AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GPFUEL SYSTEM
TANK GP-FUELLINES GP-FUEL
FILTER GP-FUEL
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP#SEBP64080150
233-7494: TURBOCHARGER GP
Parts for your AD30 UNDERGROUND ART TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-2297 | [1] | CLAMP AS (COMPRESSOR) | |
| 2. | 9N-2038 | [1] | CLAMP AS-TURBINE | |
| 3. | 161-6963 | [2] | CLAMP | |
| 4. | 240-7359 | [1] | CARTRIDGE GP-TURBOCHARGER | |
| 4P-3818 M | [3] | BOLT (M4X0.7X10-MM) | ||
| 206-8868 | [1] | SEAL-RING | ||
| 211-2259 | [2] | RING-PISTON | ||
| 211-2260 | [1] | COLLAR-THRUST | ||
| 211-2261 | [1] | BEARING-THRUST | ||
| 211-2264 | [1] | RING-PISTON | ||
| 156-6964 M | [4] | BOLT (M8X1.25X30-MM) | ||
| 239-5894 | [2] | BEARING-JOURNAL | ||
| 461-3728 | [3] | RING-RETAINING | ||
| 461-3792 | [3] | WASHER (WEAR) | ||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP64080151
382-7900: TURBOCHARGER GP
Parts for your AD30 UNDERGROUND ART TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-4536 | [1] | ELBOW | |
| 2. | 115-7087 M | [1] | BOLT (M6X0.04X10.4-MM) | |
| 3. | 161-6958 | [1] | CLIP-HOSE | |
| 4. | 161-6963 | [2] | CLAMP | |
| 5. | 267-8584 Y | [1] | CARTRIDGE GP-TURBOCHARGER | |
| 6. | 7W-2297 | [1] | CLAMP AS (COMPRESSOR) | |
| 7. | 9N-2038 | [1] | CLAMP AS-TURBINE | |
| 8. | 242-3360 E | HOSE (48-CM) | ||
| 9. | 258-4524 E | SLEEVE (36-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP64080152
396-3329: TURBOCHARGER GP
396-3329 TURBOCHARGER GP
S/N TXG1-UP
FRONT EXHAUST
PART OF 248-0847, 377-5438, 446-0291, 467-1136, 467-1138, 467-1139 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N TXG1-UP
FRONT EXHAUST
PART OF 248-0847, 377-5438, 446-0291, 467-1136, 467-1138, 467-1139 ENGINE AR-COMPLETE
AN ATTACHMENT
Parts for your AD30 UNDERGROUND ART TRUCK:
CATERPILLAR SIS#SEBP64080153
321-4736: ADAPTER GP-FAST FILL FUEL
Parts for your AD30 UNDERGROUND ART TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 349-7059 J | [1] | CAP AS-FUEL (LOCKABLE, VENTED) | |
| 7D-7111 | [1] | SEAL-O-RING | ||
| 2. | 1P-9390 | [1] | GASKET-OUTLET | |
| 3. | 214-2086 | [1] | COVER | |
| 4. | 309-2371 | [1] | GASKET | |
| 5. | 321-4685 | [1] | PLATE-FUEL TANK | |
| 6. | 6V-8084 M | [3] | BOLT (M10X1.5X12-MM) | |
| 7. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4136 M | [16] | BOLT (M10X1.5X25-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 350-7735 J | [1] | KIT-CAP FILTER (FUEL TANK) | ||
| (INCLUDES BODY-BREATHER, GASKET-BREATHER, SCREWS & WASHERS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP64080154
321-4737: ADAPTER GP-FAST FILL FUEL
Parts for your AD30 UNDERGROUND ART TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-9390 | [1] | GASKET-OUTLET | |
| 2. | 4D-0487 | [1] | VALVE AS-CHECK (FUEL FILL) | |
| 3. | 9M-2904 | [1] | CLAMP-HOSE | |
| 4. | 9Y-3349 | [1] | HOSE-DISPOSAL | |
| 5. | 101-8909 | [1] | CAP AS-FILLER (FAST FILL FUEL) | |
| 9X-8600 | [1] | SEAL-O-RING | ||
