208-3942 TOOL GP -TIRE INSTALLATION FRAME S/N GXR1-UP PART OF 267-4913 TOOL GP AN ATTACHMENT AD30 UNDERGROUND ART TRUCK

SERVICE EQUIPMENT AND SUPPLIES

TOOLS

0. 208-3942 TOOL GP
1. 213-3370 TOOL GP
2. 230-6387 TOOL GP
3. 236-8249 TOOL GP
4. 236-8279 TOOL GP
5. 236-8949 TOOL GP
6. 249-9436 TOOL GP
7. 267-4913 TOOL GP
8. 277-8101 TOOL GP
9. 186-9064 TOOL GP-DI
0. INFORMATION

UNDERGROUND ART TRUCK AD30 UNDERGROUND ART TRUCK GXR
AD30 Underground Articulated Truck GXR00001-UP (MACHINE) POWERED BY C15 Engine SEBP6408 AD30 GXR (2014)

SERVICE EQUIPMENT AND SUPPLIES

TOOLS

#SEBP64080780

208-3942: TOOL GP

TOOL GP

208-3942 TOOL GP -TIRE INSTALLATION FRAME
S/N GXR1-UP
PART OF 267-4913 TOOL GP
AN ATTACHMENT

i05880436 SEBP6408

For full view, you need register

Parts for your AD30 UNDERGROUND ART TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	212-7308	[1]	FRAME AS (UPPER)
2.	212-7309	[1]	FRAME AS (LOWER)
3.	212-7310	[2]	ROLLER AS
4.	212-7311	[4]	BLOCK
5.	7X-0347	[8]	BOLT (5/8-11X2.25-IN)
6.	8T-4122	[16]	WASHER-HARD (17X32X3.5-MM THK)
7.	211-6120	[1]	PIN AS
8.	211-6121	[1]	PIN AS
9.	235-9828 D		CHAIN (0.4-M)
9A.	235-9828 D		CHAIN (0.3-M)
10.	7X-0448	[8]	NUT (5/8-11-THD)
11.	2H-3725	[2]	BOLT (3/4-16X1.5-IN)
12.	3B-8489	[4]	FITTING-GREASE (1/8-27 PTF)
13.	212-7312	[1]	RATCHET
14.	8T-9101	[1]	BOLT (3/8-16X2.75-IN)
15.	2K-4973	[1]	LOCKNUT (3/8-16-THD)
16.	7T-1099	[1]	LINK
	D		ORDER BY THE METER

#SEBP64080781

213-3370: TOOL GP

TOOL GP

213-3370 TOOL GP -UPDRIVE GEAR ADJUST
S/N GXR1-UP
PART OF 267-4913 TOOL GP
AN ATTACHMENT

i05325603 SEBP6408

For full view, you need register

Parts for your AD30 UNDERGROUND ART TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.		[1]	HINGE AS
2.		[1]	CHAIN AS
3.		[1]	HANDLE AS
4.	6V-8185	[1]	NUT (1/4-20-THD)
5.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
6.	8T-9367	[1]	BOLT (1/4-20X2-IN)

#SEBP64080782

230-6387: TOOL GP

TOOL GP

230-6387 TOOL GP -BODY PIVOT PIN
S/N GXR1-UP
PART OF 267-4913 TOOL GP
AN ATTACHMENT

i05880443 SEBP6408

For full view, you need register

Parts for your AD30 UNDERGROUND ART TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-5265	[4]	BOLT-FORCING (7/8-14X2-IN)
2.	8T-8919	[3]	BOLT (1/2-13X1.75-IN)
3.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)

#SEBP64080783

236-8249: TOOL GP

TOOL GP

236-8249 TOOL GP -COLLET JACKING BOLT
S/N GXR1-UP
PART OF 267-4913 TOOL GP
AN ATTACHMENT

i05880450 SEBP6408

For full view, you need register

Parts for your AD30 UNDERGROUND ART TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	199-5815	[3]	BOLT-FORCING (3/8-24X3-IN)
2.	259-7962 M	[4]	BOLT-SPECIAL (M20X2.5X180-MM)
	M		METRIC PART

