |
| 38. | 8T-4193 M | [4] | BOLT (M16X2X50-MM) | |
| 39. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 40. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 41. | 8T-4908 M | [12] | BOLT (M8X1.25X25-MM) | |
| 42. | 8T-5091 M | [4] | BOLT (M8X1.25X20-MM) | |
| 43. | 8T-5093 M | [46] | BOLT-LOCKING (M8X1.25X25-MM) | |
| 44. | 9R-2620 | [2] | PLUG | |
| 45. | 3E-9411 | [8] | WASHER-HARD (17.5X38X6-MM THK) | |
| 46. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 47. | 123-3827 E | SEAL (125-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63960745
262-0412: FENDER & SUPPORT GP
262-0412 FENDER & SUPPORT GP -FRONT
S/N N9B1-UP
Type 1
FOR USE WITH ALL WHEEL DRIVE ARRANGEMENT
S/N N9B1-UP
Type 1
FOR USE WITH ALL WHEEL DRIVE ARRANGEMENT
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 246-3483 | [8] | PLATE | |
| 2. | 246-3486 | [2] | FENDER | |
| 3. | 262-3963 | [2] | SUPPORT AS | |
| 4. | 262-3969 | [1] | TUBE AS (RH) | |
| 5. | 262-3970 | [1] | TUBE AS (RH) | |
| 6. | 262-3971 | [1] | TUBE AS (LH) | |
| 7. | 262-3972 | [1] | TUBE AS (LH) | |
| 8. | 271-3567 M | [16] | BOLT (M10X1.5X86-MM) | |
| 9. | 145-5181 | [12] | SPACER (13.5X25X12-MM THK) | |
| 10. | 6V-9189 M | [16] | LOCKNUT (M8X1.25-THD) | |
| 11. | 8T-4121 | [32] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4133 M | [16] | NUT (M10X1.5-THD) | |
| 13. | 8T-4183 M | [12] | BOLT (M12X1.75X40-MM) | |
| 14. | 8T-4224 | [32] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 8T-6870 M | [16] | BOLT (M8X1.25X70-MM) | |
| 16. | 313-5270 | [2] | REFLECTOR (AMBER) | |
| M | METRIC PART | |||
#SEBP63960746
262-0412: FENDER & SUPPORT GP
262-0412 FENDER & SUPPORT GP -FRONT
S/N N9B1-UP
Type 2
FOR USE WITH ALL WHEEL DRIVE ARRANGEMENT
S/N N9B1-UP
Type 2
FOR USE WITH ALL WHEEL DRIVE ARRANGEMENT
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 246-3483 | [8] | PLATE | |
| 2. | 530-1615 | [2] | FENDER | |
| 3. | 262-3963 | [2] | SUPPORT AS | |
| 4. | 313-5270 | [2] | REFLECTOR (AMBER) | |
| 5. | 449-7711 C | [8] | SUPPORT | |
| 6. | 449-7713 C | [2] | PLATE | |
| 7. | 465-0610 C | [1] | BRACKET | |
| 8. | 465-0611 C | [1] | BRACKET | |
| 9. | 465-0612 C | [1] | BRACKET | |
| 10. | 465-0613 C | [1] | BRACKET | |
| 11. | 465-0614 C | [1] | BRACKET | |
| 12. | 465-0615 C | [1] | BRACKET | |
| 13. | 145-5181 | [12] | SPACER (13.5X25X12-MM THK) | |
| 14. | 344-5675 CM | [16] | NUT (M10X1.5-THD) | |
| 15. | 6V-9189 M | [16] | LOCKNUT (M8X1.25-THD) | |
| 16. | 7X-7729 C | [32] | WASHER (11X25X3-MM THK) | |
| 17. | 8T-3647 CM | [16] | BOLT (M8X1.25X80-MM) | |
| 18. | 8T-4121 C | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4172 CM | [4] | BOLT (M10X1.5X80-MM) | |
| 20. | 8T-4183 CM | [8] | BOLT (M12X1.75X40-MM) | |
| 21. | 8T-4186 CM | [16] | BOLT (M10X1.5X40-MM) | |
| 22. | 8T-4194 CM | [4] | BOLT (M12X1.75X50-MM) | |
| 23. | 8T-4224 | [16] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 5P-4116 | [16] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 25. | 6V-7744 M | [4] | LOCKNUT (M10X1.5-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP63960747
262-0413: FENDER & SUPPORT GP
262-0413 FENDER & SUPPORT GP -REAR
S/N N9B1-UP
PART OF 394-3871 OPTION AR-REGIONAL
Type 1
CANNOT BE USED WITH @@@@@394-3871@@@@@
S/N N9B1-UP
PART OF 394-3871 OPTION AR-REGIONAL
Type 1
CANNOT BE USED WITH @@@@@394-3871@@@@@
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6450 C | [4] | SPACER (17X35X30-MM THK) | |
| 2. | 502-9305 C | [1] | SUPPORT AS | |
| 3. | 502-9306 C | [1] | SUPPORT AS | |
| (EACH SUPPORT AS INCLUDES) | ||||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 4. | 502-9307 C | [1] | SUPPORT AS | |
| 5. | 502-9308 C | [1] | SUPPORT AS | |
| (EACH SUPPORT AS INCLUDES) | ||||
| 8T-3490 M | [6] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 6. | 251-1140 | [2] | FENDER | |
| 8. | 333-0486 | [1] | COVER | |
| 9. | 284-8450 | [10] | SUPPORT AS | |
| 10. | 333-0492 | [1] | BRACKET AS | |
| 11. | 251-1153 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 12. | 333-0490 | [1] | BRACKET AS | |
