AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

359-0100 COUPLING GP-TORSIONAL S/N N9K1-UP PART OF 380-6760, 443-8170 INSTALLATION AR-ENGINE 160M 3 AWD


POWER TRAIN
COUPLING GP
TRANSMISSION GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL
DRIVE GP
FILLER GP-POWER TRAIN OIL
FILTER GP

MOTOR GRADER 160M 3 AWD MOTOR GRADER N9K
 160M Series 3 Motor Grader-All Wheel Drive N9K00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP6400 160M 3 AWD N9K   (2013)

POWER TRAIN

COUPLING GP
COUPLING GP-TORSIONAL
359-0100 COUPLING GP-TORSIONAL
 

#SEBP64000520
 

359-0100: COUPLING GP-TORSIONAL

359-0100 COUPLING GP-TORSIONAL
S/N N9K1-UP
PART OF 380-6760, 443-8170 INSTALLATION AR-ENGINE
i04080810 SEBP6400
3590100 COUPLING GP-TORSIONAL Parts scheme
  For full view, you need register

Parts for your 160M 3 AWD MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 442-8771 [1] COUPLING AS-DRIVE  
2. 165-3928 [12] BOLT (3/8-16-THD)  
3. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP64000521
 

331-5222: COVER GP-SHIPPING

331-5222 COVER GP-SHIPPING -TRANSMISSION
S/N CM31-UP
PART OF 381-0660 TRANSMISSION AR
i04017665 SEBP6400
3315222 COVER GP-SHIPPING Parts scheme
  For full view, you need register

Parts for your 160M 3 AWD MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
2. 7J-3554 [1] COVER  
4. 9H-0846 [1] SEAL-O-RING  
5. 117-2927 [1] COVER-SHIPPING  
6. 126-1773 [1] CAP-CONNECTOR  
9. 179-1539 [1] GASKET  
11. 148-8406 [2] PLUG AS  
    (EACH INCLUDES)
  9S-9334 [1] PLUG  
  7M-8485 [1] SEAL-O-RING  
12. 148-8407 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
13. [1] PLUG AS  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
16. 179-1538 [1] COVER  
17. 2D-0094 [1] GASKET  
18. 5P-8245 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 6V-3823 M [10] BOLT (M12X1.75X60-MM)  
20. 6V-8149 M [10] NUT (M12X1.75-THD)  
21. 6V-9833 [1] CAP  
22. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
23. 8E-5287 [1] STRAP  
24. 9M-2904 [1] CLAMP-HOSE  
  M   METRIC PART
 

#SEBP64000522
 

365-2124: DIFFERENTIAL & BEVEL GEAR GP

365-2124 DIFFERENTIAL & BEVEL GEAR GP
S/N N9K1-UP
PART OF 447-9888 AXLE GP-REAR
i04081530 SEBP6400
3652124 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 160M 3 AWD MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-1677 [1] RACE-BEARING INNER  
2. 1J-2860 [1] CUP-BEARING  
3. 2D-9455 [1] CONE-BEARING  
4. 7S-4001 [1] SEAL-O-RING  
5. 201-7713 [1] BEARING AS  
6. 201-8481 [1] LOCKNUT AS  
  314-3260 [4] BOLT-LOCKING (M8X1.25X18-MM)  
7. 222-7843 [1] SHROUD  
8. 264-0575 [1] SEAL-LIP TYPE  
9. 272-7121 [1] YOKE AS  
  271-8680 [1] GUARD  
10. 271-8528 B [1] SHIM PACK (INCLUDES 18-SHIMS)  
11. 271-8529 [1] RETAINER  
12. 272-7116 [1] HOUSING-PINION  
13. 287-8223 Y [1] DIFFERENTIAL GP  
14. 293-0213 [1] SHAFT-BEVEL PINION  
15. 290-7296 M [20] BOLT (M16X2X40-MM)  
16. 309-8763 [1] GEAR-BEVEL (44-TEETH)  
17. 5A-3604 M [3] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
18. 1J-4757 [1] CONE-BEARING  
19. 2D-9454 [1] CUP-BEARING  
20. 8C-0622 [1] RING-RETAINING  
21. 286-9155 M [1] BOLT-SELF-LOCKING (M16X2X120-MM)  
22. 9X-8268 [20] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP64000523
 

