POWER TRAIN
DRIVE GPPOWER TRAIN
COUPLING GPDRIVE GP
WHEEL GP
POWER TRAIN
DRIVE GP
#SEBP64330250
345-6402: MOTOR & MTG GP-HYDROSTATIC
345-6402 MOTOR & MTG GP-HYDROSTATIC -2-SPEED
S/N HR61-UP; HRD1-UP
PART OF 421-0013, 421-0014 CONFIGURATION AR
AN ATTACHMENT
S/N HR61-UP; HRD1-UP
PART OF 421-0013, 421-0014 CONFIGURATION AR
AN ATTACHMENT
For full view, you need register
Parts for your 226D SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 262-3764 Y | [2] | SENSOR GP-SPEED (MOTOR) | |
| 2. | 358-5011 Y | [1] | MOTOR GP-PISTON (2-SPEED, LH) | |
| 3. | 358-5013 Y | [1] | MOTOR GP-PISTON (2-SPEED, RH) | |
| 4. | 439-2323 | [48] | WASHER-HARD (15.5X30.16X4.76-MM THK) | |
| 5. | 170-6705 M | [2] | BOLT-SOCKET HEAD (M8X1.25X12-MM) | |
| 6. | 8T-0226 M | [24] | BOLT (M14X2X45-MM) | |
| 7. | 6F-4718 | [2] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP64330251
358-5009: MOTOR GP-PISTON
358-5009 MOTOR GP-PISTON -RADIAL
S/N HR61-UP; HRD1-UP
PART OF 345-6401 MOTOR & MTG GP-HYDROSTATIC
AN ATTACHMENT
S/N HR61-UP; HRD1-UP
PART OF 345-6401 MOTOR & MTG GP-HYDROSTATIC
AN ATTACHMENT
For full view, you need register
Parts for your 226D SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 437-4249 | [1] | VALVE GP-FLUSHING | |
| 2. | 386-6607 | [1] | KIT-BEARING | |
| (INCLUDES PARTS MARKED "J" IN GRAPHIC) | ||||
| 3. | 386-6608 | [1] | KIT-BRAKE | |
| 4. | 3K-0360 | [1] | SEAL-O-RING | |
| 5. | 8T-0341 M | [10] | BOLT-SOCKET HEAD (M10X1.5X60-MM) | |
| 6. | 101-7400 M | [2] | BOLT-SOCKET HEAD (M10X1.5X110-MM) | |
| 7. | 6V-8200 M | [10] | BOLT-SOCKET HEAD (M12X1.75X35-MM) | |
| 8. | 9S-8005 | [1] | PLUG (3/4-16-THD) | |
| 9. | 441-5120 | [1] | KIT-RETAINER | |
| (INCLUDES PARTS MARKED "L"IN GRAPHIC)) | ||||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 386-6609 | [1] | KIT-SEAL | ||
| (INCLUDES SEALS, SNAP RING, SHIMS, PLUG, BRAKE COVER, BACKUP RINGS, BUSHING & O-RING SEALS) | ||||
| M | METRIC PART | |||
#SEBP64330252
358-5011: MOTOR GP-PISTON
358-5011 MOTOR GP-PISTON -2-SPEED, LH
S/N HR61-UP; HRD1-UP
PART OF 345-6402 MOTOR & MTG GP-HYDROSTATIC
AN ATTACHMENT
S/N HR61-UP; HRD1-UP
PART OF 345-6402 MOTOR & MTG GP-HYDROSTATIC
AN ATTACHMENT
For full view, you need register
Parts for your 226D SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 535-7937 | [1] | KIT-BEARING | |
| (INCLUDES TAPERED BEARINGS, SEALS, RETAINER RING &SHIM KIT) | ||||
| 2. | 437-4249 | [1] | VALVE GP-FLUSHING | |
| 3. | 280-7840 | [1] | KIT-BRAKE | |
| (INCLUDES SPRING & PARTS MARKED "L" IN GRAPHICS | ||||
| 4. | 341-7647 | [1] | VALVE GP-SPEED CONTROL (2-SPEED) | |
| 5. | 339-0443 | [1] | KIT-RETAINER | |
| (INCLUDES CLIPS & GUIDES) | ||||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 280-7849 | [1] | KIT-SEAL | ||
| (INCLUDES O-RING SEALS, SEALS, BACKUP RINGS,PLUG SEAL, RETAINING PIN, RETAINING RING & DOWEL PIN) | ||||
#SEBP64330253
358-5013: MOTOR GP-PISTON
358-5013 MOTOR GP-PISTON -2-SPEED, RH
S/N HR61-UP; HRD1-UP
PART OF 345-6402 MOTOR & MTG GP-HYDROSTATIC
AN ATTACHMENT
S/N HR61-UP; HRD1-UP
PART OF 345-6402 MOTOR & MTG GP-HYDROSTATIC
AN ATTACHMENT
For full view, you need register
Parts for your 226D SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 535-7937 | [1] | KIT-BEARING | |
| (INCLUDES SEALS, TAPERED BEARINGS, RETAINER RING & SHIM KIT) | ||||
| 2. | 437-4249 | [1] | VALVE GP-FLUSHING | |
| 3. | 280-7840 | [1] | KIT-BRAKE | |
| (INCLUDES SPRING & PARTS MARKED "L"IN GRAPHIC) | ||||
| 4. | 341-7647 | [1] | VALVE GP-SPEED CONTROL | |
