ELECTRICAL AND STARTING SYSTEM
WIRING GPLIGHTING GP
SENSOR GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP63990470
380-3060: WIRING GP-GRADE CONTROL
380-3060 WIRING GP-GRADE CONTROL -ACCUGRADE
S/N N9E1-UP
PART OF 394-3913, 394-3915, 462-7928, 462-7929 GRADE CONTROL AR
Type 1
AN ATTACHMENT
S/N N9E1-UP
PART OF 394-3913, 394-3915, 462-7928, 462-7929 GRADE CONTROL AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 160M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-3033 | [16] | SCREW-SOCKET HEAD (4-40X0.5-IN) | |
| 2. | 7K-1181 | [29] | STRAP-CABLE | |
| 3. | 9C-5344 | [2] | SPACER (10.5X20X18-MM THK) | |
| 4. | 9G-7101 | [1] | SPACER (11X20X30-MM THK) | |
| 5. | 132-8487 | [4] | NUT-RING | |
| 6. | 169-5414 | [1] | CLIP | |
| 7. | 236-2356 Y | [1] | HARNESS AS-SENSOR (ANGLE) | |
| 8. | 236-8826 | [4] | BOSS (1-1/8-18X0.708-IN) | |
| 9. | 243-3250 Y | [1] | HARNESS AS-SENSOR (ROTATION) | |
| 10. | 251-1133 | [1] | TUBE | |
| 11. | 255-3482 | [1] | BRACKET | |
| 12. | 308-9367 | [1] | HARNESS AS-SWITCH (ROTATION, INCLINATION)(INCLINATION) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-1424 E | HOSE (258-CM) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 210-8958 E | TUBE-HEAT SHRINK (24-MM DIA)(14-CM) | |||
| 13. | 308-9396 | [2] | BRACKET AS | |
| 14. | 308-9398 | [1] | BRACKET AS | |
| 15. | 308-9399 | [1] | BRACKET AS | |
| 16. | 327-0560 | [1] | BRACKET (RH) | |
| 17. | 327-0561 | [1] | BRACKET (LH) | |
| 18. | 380-3061 | [1] | HARNESS AS-CHASSIS (GRADE CONTROL) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7R-3029 | [4] | CAP-DUST | ||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(115-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 228-3323 | [4] | CLIP-SPRING | ||
| 243-5362 | [1] | CAP-DUST | ||
| 359-5179 | [1] | PLUG AS-CONNECTOR (14-PIN) | ||
| 19. | 436-3254 | [1] | BRACKET | |
| 20. | 092-5524 M | [2] | BOLT (M12X1.75X80-MM) | |
| 21. | 130-5300 | [2] | CLIP | |
| 22. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 23. | 174-9692 | [4] | SPACER (20.5X35X16-MM THK) | |
| 24. | 1J-6762 | [4] | BOLT-PLOW (3/4-10X3-IN) | |
| 25. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
| 26. | 223-3490 | [1] | CLIP | |
| 27. | 2J-3506 | [4] | NUT-FULL (3/4-10-THD) | |
| 28. | 4P-7428 | [1] | CLIP (LADDER) | |
| 29. | 4P-7429 | [2] | CLIP (LADDER) | |
| 30. | 4P-7581 | [2] | CLIP (LADDER) | |
| 32. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
| 33. | 6D-4244 | [3] | CLIP (LOOP) | |
| 34. | 6D-4246 | [2] | CLIP (LOOP) | |
| 35. | 6V-1228 | [1] | CLIP | |
| 36. | 7D-1649 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 37. | 8C-6857 | [4] | BOLT (3/4-10X2.75-IN) | |
| 38. | 8M-2773 | [5] | CLIP (LOOP) | |
| 39. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 40. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 41. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 42. | 8T-4137 M | [16] | BOLT (M10X1.5X20-MM) | |
| 43. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 44. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 45. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 46. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 47. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 48. | 8T-4994 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 49. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 50. | 9M-8406 | [2] | CLIP (LOOP) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63990471
380-3060: WIRING GP-GRADE CONTROL
380-3060 WIRING GP-GRADE CONTROL -ACCUGRADE
S/N N9E1-UP
PART OF 462-7928, 462-7929 GRADE CONTROL AR
Type 2
AN ATTACHMENT
S/N N9E1-UP
PART OF 462-7928, 462-7929 GRADE CONTROL AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 160M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-3033 | [16] | SCREW-SOCKET HEAD (4-40X0.5-IN) | |
| 2. | 7K-1181 C | [28] | STRAP-CABLE | |
| 3. | 127-9323 C | [1] | BRACKET AS | |
| 4. | 132-8487 | [4] | NUT-RING | |
| 5. | 169-5414 | [1] | CLIP | |
| 6. | 236-8826 | [4] | BOSS (1-1/8-18X0.708-IN) | |
| 7. | 251-1133 | [1] | TUBE | |
| 8. | 255-3482 | [1] | BRACKET | |
| 9. | 308-9367 | [1] | HARNESS AS-SWITCH (ROTATION, INCLINATION)(INCLINATION) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 165-0017 G | HOSE (101-IN) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(16-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 368-2369 B | TAPE | |||
| 368-2370 B | TAPE | |||
| 10. | 308-9396 | [2] | BRACKET AS | |