287-8223: DIFFERENTIAL GP

287-8223 DIFFERENTIAL GP
S/N N9K1-UP
PART OF 365-2124 DIFFERENTIAL & BEVEL GEAR GP
i02781065 SEBP6400
2878223 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 160M 3 AWD MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-9144 [3] SEAL-O-RING  
2. 148-7841 [3] SPRING  
3. 201-8476 [9] PLATE-SEPARATOR  
4. 201-8477 [9] DISC-FRICTION  
5. 201-8480 [1] PLATE-THRUST  
6. 221-8040 [3] DOWEL  
7. 239-3105 [1] RING-THRUST  
8. 287-8222 [1] CASE AS-DIFFERENTIAL  
8A. 8T-5002 M [8] BOLT (M16X2X180-MM)  
8B. 2S-0736 [8] WASHER-HARD (17X27X3.5-MM THK)  
9. 293-5368 [4] BUSHING  
10. 305-3353 [2] WASHER-THRUST  
11. 305-3352 [4] WASHER-THRUST  
12. 306-5622 [1] SPIDER  
13. 306-5628 [1] GEAR-DIFFERENTIAL BEVEL (44-TEETH)  
14. 306-5629 [1] GEAR-DIFFERENTIAL BEVEL (16-TEETH)  
15. 306-5635 [4] PINION-DIFFERENTIAL  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  M   METRIC PART
 

#SEBP64000524
 

440-3355: DRIVE GP-FINAL

440-3355 DRIVE GP-FINAL
S/N N9K1-UP
PART OF 447-9888 AXLE GP-REAR
i05472082 SEBP6400
4403355 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 160M 3 AWD MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8439 B [5] SHIM (0.007-IN THK)  
2. 7D-8441 B [5] SHIM (0.005-IN THK)  
3. 9D-3075 [1] RETAINER  
4. 9D-7047 B [2] SHIM (0.02-MM THK)  
5. 512-2438 [2] SPROCKET  
6. 255-8575 [1] SHAFT-DRIVE  
7. 264-0194 [1] RETAINER  
8. 264-0196 B [1] SHIM PACK (INCLUDES 10-SHIMS)  
9. 266-0199 [2] RING-WEAR  
10. 272-8009 Y [1] CARRIER GP-FINAL DRIVE  
11. 279-2568 [1] GEAR-RING (84-TEETH)  
12. 328-9669 [1] WASHER-THRUST (261.8X303X7-MM THK)  
13. 330-3494 [1] HOUSING  
14. 440-3357 [1] HOUSING  
15. 440-3358 [1] WASHER-THRUST (261.77X319.07X6.97-MM THK)  
16. 442-5378 [1] SEAL-LIP TYPE  
17. 103-6169 M [3] BOLT-SELF-LOCKING (M16X2X60-MM)  
18. 144-8299 [1] SEAL-O-RING  
19. 198-4768 [16] WASHER-HARD (17.5X32X8-MM THK)  
20. 202-6473 M [18] BOLT (M16X2X60-MM)  
21. 267-8628 M [16] BOLT-LOCKING (M16X2X60-MM)  
22. 290-7515 M [12] BOLT (M16X2X70-MM)  
23. 2B-9174 [1] BEARING AS-TAPERED ROLLER  
24. 4B-8394 [2] CUP-BEARING  
25. 4D-3704 [18] WASHER-HARD (17X30X5-MM THK)  
26. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 5P-9147 [1] SEAL-O-RING  
28. 5T-8224 [12] SPACER (17X32X12.7-MM THK)  
29. 6V-2449 [1] CONE-BEARING  
30. 8D-3902 [1] SEAL-LIP TYPE  
31. 8T-0372 M [3] BOLT (M12X1.75X90-MM)  
32. 8T-3727 [1] RING-RETAINING  
33. 9F-2247 [1] PLUG-PIPE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP64000525
 

440-3356: DRIVE GP-FINAL

440-3356 DRIVE GP-FINAL
S/N N9K1-UP
PART OF 447-9888 AXLE GP-REAR
i05472077 SEBP6400
4403356 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 160M 3 AWD MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8439 B [5] SHIM (0.007-IN THK)  
2. 7D-8441 B [5] SHIM (0.005-IN THK)  
3. 9D-3075 [1] RETAINER  
4. 9D-7047 B [2] SHIM (0.02-MM THK)  
5. 512-2438 [2] SPROCKET  
6. 255-8575 [1] SHAFT-DRIVE  
7. 264-0194 [1] RETAINER  
8. 264-0196 B [1] SHIM PACK (INCLUDES 10-SHIMS)  
9. 266-0199 [2] RING-WEAR  
10. 272-8009 Y [1] CARRIER GP-FINAL DRIVE  
11. 279-2568 [1] GEAR-RING (84-TEETH)  
12. 328-9669 [1] WASHER-THRUST (261.8X303X7-MM THK)  
13. 330-3493 [1] HOUSING  
14. 440-3357 [1] HOUSING  
15. 440-3358 [1] WASHER-THRUST (261.77X319.07X6.97-MM THK)  
16. 442-5378 [1] SEAL-LIP TYPE  
17. 103-6169 M [3] BOLT-SELF-LOCKING (M16X2X60-MM)  
18. 144-8299 [1] SEAL-O-RING  
19. 198-4768 [16] WASHER-HARD (17.5X32X8-MM THK)  
20. 202-6473 M [18] BOLT (M16X2X60-MM)  
21. 267-8628 M [16] BOLT-LOCKING (M16X2X60-MM)  
22. 290-7515 M [12] BOLT (M16X2X70-MM)  
23. 2B-9174 [1] BEARING AS-TAPERED ROLLER  
24. 4B-8394 [2] CUP-BEARING  
25. 4D-3704 [18] WASHER-HARD (17X30X5-MM THK)  
26. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 5P-9147 [1] SEAL-O-RING  
28. 5T-8224 [12] SPACER (17X32X12.7-MM THK)  
29. 6V-2449 [1] CONE-BEARING  
30. 8D-3902 [1] SEAL-LIP TYPE  
31. 8T-0372 M [3] BOLT (M12X1.75X90-MM)  
32. 8T-3727 [1] RING-RETAINING  
33. 9F-2247 [1] PLUG-PIPE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP64000526
 