| 5. | 339-0443 | [1] | KIT-RETAINER | |
| (INCLUDES CLIPS & GUIDES) | ||||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 280-7849 | [1] | KIT-SEAL | ||
| (INCLUDES SEAL DUST, SEAL SHAFT, O RINGS, PS SEAL RING SET, SEAL SINUS, BACKUP RINGS, SEAL PLUG, PIN RETAINING, RING RETAINING & PIN DOWEL) | ||||
#SEBP64330254
416-5676: MOUNTING GP-PUMP
For full view, you need register
#SEBP64330255
416-5676: MOUNTING GP-PUMP
416-5676 MOUNTING GP-PUMP
S/N HR61-UP; HRD1-UP
PART OF 416-5701 INSTALLATION AR-ENGINE
S/N HR61-UP; HRD1-UP
PART OF 416-5701 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 226D SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 444-6066 C | [1] | PLATE-ADAPTER | |
| 2. | 416-5694 | [1] | COUPLING | |
| 3. | 1B-2790 | [8] | BOLT (5/16-18X1.375-IN) | |
| 4. | 5S-7382 | [10] | BOLT (3/8-16X1.375-IN) | |
| 5. | 8T-2501 C | [2] | BOLT (3/8-16X2-IN) | |
| 6. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 8T-4896 C | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP64330256
358-4975: PUMP & MTG GP-HYDROSTATIC
358-4975 PUMP & MTG GP-HYDROSTATIC
S/N HR61-UP; HRD1-UP
PART OF 418-6000 HYDRAULIC AR
S/N HR61-UP; HRD1-UP
PART OF 418-6000 HYDRAULIC AR
For full view, you need register
Parts for your 226D SKID STEER LOADER:
CATERPILLAR SIS#SEBP64330257
378-2822: PUMP GP-PISTON
378-2822 PUMP GP-PISTON -HYDROSTATIC
S/N HR61-UP; HRD1-UP
PART OF 358-4975 PUMP & MTG GP-HYDROSTATIC
S/N HR61-UP; HRD1-UP
PART OF 358-4975 PUMP & MTG GP-HYDROSTATIC
For full view, you need register
Parts for your 226D SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 278-8737 | [2] | VALVE GP-PUMP CONTROL | |
| 2. | 378-2831 | [2] | KIT-SWASHPLATE | |
| 3. | 278-8748 | [1] | SHAFT-DRIVE | |
| 4. | 278-8751 J | [4] | SPRING | |
| 5. | 378-2832 | [1] | VALVE GP-RELIEF (CHARGE) | |
| 6. | 278-8743 | [1] | VALVE GP-SOLENOID (PARKING BRAKE) | |
| 7. | 278-8745 | [4] | KIT-RELIEF VALVE (CROSSOVER) | |
| (EACH INCLUDES RELIEF VALVES, O-RING SEALS, & SPRING) | ||||
| 8. | 278-8750 | [1] | PLATE (CCW) | |
| 9. | 278-8749 | [1] | PLATE (CW) | |
| 10. | 278-8747 | [1] | SHAFT-DRIVE | |
| 11. | 9S-8002 | [4] | PLUG (7/16-20-THD) | |
| 12. | 9S-8008 | [2] | PLUG (1-1/16-12-THD) | |
| 13. | 341-7637 | [2] | KIT-BEARING (PISTON PUMP) | |
| (EACH INCLUDES BEARING) | ||||
| 14. | 278-8739 | [2] | ROTATING GP-PUMP (VIBRATORY) | |
| 15. | 8C-3413 M | [6] | BOLT-SOCKET HEAD (M12X1.75X120-MM) | |
| 16. | 278-8744 | [4] | KIT-SOLENOID | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 278-8738 J | [2] | KIT-PISTON | ||
| 278-8736 | [1] | KIT-SEAL | ||
| (INCLUDES O-RING, PISTON SEAL RING, BACKUP RINGS, RETAINING RING, DOWEL PIN, SLOTTED PIN, GASKETS, SHAFT SEAL) | ||||
| 278-8742 | [1] | KIT-BEARING | ||
| (INCLUDES COUPLING, BEARING SLEEVES, RETAINING RINGS, & SHAFT BEARINGS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP64330258
142-7484: TIRE & RIM GP
142-7484 TIRE & RIM GP -LH
S/N HR61-UP; HRD1-UP
(16.5X8.25). DIRECTIONAL TIRE
PART OF 142-8666 WHEEL & TIRE AR
AN ATTACHMENT
S/N HR61-UP; HRD1-UP
(16.5X8.25). DIRECTIONAL TIRE
PART OF 142-8666 WHEEL & TIRE AR
AN ATTACHMENT
For full view, you need register
Parts for your 226D SKID STEER LOADER:
CATERPILLAR SIS#SEBP64330259
150-8592: TIRE & RIM GP
150-8592 TIRE & RIM GP -RH
S/N HR61-UP; HRD1-UP
(16.5X8.25). DIRECTIONAL TIRE
PART OF 142-8666 WHEEL & TIRE AR
AN ATTACHMENT
S/N HR61-UP; HRD1-UP
(16.5X8.25). DIRECTIONAL TIRE
PART OF 142-8666 WHEEL & TIRE AR
AN ATTACHMENT
For full view, you need register