| 13. | 251-2449 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 14. | 251-4378 | [2] | FENDER | |
| 15. | 333-0493 | [2] | BRACKET AS | |
| 17. | 333-0489 | [1] | COVER | |
| 18. | 7X-0818 M | [10] | BOLT (M8X1.25X45-MM) | |
| 19. | 5P-4116 | [44] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 20. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 21. | 8T-4189 M | [20] | BOLT (M8X1.25X20-MM) | |
| 22. | 8T-4779 M | [8] | BOLT (M16X2X35-MM) | |
| 23. | 8T-4908 M | [24] | BOLT (M8X1.25X25-MM) | |
| 24. | 9X-8257 | [12] | WASHER (17.5X30X3.5-MM THK) | |
| 25. | 7X-7729 | [20] | WASHER (11X25X3-MM THK) | |
| 26. | 8T-4182 M | [20] | BOLT (M10X1.5X45-MM) | |
| 27. | 8T-7934 | [10] | WASHER-HARD (11X21X5-MM THK) | |
| 28. | 384-1628 | [10] | WASHER-HARD (8.8X35X4-MM THK) | |
| 29. | 313-5271 | [2] | REFLECTOR-RED | |
| 30. | 333-0487 | [1] | COVER | |
| 31. | 333-0488 | [1] | COVER | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP63960748
262-0413: FENDER & SUPPORT GP
262-0413 FENDER & SUPPORT GP -REAR
S/N N9B1-UP
PART OF 394-3871 OPTION AR-REGIONAL
Type 2
CANNOT BE USED WITH @@@@@394-3871@@@@@
S/N N9B1-UP
PART OF 394-3871 OPTION AR-REGIONAL
Type 2
CANNOT BE USED WITH @@@@@394-3871@@@@@
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6450 | [4] | SPACER (17X35X30-MM THK) | |
| 2. | 502-9305 | [1] | SUPPORT AS | |
| 3. | 502-9306 | [1] | SUPPORT AS | |
| (EACH SUPPORT AS INCLUDES) | ||||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 4. | 502-9307 | [1] | SUPPORT AS | |
| 5. | 502-9308 | [1] | SUPPORT AS | |
| (EACH SUPPORT AS INCLUDES) | ||||
| 8T-3490 M | [6] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 6. | 530-1616 | [2] | FENDER | |
| 8. | 333-0486 | [1] | COVER | |
| 9. | 284-8450 | [10] | SUPPORT AS | |
| 10. | 333-0492 | [1] | BRACKET AS | |
| 11. | 251-1153 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 12. | 333-0490 | [1] | BRACKET AS | |
| 13. | 251-2449 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 14. | 530-1617 | [2] | FENDER | |
| 15. | 333-0493 | [2] | BRACKET AS | |
| 17. | 333-0489 | [1] | COVER | |
| 18. | 7X-0818 M | [10] | BOLT (M8X1.25X45-MM) | |
| 19. | 5P-4116 | [44] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 20. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 21. | 8T-4189 M | [20] | BOLT (M8X1.25X20-MM) | |
| 22. | 8T-4779 M | [8] | BOLT (M16X2X35-MM) | |
| 23. | 8T-4908 M | [24] | BOLT (M8X1.25X25-MM) | |
| 24. | 9X-8257 | [12] | WASHER (17.5X30X3.5-MM THK) | |
| 25. | 7X-7729 | [20] | WASHER (11X25X3-MM THK) | |
| 26. | 8T-4182 M | [20] | BOLT (M10X1.5X45-MM) | |
| 27. | 198-4776 C | [10] | WASHER-HARD (8.8X20X8-MM THK) | |
| 29. | 313-5271 | [2] | REFLECTOR-RED | |
| 30. | 333-0487 | [1] | COVER | |
| 31. | 333-0488 | [1] | COVER | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP63960749
568-3669: FENDER GP-REAR
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6450 | [4] | SPACER (17X35X30-MM THK) | |
| 2. | 306-1802 J | [4] | FILM-WARNING (FALLING HAZARD, READ OMM) | |
| 3. | 306-1803 L | [4] | FILM-WARNING (FALLING HAZARD, READ OMM) | |
| 4. | 313-5270 | [2] | REFLECTOR (AMBER) | |
| 5. | 313-5271 | [2] | REFLECTOR-RED | |
| 6. | 449-7691 | [2] | FENDER | |
| 7. | 495-2457 | [2] | FENDER | |
| 8. | 519-8446 | [10] | SUPPORT | |
| 9. | 519-8448 | [10] | PLATE AS | |
| 10. | 527-0821 | [1] | PLATE AS | |
| 11. | 527-0822 | [1] | PLATE AS | |
| 12. | 527-0823 | [1] | PLATE AS | |
| 13. | 527-0824 | [1] | PLATE AS | |
| 14. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 15. | 7X-7729 | [20] | WASHER (11X25X3-MM THK) | |
| 16. | 8T-4186 M | [20] | BOLT (M10X1.5X40-MM) | |
| 17. | 8T-4779 M | [8] | BOLT (M16X2X35-MM) | |
| 18. | 8T-6466 M | [20] | BOLT (M10X1.5X60-MM) | |
| 19. | 8T-7934 | [20] | WASHER-HARD (11X21X5-MM THK) | |
| 20. | 9X-8257 | [12] | WASHER (17.5X30X3.5-MM THK) | |
| J | FOR MACHINES WITH FILM GP IN U.S. MARKETS | |||
| L | FOR MACHINES WITH FILM GP IN INTERNATIONAL MARKETS | |||
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 12M 3 AWD :
Truck sale:
219,500
