ELECTRICAL AND STARTING SYSTEM
LIGHTING GPSTARTING MOTOR GP
CONTROL GP-GRADE
RADIO GP
RELAY GP
SENSOR GP
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
#SEBP63970440
308-9370: MOUNTING GP-LIGHTING
308-9370 MOUNTING GP-LIGHTING -ROADING LIGHTS
S/N N9D1-UP
LOW BAR
PART OF 309-9879 LIGHTING GP-ROADING
Type 2
CANNOT BE USED WITH @@@@@308-9371@@@@@
S/N N9D1-UP
LOW BAR
PART OF 309-9879 LIGHTING GP-ROADING
Type 2
CANNOT BE USED WITH @@@@@308-9371@@@@@
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-0617 | [2] | CLAMP | |
| 2. | 2G-0988 | [2] | CAP | |
| 3. | 3K-9520 | [3] | GROMMET | |
| 4. | 137-9410 | [2] | CLAMP | |
| 5. | 553-2611 CY | [1] | HARNESS AS-LIGHTING (BAR) | |
| 6. | 250-4330 | [1] | TUBE | |
| 7. | 331-3710 | [2] | BRACKET AS | |
| 8. | 259-9288 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, RH) | |
| 9. | 259-9287 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, LH) | |
| 10. | 130-5300 | [2] | CLIP | |
| 11. | 130-5301 | [2] | CLIP | |
| 12. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 5P-9135 | [1] | GROMMET | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 344-5675 CM | [2] | NUT (M10X1.5-THD) | |
| 17. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 18. | 8T-5001 M | [4] | BOLT (M12X1.75X130-MM) | |
| 19. | 7K-1181 | [1] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63970441
308-9371: MOUNTING GP-LIGHTING
308-9371 MOUNTING GP-LIGHTING -ROADING
S/N N9D1-UP
HIGH BAR
PART OF 309-9881 LIGHTING AR-ROADING, 396-1966 SNOW AR-MOTOR GRADER
Type 1
S/N N9D1-UP
HIGH BAR
PART OF 309-9881 LIGHTING AR-ROADING, 396-1966 SNOW AR-MOTOR GRADER
Type 1
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-0617 | [2] | CLAMP | |
| 2. | 2G-0988 | [2] | CAP | |
| 3. | 3K-9520 | [3] | GROMMET | |
| 4. | 137-9410 | [2] | CLAMP | |
| 5. | 236-2335 | [1] | HARNESS AS-FRONT LIGHTING | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 9W-0844 | [10] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (80-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6. | 246-1672 | [1] | TUBE | |
| 7. | 331-3710 | [2] | BRACKET AS | |
| 8. | 259-9288 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, RH) | |
| 9. | 259-9287 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, LH) | |
| 10. | 130-5300 | [2] | CLIP | |
| 11. | 130-5301 | [2] | CLIP | |
| 12. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 5P-9135 | [1] | GROMMET | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 17. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 18. | 8T-5001 M | [4] | BOLT (M12X1.75X130-MM) | |
| 19. | 7K-1181 | [1] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63970442
308-9371: MOUNTING GP-LIGHTING
308-9371 MOUNTING GP-LIGHTING -ROADING
S/N N9D1-UP
HIGH BAR
PART OF 309-9881 LIGHTING AR-ROADING
Type 2
S/N N9D1-UP
HIGH BAR
PART OF 309-9881 LIGHTING AR-ROADING
Type 2
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-0617 | [2] | CLAMP | |
| 2. | 2G-0988 | [2] | CAP | |
| 3. | 3K-9520 | [3] | GROMMET | |
| 4. | 137-9410 | [2] | CLAMP | |
| 5. | 553-2611 CY | [1] | HARNESS AS-LIGHTING (BAR) | |
| 6. | 246-1672 | [1] | TUBE | |
| 7. | 331-3710 | [2] | BRACKET AS | |
| 8. | 259-9288 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, RH) | |
| 9. | 259-9287 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, LH) | |
| 10. | 130-5300 | [2] | CLIP | |
| 11. | 130-5301 | [2] | CLIP | |
| 12. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 5P-9135 | [1] | GROMMET | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 344-5675 CM | [2] | NUT (M10X1.5-THD) | |
| 17. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 18. | 8T-5001 M | [4] | BOLT (M12X1.75X130-MM) | |
| 19. | 7K-1181 | [1] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63970443
3T-9525: PLATE AS-BRUSH
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-0372 | [1] | PLATE | |
| 2. | 6T-0371 | [1] | INSULATOR | |
| 3. | 9F-5599 | [12] | LOCKWASHER | |
| 4. | 6T-0363 | [6] | HOLDER AS-BRUSH | |
| (EACH INCLUDES) | ||||
| 3T-9494 | [1] | SPRING | ||
| 5. | 3T-4709 | [3] | PLATE | |
| 6. | 3T-4710 | [3] | PLATE | |
| 7. | 2L-6679 | [3] | PLATE-INSULATOR | |
| 8. | 7F-3525 | [6] | WASHER-SPECIAL (0.207X0.39X0.09-IN THK) | |
| 9. | 5P-6298 | [12] | SCREW-MACHINE (10-32X0.5-IN) | |
#SEBP63970444
283-7960: POWER SUPPLY GP
283-7960 POWER SUPPLY GP -GRADE CONTROL
S/N N9D1-UP
PART OF 360-7617, 459-3196 GRADE CONTROL GP
S/N N9D1-UP