| 11. | 308-9398 | [1] | BRACKET AS | |
| 12. | 308-9399 | [1] | BRACKET AS | |
| 13. | 327-0560 | [1] | BRACKET (RH) | |
| 14. | 327-0561 | [1] | BRACKET (LH) | |
| 15. | 380-3061 | [1] | HARNESS AS-CHASSIS (GRADE CONTROL) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7R-3029 | [4] | CAP-DUST | ||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(115-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 228-3323 | [4] | CLIP-SPRING | ||
| 243-5362 | [1] | CAP-DUST | ||
| 359-5179 | [1] | PLUG AS-CONNECTOR (14-PIN) | ||
| 16. | 436-3254 | [1] | BRACKET | |
| 17. | 448-1893 C | [1] | BRACKET AS | |
| 18. | 448-1938 CY | [1] | HARNESS AS-SENSOR (INCLINATION) | |
| 19. | 474-5410 CY | [1] | HARNESS AS-SENSOR (ROTATION SENSOR) | |
| 20. | 111-9251 C | [4] | WASHER-HARD (20X35X1.6-MM THK) | |
| 21. | 130-5300 | [2] | CLIP | |
| 22. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 23. | 174-9692 | [4] | SPACER (20.5X35X16-MM THK) | |
| 24. | 1J-6762 | [4] | BOLT-PLOW (3/4-10X3-IN) | |
| 25. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
| 26. | 223-3490 | [1] | CLIP | |
| 27. | 2J-3506 | [4] | NUT-FULL (3/4-10-THD) | |
| 28. | 329-3356 CM | [1] | NUT (M12X1.75-THD) | |
| 29. | 344-5675 CM | [1] | NUT (M10X1.5-THD) | |
| 30. | 4P-7581 C | [4] | CLIP (LADDER) | |
| 31. | 4S-1962 C | [3] | CLIP (LOOP) | |
| 32. | 5K-3294 C | [1] | CLIP (SLOT) | |
| 33. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
| 34. | 6D-4246 | [2] | CLIP (LOOP) | |
| 35. | 6V-1228 | [1] | CLIP | |
| 36. | 7D-1649 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 37. | 8C-6857 | [4] | BOLT (3/4-10X2.75-IN) | |
| 38. | 8M-2770 C | [5] | CLIP (LOOP) | |
| 39. | 8M-2773 | [5] | CLIP (LOOP) | |
| 40. | 8T-4121 C | [21] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 42. | 8T-4136 CM | [6] | BOLT (M10X1.5X25-MM) | |
| 43. | 8T-4137 M | [16] | BOLT (M10X1.5X20-MM) | |
| 44. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 45. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 46. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 47. | 8T-4223 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 48. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 49. | 9C-5344 | [2] | SPACER (10.5X20X18-MM THK) | |
| 50. | 9G-7101 | [1] | SPACER (11X20X30-MM THK) | |
| 51. | 7X-7729 | [5] | WASHER (11X25X3-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63990472
380-3060: WIRING GP-GRADE CONTROL
380-3060 WIRING GP-GRADE CONTROL -ACCUGRADE
S/N N9E1-UP
PART OF 462-7928, 462-7929 GRADE CONTROL AR
Type 3
AN ATTACHMENT
S/N N9E1-UP
PART OF 462-7928, 462-7929 GRADE CONTROL AR
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your 160M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 107-1716 C | [16] | SCREW (4-1/2-40X0.63-IN) | |
| 2. | 7K-1181 | [28] | STRAP-CABLE | |
| 3. | 127-9323 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 132-8487 | [4] | NUT-RING | |
| 5. | 169-5414 | [1] | CLIP | |
| 6. | 236-8826 | [4] | BOSS (1-1/8-18X0.708-IN) | |
| 7. | 251-1133 | [1] | TUBE | |
| 8. | 255-3482 | [1] | BRACKET | |
| 9. | 308-9367 Y | [1] | HARNESS AS-SWITCH (ROTATION, INCLINATION) | |
| 10. | 308-9396 | [2] | BRACKET AS | |
| 11. | 511-2430 C | [1] | BRACKET AS (LH) | |
| 7T-1099 | [1] | LINK | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 12. | 511-2431 C | [1] | BRACKET AS (RH) | |
| 13. | 327-0560 | [1] | BRACKET (RH) | |
| 14. | 327-0561 | [1] | BRACKET (LH) | |
| 15. | 380-3061 Y | [1] | HARNESS AS-CHASSIS (GRADE CONTROL) | |
| 16. | 436-3254 | [1] | BRACKET | |
| 17. | 448-1893 | [1] | BRACKET AS | |
| 18. | 448-1938 Y | [1] | HARNESS AS-SENSOR (INCLINATION) | |
| 19. | 474-5410 Y | [1] | HARNESS AS-SENSOR (ROTATION SENSOR) | |
| 20. | 111-9251 | [4] | WASHER-HARD (20X35X1.6-MM THK) | |
| 21. | 130-5300 | [2] | CLIP | |
| 22. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 23. | 174-9692 | [4] | SPACER (20.5X35X16-MM THK) | |
| 24. | 1J-6762 | [4] | BOLT-PLOW (3/4-10X3-IN) | |
| 25. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
| 26. | 223-3490 | [1] | CLIP | |
| 27. | 2J-3506 | [4] | NUT-FULL (3/4-10-THD) | |
| 28. | 329-3356 M | [1] | NUT (M12X1.75-THD) | |
| 29. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 30. | 4P-7581 | [4] | CLIP (LADDER) | |
| 31. | 4S-1962 | [3] | CLIP (LOOP) | |
| 32. | 5K-3294 | [1] | CLIP (SLOT) | |
| 33. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
| 34. | 6D-4246 | [2] | CLIP (LOOP) | |