#SEBP64080784

236-8279: TOOL GP

TOOL GP

236-8279 TOOL GP -FRAME STAND
S/N GXR1-UP
PART OF 267-4913 TOOL GP
AN ATTACHMENT

i05881150 SEBP6408

For full view, you need register

Parts for your AD30 UNDERGROUND ART TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	304-6011	[2]	STAND AS-SUPPORT (FRONT)
2.	304-6014	[4]	STAND AS-SUPPORT (FRAME STAND, FRONT)
3.	236-8278	[1]	STAND AS-SUPPORT (REAR)
			(EACH STAND AS INCLUDES)
	4B-4158	[4]	SCREW-DRIVE (NO 4X0.25-IN)
	282-4372	[1]	FILM-IDENTIFICATION (JACK LEVEL)

#SEBP64080785

236-8949: TOOL GP

TOOL GP

236-8949 TOOL GP -OSCILLATION BEARING INSTALLER
S/N GXR1-UP
PART OF 267-4913 TOOL GP
AN ATTACHMENT

i05881172 SEBP6408

For full view, you need register

Parts for your AD30 UNDERGROUND ART TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.		[2]	PLATE
2.		[1]	SHAFT
3.	M	[1]	SPACER (35X101.6X90-MM THK)
4.	4K-0684	[3]	WASHER-HARD (34X55X6-MM THK)
5.	7H-7539	[3]	NUT-FULL (1-1/4-12-THD)
	M		METRIC PART

#SEBP64080786

249-9436: TOOL GP

TOOL GP

249-9436 TOOL GP -BRAKE WEAR
S/N GXR1-UP
PART OF 267-4913 TOOL GP
AN ATTACHMENT

i05881167 SEBP6408

For full view, you need register

Parts for your AD30 UNDERGROUND ART TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	301-3462	[1]	SPRING
2.		[1]	ROD
3.		[1]	HOUSING
4.	4H-1641	[1]	PIN-SPRING

#SEBP64080787

267-4913: TOOL GP

TOOL GP

267-4913 TOOL GP
S/N GXR1-UP
AN ATTACHMENT

i05877617 SEBP6408

For full view, you need register

Parts for your AD30 UNDERGROUND ART TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	237-0476	[1]	STAND AS (TRANSMISSION)
		[2]	TUBE-STEEL
		[2]	ANGLE
		[1]	ANGLE
		[2]	PLATE
		[2]	ANGLE
2.	186-9064 Y	[1]	TOOL GP-DIAGNOSTIC
3.	213-3370 Y	[1]	TOOL GP (UPDRIVE GEAR ADJUST)

	275-2660 F	[1]	TOOL GP (COLLET JACKING BOLT)
	5P-5265	[3]	BOLT-FORCING (7/8-14X2-IN)
	259-9328 F	[1]	TOOL GP (WINDOW TEMPLATE)
	213-1456	[5]	FILM-WARNING (WINDOW TEMPLATE)
	208-3942 FY	[1]	TOOL GP (TIRE INSTALLATION FRAME)
	212-6102 FY	[1]	PUMP GP-ELECTRIC DRIVE (BRAKE RELEASE)
	190-5213 FY	[1]	TOOL GP (AXLE LIFTING)
	190-5227 FY	[1]	TOOL GP (SEAT LIFTING)
	F	[1]	TOOL GP (AXLE STAND)
	7X-2585 M	[2]	BOLT (M30X3.5X160-MM)
	FY	[1]	TOOL GP (FRAME STAND)
	F	[1]	TOOL GP (CAB STAND)
	160-6513 M	[4]	BOLT (M36X4X80-MM)
	236-8901 FY	[1]	BRACE GP-JACK HOIST
	249-9436 FY	[1]	TOOL GP (BRAKE WEAR)
	FY	[1]	TOOL GP (OSCILLATION BEARING INSTALLER)
	236-8249 FY	[1]	TOOL GP (COLLET JACKING BOLT)
	FY	[1]	BRACE GP-JACK HOIST
	188-3129 FY	[1]	JACK GP-HYDRAULIC
	FY	[1]	LIFTING GP-BODY
	188-3141 FY	[1]	TOOL GP (JACK STAND)
	230-6387 FY	[1]	TOOL GP (BODY PIVOT PIN)
	188-3128 FY	[1]	TOOL GP (JACK HOIST TROLLEY)
	277-8101 FY	[1]	TOOL GP (EJECTOR BODY LIFTING)
	FY	[1]	LIFTING GP-BODY
	245-3084 F	[1]	TOOL-DIAGNOSTIC
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP64080788