PART OF 360-7617, 459-3196 GRADE CONTROL GP
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS#SEBP63970445
336-3545: RADIO GP-COMMUNICATION
336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N N9D1-UP
PART OF 373-6739 INSTALLATION AR-COMMUNICATION
S/N N9D1-UP
PART OF 373-6739 INSTALLATION AR-COMMUNICATION
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 579-8995 | [1] | SOFTWARE GP-COMMUNICATION (PRODUCT LINK 121SR) |
#SEBP63970446
347-1934: RELAY GP
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-1991 | [4] | SPACER (8.2X13X15-MM THK) | |
| 2. | 350-0036 | [1] | RELAY AS (24-VOLT)(ARD NOZZLE HEATER) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5009 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 3. | 343-3877 | [1] | PLATE AS | |
| 4. | 9X-2480 M | [6] | BOLT (M6X1X45-MM) | |
| 5. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP63970447
457-5046: SENSOR & MOUNTING GP
457-5046 SENSOR & MOUNTING GP
S/N N9D1-UP
ANTI BOUNCE
PART OF 458-2072 CONTROL AR-ELECTRIC
S/N N9D1-UP
ANTI BOUNCE
PART OF 458-2072 CONTROL AR-ELECTRIC
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 333-8538 | [1] | SENSOR AS-INERTIAL (ACCELERATION, ANGLE) | |
| 386-0444 | [1] | HARNESS AS-SENSOR | ||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 112-4550 E | SLEEVE (20-CM) | |||
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 457-2082 | [1] | BRACKET AS | |
| 3. | 130-5300 | [1] | CLIP | |
| 4. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 5. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 7. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63970448
416-4728: SENSOR & MTG GP-PRESSURE
416-4728 SENSOR & MTG GP-PRESSURE
S/N N9D1-UP
PART OF 394-5350 MODULE AR-CLEAN EMISSIONS
S/N N9D1-UP
PART OF 394-5350 MODULE AR-CLEAN EMISSIONS
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0472 | [2] | ADAPTER | |
| 2. | 292-6476 | [2] | CLAMP | |
| 3. | 385-5773 | [1] | CONNECTOR AS | |
| 5P-1046 | [1] | CONNECTOR | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 4. | 398-3755 Y | [1] | SENSOR GP-PRESSURE (EXHAUST) | |
| 5. | 415-2415 | [2] | HOSE-AIR | |
| 6. | 416-4739 | [1] | BRACKET | |
| 7. | 417-1466 | [1] | TUBE AS | |
| 8. | 417-1685 | [1] | TUBE AS | |
| 9. | 417-1748 | [1] | TUBE AS | |
| 10. | 124-6275 | [4] | CLAMP-HOSE | |
| 11. | 204-0813 | [3] | BOLT (M6X1X40-MM) | |
| 12. | 242-2961 | [3] | SPACER (7X16X12-MM THK) | |
| 13. | 313-9614 | [1] | ADAPTER AS | |
| 2R-6806 | [1] | CONNECTOR | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 14. | 344-1200 | [6] | WASHER-HARD (6.6X12X2-MM THK) | |
| 15. | 344-1206 M | [2] | BOLT (M6X1X16-MM) | |
| 16. | 344-1207 | [1] | BOLT (M6X1X30-MM) | |
| 17. | 344-5673 M | [1] | NUT (M6X1-THD) | |
| 18. | 7W-3556 | [2] | WASHER (14.27X20.57X1.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63970449
397-8790: SENSOR GP-ENGINE
397-8790 SENSOR GP-ENGINE
S/N SSE1-UP; SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
Type 1
S/N SSE1-UP; SYE1-UP
PART OF 381-1732 ENGINE AR-CORE
Type 1
For full view, you need register
Parts for your 140M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 3. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (CHARGE AIR) | |
| 4. | 236-6221 Y | [1] | SENSOR GP-SPEED | |
| 5. | 269-4005 | [1] | RECEPTACLE AS-CONNECTOR | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 230-4014 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 6. | 274-6719 | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 7. | 331-1134 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 8. | 332-0296 Y | [1] | SENSOR GP-PRESSURE | |
| 8A. | 332-0296 Y | [1] | SENSOR GP-PRESSURE (NRS ABSOLUTE) | |
| 9. | 339-8822 | [1] | SENSOR AS-TEMPERATURE (NOX REDUCTION SYSTEM) | |
| 281-8802 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 10. | 385-1173 Y | [1] | SENSOR GP-PRESSURE (NRS DIFFERENTIAL) | |
| 11. | 422-4876 | [1] | BRACKET | |
| 12. | 329-5451 | [1] | ADAPTER AS | |
| 9X-0261 | [1] | ADAPTER | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 13. | 331-1136 | [1] | ADAPTER AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 331-1137 | [1] | ADAPTER | ||
| 14. | 3E-4352 | [1] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 15. | 4P-8134 | [1] | CLIP (LADDER) | |
| 16. | 6V-3940 M | [3] | BOLT (M8X1.25X25-MM) | |
| 17. | 6V-5215 M | [1] | BOLT (M8X1.25X16-MM) | |
| 18. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