| 6. | 284-1014 | [1] | VENT AS | |
| 7. | 309-2106 | [1] | COVER AS | |
| 8. | 376-0929 | [1] | ADAPTER-FAST FILL FUEL | |
| 9. | 004-6683 | [1] | FITTING | |
| 10. | 104-5602 | [1] | CAP AS | |
| 11. | 1J-9671 | [2] | SEAL-O-RING | |
| 12. | 284-1016 | [1] | VALVE (FAST FILL) | |
| 13. | 309-2370 | [1] | ADAPTER | |
| 14. | 309-2371 | [1] | GASKET | |
| 15. | 321-4676 | [1] | COVER AS | |
| 6G-7724 | [1] | FLANGE | ||
| 16. | 321-4679 | [1] | COVER | |
| 17. | 321-4686 | [1] | BREATHER (FAST FILL FUEL) | |
| 18. | 321-4890 I | [1] | HOSE AS | |
| 19. | 6V-2612 | [2] | ELBOW | |
| 20. | 8T-4121 | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4136 M | [16] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP64080155
321-4737: ADAPTER GP-FAST FILL FUEL
Parts for your AD30 UNDERGROUND ART TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-9390 | [1] | GASKET-OUTLET | |
| 2. | 4D-0487 | [1] | VALVE AS-CHECK (FUEL FILL) | |
| 3. | 9M-2904 | [1] | CLAMP-HOSE | |
| 4. | 9Y-3349 | [1] | HOSE-DISPOSAL | |
| 5. | 101-8909 | [1] | CAP AS-FILLER (FAST FILL FUEL) | |
| 9X-8600 | [1] | SEAL-O-RING | ||
| 6. | 284-1014 | [1] | VENT AS | |
| 7. | 309-2106 | [1] | COVER AS | |
| 8. | 376-0929 | [1] | ADAPTER-FAST FILL FUEL | |
| 9. | 004-6683 | [1] | FITTING | |
| 10. | C | [1] | COVER-DUST | |
| 11. | 1J-9671 | [2] | SEAL-O-RING | |
| 12. | 284-1016 | [1] | VALVE (FAST FILL) | |
| 13. | 309-2370 | [1] | ADAPTER | |
| 14. | 309-2371 | [1] | GASKET (FAST FILL FUEL) | |
| 15. | 321-4676 | [1] | COVER AS | |
| 6G-7724 | [1] | FLANGE | ||
| 16. | 321-4679 | [1] | COVER | |
| 17. | 321-4686 | [1] | BREATHER (FAST FILL FUEL) | |
| 18. | 321-4890 I | [1] | HOSE AS | |
| 19. | 6V-2612 | [2] | ELBOW | |
| 20. | 8T-4121 | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4136 M | [16] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP64080156
265-9004: FASTENER GP-FUEL LINES
265-9004 FASTENER GP-FUEL LINES
S/N TXG1-UP
PART OF 248-0847, 377-5438, 446-0291 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N TXG1-UP
PART OF 248-0847, 377-5438, 446-0291 ENGINE AR-COMPLETE
AN ATTACHMENT
Parts for your AD30 UNDERGROUND ART TRUCK:
CATERPILLAR SIS#SEBP64080157
385-9759: FILTER & MTG GP-FUEL
385-9759 FILTER & MTG GP-FUEL
S/N GXR1-UP
PART OF 423-2097 INSTALLATION AR-ENGINE
S/N GXR1-UP
PART OF 423-2097 INSTALLATION AR-ENGINE
Parts for your AD30 UNDERGROUND ART TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 380-0084 Y | [1] | FILTER GP-WATER SEP & FUEL | |
| 2. | 386-0065 Y | [1] | FILTER GP-FUEL | |
| 3. | 1K-4649 | [2] | SPACER (0.516X1X1-IN THK) | |
| 4. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 6. | 9S-8006 | [2] | PLUG (7/8-14-THD) | |
| 7. | 8T-5005 M | [2] | BOLT (M10X1.5X70-MM) | |
| 8. | 3K-0360 | [6] | SEAL-O-RING | |
| 9. | 030-8188 | [1] | CONNECTOR | |
| 10. | 2M-9780 | [4] | SEAL-O-RING | |
| 11. | 232-1374 | [1] | BRACKET | |
| 12. | 005-4362 | [1] | ELBOW | |
| 13. | 5P-4318 | [2] | ELBOW | |