277-8101: TOOL GP

TOOL GP

277-8101 TOOL GP -EJECTOR BODY LIFTING
S/N GXR1-UP
PART OF 267-4913 TOOL GP
AN ATTACHMENT

i05881169 SEBP6408

For full view, you need register

Parts for your AD30 UNDERGROUND ART TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	221-0350	[2]	RING AS
2.	221-0351	[2]	WASHER (38.9X106.9X12.7-MM THK)
3.	1K-9414	[2]	BOLT (1.5X2.75X5-IN)
4.	9S-8216	[2]	NUT-FULL (1-1/2-6-THD)

#SEBP64080789

186-9064: TOOL GP-DIAGNOSTIC

TOOL GP-DIAGNOSTIC

186-9064 TOOL GP-DIAGNOSTIC
S/N GXR1-UP
PART OF 267-4913 TOOL GP
AN ATTACHMENT

i04921269 SEBP6408

For full view, you need register

Parts for your AD30 UNDERGROUND ART TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

Information:

SERVICE EQUIPMENT AND SUPPLIES

TOOLS

Engine News

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}

Operation and Maintenance Manual

Hoses and Clamps - Inspect/Replace
AD30 Underground Articulated Truck

Special Instruction

Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}

Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}

Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}

Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}

Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}

Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}

Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}

Tool Operating Manual

358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}

370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}

Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}

456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}

Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}

464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}

Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}

Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}

Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}

Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}

Procedure for Adding Filtration Capability to Solvent Stands {0680}
Procedure for Adding Filtration Capability to Solvent Stands {0680}

Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Diesel Fuel Cleanliness Analysis By Automatic Particle Counting {0680, 1250, 1280}
Diesel Fuel Cleanliness Analysis By Automatic Particle Counting {0680, 1250, 1280}

Testing and Adjusting

Manifold Gauge Set (Refrigerant) - Install
Air Conditioning and Heating R134a for All Cat Machines

Manifold Gauge Set (Refrigerant) - Remove
Air Conditioning and Heating R134a for All Caterpillar Machines

Bench Test Procedures

Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}

Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Underground Articulated Trucks {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Underground Articulated Trucks {0372, 1000, 7000, 753S, 7565}

Troubleshooting

Required Tools
Air Conditioning and Heating R134a for All Caterpillar Machines

Service Magazine

Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

New Ejector Cylinder Seal Installation Tooling Now Available for Underground Articulated Ejector Trucks {0699, 5305}
New Ejector Cylinder Seal Installation Tooling Now Available for Underground Articulated Ejector Trucks {0699, 5305}

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog AD30 :

266-8729 SERVICE GP-FILTER

266-8178 SERVICE GP-FILTER

266-8105 SERVICE GP-FILTER

266-7787 SERVICE GP-FILTER

Truck sale:

Caterpillar AD30
- Petroleum Engines
MADISA

Caterpillar AD30, Off Highway Trucks, Construction

Call

2017 CAT AD30

TIM MCDOWELL EQUIP LTD

USD $206,704

CAT AD30

Worthy Parts

$168,400 USD

CATERPILLAR AD30 2013
- UNDERGROUND ARTICULATED TRUCK
FINNING CANADA
Canada