OPERATOR STATION
CONTROL GPPEDAL GP
CAB GP
SEAT GP
MONITOR GP
OPERATOR STATION
CONTROL GP
#SEBP63961040
441-0358: CONTROL GP-JOYSTICK
441-0358 CONTROL GP-JOYSTICK -LH
S/N N9B1-UP
PART OF 442-0054 CONTROL & MTG GP-JOYSTICK
S/N N9B1-UP
PART OF 442-0054 CONTROL & MTG GP-JOYSTICK
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 144-0331 | [2] | CAP-PUSH BUTTON (YELLOW)(AUTOMATIC, MANUAL) | |
| 2. | 360-2987 Y | [1] | CONTROL GP-JOYSTICK (LH) | |
| 3. | 434-2232 Y | [1] | CONTROL GP-JOYSTICK (LH) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 442-0052 | [1] | KIT-JOYSTICK (ATTACHMENT) | ||
| (INCLUDES TAPE, SCREWS, BOLT, NUTS, TORX BIT & WASHERS) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63961041
441-0362: CONTROL GP-JOYSTICK
441-0362 CONTROL GP-JOYSTICK -RH
S/N N9B1-UP
PART OF 442-0054 CONTROL & MTG GP-JOYSTICK
S/N N9B1-UP
PART OF 442-0054 CONTROL & MTG GP-JOYSTICK
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 144-0331 | [2] | CAP-PUSH BUTTON (YELLOW) | |
| 2. | 348-6995 Y | [1] | CONTROL GP-JOYSTICK (RH) | |
| 3. | 434-2233 Y | [1] | CONTROL GP-JOYSTICK (RH) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 442-0052 | [1] | KIT-JOYSTICK | ||
| (INCLUDES TAPE, TAPE REMOVAL TOOLS, SCREWS, NUTS, BOLT, TORX BIT & WASHERS) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63961042
458-8701: CONTROL GP-JOYSTICK
458-8701 CONTROL GP-JOYSTICK
S/N N9B1-UP
PERFORMANCE CONTROL MODULES
PART OF 541-4988, 541-4990, 541-4991, 541-4992, 541-4996, 541-4998, 541-5000, 541-5002, 541-5003, 541-5006, 541-5007, 542-8771, 542-8772 CAB AR, 492-3595 OPTION AR-GRADE CONTROL
CANNOT BE USED WITH @@@@@357-9151@@@@@
S/N N9B1-UP
PERFORMANCE CONTROL MODULES
PART OF 541-4988, 541-4990, 541-4991, 541-4992, 541-4996, 541-4998, 541-5000, 541-5002, 541-5003, 541-5006, 541-5007, 542-8771, 542-8772 CAB AR, 492-3595 OPTION AR-GRADE CONTROL
CANNOT BE USED WITH @@@@@357-9151@@@@@
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS#SEBP63961043
393-6163: CONTROL GP-PEDAL
393-6163 CONTROL GP-PEDAL
S/N N9B1-UP
PART OF 394-3755, 526-2563 CONVERSION AR-CERTIFICATION, 394-3871 OPTION AR-REGIONAL
S/N N9B1-UP
PART OF 394-3755, 526-2563 CONVERSION AR-CERTIFICATION, 394-3871 OPTION AR-REGIONAL
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 390-0899 Y | [1] | PEDAL GP-BRAKE, XMSN & GOV | |
| 2. | 249-4091 | [4] | BLOCK | |
| 3. | 252-1811 Y | [1] | LINES GP-ACCUMULATOR (BRAKE) | |
| 4. | 253-3476 | [1] | PLATE AS | |
| 5. | 281-9356 | [3] | PLATE | |
| 6. | 286-5672 | [1] | PLATE AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 124-2528 | [2] | SPACER (11X20X10-MM THK) | ||
| 7. | 8T-6466 M | [3] | BOLT (M10X1.5X60-MM) | |
| 8. | 5P-9299 | [5] | CLIP (LOOP) | |
| 9. | 361-3138 | [4] | CLAMP | |
| 10. | 8T-4121 | [18] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 13. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 14. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 15. | 8T-4222 | [3] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 16. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63961044
393-6164: CONTROL GP-PEDAL
393-6164 CONTROL GP-PEDAL
S/N N9B1-UP
PART OF 541-4987, 541-4988, 541-4989, 541-4991, 541-4994, 541-4995, 541-4997, 541-4998, 541-4999, 541-5000, 541-5001, 541-5002, 541-5003, 541-5006, 541-5009, 542-8772 CAB AR, 385-9297, 471-9566 CONTROL AR-HYDRAULIC, 394-3874 CONVERSION AR-MACHINE
S/N N9B1-UP
PART OF 541-4987, 541-4988, 541-4989, 541-4991, 541-4994, 541-4995, 541-4997, 541-4998, 541-4999, 541-5000, 541-5001, 541-5002, 541-5003, 541-5006, 541-5009, 542-8772 CAB AR, 385-9297, 471-9566 CONTROL AR-HYDRAULIC, 394-3874 CONVERSION AR-MACHINE
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 390-0899 Y | [1] | PEDAL GP-BRAKE, XMSN & GOV | |
| 2. | 249-4091 | [4] | BLOCK | |
| 3. | 253-3476 | [1] | PLATE AS | |
| 4. | 281-9356 | [3] | PLATE | |
| 5. | 286-5672 | [1] | PLATE AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 356-4257 Y | [1] | LINES GP-ACCUMULATOR (BRAKE) | |
| 7. | 8T-6466 M | [3] | BOLT (M10X1.5X60-MM) | |
| 8. | 5P-9299 | [5] | CLIP (LOOP) | |
| 9. | 361-3138 | [4] | CLAMP | |