| 35. | 6V-1228 | [1] | CLIP | |
| 36. | 7D-1649 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 37. | 8C-6857 | [4] | BOLT (3/4-10X2.75-IN) | |
| 38. | 8M-2770 | [5] | CLIP (LOOP) | |
| 39. | 8M-2773 | [5] | CLIP (LOOP) | |
| 40. | 8T-4121 C | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 42. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| 43. | 8T-4137 CM | [16] | BOLT (M10X1.5X20-MM) | |
| 44. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 45. | 8T-0558 M | [4] | BOLT-SELF-LOCKING (M12X1.75X50-MM) | |
| 46. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 47. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 48. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 49. | 9C-5344 | [2] | SPACER (10.5X20X18-MM THK) | |
| 50. | 9G-7101 | [1] | SPACER (11X20X30-MM THK) | |
| 51. | 7X-7729 | [7] | WASHER (11X25X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63990473
380-3010: WIRING GP-REAR
For full view, you need register
Parts for your 160M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 7K-1181 | [72] | STRAP-CABLE | |
| 3. | 7W-5672 | [1] | PIPE | |
| 4. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 5. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 6. | 144-4613 | [1] | ANGLE AS | |
| 7. | 166-0690 | [1] | BLOCK AS-MOUNTING | |
| 8. | 204-2281 | [15] | STRAP-CABLE | |
| 9. | 243-1353 | [1] | SPACER (11X20X35-MM THK) | |
| 10. | 251-3265 | [1] | LINK AS | |
| 6F-0612 | [1] | NUT-JAM (1/4-28-THD) | ||
| 8S-7048 | [1] | ROD END | ||
| 9L-3334 | [1] | NUT-PLATED (1/4-28-THD, LH) | ||
| 036-7232 | [1] | ROD END | ||
| 11. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN) | |
| 12. | 258-8949 | [2] | SPACER (7.5X12X56-MM THK) | |
| 13. | 279-9658 | [1] | LEVER | |
| 14. | 319-5112 | [1] | PLATE AS | |
| 9R-2821 M | [2] | BOSS (M10X1.5X15-MM) | ||
| 15. | 319-5114 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 16. | 319-5123 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 17. | 319-5128 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 18. | 319-5153 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 19. | 320-3063 | [1] | SENSOR GP-PRESSURE (AIR RESTRICTION) | |
| 20. | 326-4516 | [6] | TIE-CABLE | |
| 21. | 340-8158 Y | [1] | CONTROL GP-ENGINE ELECTRONIC (AIR COOLING) | |
| 22. | 344-7391 | [2] | SENSOR-PRESSURE (EJECTOR)(BRAKE CHARGE) | |
| 23. | 347-1843 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | ||
| 24. | 353-4515 | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 25. | 359-9171 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 26. | 359-9172 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST OUTLET) | |
| 27. | 360-2059 | [1] | BRACKET | |
| 28. | 373-4328 | [1] | SENSOR GP-POSITION (ROTARY) | |
| 29. | 374-8776 | [1] | PLATE | |
| 30. | 380-3012 | [1] | HARNESS AS-REAR | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2L-8076 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 235-2765 E | CONDUIT-FLEXIBLE (27.6-MM ID)(45-CM) | |||
| 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 359-5179 | [1] | PLUG AS-CONNECTOR (14-PIN) | ||
| 8T-8737 | [31] | PLUG-SEAL | ||
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 361-2944 | [2] | PLUG AS-CONNECTOR | ||
| 274-8267 | [2] | PLUG (4-GA) | ||
| 8T-8730 | [28] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 311-4859 E | TUBE-HEAT SHRINK (48-MM DIA)(16-CM) | |||
| 240-7193 | [1] | RESISTOR AS (500-OHM, 2-WATT) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 31. | 380-3013 | [1] | HARNESS AS-SENSOR | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4013 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 32. | 380-3014 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 33. | 380-3036 | [1] | HARNESS AS-SENSOR | |
| 374-7463 | [1] | CAP-SEAL | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 177-9656 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [17] | PLUG-SEAL | ||
| 167-3692 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 7T-0094 | [4] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8730 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 310-0674 | [1] | LOCKWASHER | ||
| 34. | 380-3017 | [1] | COVER | |
| 35. | 380-3024 | [1] | HARNESS AS-AUXILIARY | |
| 9X-3401 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [16] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-3402 | [17] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [17] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM) | |||