| 14. | 423-1981 G | HOSE (17.8-IN) | ||
| 15. | 305-3684 | [1] | PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF) | |
| 16. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING) | |
| 17. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 19. | 7X-0282 | [2] | BOLT (5/16-18X6.5-IN) | |
| 21. | 3E-4352 | [3] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 22. | 5P-2955 | [1] | BOLT (5/16-18X2.5-IN) | |
| 23. | 232-1376 | [2] | SPACER (8.5X12.7X139.1-MM THK) | |
| 24. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 26. | 307-4640 Y | [1] | SWITCH GP-PRESSURE (DIFFERENTIAL) | |
| 27. | 9S-4185 | [4] | PLUG (3/4-16-THD) | |
| 28. | 7K-1181 | [1] | STRAP-CABLE | |
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP64080158
471-7640: FILTER & MTG GP-FUEL
471-7640 FILTER & MTG GP-FUEL
S/N GXR1-UP
PART OF 471-7631 INSTALLATION AR-ENGINE
S/N GXR1-UP
PART OF 471-7631 INSTALLATION AR-ENGINE
Parts for your AD30 UNDERGROUND ART TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 126-8306 | [1] | TEE-O-RING | |
| 3. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING) | |
| 4. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 5. | 232-1374 | [1] | BRACKET | |
| 6. | 232-1376 | [2] | SPACER (8.5X12.7X139.1-MM THK) | |
| 7. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
| 8. | 235-3596 | [1] | ADAPTER AS | |
| 214-7566 | [1] | SEAL-O-RING | ||
| 235-3595 | [1] | ADAPTER | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 9. | 274-6719 | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 10. | 305-3684 | [1] | PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF) | |
| 11. | 307-4640 Y | [1] | SWITCH GP-PRESSURE (DIFFERENTIAL) | |
| 12. | 380-0084 Y | [1] | FILTER GP-WATER SEP & FUEL | |
| 13. | 386-0065 Y | [1] | FILTER GP-FUEL | |
| 14. | 1K-4649 | [2] | SPACER (0.516X1X1-IN THK) | |
| 15. | 228-7090 | [4] | SEAL-O-RING | |
| 16. | 2M-9780 | [4] | SEAL-O-RING | |
| 17. | 3E-4352 | [3] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 18. | 3J-1907 | [1] | SEAL-O-RING | |
| 19. | 3K-0360 | [4] | SEAL-O-RING | |
| 20. | 5P-2955 | [1] | BOLT (5/16-18X2.5-IN) | |
| 21. | 6V-0852 | [1] | CAP-DUST | |
| 22. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 23. | 6V-8624 | [2] | ELBOW | |
| 24. | 6V-8625 | [1] | ELBOW | |
| 25. | 7X-0282 | [2] | BOLT (5/16-18X6.5-IN) | |
| 26. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 28. | 8T-5005 M | [2] | BOLT (M10X1.5X70-MM) | |
| 29. | 9S-4185 | [2] | PLUG (3/4-16-THD) | |
| 30. | 9S-8006 | [2] | PLUG (7/8-14-THD) | |
| 31. | 423-1981 G | HOSE (17.7-IN) | ||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP64080159
386-0065: FILTER GP-FUEL
Parts for your AD30 UNDERGROUND ART TRUCK:
CATERPILLAR SISInformation:
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Special Instruction
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Testing and Adjusting
Disassembly and Assembly
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}