260-4803: DRIVE GP-WHEEL

260-4803 DRIVE GP-WHEEL -FRONT, ALL WHEEL DRIVE
S/N N9K1-UP
PART OF 390-1262 AXLE GP-FRONT
i05270808 SEBP6400
2604803 DRIVE GP-WHEEL Parts scheme
  For full view, you need register

Parts for your 160M 3 AWD MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 396-8290 CY [1] GEAR GP-FRONT (LH)  
2. 396-8282 CY [1] GEAR GP-FRONT (ALL WHEEL DRIVE, RH)  
3. 260-8722 [2] COVER  
4. 7X-0622 [6] WASHER (13X24X2.5-MM THK)  
5. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP64000527
 

349-6137: FILLER GP-POWER TRAIN OIL

349-6137 FILLER GP-POWER TRAIN OIL
S/N N9K1-UP
PART OF 383-9742 POWER TRAIN AR
i03934091 SEBP6400
3496137 FILLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 160M 3 AWD MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 397-1180 [1] TUBE AS  
2. 8B-1615 [1] GASKET  
 

#SEBP64000528
 

349-6138: FILLER GP-POWER TRAIN OIL

349-6138 FILLER GP-POWER TRAIN OIL -HYDROSTATIC
S/N N9K1-UP
PART OF 371-6315 POWER TRAIN AR
i03934051 SEBP6400
3496138 FILLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 160M 3 AWD MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-5127 [1] BREATHER (ATMOSPHERIC)(POWER TRAIN OIL FILLER)  
2. 254-3286 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (POWER TRAIN OIL)  
3. 397-1181 [1] TUBE AS  
4. 3N-2945 [1] GASKET  
5. 7J-8611 [1] ELBOW-PIPE  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
 

#SEBP64000529
 

381-0657: FILTER & MTG GP-TRANSMISSION

381-0657 FILTER & MTG GP-TRANSMISSION
S/N CM31-4253
PART OF 381-0660 TRANSMISSION AR
i05377773 SEBP6400
3810657 FILTER & MTG GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 160M 3 AWD MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 289-2047 [1] PLATE AS  
2. 368-4921 Y [1] FILTER GP-OIL (TRANSMISSION)  
3. 130-5300 [1] CLIP  
4. 4P-7581 [1] CLIP (LADDER)  
5. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
7. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
8. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-5035 M [1] BOLT (M10X1.5X65-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 160M 3 AWD :

COOLER GP-TRANSMISSION OIL
350-5472 COOLER GP-TRANSMISSION OIL
CONTROL GP-TRANSMISSION HYD
381-0654 CONTROL GP-TRANSMISSION HYD
CONTROL GP-DIFFERENTIAL LOCK
356-2977 CONTROL GP-DIFFERENTIAL LOCK
CLUTCH GP-TRANSMISSION
364-8475 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
247-8303 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
235-2413 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
235-2412 CLUTCH GP-TRANSMISSION
CHAIN GP-DRIVE
233-6369 CHAIN GP-DRIVE
COVER GP-SHIPPING
331-5222 COVER GP-SHIPPING
DIFFERENTIAL & BEVEL GEAR GP
365-2124 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP
287-8223 DIFFERENTIAL GP
DRIVE GP-FINAL
440-3355 DRIVE GP-FINAL
DRIVE GP-FINAL
440-3356 DRIVE GP-FINAL
DRIVE GP-WHEEL
260-4803 DRIVE GP-WHEEL
FILLER GP-POWER TRAIN OIL
349-6137 FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
349-6138 FILLER GP-POWER TRAIN OIL

Truck sale:

Caterpillar 160M3AWD, Construction
347,900 
Caterpillar 160M3AWD, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Caterpillar 160M3AWD, Construction
347,900 
Caterpillar 160M3AWD, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Caterpillar 160M3AWD, Construction
347,900 
Caterpillar 160M3AWD, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Caterpillar 160M3AWD, Construction
347,900 
Caterpillar 160M3AWD, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Caterpillar 160M3AWD, Construction
347,900 
Caterpillar 160M3AWD, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.