| 310-0674 | [1] | LOCKWASHER | ||
| 366-8294 | [1] | PLUG AS (CONNECTOR) | ||
| 379-5103 | [8] | SOCKET-CONNECTOR (17-GA TO 20-GA) | ||
| 379-5112 | [11] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [16] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 272-2840 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 185-1861 | [11] | SEAL-WIRE | ||
| 380-5860 | [2] | SEAL-WIRE | ||
| 380-8868 | [8] | SEAL-WIRE | ||
| 317-1204 E | SLEEVE (27-CM) | |||
| 379-5114 | [16] | SOCKET-CONNECTOR (18-GA TO 20-GA) | ||
| 378-6626 | [2] | SOCKET-TERMINAL (17-GA TO 20-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 382-3077 | [1] | BOOT (1-PIN) | ||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 240-7874 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 240-7876 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 240-7877 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 240-7878 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 378-5571 | [1] | PLUG AS (CONNECTOR) | ||
| 379-5104 | [1] | PLUG AS | ||
| 379-5105 | [1] | PLUG AS | ||
| 36. | 380-3028 | [1] | HARNESS AS-REAR | |
| 174-0503 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2255 | [3] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS , WEDGE & INTERFACE SEAL) | ||||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 7K-1181 | [6] | STRAP-CABLE | ||
| 2L-8052 | [2] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [2] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [3] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 368-2370 B | TAPE | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(200-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 140-1809 E | TUBE-HEAT SHRINK (76.2-MM DIA)(24-CM) | |||
| 311-2812 | [1] | PLUG-CONNECTOR | ||
| 8T-8737 | [289] | PLUG-SEAL | ||
| 134-2540 | [2] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 324-6267 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 274-3781 | [1] | CAP-SEAL | ||
| 7T-0094 | [7] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8730 | [218] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [42] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [96] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 160-7689 | [2] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 167-3693 | [2] | PLUG AS-CONNECTOR (31-PIN) | ||
| 213-0141 | [1] | CONNECTOR (1-PIN) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 241-8834 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 237-0336 | [1] | COVER (CONNECTOR) | ||
| 368-2370 B | TAPE | |||
| 382-3077 | [1] | BOOT (1-PIN) | ||
| 335-8954 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 382-3077 | [1] | BOOT (1-PIN) | ||
| 274-3774 | [3] | CAP-CONNECTOR | ||
| 274-3775 | [1] | CAP-CONNECTOR | ||
| 233-9494 E | CONDUIT (47-MM OD)(45-CM) | |||
| 213-0142 | [1] | CONNECTOR | ||
| 126-1774 | [3] | COVER-CONNECTOR | ||
| 8T-8729 | [19] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 37. | 396-6500 Y | [1] | CONTROL GP-ELECTRONIC (VOLTAGE, LOAD PROTECTION, 24-VOLT) | |
| 39. | 091-0081 | [6] | SPACER (10.5X20X10-MM THK) | |
| 40. | 130-5300 | [9] | CLIP | |
| 41. | 132-5789 | [11] | CLIP (LADDER) | |
| 42. | 133-6934 | [2] | SPACER (11X20X25-MM THK) | |
| 43. | 134-3355 | [1] | STRAP AS | |
| 44. | 1F-7854 | [1] | SPACER (11.01X19.05X49.21-MM THK) | |
| 45. | 204-8000 | [15] | MOUNTING-CABLE TIE | |
| 46. | 228-7100 | [1] | SEAL-O-RING | |
| 47. | 237-9960 | [1] | CLIP (LADDER) | |
| 48. | 242-1583 M | [1] | STUD (M10X1.5X75-MM) | |
| 49. | 277-1873 | [2] | CLIP (LADDER) | |
| 50. | 294-3313 | [1] | CLIP (LADDER) | |
| 51. | 2F-7888 | [2] | SCREW-MACHINE (10-32X1.25-IN) | |
| 52. | 2K-5232 | [1] | SPACER (0.406X0.75X1.81-IN THK) | |
| 53. | 309-1905 M | [1] | STUD-TAPERLOCK (M10X1.5X100-MM) | |
| 54. | 309-4314 | [2] | CLIP (LADDER) | |
| 55. | 342-2135 | [1] | CLIP (LOOP) | |
| 56. | 352-3968 | [2] | CLIP (LADDER) | |
| 57. | 3B-4619 | [1] | PIN-COTTER | |
| 58. | 3J-1907 | [2] | SEAL-O-RING | |
| 59. | 3K-0360 | [1] | SEAL-O-RING | |
| 60. | 3S-2093 | [11] | STRAP-CABLE | |
| 61. | 421-5575 | [1] | LAMP GP-INDICATOR (24-VOLT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1386 E | SLEEVE (29-CM) | |||
| 5P-5677 H | WIRE (18-GA, BLACK)(8-DM) | |||
| 62. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 63. | 4D-7388 | [2] | CLIP (LOOP) | |
| 64. | 4D-7735 | [1] | CLIP | |
| 65. | 4P-7581 | [18] | CLIP (LADDER) | |