| 10. | 8T-4121 | [18] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 13. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 14. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 15. | 8T-4222 | [3] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 16. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63961045
363-4962: COVER GP-CAB
363-4962 COVER GP-CAB
S/N N9B1-UP
PART OF 361-3140, 387-9586, 387-9587, 468-5718, 471-8635, 555-0543, 555-0544, 555-0545 CAB AR
S/N N9B1-UP
PART OF 361-3140, 387-9586, 387-9587, 468-5718, 471-8635, 555-0543, 555-0544, 555-0545 CAB AR
For full view, you need register
#SEBP63961046
252-1805: CUSHION GP-ARM
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS#SEBP63961047
439-7515: DISPLAY GP-CAMERA
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(CAMERA) | |
| 2. | 251-8248 | [1] | CABLE AS-COMMUNICATION | |
| 3. | 333-8153 | [2] | CONNECTION AS | |
| 4. | 361-3146 | [1] | PLATE | |
| 5. | 438-3109 | [1] | HARNESS AS-PANEL | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 100-5041 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [14] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [13] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [13] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 6. | 464-6049 | [1] | MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM) | |
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 441-8382 | [1] | PLATE AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 8. | 3E-6924 M | [1] | SCREW-TRUSS HEAD (M6X1X50-MM) | |
| 9. | 3S-2093 | [10] | STRAP-CABLE | |
| 10. | 8T-2226 M | [4] | SCREW-MACHINE (M5X0.8X10-MM) | |
| 11. | 9X-2043 M | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 12. | 9X-8267 | [4] | WASHER (6.6X12X2-MM THK) | |
| 13. | 261-3223 | [1] | CABLE AS-COMMUNICATION | |
| 14. | 8K-6211 | [3] | CLIP | |
| 15. | 2V-8260 | [1] | GROMMET | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63961048
447-2229: DISPLAY GP-CAMERA
447-2229 DISPLAY GP-CAMERA
S/N N9B1-UP
PART OF 541-4987, 541-4988, 541-4990, 541-4991, 541-4992, 541-4994, 541-4995, 541-4996, 541-4997, 541-4999, 541-5000, 541-5001, 541-5002, 541-5005, 541-5006, 541-5007, 541-5009, 542-8771, 542-8772 CAB AR, 396-3921 CAMERA AR
S/N N9B1-UP
PART OF 541-4987, 541-4988, 541-4990, 541-4991, 541-4992, 541-4994, 541-4995, 541-4996, 541-4997, 541-4999, 541-5000, 541-5001, 541-5002, 541-5005, 541-5006, 541-5007, 541-5009, 542-8771, 542-8772 CAB AR, 396-3921 CAMERA AR
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 251-8248 | [1] | CABLE AS-COMMUNICATION | |
| 2. | 333-8153 | [1] | CONNECTION AS | |
| 3. | 464-6047 | [1] | MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM) | |
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 344-3847 | [1] | CABLE AS (DISPLAY) | ||
| 4. | 3S-2093 | [11] | STRAP-CABLE | |
| 5. | 8T-2226 M | [4] | SCREW-MACHINE (M5X0.8X10-MM) | |
| 6. | 9X-8267 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP63961049
451-6020: DISPLAY GP-CAMERA
For full view, you need register
Parts for your 12M 3 AWD MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(CAMERA) | |
| 2. | 3S-2093 | [10] | STRAP-CABLE | |
| 3. | 251-8248 | [1] | CABLE AS-COMMUNICATION | |
| 4. | 268-8643 | [1] | CABLE AS (6-M) | |
| 5. | 333-8153 | [2] | CONNECTION AS | |
| 6. | 438-3109 | [1] | HARNESS AS-PANEL | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 100-5041 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [14] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [13] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [13] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 7. | 440-4779 | [1] | MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM) | |
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 440-4780 | [1] | CABLE AS | ||
| 8. | 441-8382 | [1] | PLATE AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 9. | 8T-2226 M | [4] | SCREW-MACHINE (M5X0.8X10-MM) | |
| 10. | 9X-2043 M | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 11. | 9X-8267 | [4] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 12M 3 AWD :
Truck sale:
219,500