| 66. | 4P-8134 | [1] | CLIP (LADDER) | |
| 67. | 4S-4455 | [2] | CLIP | |
| 68. | 5P-7648 | [1] | GROMMET | |
| 69. | 5P-9297 | [2] | CLIP (LOOP) | |
| 70. | 6D-3479 | [2] | CLIP (LOOP) | |
| 71. | 6D-4244 | [3] | CLIP (LOOP) | |
| 72. | 6D-4636 | [1] | CLIP (LOOP) | |
| 73. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 74. | 6V-0894 | [1] | SEAL-O-RING | |
| 75. | 6V-1249 | [2] | GROMMET (22-MM ID) | |
| 76. | 6V-1581 | [1] | CLIP (SLOT) | |
| 77. | 6V-1582 | [1] | CLIP (TAB) | |
| 78. | 6V-1889 | [1] | CLIP (LOOP) | |
| 79. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 80. | 6V-7728 M | [2] | BOLT (M6X1X45-MM) | |
| 81. | 6V-8225 M | [1] | NUT (M6X1-THD) | |
| 82. | 6W-6672 | [4] | SPACER (10.5X20X38-MM THK) | |
| 83. | 7G-3228 | [1] | GROMMET | |
| 85. | 7X-0579 | [7] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 86. | 7X-0818 M | [4] | BOLT (M8X1.25X45-MM) | |
| 87. | 8C-3793 | [2] | BOLT (1/4-20X3.75-IN) | |
| 88. | 8T-4121 | [68] | WASHER-HARD (11X21X2.5-MM THK) | |
| 89. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 90. | 8T-4136 M | [15] | BOLT (M10X1.5X25-MM) | |
| 91. | 8T-4137 M | [28] | BOLT (M10X1.5X20-MM) | |
| 92. | 8T-4172 M | [3] | BOLT (M10X1.5X80-MM) | |
| 93. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 94. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 95. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 96. | 8T-4195 M | [7] | BOLT (M10X1.5X30-MM) | |
| 97. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 98. | 099-3649 M | [4] | BOLT (M8X1.25X40-MM) | |
| 99. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 100. | 8T-4224 | [9] | WASHER-HARD (8.8X16X2-MM THK) | |
| 101. | 8T-4908 M | [5] | BOLT (M8X1.25X25-MM) | |
| 102. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| 103. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 104. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 105. | 9G-7101 | [1] | SPACER (11X20X30-MM THK) | |
| 106. | 9X-8250 | [1] | CLIP (LOOP) | |
| 108. | 9X-2038 | [6] | WASHER (7X19X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| H | SOLD BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63990474
380-3010: WIRING GP-REAR
For full view, you need register
Parts for your 160M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 C | [12] | STRAP-CABLE | |
| 3. | 7K-1181 | [68] | STRAP-CABLE | |
| 4. | 7W-5672 | [1] | PIPE | |
| 5. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 6. | 166-0690 | [1] | BLOCK AS-MOUNTING | |
| 7. | 243-1353 | [1] | SPACER (11X20X35-MM THK) | |
| 8. | 251-3265 | [1] | LINK AS | |
| 6F-0612 | [1] | NUT-JAM (1/4-28-THD) | ||
| 8S-7048 | [1] | ROD END | ||
| 9L-3334 | [1] | NUT-PLATED (1/4-28-THD, LH) | ||
| 036-7232 | [1] | ROD END | ||
| 9. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN) | |
| 10. | 258-8949 | [2] | SPACER (7.5X12X56-MM THK) | |
| 11. | 279-9658 | [1] | LEVER | |
| 12. | 319-5112 | [1] | PLATE AS | |
| 9R-2821 M | [2] | BOSS (M10X1.5X15-MM) | ||
| 13. | 319-5114 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 14. | 319-5123 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 15. | 319-5153 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 16. | 320-3063 | [1] | SENSOR GP-PRESSURE (AIR RESTRICTION) | |
| 17. | 340-8158 Y | [1] | CONTROL GP-ENGINE ELECTRONIC (AIR COOLING) | |
| 18. | 344-7391 | [2] | SENSOR-PRESSURE (EJECTOR)(BRAKE CHARGE) | |
| 19. | 353-4515 | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 20. | 441-5127 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 21. | 441-5128 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST PIPE OUT) | |
| 22. | 360-2059 | [1] | BRACKET | |
| 23. | 373-4328 | [1] | SENSOR GP-POSITION (ROTARY) | |
| 24. | 374-8776 | [1] | PLATE | |
| 25. | 380-3013 | [1] | HARNESS AS-SENSOR | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4013 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 26. | 380-3014 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 27. | 380-3017 | [1] | COVER | |
| 28. | 380-3024 | [1] | HARNESS AS-AUXILIARY | |
| 9X-3401 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [16] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-3402 | [17] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [17] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM) | |||
| 310-0674 | [1] | LOCKWASHER | ||
| 366-8294 | [1] | PLUG AS (CONNECTOR) | ||
| 379-5103 | [8] | SOCKET-CONNECTOR (17-GA TO 20-GA) | ||
| 379-5112 | [11] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [16] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 272-2840 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 185-1861 | [11] | SEAL-WIRE | ||
| 380-5860 | [2] | SEAL-WIRE | ||
| 380-8868 | [8] | SEAL-WIRE | ||
| 317-1204 E | SLEEVE (27-CM) | |||
| 379-5114 | [16] | SOCKET-CONNECTOR (18-GA TO 20-GA) | ||
| 378-6626 | [2] | SOCKET-TERMINAL (17-GA TO 20-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 382-3077 | [1] | BOOT (1-PIN) | ||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 240-7874 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 240-7876 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 240-7877 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 240-7878 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 378-5571 | [1] | PLUG AS (CONNECTOR) | ||
| 379-5104 | [1] | PLUG AS | ||
| 379-5105 | [1] | PLUG AS | ||
| 29. | 380-3036 | [1] | HARNESS AS-SENSOR | |
| 374-7463 | [1] | CAP-SEAL | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 177-9656 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [17] | PLUG-SEAL | ||
| 167-3692 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 7T-0094 | [4] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8730 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 310-0674 | [1] | LOCKWASHER | ||
| 30. | 396-6500 Y | [1] | CONTROL GP-ELECTRONIC (VOLTAGE, LOAD PROTECTION, 24-VOLT) | |
| 31. | 472-8347 CY | [1] | HARNESS AS-REAR | |
| 32. | 091-0081 | [6] | SPACER (10.5X20X10-MM THK) | |
| 33. | 099-3649 M | [4] | BOLT (M8X1.25X40-MM) | |
| 34. | 130-5300 | [7] | CLIP | |
| 35. | 132-5789 | [11] | CLIP (LADDER) | |
| 36. | 133-6934 | [2] | SPACER (11X20X25-MM THK) | |
| 37. | 134-3355 | [1] | STRAP AS | |
| 38. | 1F-7854 | [1] | SPACER (11.01X19.05X49.21-MM THK) | |
| 39. | 204-2281 | [10] | STRAP-CABLE | |
| 40. | 204-8000 | [10] | MOUNTING-CABLE TIE | |
| 41. | 228-7100 | [1] | SEAL-O-RING | |
| 42. | 237-9960 | [1] | CLIP (LADDER) | |
| 43. | 242-1583 M | [1] | STUD (M10X1.5X75-MM) | |
| 44. | 277-1873 | [2] | CLIP (LADDER) | |
| 45. | 294-3313 | [1] | CLIP (LADDER) | |
| 46. | 2F-7888 | [2] | SCREW-MACHINE (10-32X1.25-IN) | |
| 47. | 2K-5232 | [1] | SPACER (0.406X0.75X1.81-IN THK) | |
| 48. | 309-1905 M | [1] | STUD-TAPERLOCK (M10X1.5X100-MM) | |
| 49. | 309-4314 | [2] | CLIP (LADDER) | |
| 50. | 326-4516 | [6] | TIE-CABLE | |
| 51. | 342-2135 | [1] | CLIP (LOOP) | |
| 52. | 352-3968 | [2] | CLIP (LADDER) | |
| 53. | 3B-4619 | [1] | PIN-COTTER | |
| 54. | 3J-1907 | [2] | SEAL-O-RING | |
| 55. | 3K-0360 | [1] | SEAL-O-RING | |
| 56. | 421-5575 | [1] | LAMP GP-INDICATOR (24-VOLT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1386 E | SLEEVE (29-CM) | |||
| 5P-5677 H | WIRE (18-GA, BLACK)(8-DM) | |||
| 57. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 58. | 4D-7388 | [2] | CLIP (LOOP) | |
| 59. | 4D-7735 | [1] | CLIP | |
| 60. | 4P-7581 C | [19] | CLIP (LADDER) | |
| 61. | 4S-4455 | [2] | CLIP | |
| 62. | 5P-7648 | [1] | GROMMET | |
| 63. | 6D-3479 | [2] | CLIP (LOOP) | |
| 64. | 6D-4244 | [1] | CLIP (LOOP) | |
| 65. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 66. | 6V-0894 | [1] | SEAL-O-RING | |
| 67. | 6V-1249 C | [1] | GROMMET (22-MM ID) | |
| 68. | 6V-1581 | [1] | CLIP (SLOT) | |
| 69. | 6V-1582 | [1] | CLIP (TAB) | |
| 70. | 6V-1889 | [1] | CLIP (LOOP) | |
| 71. | 6V-3341 C | [1] | GROMMET | |
| 72. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 73. | 6V-7728 M | [2] | BOLT (M6X1X45-MM) | |
| 74. | 6V-8225 M | [1] | NUT (M6X1-THD) | |
| 75. | 7G-3228 | [1] | GROMMET | |
| 76. | 7X-0579 | [7] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 77. | 7X-0818 M | [4] | BOLT (M8X1.25X45-MM) | |
| 78. | 8C-3793 | [2] | BOLT (1/4-20X3.75-IN) | |
| 79. | 8T-4121 C | [55] | WASHER-HARD (11X21X2.5-MM THK) | |
| 80. | 8T-4133 M | [5] | NUT (M10X1.5-THD) | |
| 81. | 8T-4136 M | [10] | BOLT (M10X1.5X25-MM) | |
| 82. | 8T-4137 M | [26] | BOLT (M10X1.5X20-MM) | |
| 83. | 8T-4172 M | [3] | BOLT (M10X1.5X80-MM) | |
| 84. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 85. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 86. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 87. | 8T-4195 CM | [6] | BOLT (M10X1.5X30-MM) | |
| 88. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 89. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 90. | 8T-4224 | [9] | WASHER-HARD (8.8X16X2-MM THK) | |
| 91. | 8T-4908 M | [5] | BOLT (M8X1.25X25-MM) | |
| 92. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 93. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 94. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 95. | 9X-2038 | [6] | WASHER (7X19X2-MM THK) | |
| 96. | 9X-8250 | [1] | CLIP (LOOP) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| H | SOLD BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63990475
319-5110: WIRING GP-REAR LIGHTING
319-5110 WIRING GP-REAR LIGHTING
S/N N9E1-UP
RADIATOR
PART OF 331-6793 LIGHTING AR-ROADING
AN ATTACHMENT
S/N N9E1-UP
RADIATOR
PART OF 331-6793 LIGHTING AR-ROADING
AN ATTACHMENT
For full view, you need register
Parts for your 160M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [12] | STRAP-CABLE | |
| 3. | 169-5414 | [1] | CLIP | |
| 4. | 130-5300 | [4] | CLIP | |
| 5. | 204-2281 | [4] | STRAP-CABLE | |
| 6. | 204-8000 | [4] | MOUNTING-CABLE TIE | |
| 7. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 8. | 259-8450 | [2] | LAMP GP-SIGNAL (24-VOLT)(STOP, TAIL LIGHTS) | |
| (EACH INCLUDES) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 379-3416 C | [2] | LAMP GP-SIGNAL (24-VOLT)(BACKUP) | |
| (EACH INCLUDES) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 526-0598 Y | [1] | HARNESS AS-REAR LIGHTING | |
| 11. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 12. | 132-5789 | [1] | CLIP (LADDER) | |
| 13. | 344-5673 M | [12] | NUT (M6X1-THD) | |
| 14. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 15. | 8S-0948 | [2] | CLIP (SLOT) | |
| 16. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 19. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 20. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 21. | 9X-8256 | [12] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63990476
319-5140: WIRING GP-REAR LIGHTING
319-5140 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N N9E1-UP
FOLD DOWN, RADIATOR
PART OF 309-9881, 536-9969 LIGHTING AR-ROADING, 309-9879 LIGHTING GP-ROADING
Type 1
AN ATTACHMENT
S/N N9E1-UP
FOLD DOWN, RADIATOR
PART OF 309-9881, 536-9969 LIGHTING AR-ROADING, 309-9879 LIGHTING GP-ROADING
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 160M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [22] | STRAP-CABLE | |
| 3. | 116-0118 | [1] | CLIP | |
| 4. | 204-2281 | [4] | STRAP-CABLE | |
| 5. | 204-8000 | [4] | MOUNTING-CABLE TIE | |
| 6. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 7. | 395-2113 C | [2] | LAMP GP-SIGNAL (24-VOLT, LED)(STOP, TAIL, TURN) | |
| (EACH INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 379-3416 C | [2] | LAMP GP-SIGNAL (24-VOLT)(BACKUP) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 319-5147 | [1] | HARNESS AS-LIGHTING (RH) | |
| 10. | 319-5148 | [1] | HARNESS AS-LIGHTING (LH) | |
| (EACH HARNESS AS INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(7-CM) | |||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 232-0895 E | CONDUIT-FLEXIBLE (9.6-MM ID)(138-CM) | |||
| 11. | 348-3640 | [1] | HARNESS AS-REAR LIGHTING | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 210-8958 E | TUBE-HEAT SHRINK (24-MM DIA)(10-CM) | |||
| 232-0897 E | CONDUIT-FLEXIBLE (16.2-MM ID)(34-CM) | |||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 12. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 13. | 130-5300 | [4] | CLIP | |
| 14. | 132-5789 | [1] | CLIP (LADDER) | |
| 15. | 5C-2890 M | [12] | NUT (M6X1-THD) | |
| 16. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 17. | 8M-2770 | [4] | CLIP (LOOP) | |
| 18. | 8S-0948 | [2] | CLIP (SLOT) | |
| 19. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 21. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 22. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 23. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 24. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 25. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63990477
319-5140: WIRING GP-REAR LIGHTING
319-5140 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N N9E1-UP
FOLD DOWN, RADIATOR
PART OF 309-9881, 536-9969 LIGHTING AR-ROADING, 309-9879 LIGHTING GP-ROADING
Type 2
AN ATTACHMENT
S/N N9E1-UP
FOLD DOWN, RADIATOR
PART OF 309-9881, 536-9969 LIGHTING AR-ROADING, 309-9879 LIGHTING GP-ROADING
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 160M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [22] | STRAP-CABLE | |
| 3. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 4. | 204-2281 | [4] | STRAP-CABLE | |
| 5. | 204-8000 | [4] | MOUNTING-CABLE TIE | |
| 6. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M EACH) | |||
| 7. | 319-5147 | [1] | HARNESS AS-LIGHTING (RH) | |
| 8. | 319-5148 | [1] | HARNESS AS-LIGHTING (LH) | |
| (EACH HARNESS AS INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(7-CM) | |||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 232-0895 E | CONDUIT-FLEXIBLE (9.6-MM ID)(138-CM) | |||
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 368-2370 B | TAPE | |||
| 9. | 526-0598 CY | [1] | HARNESS AS-REAR LIGHTING | |
| 10. | 379-3416 Y | [2] | LAMP GP-SIGNAL (24-VOLT)(REVERSE) | |
| 11. | 395-2113 | [2] | LAMP GP-SIGNAL (24-VOLT, LED)(STOP, TAIL, TURN) | |
| (EACH INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 13. | 130-5300 | [4] | CLIP | |
| 14. | 132-5789 | [1] | CLIP (LADDER) | |
| 15. | 8M-2770 | [4] | CLIP (LOOP) | |
| 16. | 8S-0948 | [2] | CLIP (SLOT) | |
| 17. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 19. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 20. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 21. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 22. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 169-5414 C | [1] | CLIP | |
| 24. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 25. | 344-5673 CM | [12] | NUT (M6X1-THD) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP63990478
346-8247: WIRING GP-SENSOR
346-8247 WIRING GP-SENSOR
S/N SSE1-UP; SYE1-9173
PART OF 381-6486 ENGINE AR-COMPLETE
FOR USE WITH LHS ENGINE MOUNTED WITH PRIMARY FILTER MOUNTED ABOVE THE SECONDARY
CANNOT BE USED WITH REMOTE MOUNTED PRIMARY AND SECONDARY FUEL FILTERS
S/N SSE1-UP; SYE1-9173
PART OF 381-6486 ENGINE AR-COMPLETE
FOR USE WITH LHS ENGINE MOUNTED WITH PRIMARY FILTER MOUNTED ABOVE THE SECONDARY
CANNOT BE USED WITH REMOTE MOUNTED PRIMARY AND SECONDARY FUEL FILTERS
For full view, you need register
Parts for your 160M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 290-5562 | [2] | MOUNT (DUAL SWIVEL) | |
| 3. | 367-2379 | [1] | HARNESS AS-SENSOR | |
| 3S-2093 | [3] | STRAP-CABLE | ||
| 349-6062 | [1] | HARNESS AS-SENSOR | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 346-5904 | [1] | HARNESS AS-SENSOR | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [9] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 E | TAPE-ELECTRICAL (25-CM) | |||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 238-8245 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 281-8801 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 281-8804 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 289-5150 E | SLEEVE (26-CM) | |||
| 317-1204 E | SLEEVE (60-CM) | |||
| [2] | BRACKET AS | |||
| (EACH INCLUDES) | ||||
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 4. | 132-5789 | [1] | CLIP (LADDER) | |
| 5. | 4P-7581 | [1] | CLIP (LADDER) | |
| 6. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 7. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 8. | 6V-8084 M | [1] | BOLT (M10X1.5X12-MM) | |
| 9. | 6V-8490 M | [2] | BOLT (M6X1X25-MM) | |
| 10. | 7G-1239 | [1] | SPACER (10.5X19X4.5-MM THK) | |
| 11. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 13. | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP63990479
346-8247: WIRING GP-SENSOR
346-8247 WIRING GP-SENSOR
S/N N9E155-UP; SYE1-UP
PART OF 381-6486, 486-4637, 516-9593 ENGINE AR-COMPLETE
FOR USE WITH LHS ENGINE MOUNTED WITH PRIMARY FILTER MOUNTED ABOVE THE SECONDARY
CANNOT BE USED WITH REMOTE MOUNTED PRIMARY AND SECONDARY FUEL FILTERS
S/N N9E155-UP; SYE1-UP
PART OF 381-6486, 486-4637, 516-9593 ENGINE AR-COMPLETE
FOR USE WITH LHS ENGINE MOUNTED WITH PRIMARY FILTER MOUNTED ABOVE THE SECONDARY
CANNOT BE USED WITH REMOTE MOUNTED PRIMARY AND SECONDARY FUEL FILTERS
For full view, you need register
Parts for your 160M 3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 290-5562 | [2] | MOUNT (DUAL SWIVEL) | |
| 3. | 349-6062 CY | [1] | HARNESS AS-SENSOR | |
| 4. | 132-5789 | [1] | CLIP (LADDER) | |
| 5. | 4P-7581 | [1] | CLIP (LADDER) | |
| 6. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 7. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 8. | 6V-8084 M | [1] | BOLT (M10X1.5X12-MM) | |
| 9. | 6V-8490 M | [2] | BOLT (M6X1X25-MM) | |
| 10. | 7G-1239 | [1] | SPACER (10.5X19X4.5-MM THK) | |
| 11. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 13. | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
